Aims. Treatment of Weber B ankle fractures that are stable on weightbearing radiographs but unstable on concomitant stress tests (classified SER4a) is controversial. Recent studies indicate that these fractures should be treated nonoperatively, but no studies have compared alternative nonoperative options. This study aims to evaluate patient-reported outcomes and the safety of fracture treatment using functional
In a survey of 6000 children between 9 and 10 years of age, 122 were found to have unilateral or bilateral hallux valgus. These children were randomly assigned to no treatment or to the use of a foot
Aims. The aim of this study was to compare the longer-term outcomes of operatively and nonoperatively managed patients treated with a removable brace (fixed-angle removable orthosis) or a plaster cast immobilization for an acute ankle fracture. Methods. This is a secondary analysis of a multicentre randomized controlled trial comparing adults with an acute ankle fracture, initially managed either by operative or nonoperative care. Patients were randomly allocated to receive either a cast immobilization or a fixed-angle removable
Vacuum orthoses are being applied in the care of patients with foot and lower leg conditions, as ankle fractures or sprains. The lower leg is protected and immobilized, which increases mobility. Due to the design, the orthoses lead to a difference in leg length, i.e. the side with the
Abstract. Objectives. This study aims to evaluate the functional outcomes of early weight-bearing in a functional
Myriad protocols exist for isolated Weber B lateral malleolus fractures with a congruent tibiotalar joint on initial radiographs. Stress and weight-bearing radiographs, all at various timepoints, may be employed to identify those injuries that develop significant talar shift but consensus is elusive. This study outlines a safe and reproducible protocol for such injuries, utilising a removable
Aims. The aim of this study was to compare the Push Ortho Thumb Brace
CMC and a custom-made
The Ponseti method of clubfoot management requires a period of bracing in order to maintain correction. This study compared the effectiveness of ankle foot orthoses and Denis Browne boots and bar in the prevention of recurrence following successful initial management. Between 2001 and 2003, 45 children (69 feet) with idiopathic clubfeet achieved full correction following Ponseti casting with or without a tenotomy, of whom 17 (30 clubfeet) were braced with an ankle foot
This nationwide prospective study was designed to determine prognostic factors and evaluate the outcome of different treatments of Perthes’ disease. A total of 28 hospitals in Norway were instructed to report all new cases of Perthes’ disease over a period of five years and 425 patients were reported and followed for five years. Of these, 368 with unilateral disease were included in the present study. The hips were classified radiologically according to a modified two-group Catterall classification and the lateral pillar classification. A total of 358 patients (97%) attended the five-year follow-up, when a modified three-group Stulberg classification was used as a radiological outcome measure. For patients over six years of age at diagnosis and with more than 50% necrosis of the femoral head (152 patients), the surgeons at the different hospitals had chosen one of three methods of treatment: physiotherapy (55 patients), the Scottish Rite abduction
Introduction. Charcot neuroarthropathy (CN) of foot and ankle presents significant challenges to the orthopaedic foot and ankle surgeon. Current treatment focuses on conservative management during the acute CN phase with offloading followed by deformity correction during the chronic phase. However, the deformity can progress in some feet despite optimal offloading resulting ulceration, infection, and limb loss. Our aim was to assess outcomes of primary surgical management with early reconstruction. Methods. Between December 2011 and December 2019, 25 patients underwent operative intervention at our specialist diabetic foot unit for CN with progressive deformity and or instability despite advanced offloading. All had peripheral neuropathy, and the majority due to diabetes. Twenty-six feet were operated on in total - 14 during Eichenholtz stage 1 and 12 during stage 2. Fourteen of these were performed as single stage procedures, whereas 12 as two-stage reconstructions. These included isolated hindfoot reconstructions in seven, midfoot in four and combined in 14 feet. Mean age at the time of operation was 54. Preoperative ulceration was evident in 14 patients. Results. Mean follow up was 45 months (Range 12–98). There was 100% limb salvage. One-year ambulation outcomes demonstrate FWB in bespoke footwear for 17 patients and in an ankle foot
Ponseti method has become the most common and validated initial non-operative and/or minimally invasive treatment modality of idiopathic clubfoot regardless of the severity of the deformity worldwide. Despite hundreds of publications in the literature favoring Ponseti method, the data about secondary procedures performed in the follow-up period of clubfoot and their incidence remains sparse and given as small details in the articles. The objective of this study was to analyse our incidence of secondary procedures performed in the midterm followup period of idiopathic clubfoot patients treated with Ponseti method and review of the relevant literature. For this purpose 86 feet of 60 patients with idiopathic clubfoot who were treated with original Ponseti method were enrolled in this retrospective case control study. Unilateral ankle foot
Deep vein thrombosis is a common complication
of immobilising the lower limb after surgery. We hypothesised that
intermittent pneumatic compression (IPC) therapy in outpatients
who had undergone surgical repair of acute ruptures of the Achilles
tendon could reduce the incidence of this problem. A total of 150 patients who had undergone surgical repair of
the Achilles tendon were randomised to either treatment with IPC
for six hours per day (n = 74) under an
The aim of this study was to identify factors independently associated with symptomatic venous thromboembolism (VTE) following acute Achilles tendon rupture (ATR), and to suggest a clinical VTE risk assessment tool for patients with ATR. From 2010–2018, 984 consecutive adults (median age 47yrs, 73% male) sustaining an ATR were retrospectively identified. There were 95% managed non-operatively (below-knee cast 52%, n=507/984; walking boot 44%, n=432/984), with 5% (n=45/984) undergoing primary operative repair (<6wks). VTE was diagnosed using medical records and national imaging archives, reviewed at a mean of 5yrs (1–10) post-injury. Regression was performed to identify factors independently associated with VTE. Incidence of VTE within 90 days of ATR was 3.6% (n=35/984; deep vein thrombosis 2.1% [n=21/984], pulmonary embolism 1.9% [n=19/984]). Age ≥50yrs (adjusted OR [aOR] 2.3, p=0.027), personal history of VTE/thrombophilia (aOR 6.1, p=0.009) and family history of VTE (aOR 20.9, p<0.001) were independently associated with VTE. These non-modifiable risk factors were incorporated into a VTE risk assessment tool. 23% of patients developing VTE (n=8/35) had a relevant personal or family history, but incorporating age into the tool identified 69% of patients with VTE (n=24/35). Non weight-bearing ≥2wks after ATR was also independently associated with VTE (aOR 3.2, p=0.026). Age ≥50 years, personal history of VTE/thrombophilia and a positive family history were independently associated with VTE following ATR. Incorporating age into our suggested VTE risk assessment tool enhanced sensitivity in identifying at-risk patients. Early weight-bearing in an appropriate
A complete design-manufacturing process for delivering customized foot orthoses by means of digital technologies is presented. Moreover, this feasibility study aims to combine a semi-automatic modelling approach with the use of low-cost devices for 3D scanning and 3D printing. In clinical practice, traditional methods for manufacturing customized foot orthoses are completely manual, mainly based on plaster casting plus hand fabrication, and are widely used among practitioners. Therefore, results depend on skills and expertise of individual orthoptists and podiatrists that need considerable training and practice in order to obtain optimal functional devices. On the other side, novel approaches for design and manufacturing customized foot orthoses by means of digital technologies (generally based on 3D scanning, 3D modelling and 3D printing) are recently reported as a valid alternative method to overcome these limitations. This study has been carried out in an interdisciplinary approach between the staff of Design and Methods in Industrial Engineering and the staff of Podology with the aim to assess the feasibility of a novel user-friendly and cost-effective solution for delivering customized functional foot orthoses. More specifically, a Generative Design (GD) workflow has been developed to enable practitioners without enough CAD skills to easily 3D modelling and interactively customize foot orthoses. Additionally, low-cost devices for 3D scanning and 3D printing that have been acquired by the Podology Lab, were also tested and compared with the high-cost ones of the Department of Industrial Engineering. The complete process is divided into three main steps. The first one regards the digitization of the patient's foot by means of 3D laser scanner devices. Then a user-friendly 3D modelling approach, developed for this purpose as GD workflow, allows interactively generating the customized foot
A key factor delaying rehabilitation after a tendo Achillis (TA) rupture is gait abnormality. We quantified changes in planter pressures after a rupture of the TA in four groups of patients:. 15 controls subjects, mean 40 years, with no history of lower limb abnormality. 14 patients, mean 48 years, treated in a non-weight-bearing plaster cast. 12 patients, mean age 45 years, treated with immediate weight-bearing in a ‘rigid’
Background: Non-operative treatment for plantar fasciitis varies widely and includes the use of night ankle-foot orthoses (AFO’s). Some studies have shown that this is more effective in the initial management of plantar fasciitis than anti-inflammatory therapy. During sleep the foot and ankle tend to assume a plantarflexed position, which results in tightness of the calf muscle group, accounting for the stiffness and pain experienced by patients as they take their first weight bearing steps in the morning. However, when the foot and ankle are kept in a dorsiflexed stretched position at night, stress relaxation occurs and the plantar fascia relaxes. Aim: Compliance with night AFO’s that dorsiflex the foot/ankle has always been a problem. This study compares the effectiveness of a posterior AFO, which dorsiflexes the foot, with an anterior AFO, which maintains the foot in plantigrade, asking whether it is absolutely necessary to dorsiflex the foot and ankle during the night to avoid early morning pain and stiffness, or whether it is it sufficient just to maintain the foot in plantigrade. Methods: 18 participants were recruited on a voluntary basis and at random from among those patients referred to the Orthotics department with plantar fasciitis to be provided with a night
Aims. The purpose of this study was to analyze the incidence of the different ultrasound phenotypes of developmental dysplasia of the hip (DDH), and to determine their subsequent course. Patients and Methods. A consecutive series of 28 092 neonates was screened and classified according to the Graf method as part of a nationwide surveillance programme, and then followed prospectively. Abnormal hips were followed until they became normal (Graf type I). Type IIb hips and higher grades were treated by abduction in a Tübinger
The August 2015 Foot &
Ankle Roundup. 360 . looks at: Is
Introduction: A comparison of the success of the thoracolumbosacral
The aim of this study is to evaluate the efficacy of the use of the dynamic hip