Introduction: The majority of midshaft humeral fractures will achieve a satisfactory outcome with non-operative management. However, internal fixation is occasionally required to assist with rehabilitation, particularly in multiply-injured patients. Although the clinical risks and benefits of the locking plate and humeral nail are well known, there is a paucity of data comparing their mechanical properties. The aim of this study was to determine the torsional and 4-point bending properties of a midshaft humeral osteotomy reconstructed with either an intramedullary nail or locking plate. Methods: 19 fresh cadaveric humeri were DEXA scanned to ensure similar BMD. Non-destructive 4-point bending was performed on the intact bone to determine stiffness in the sagittal and coronal planes. Load was applied using an MTS MiniBionix 858 (Mechanical Testing Systems, MN) at a rate of 1 mm/min to a maximum of 450 N. A transverse midshaft osteotomy was created and a spacer ensured a constant 3-mm gap between the bone ends. Reconstruction was performed with either. Trigen humeral nail (Smith & Nephew, TN) – 10 specimens. Humeral locking plate (Synthes, PA) – 9 specimens. Non-destructive 4-point bending was repeated, and then each humerus was embedded in a low-melting point alloy proximally and distally for torsional testing. Torque was applied at 5 deg/min until failure. Maximum torque, maximum angle and stiffness were calculated. All data were analysed with SPSS for Windows (SPSS Inc., Il) using ANOVA. Results: One specimen in the locking plate group fractured during plate application and was excluded from the study. Non-destructive bending tests showed no significant difference in stiffness of the intact bones between the two groups. 4-point bending: the bones reconstructed with the intramedullary nail were ~50% as stiff as the intact state in both planes. There was no statistically significant difference in stiffness between the intact bones and those reconstructed with the locking plate. Torsional testing: the locking plate specimens were 3 times as stiff as the intramedullary nail specimens (P< 0.05) and failed at twice the torque (P< 0.05). Discussion: Humeral intramedullary nails are reported to have an advantage over plates under axial loading (Chen et al, 2002). However, this study demonstrates that locking plates are superior to intramedullary nails in torsion and four-point bending. Although the clinical situation often dictates the most appropriate management, locking plates should be considered in patients when torsional or four-point bending loads are expected to predominate in the post-operative period

This study aimed to evaluate the effect of clavicular shortening, measured by three-dimensional computerized tomography (3DCT), on functional outcomes and satisfaction in patients with healed, displaced, midshaft clavicle fractures up to one year following injury. The data used in this study were collected as part of a multicenter, prospective randomized control trial comparing open reduction and plate fixation with nonoperative treatment for displaced midshaft clavicle factures. Patients who were randomized to nonoperative treatment and who had healed by one year were included. Clavicle shortening relative to the uninjured contralateral clavicle was measured on 3DCT. Outcome analysis was conducted at six weeks, three months, six months and one year following injury and included the Disabilities of the Arm, Shoulder and Hand (DASH), Constant and Short Form-12 (SF-12) scores, and patient satisfaction. 48 patients were included. The mean shortening of injured clavicles, relative to the contralateral side, was 11mm (+/− 7.6mm) with a mean proportional shortening of 8percnt;. Proportional shortening did not significantly correlate with the DASH (p>0.42), Constant (p>0.32) or SF-12 (p>0.08) scores at any time point. There was no significant difference in the mean DASH or Constant scores at any followup time point both when the cut off for shortening was defined as one centimeter (p>0.11) or two centimeters (p>0.35). There was no significant difference in clavicle shortening between satisfied and unsatisfied patients (p>0.49). This study demonstrated no association between shortening and functional outcome or satisfaction in patients with healed, displaced, midshaft clavicle fractures up to one year following injury

Purpose: The purpose of this study is to evaluate the biomechanical properties and the stability between locking clavicle plate, dynamic compression plate and external fixation systems on an unstable displaced fracture model under torsional and 3 point bending loading. Materials and Methods: Forty eight human adult formalin fixed clavicles were paired according to their BMD (DEXA) homogeneously into three groups; Group 1: Locking clavicle plate, Group 2: Dynamic compression plate and Group 3: External fixator. Each specimen was then osteotomized in the midshaft; and a 5mm bone segment was removed in order to stimulate a displaced fracture model. Biomechanical tests were applied in a cyclic loading model in MTS, Bionix 2. Torsional and three point bending forces were performed for 1000 cycles in all subgroups, stiffness was recorded at 10 cycles (initial) and periodic every 100 cyclic intervals. Failure load and moment were obtained after 1000 cycles. Initial stiffness, failure loads and the percentage of initial stiffness for each subgroup were compared across each group. One-way ANOVA and Bonferoni post- hoc tests were utilized to determine which were significantly different from one another with the significance level set as p< 0.05. Results: The mean initial stiffness(Nmm/deg) - mean failure moments(Nmm) for torsional tests were 703.2 – 7671.7 (locking plate), 448.1 – 4370.3 (compression plate), 365.2 – 2999.7 (ex-fix) and the mean initial stiffness(Nmm) – mean failure loads(N) for bending tests were 32.6 – 213.2 (locking plate), 23.4 – 131.1 (compression plate), 20.6 – 102.7 (ex-fix) respectively. ANOVA test confirmed an overall significant difference between the three constructs in terms of both failure loads and a significant difference only between locking plate and others in terms of initial stiffness. At all cyclic intervals after 100 cycles there was significant difference of percentage of initial stiffness between locking plate and others in bending and torsion. There was a significant difference between compression plate and ex-fix after 700 cycles in torsional group and no difference found in bending group between (any of) them at any cyclic interval. Conclusions: Locking anatomic clavicle plate is significantly more stable than unlocked dynamic compression plate and external fixator under torsional and bending cyclic loading in an unstable displaced fracture or non-union clavicle model

The primary aim of this study was to undertake a cost-effectiveness analysis (CEA) of acute fixation versus conservative management of displaced midshaft clavicle fractures. The secondary aim was to conduct a sensitivity analysis of patient characteristics that may influence a threshold of £20,000 per quality-adjusted life year gained (QALY).

A CEA was conducted from a randomised control trial comparing conservative management (n=92) to acute plate fixation (n=86) of displaced midshaft clavicle fractures. The incremental cost effectiveness ratio (ICER) was used to express the cost per QALY. The short form 6-dimensional (SF-6D) score was the preference based index to calculate the cost per QALY.

The 12-month SF-6D advantage of acute fixation over conservative management was 0.0085 (p=0.464) with a mean cost difference of £4,096.22 and resultant ICER of £481,908.24/QALY. For a threshold of £20,000/QALY the benefit of acute fixation would need to be present for 24.1 years. Linear regression analysis identified nonunion as the only independent factor to influence the SF-6D at 12-months (p<0.001). Conservatively managed fractures that resulted in a nonunion (n=16) had a significantly worse SF-6D compared to acute fixation (0.0723, p=0.001) with comparable healthcare cost at 12-months (£170.12 difference). Modelling the ICER of acute fixation against those complicated by a nonunion proved to be cost effective at £2,352.97/QALY at 12-months.

Routine plate fixation of displaced midshaft clavicle fractures is not cost-effective. Patients with nonunion after conservative management have increased morbidity with comparable expense to those undergoing acute fixation which suggests targeting these patients is a more cost-effective strategy.

We treated 110 fractures of the middle third of the clavicle in 108 patients aged between 14 and 66 years, by fixation with 2 mm Kirschner wires.

The wire was introduced, using an air drill and a telescoping guide, from the medial into the lateral fragment. The medial end of the wire which perforated the anterior cortex of the medial fragment was bent backwards to prevent migration into the lung or mediastinum.

In cases of nonunion and acute fracture in which a bone gap was present, bone graft was laid around the fracture site after internal fixation. All the fractures united. No wires broke but in three patients one migrated before union was achieved. Twenty-one patients failed to return for removal of the wire; nine of them had radiological evidence of union before they were lost to follow-up.

Aims

This study identifies early risk factors for symptomatic nonunion of displaced midshaft fractures of the clavicle that aid identification of an at risk group who may benefit from surgery.

The aim of this study was to assess the outcome of a pre-contoured anatomic plate in the treatment of midshaft clavicle fractures.

We treated thirty patients consecutively for middle third clavicle fractures between March 2001 to March 2006. Surgery was performed for acute fractures, non-unions and malunions by a senior surgeon.

Fifteen patients were treated by open reduction and internal fixation with a precontoured small fragment clavicle plate (mean age of thirty-eight years).

Our control group consisted of a consecutive series of fifteen patients treated by internal fixation with conventional plates (mean age of forty-one years). Ten patients had fixation of their clavicles with a reconstruction plate whilst five patients had fixation with a dynamic compression plate (DCP).

Outcomes assessed for both groups were; complications, need for removal of plate, post-operative outcome, and time to union.

All patients were followed up for an average of eighteen months (range eight to thirty months). In the pre-contoured plate group none required removal of hardware. Five patients had complications. Three of these patients complained of numbness around the caudal aspect of the wound which subsequently resolved within six to eight weeks of the operation. The remaining two patients suffered from adhesive capsulitis postoperatively. Their symptoms resolved completely after four months. All patients regained full range of motion. All patients went on to clinical and radiological union with average time to union being 4.7 months (range three to ten months).

In the conventional plate group, nine patients required removal of their plate. Average time to removal of plate from index operation was 7.7 months (range four to thirteen months). Of the nine plate removals there were two plate breakages, five removals for local soft tissue irritation and two persistent painful non-unions. Three patients required subsequent re-plating for non-unions. All fractures united in this group with mean time to union of 5.4 months (range 2 to 14 months).

A pre-contoured clavicle plate provides rigid fixation without compromising plate stiffness and fatigue strength. We have successfully treated patients with acute fractures, nonunions and malunions of midshaft clavicle fractures, where there was gross distortion of normal anatomy. None of our patients required the removal of their plates (minimum follow-up of 8 months). We have also found these plates to be a valuable anatomical template when reconstructing a malunion, nonunion or highly comminuted fracture.

In conclusion, this is the first reported series demonstrating the use of anatomical pre-contoured plates for clavicle fractures. They can reduce time spent on intra-operative contouring, are low-profile and thus far, plate removal has not been necessary.

Introduction

Plate fixations have been recommended for dislocated clavicle fractures. However, existing plates are inadequate for morphological compatibility with the clavicle. The aim of this study is to measure the anatomical shape of the clavicle and to compare the radiographical and clinical outcomes of our tree-dimensional (3D) reconstruction plate with conventional straight plate.

Background

Non-union has traditionally been considered a rare complication following the non-operative management of clavicle fractures. A growing body of evidence has demonstrated higher rates of non-union in adults with displaced fractures. However, the variables that predict non-union in these patients remain unclear. We evaluated the prevalence and risk factors for non-union following displaced midshaft clavicle fractures in a large consecutive series of patients managed non-operatively in our Unit.

Non-union has traditionally been considered a rare complication following the non-operative management of clavicle fractures. Recent studies demonstrate higher rates of non-union in adults with displaced fractures, yet the variables predicting non-union remain unclear. We evaluated the prevalence and risk factors for non-union following displaced midshaft clavicle fractures in a large consecutive series of patients managed non-operatively.

1097 consecutive adults (mean age 26.1yrs) with displaced midshaft clavicle fractures treated non-operatively in our Unit were included. All patients were interviewed, examined and underwent radiological assessment within a week of injury. All patients were managed in a sling for two weeks followed by early mobilization. All patients were followed-up until clinical and radiological confirmation of union. Non-union was defined clinically as pain or mobility of the fracture segments on stressing, and radiologically as failure of cortical bridging by 6 months.

198 (18%) of patients had evidence of non-union at 6 months. Patient factors associated with non-union included increasing age, smoking and the presence of medical comorbidities (p<0.05). Injury-related factors associated with non-union included increasing fragment translation and displacement, and injury pattern (Edinburgh 2B2: comminuted segmental fracture)(p<0.01).

We present the largest series reporting prevalence and risk factors for non-union following conservatively treated, displaced midshaft clavicle fractures. These fractures can no longer be viewed as a single clinical entity, but as a spectrum of injuries each requiring individualized assessment and treatment. Increased understanding of the outcomes of these injuries will enable clinicians to better identify those patients that may be better served with primary operative reconstruction.

Purpose: The aim of this nonrandomised retrospective study was to compare the results of anterior plating with superior plating in acute mid-shaft clavicular fractures.

Method: From 2000–2005, 49 fresh midshaft clavicular fractures in adults with shortening of > 20mm on the radiographs were treated with reconstruction plates. The placement of the plate on the clavicular surface was based on the preference of the surgeon operating. Patients were discharged within a day or two of the operation depending on pain control and were allowed to mobilise their shoulder within pain limits. They were followed up at six weeks and 12 weeks post operation and were allowed to return to work by 12 weeks if there was clinical and radiological signs of union. There were 22 patients in the anterior and 27 in the superior group. The mean age in the anterior was 36.3 years and 37.6 in the superior group. Majority(65%) of the fractures were sustained following RTA.77% were involved on the dominant side in both groups. The percent of patients in light and heavy manual work were similar in both groups. Follow up varied from six months to 24 months. Functional outcome was analysed by the physiotherapist with Biodex machine using Constant score and patient satisfaction questionnaire.

Results: There was no significant difference in Constant scores (Anterior=89, Superior=86), patient satisfaction with operation, return to activity and occupation in either groups. There was a total of six implant removals out of which five were in the superior group due to prominent metalware. There were two implant failures between six to 12 weeks post operation, both of which were in the superior group which were replated anteriorly. There was no significant difference in the deep/superficial infection in either groups. Return to work and satisfaction with operation were similar in both groups.

Conclusion: In our study, the incidence of hardware failure and hardware removal was significantly higher in the superior group compared to anterior group. Necessity for hardware removal becomes low as the anteriorly placed plate is less prominent. Also the risk of injuring the important neurovascular structures is less while drilling holes from anterior to posterior compared to superior to inferior direction. Hence we recommend anterior plating of the clavicle as a better method compared to superior plating of the clavicle.

Aims: A biomechanical and clinical study was made to compare two nonunion fixation device: the AO dynamic compresiòn plate and a locked intramedullary nail.

Methods: A retrospective review was made of all patients from three major hospitals in the Barcelona area with the diagnosis of aseptic non-union of the humeral shaft. After exclusion criteria series were limited to fifty-four patients, treated between 1992 and 2002. Of these, 35 were women and 19 were men with a median age of 55 (18–91) years. Operative treatment was with plate in 74.1% and locked nail in 25.9%. Statistical analysis was made to compare consolidation rate, consolidation time and complications in both devices and to looking for possible prognostic consolidation factors. We used the Finite element Method to compare the biomechanical behaviour between plate and nail.

Results: The consolidation rate was 78.6% with nail and 70.3% in plate, but this rate has significantly improved (p< 0.05) when plate is used in hypertrophic non-union and nail in atrophic union.

The median consolidation time was 5.73 months with nail and 4.92 months in plate.

The complication rate was 21.4% with nail and 20.0% in plate.

Focus deformation is lesser with nail than plate in anterior bending, axial charge and torsion but no in lateral bending.

Six or more cortical screws beside focus with plate increase consolidation too (p< 0.05).

The consolidation rate in graft group was 70.5% versus 85.7% in group without graft.

Conclusions: Plating provides better results in hypertrophic nonunions and nailing in atrophic nonunions.

Six or more cortical screws beside focus when plate is used improves consolidation rate.

Consolidation not seems be modified by graft use.

Midshaft clavicle fractures can be classified into simple or complex/comminuted. The hardest fracture to treat is the severely comminuted and displaced fracture. We retrospectively compared 286 consecutive operatively treated simple (2 and 3 part) fractures with the more complex comminuted (>=4 part) midshaft clavicle fractures, looking at outcome, complication rate and union rate.

Between 2008 and 2010 the senior author operated on 286 displaced midshaft clavicle fractures using a plate and screws. In this cohort there were 173 simple (2 and 3 part) fractures and 99 complex (>=4 part) fractures. The operation was performed through a limited incision technique and was standardized. All fractures were fixed with at least 3 screws on either side of the comminution. All patients were up until radiological and clinical union. A standardized questionnaire was used to assess patient satisfaction, return to work, sport and outcome at each postoperative visit. All complications were documented.

All fractures eventually went onto union. There were 242 males and 44 females with the average age being 33. The complex fractures had a larger scar, took longer to return to normal motion, work and sport, and took on average 10 weeks to unite compared to 6 weeks in the simple fractures. The infection rate in the simple fractures was 1% and in the complex fractures was 2%. The big difference was the incidence of non union in the complex fractures of 10% compared to 1%; the other main difference was postoperative shoulder stiffness of 3% at 3 months in the complex fractures compared to 1 % in the simple fractures. Plate elevation/irritation was also more prevalent in the complex fractures of 10% compared to 3%.

This study clearly shows there is a higher complication rate in complex fractures. Particular attention must be placed on surgical technique and anatomical reduction of these difficult fractures followed closely by postoperative rehabilitation. Future studies of clavicle fractures should specify the type of fracture being treated to give a better understanding of the potential outcome.

Purpose

There is increasing evidence that primary fixation of displaced mid-shaft fractures of the clavicle results in superior short-term outcomes when compared to traditional non-operative methods. However, the results from published studies are limited to relatively short-term (one year or less) follow-up. Accurate data of longer follow-up is important for a number of reasons, including patient prognostication, counseling and care, the design of future trials, and the economic analysis of treatment. The purpose of this paper was to examine the results of the two year follow up of patients enrolled in a previously published randomized clinical trial of operative versus non-operative treatment of displaced fractures of the clavicle.

This study aims to assess the fracture mechanics of type-2 diabetic (T2D) femoral bone using innovative site-specific tests, whilst also examining the cortical and trabecular bone microarchitecture from various regions using micro-computed tomography (CT) of the femur as the disease progresses. Male [Zucker Diabetic Fatty (ZDF: fa/fa) (T2D) and Zucker Lean (ZL: fa/+) (Control)] rats were euthanized at 12-weeks of age, thereafter, right and left femora were dissected (Right femora: n = 6, per age, per condition; Left femora: n=8-9, per age, per condition). Right femurs were notched in the posterior of the midshaft. Micro-CT was used to scan the proximal femur, notched and unnotched femoral midshaft (cortical) of the right femur and the distal metaphysis (trabecular) of the left femur to investigate microarchitecture and composition. Right femurs were fracture toughness tested to measure the stress intensity factor (Kic) followed by a sideways fall test using a custom-made rig to investigate femoral neck mechanical properties. There was no difference in trabecular and cortical tissue material density (TMD) between T2D and control rats. Cortical thickness was unchanged, but trabeculae were thinner (p<0.01) in T2D rats versus controls. However, T2D rats had a greater number of trabeculae (p<0.05) although trabecular spacing was not different to controls. T2D rats had a higher connectivity distribution (p<0.05) and degree of anisotropy (p<0.05) in comparison to controls. There was no difference in the mechanical properties between strains. At 12-weeks of age, rats are experiencing early-stage T2Ds and the disease impact is currently not very clear. Structural and material properties are unchanged between strains, but the trabecular morphology shows that T2D rats have more trabecular struts present in order to account for the thinner trabeculae

Total hip arthroplasty (THA) for congenital hip dysplasia (CDH) presents a challenge. In high-grade CDH, key surgical targets include cup placement in the anatomical position and leg length equality. Lengthening of more than 4 cm is associated with sciatic nerve injury, therefore shortening osteotomies are necessary. We present our experience of different shortening osteotomies including advantages and disadvantages of each technique. 89 hips, in 61 pts (28 bilateral cases), for high CDH were performed by a single surgeon from 1997 to 2022. 67 patients were female and 22 were male. Age ranged from 38 to 68 yrs. In all patients 5–8cm of leg length discrepancy (LLD) was present, requiring shortening femoral osteotomy. 12 patients underwent sequential proximal femoral resection with trochanteric osteotomy, 46 subtrochanteric, 6 midshaft, and 25 distal femoral osteotomies with simultaneous valgus correction were performed. All acetabular prostheses were placed in the true anatomical position. We used uncemented high porosity cups. Patients were followed up for a minimum of 12 months. All osteotomies healed uneventfully except 3 non-unions of the greater trochanter in the proximal femur resection group. No femoral shaft fractures in proximally based osteotomies. No significant LLD compared to the unaffected or reconstructed side. 2 patients suffered 3 and 5 degrees malrotation of the femur in the oblique sub-trochanteric group. 3 patients suffered transient sciatic nerve palsies. Shortening femoral osteotomies in the treatment of DDH are necessary to avoid injury to the sciatic nerve. In our series, we found transverse subtrochanteric osteotomies to be the most technically efficient, versatile and predictable in their clinical outcome, due to the ability to correct rotation and preserve the metaphyseal bone integrity, allowing for better initial stem stability. Distal femoral osteotomies allowed for controllable correction of valgus knee deformity

The need for an artificial scaffold in very large bone defects is clear, not only to limit the risk of graft harvesting, but also to improve clinical success. The use of custom osteoconductive scaffolds made from biodegradable polyester and ceramics can be a valuable patient friendly option, especially in case of a concomitant infection. Multiple types of scaffolds for the Masquelet procedure (MP) are available, however these frequently demonstrate central graft involution when defects exceed a certain size and the complication rates remains high. This paper describes three infected tibial defect nonunions with a segmental defect over ten centimeters long treated with a customized 3D printed polycaprolactone-tricalcium phosphate (PCL-TCP) cage in combination with biological adjuncts. Three male patients, between the age of 37 and 47, were treated for an infected tibial defect nonunion after sustaining Gustilo grade 3 open fractures. All had a segmental midshaft bone defect of more than ten centimeters (range 11–15cm). First stage MPs consisted of extensive debridement, external fixation and placement of anterior lateral thigh flaps (ALT). Positive cultures were obtained from all patients during this first stage, that were treated with specific systemic antibiotics during 12 weeks. The second stage MP was carried out at least two months after the first stage. CT scans were obtained after the first stage to manufacture defect-specific cages. In the final procedure a custom 3D printed PCL-TCP cage (Osteopore, Singapore) was placed in the defect in combination with biological adjuncts (BMAC, RIA derived autograft, iFactor and BioActive Glass). Bridging of the defect, assessed at six months by CT, was achieved in all cases. SPECT-scans 6 months post-operatively demonstrated active bone regeneration, also involving the central part of the scaffold. All three patients regained function and reported less pain with full weight-bearing. This case report shows that 3D printed PCL-TCP cages in combination with biological adjuncts is a novel addition to the surgical treatment of very large bone defects in (infected) posttraumatic nonunion of the tibia. This combination could overcome some of the current drawbacks in this challenging indication

Aims. The purpose of this study was to determine whether intracellular Staphylococcus aureus is associated with recurrent infection in a rat model of open fracture. Methods. After stabilizing with Kirschner wire, we created a midshaft femur fracture in Sprague-Dawley rats and infected the wound with green fluorescent protein (GFP)-tagged S. aureus. After repeated debridement and negative swab culture was achieved, the isolation of GFP-containing cells from skin, bone marrow, and muscle was then performed. The composition and viability of intracellular S. aureus in isolated GFP-positive cells was assessed. We suppressed the host immune system and observed whether recurrent infection would occur. Finally, rats were assigned to one of six treatment groups (a combination of antibiotic treatment and implant removal/retention). The proportion of successful eradication was determined. Results. Green fluorescent protein-containing cells were successfully isolated after the swab culture was negative from skin (n = 0, 0%), muscle (n = 10, 100%), and bone marrow (n = 10, 100%) of a total of ten rats. The phagocytes were predominant in GFP-positive cells from muscle (73%) and bone marrow (81%) with a significantly higher viability of intracellular S. aureus (all p-values < 0.001). The recurrent infection occurred in up to 75% of rats after the immunosuppression. The proportion of successful eradication was not associated with implant retention or removal, and the efficacy of linezolid in eradicating intracellular S. aureus is significantly higher than that of vancomycin. Conclusion. Intracellular S. aureus is associated with recurrent infection in the rat model of open fracture. Usage of linezolid, a membrane-permeable antibiotic, is an effective strategy against intracellular S. aureus. Cite this article:Bone Joint Res. 2020;9(2):71–76

1. Sections were cut from the third metacarpal, the radius, the femur and the third lumbar vertebra of thirty-four male and twenty-one female cadavera. The mineral content of these different specimens was measured by ashing and the relationships between the quantity of bone mineral present at these sites were examined. 2. In the females the whole bone density and mineral/unit length at both the midshaft metacarpal and the midshaft radius correlated significantly with the whole bone density at all the other sites. 3. In the males these correlations were much less significant and no significant correlation was found between the whole bone density of either the metacarpal midshaft or the radial midshaft and that of the third lumbar vertebra or the distal femur, although a highly significant correlation was found between those of the distal femur and the lumbar vertebra. 4. It is suggested that in women, measurements of either mineral/unit length or whole bone density of both the midshaft metacarpal and radius provide useful information on the whole bone densities at other sites throughout the skeleton. This work was supported by the Scottish Hospital Endowments Research Trust, the National Fund for Research into Crippling Diseases and G. D. Searle and Co. Ltd., High Wycombe

The aim of this study was to define the long-term outcome following adolescent clavicle fracture. We retrospectively reviewed all adolescent fractures presenting to our region (13–17years) over a 10-year period. Patient reported outcomes were undertaken at a minimum of 4 years post-injury (QuickDASH and EQ-5D) in completely displaced midshaft fractures (Edinburgh 2B, >2cm displacement, n=50) and angulated midshaft fractures (Edinburgh 2A2, >30 degrees angulation, n=32). 677 clavicle fractures were analysed. The median age was 14.8 (IQR 14.0–15.7) and 89% were male. The majority were midshaft (n=606, 89.5%) with either angulation (39.8%) or simple fully displaced (39.1%). Only 3% of midshaft fractures underwent acute fixation (n=18/606), all of which were fully displaced. The incidence of refracture following non-operative management of midshaft fractures was 3.2% (n=19/588), all united with non-operative management. Fracture type, severity of angulation or displacement was not associated with risk of refracture. There was one case of non-union encountered following non-operative management of all displaced midshaft fractures (0.4%, n=1/245). At a mean of 7.6 years following injury, non-operative management of both displaced and angulated fractures had a median QuickDASH was 0.0 (IQR 0.0–2.3), EQ-5D was 1.0 (IQR 1.0–1.0). 97% of angulated fractures and 94% of displaced fractures were satisfied with their final shoulder function. We conclude that Non-operative management of adolescent midshaft clavicle fractures result in excellent functional outcomes with a low rate of complications at long-term follow up. The relative indications for surgical intervention for clavicle fractures in adults do not appear to be applicable to adolescents