Background. One of the basic principles in the primary survey of a trauma patient is immobilisation of the cervical spine till cleared of any injury. Lateral cervical spine radiograph is the gold standard initial radiographic assessment. More than often additional radiographs like the Swimmer's view are necessary for adequate visualisation of the cervical spine. How good is the Swimmer's view in visualisation of the cervical spine after an inadequate lateral cervical spine radiograph?. Materials & methods. 100 Swimmer's view radiographs randomly selected over a 2 year period in trauma patients were included for the study. All the patients had inadequate lateral cervical spine radiographs. The radiographs were assessed with regards to their adequacy by a single observer. The criteria for adequacy were adequate visualisation of the C7 body, C7/T1 junction and the soft tissue shadow. Results. Only 55% of the radiographs were adequate. None of the inadequate radiographs provided adequate visualisation of the C7 body and the C7/T1 junction. In 19% radiographs the soft tissue shadow was unclear. Poor exposure accounted for 53% of the inadequacies while overlapping bones accounted for the rest. Conclusion. Clearing the cervical spine prior to removing triple immobilisation is essential in a trauma patient. This needs adequate visualisation from C1 to C7/T1 junction. In our study Swimmer's views did not satisfactorily provide adequate visualisation of the cervical spine in trauma patients. We recommend screening the cervical spine by a CT scan when the cervical spine lateral radiographs and Swimmer's views are inadequate

This study aims to implement and assess the inter and intra-reliability of a modernised radiolucency assessment system; the Radiolucency In cemented Stemmed Knee (RISK) arthroplasty classification. Furthermore, we assessed the distribution of regions affected by radiolucency in patients undergoing stemmed cemented knee arthroplasty. Stemmed knee arthroplasty cases over 7-year period at a single institution were retrospectively identified and reviewed. The RISK classification system identifies five zones in the femur and five zones in the tibia in both the anteroposterior (AP) and lateral planes. Post-operative and follow-up radiographs were scored for radiolucency by four blinded reviewers at two distinct time points four weeks apart. Reliability was assessed using the kappa statistic. A heat map was generated to demonstrate the reported regions of radiolucency. 29 cases (63 radiographs) of stemmed knee arthroplasty were examined radiographically using the RISK system. Intra-reliability (0.83) and Inter-reliability (0.80) scores were both consistent with a strong level of agreement using the kappa scoring system. Radiolucency was more commonly associated with the tibial component (76.6%) compared to the femoral component (23.3%), and the tibial anterior-posterior (AP) region 1 (medial plateau) was the most affected (14.9%). The RISK classification system is a reliable assessment tool for evaluating radiolucency around stemmed knee arthroplasty using defined zones on both AP and lateral radiographs. Zones of radiolucency identified in this study may be relevant to implant survival and corresponded well with zones of fixation, which may help inform future research

Introduction. Recent technological advancements have led to the introduction of robotic-assisted total knee arthroplasty to improve the accuracy and precision of bony resections and implant position. However, the in vivo accuracy is not widely reported. The primary objective of this study is to determine the accuracy and precision of a cut block positioning robotic arm. Method. Seventy-seven patients underwent total knee arthroplasty with various workflows and alignment targets by three arthroplasty-trained surgeons with previous experience using the ROSA® Knee System. Accuracy and precision were determined by measuring the difference between various workflow time points, including the final pre-operative plan, validated resection angle, and post-operative radiographs. The mean difference between the measurements determined accuracy, and the standard deviation represented precision. Results. The accuracy and precision for all angles comparing the final planned resection and validated resection angles was 0.90° ± 0.76°. The proportion within 3° ranged from 97.9% to 100%. The accuracy and precision for all angles comparing the final intra- operative plan and post-operative radiographs was 1.95 ± 1.48°. The proportion of patients within 3° was 93.2%, 95.3%, 96.6%, and 71.4% for the distal femur, proximal tibia, femoral flexion, and tibial slope angles when the final intra-operative plan was compared to post-operative radiographs. No patients had a postoperative complication requiring revision at the final follow-up. Conclusions. This study demonstrates that the ROSA Knee System has accurate and precise coronal plane resections with few outliers. However, the tibial slope demonstrated decreased accuracy and precision were measured on post-operative short-leg lateral radiographs with this platform

Long femoral nails for neck of femur fractures and prophylactic fixation have a risk of anterior cortex perforation. Previous studies have demonstrated the radius of curvature (ROC) of a femoral nail influencing the finishing point of a nail and the risk of anterior cortex perforation. This study aims to calculate a patients femoral ROC using preoperative XR and CT and therefore nail finishing position. We conducted a retrospective study review of patients with long femoral cephalomedullary nailing for proximal femur fractures (OTA/AO 31(A) and OTA/AO 32) or impending pathological fractures at a level 1 trauma centre between January 1, 2015 and December 31, 2020 with both full length lateral X-ray and CT imaging. Femoral ROC was calculated on both imaging modalities. Outcomes measured including nail finishing position, anterior cortex encroachment and impingement. The mean femoral ROC was 1026mm on CT and 1244mm on XR. CT femoral ROC strongly correlated with nail finishing point with a spearmans coefficient of 0.77. Additionally, femurs with a ROC <1000mm were associated with a higher risk of anterior encroachment (OR 6.12) and femurs with a ROC <900mm were associated with a higher risk of anterior cortex impingement (OR 6.47). To our knowledge this is the first study to compare a measured femoral ROC to nail finishing position. The use of CT to measure femoral ROC and to a lesser extent XR was able to predict both nail finishing position and risk of anterior cortex encroachment. Preoperative XRs and CTs were able to identify patients with a small femoral ROC. This predicted patients at risk of anterior cortex impingement, anterior cortex encroachment and nail finishing position. We may be able to select femoral nails that resemble the native femoral ROC and mitigate the risk of anterior cortex perforation

A stiff spine leads to increased demand on the hip, creating an increased risk of total hip arthroplasty (THA) dislocation. Several authors propose that a change in sacral slope of ≤10° between the standing and relaxed-seated positions (ΔSSstanding→relaxed-seated) identifies a patient with a stiff lumbar spine and have suggested use of dual-mobility bearings for such patients. However, such assessment may not adequately test the lumbar spine to draw such conclusions. The aim of this study was to assess how accurately ΔSSstanding→relaxed-seated can identify patients with a stiff spine. This is a prospective, multi-centre, consecutive cohort series. Two-hundred and twenty-four patients, pre-THA, had standing, relaxed-seated and flexed-seated lateral radiographs. Sacral slope and lumbar lordosis were measured on each functional X-ray. ΔSSstanding→relaxed-seated seated was determined by the change in sacral slope between the standing and relaxed-seated positions. Lumbar flexion (LF) was defined as the difference in lumbar lordotic angle between standing and flexed-seated. LF≤20° was considered a stiff spine. The predictive value of ΔSSstanding→relaxed-seated for characterising a stiff spine was assessed. A weak correlation between ΔSSstanding→relaxed-seated and LF was identified (r2= 0.15). Fifty-four patients (24%) had ΔSSstanding→relaxed-seated ≤10° and 16 patients (7%) had a stiff spine. Of the 54 patients with ΔSSstanding→relaxed-seated ≤10°, 9 had a stiff spine. The positive predictive value of ΔSSstanding→relaxed-seated ≤10° for identifying a stiff spine was 17%. ΔSSstanding→relaxed-seated ≤10° was not correlated with a stiff spine in this cohort. Utilising this simplified approach could lead to a six-fold overprediction of patients with a stiff lumbar spine. This, in turn, could lead to an overprediction of patients with abnormal spinopelvic mobility, unnecessary use of dual mobility bearings and incorrect targets for component alignment. Referring to patients ΔSSstanding→relaxed-seated ≤10° as being stiff can be misleading; we thus recommend use of the flexed-seated position to effectively assess pre-operative spinopelvic mobility

The presence of hip osteoarthritis is associated with abnormal spinopelvic characteristics. This study aims to determine whether the pre-operative, pathological spinopelvic characteristics “normalize” at 1-year post-THA. This is a prospective, longitudinal, case-control matched cohort study. Forty-seven patients underwent pre- and post- (at one-year) THA assessments. This group was matched (age, sex, BMI) with 47 controls/volunteers with well-functioning hips. All participants underwent clinical and radiographic assessments including lateral radiographs in standing, upright-seated and deep-flexed-seated positions. Spinopelvic characteristics included change in lumbar lordosis (ΔLL), pelvic tilt (ΔPT) and hip flexion (pelvic-femoral angle, ΔPFA) when moving from the standing to each of the seated positions. Spinopelvic hypermobility was defined as ΔPT>30° between standing and upright-seated positions. Pre-THA, patients illustrated less hip flexion (ΔPFA −54.8°±17.1° vs. −68.5°± 9.5°, p<0.001), greater pelvic tilt (ΔPT 22.0°±13.5° vs. 12.7°±8.1°, p<0.001) and greater lumbar movements (ΔLL −22.7°±15.5° vs. −15.4°±10.9°, p=0.015) transitioning from standing to upright-seated. Post-THA, these differences were no longer present (ΔPFApost −65.8°±12.5°, p=0.256; ΔPTpost 14.3°±9.5°, p=0.429; ΔLLpost −15.3°±10.6°, p=0.966). The higher prevalence of pre-operative spinopelvic hypermobility in patients compared to controls (21.3% vs. 0.0%; p=0.009), was not longer present post-THA (6.4% vs. 0.0%; p=0.194). Similar results were found moving from standing to deep-seated position post-THA. Pre-operative, spinopelvic characteristics that contribute to abnormal mechanics can normalize post-THA following improvement in hip flexion. This leads to patients having the expected hip-, pelvic- and spinal flexion as per demographically-matched controls, thus potentially eliminating abnormal mechanics that contribute to the development/exacerbation of hip-spine syndrome

The purpose of this study is to evaluate risk factors for distal construct failure (DCF) in posterior spinal instrumented fusion (PSIF) in adolescent idiopathic scoliosis (AIS). We observed an increased rate of DCF when the pedicle screw in the lowest instrumented vertebra (LIV) was not parallel to the superior endplate of the LIV, however this has not been well studied in the literature. We hypothesise a more inferiorly angled LIV screw predisposes to failure and aim to find the critical angle that predisposes to failure. A retrospective cohort study was performed on all patients who underwent PSIF for AIS at the Starship Hospital spine unit from 2010 to 2020. On a lateral radiograph, the angle between the superior endplate of the LIV was measured against its pedicle screw trajectory. Data on demographics, Cobb angle, Lenke classification, instrumentation density, rod protrusion from the most inferior screw, implants and reasons for revision were collected. Of 256 patients, 10.9% (28) required at least one revision. The rate of DCF was 4.6% of all cases (12 of 260) and 25.7% of revisions were due to DCF. The mean trajectory angle of DCF patients compared to all others was 13.3° (95%CI 9.2° to 17.4°) vs 7.6° (7° to 8.2°), p=0.0002. The critical angle established is 11°, p=0.0076. Lenke 5 and C curves, lower preoperative Cobb angle, titanium only rod constructs and one surgeon had higher failure rates than their counterparts. 9.6% of rods protruding less than 3mm from its distal screw disengaged. We conclude excessive inferior trajectory of the LIV screw increases the rate of DCF and a screw trajectory greater than 11° predisposes to failure. This is one factor that can be controlled by the surgeon intraoperatively and by avoiding malposition of the LIV screw, a quarter of revisions can potentially be eliminated

The spinopelvic alignment is often assessed via the Pelvic Incidence-Lumbar Lordosis (PI-LL) mismatch. Here we describe and validate a simplified method to evaluating the spinopelvic alignment through the L1-Pelvis angle (L1P). This method is set to reduce the operator error and make the on-film measurement more practicable. 126 standing lateral radiographs of patients presenting for Total Hip Arthroplasty were examined. Three operators were recruited to label 6 landmarks. One operator repeated the landmark selection for intra-operator analysis. We compare PI-LL mismatch obtained via the conventional method, and our simplified method where we estimate this mismatch using PI-LL = L1P - 90°. We also assess the method's reliability and repeatability. We found no significant difference (p > 0.05) between the PI-LL mismatch from the conventional method (mean 0.22° ± 13.6) compared to L1P method (mean 0.0° ± 13.1). The overall average normalised root mean square error (NRMSE) for PI-LL mismatch across all operators is 7.53% (mean -3.3° ± 6.0) and 6.5% (mean -2.9° ± 4.9) for the conventional and L1P method, respectively. In relation to intra-operator repeatability, the correlation coefficients are 0.87 for PI, 0.94 for LL, and 0.96 for L1P. NRMSE between the two measurement sets are PI: 9.96%, LL: 5.97%, and L1P: 4.41%. A similar trend is observed in the absolute error between the two sets of measurements. Results indicate an equivalence in PI-LL measurement between the methods. Reproducibility of the measurements and reliability between operators were improved. Using the L1P angle, the classification of the sagittal spinal deformity found in the literature translates to: normal L1P<100°, mild 100°<L1P<110°, and severe L1P>110°. Surgeons adopting our method should expect a small improvement in reliability and repeatability of their measurements, and a significant improvement of the assessment of the mismatch through the visualisation of the angle L1P

Evaluation of patient specific spinopelvic mobility requires the detection of bony landmarks in lateral functional radiographs. Current manual landmarking methods are inefficient, and subjective. This study proposes a deep learning model to automate landmark detection and derivation of spinopelvic measurements (SPM). A deep learning model was developed using an international multicenter imaging database of 26,109 landmarked preoperative, and postoperative, lateral functional radiographs (HREC: Bellberry: 2020-08-764-A-2). Three functional positions were analysed: 1) standing, 2) contralateral step-up and 3) flexed seated. Landmarks were manually captured and independently verified by qualified engineers during pre-operative planning with additional assistance of 3D computed tomography derived landmarks. Pelvic tilt (PT), sacral slope (SS), and lumbar lordotic angle (LLA) were derived from the predicted landmark coordinates. Interobserver variability was explored in a pilot study, consisting of 9 qualified engineers, annotating three functional images, while blinded to additional 3D information. The dataset was subdivided into 70:20:10 for training, validation, and testing. The model produced a mean absolute error (MAE), for PT, SS, and LLA of 1.7°±3.1°, 3.4°±3.8°, 4.9°±4.5°, respectively. PT MAE values were dependent on functional position: standing 1.2°±1.3°, step 1.7°±4.0°, and seated 2.4°±3.3°, p< 0.001. The mean model prediction time was 0.7 seconds per image. The interobserver 95% confidence interval (CI) for engineer measured PT, SS and LLA (1.9°, 1.9°, 3.1°, respectively) was comparable to the MAE values generated by the model. The model MAE reported comparable performance to the gold standard when blinded to additional 3D information. LLA prediction produced the lowest SPM accuracy potentially due to error propagation from the SS and L1 landmarks. Reduced PT accuracy in step and seated functional positions may be attributed to an increased occlusion of the pubic-symphysis landmark. Our model shows excellent performance when compared against the current gold standard manual annotation process

Internal fixation is currently the standard of care for Garden I and II femoral neck fractures in the elderly. However, there may be a degree of posterior tilt on the preoperative lateral radiograph above which failure is likely, and primary arthroplasty would be preferred. The purpose of this study was to determine the association between posterior tilt and the risk of subsequent arthroplasty following internal fixation of Garden I and II femoral neck fractures in the elderly. This study represents a secondary analysis of data collected in the FAITH trial, an international multicenter randomized controlled trial comparing the sliding hip screw to cannulated screws in the management of femoral neck fractures in patients aged 50 years or older. For each patient who sustained a Garden I or II femoral neck fracture and had an adequate preoperative lateral radiograph, the amount of posterior tilt was categorized as < 2 0 degrees or ≥20 degrees. Multivariable Cox proportional hazards analysis was used to assess the association between posterior tilt and subsequent arthroplasty during the two-year follow-up period, while controlling for potential confounders. Of the 555 patients in the study sample, posterior tilt was classified as ≥20 degrees for 67 (12.1%) and < 2 0 degrees for 488 (87.9%). Overall, 13.2% (73/555) of patients underwent subsequent arthroplasty in the 24-month follow-up period. In the multivariable analysis, patients with posterior tilt ≥20 degrees had a significantly increased risk of subsequent arthroplasty compared to those with posterior tilt < 2 0 degrees (22.4% (15/67) vs 11.9% (58/488), Hazard Ratio (HR) 2.22, 95% confidence interval (CI) 1.24–4, p=0.008). The other factor associated with subsequent arthroplasty was age ≥80 (p=0.03). In this study of patients with Garden I and II femoral neck fractures, posterior tilt ≥20 degrees was associated with a significantly increased risk of subsequent arthroplasty. Primary arthroplasty should be considered for Garden I and II femoral neck fractures with posterior tilt ≥20 degrees, especially among older patients

Recent analyses of failure mechanisms continue to show aseptic loosening as the predominant mechanism of total knee arthroplasty (TKA) failure. Evaluation for aseptic loosening begins with careful assessment of plain films radiographs, however the utility of examining lucent lines under a cemented tibial tray remains unclear. The purpose of this study is to examine the distribution of lucent lines under cemented tibial components on single-series anteroposterior (AP) and lateral plain radiographs and to determine their significance in the prediction of aseptic loosening found during revision TKA surgery. Retrospective chart and radiographic review of all patients that underwent revision TKA between 2001–2014 at a single academic hospital center. Revision TKA for periprosthetic fracture, stem fracture, implant dissociation and periprosthetic joint infection were excluded. The most recent pre-revision surgery AP and lateral knee radiographs were assessed by two fellowship trained adult reconstruction surgeons blinded to patient demographics and intraoperative details. Lucent lines under the tibia tray defined as >2mm were documented according to the new KSS radiographic scoring system. Demographic details and the surgeon's assessment whether the tibia tray was loose intraoperatively were extracted from chart review and the operative note, respectively. Univariate and multivariable logistic regression modeling was used to predict the outcome of aseptic loosening. Between 2001 and 2014, 312 revision TKAs were performed that met our inclusion criteria. Of these, 84 (26.9%) had intraoperative loose tibia trays. We observed a significantly increased risk of aseptic tibia loosening among older patients at time of surgery (odds ratio [OR] 1.05, 95% CI 1.02, 1.08). Posterior stabilised primary TKA components conferred a significantly decreased risk of aseptic tibia loosening (OR 0.36, 95% 0.21, 0.60). On an AP radiograph, after adjustment for other zones, the presence of a lucent line in zone 1, 2 or 3 were all significantly associated with tibia loosening, OR 7.35, 8.69 and 22.26 (p<0.0001) respectively. On a lateral radiograph, after adjustment for other zones, the presence of a lucent line in zone 1, 2 or 3 were all significantly associated with tibia loosening, OR 12.89, 18.03, and 11.63 (p<0.004) respectively. The complete absence of lucent lines under a tibia tray on an AP or lateral radiograph were associated with 96% (CI 0.02, 0.07) and 95% (CI 0.02, 0.09) reduced odds of aseptic tibia loosening. Careful examination of lucent lines under a tibia component can be highly predictive of aseptic loosening. The areas associated with highest risk of tibia loosening occur in zone 3 on the AP radiograph (medial or lateral to the keel) and zone 2 on the lateral radiograph (posteriorly). The risk of loosening in the absence of lucent line findings on plain films is significantly low

The functional pelvic tilt when standing and sitting forward of 7402 cases on the OPS, Optimized Ortho, Australia Data Base were reviewed. All patients had undergone lateral radiographs when standing simulating extension of the hip, and sitting forward when the hip is near full flexion. Pelvic tilt was measured as the angle of the Anterior Pelvic Plane to the vertical Sagittal Plane, rotation anteriorly being given a positive value. Pelvises that had rotated more than 13 degrees anteriorly (+ve) when sitting forward or posteriorly (-ve) when standing were considered to place the hip at increased risk of dislocation or edge loading when flexed or extending respectively. This degree of rotation has the effect of changing the acetabular version by approximately10. 0. Most safe zones that have been described have given a range of anteversion of 20. 0. as safe. A change of 10. 0. would potentially place the acetabular orientation outside this range. Further, clinical studies have supported this concept. All lateral radiographs were reviewed to confirm that 281 had undergone instrumented spinal fusion at some level between T12 and S1. There was a large variability in the number and the levels arthrodesed. The range of pelvic mobility in the non-arthrodesed group in extension was −37. 0. to 31. 0. (mean −0.9. 0. , Standard deviation 7.49) and in flexed position was −70. 0. to 49. 0. (mean −1.9. 0. , Standard deviation 14.01). For the group with any fusion the range of pelvic tilt in extension was −31. 0. to 22. 0. (mean −4. 0. , Standard deviation 8.21) and flexed −32. 0. to 46. 0. (mean 4.4. 0. , Standard deviation 13.79). Of the 7121 cases without instrumented fusion, 15.5% were considered to be at risk when in flexion and 6.1% when extended. The risk for those with any fusion was approximately doubled in both flexion and extension. Further, those with extensive arthrodesis from T12 to S1 had a range of pelvic tilts similar to the non-fused group, although they had a significantly higher percentage of cases in the ‘at risk’ zones. The proportion of the cases in the ‘at risk’ zones decreased progressively as the arthrodesed levels moved from L5/S1 to the upper lumbar spine, and with decreasing number of levels fused. Conclusion. Spinal fusion is not just one group as there are many combinations of different levels fused. Patients with instrumented spinal fusions do have a proportionately high risk of failure of their THR than the majority of cases with no instrumentation, though the risk varies significantly with the number of levels and actual levels arthrodesed. Further approximately 21% of cases with no spinal fusion have functional pelvic movements that would potentially place them ‘at risk’ of edge loading or dislocation. For any figures or tables, please contact authors directly

Introduction. The effect of the implant posterior condylar offset has recently generated much enthusiasm among researchers. Some reports were concerned about the relationship between the posterior condylar offset and an extension gap. However, the posterior condylar offset was measured in a flexed knee position or in reference to femoral anatomy alone. Posterior femoral condylar offset relative to the posterior wall of the tibia (posterior offset ratio; POR) is possibly the risk of knee flexion contracture associated with posterior femoral condylar offset after TKA. However, there are no reports concerning the relationship between POR and flexion contracture in vivo. The aim of this study is to evaluate the relationship between the measurement of POR and flexion contracture of the knee in vivo. Methods. Twenty-seven patients who underwent a primary total knee arthroplasty (PFC Sigma RP-F) were participated in the study. The lateral femoro-tibial angle (lateral FTA) was measured using lateral radiographs obtained by two procedures. Two procedures are applied to obtain true lateral radiographs of the lower extremities. (1) Full-length true lateral radiographs on standing, (2) True lateral radiographs in the prone position (Fig. 1A). ‘Posterior offset ratio’ was defined as Fig. 1B. Significant differences among groups were assessed using two-tailed Student's t-tests. Spearman's correlation analysis was performed to evaluate the relationship between lateral FTA and posterior offset ratio of patients. Results. The mean value of the POR on standing was 14.94 ± 7.53%. The mean value of flexion contracture of the knee on standing was 11.67 ± 9.21 degree and that in the prone position was 4.22 ± 6.17 degree (P = 0.001). The POR was negatively correlated with flexion contracture of the knee in all procedures with statistical significance (standing: r = 0.62, P = 0.0039; prone: r = 0.66, P = 0.0001) (Fig. 2). Discussion. We have evaluated flexion contracture by two procedures. The mean value of flexion contracture of the knee on standing was 11.67 ± 9.21 degree, whereas that in the prone position was 4.22 ± 6.17 degree. We surmised that this discrepancy occurred due to the flexor muscle tension on standing. In terms of the evaluation of posterior soft tissue tightness of the knee, muscle relaxation can be achieved in prone position is rather than standing position. Our study investigated the relationship between the posterior protrusions of the posterior condyle of the femur relative to the tibia (POR) and flexion contracture after TKA evaluated by two measurement procedures. POR is strongly correlated with flexion contracture evaluated by both measurement procedures. The value of POR of this implant in vitro was about 25% in previous study, whereas the mean value of POR in vivo was 14.94%, suggesting that POR in the flexion contracture knee relatively reduced because posterior soft tissue pushed femoral component anteriorly. Our result clearly showed that if posterior clearance is insufficient, flexion contracture occur due to posterior soft tissue tightness. In conclusion, POR after TKA in vivo negatively correlate with flexion contracture presumably because posterior soft tissue pushed femoral component anteriorly

The best algorithm, measurements, and criteria for screening children with Down syndrome for upper cervical instability are controversial. Many authors have recommended obtaining flexion and extension views. We noted that patients who require surgical stabilization due to myelopathy or cord compression typically have grossly abnormal radiographic measurements on the neutral upright lateral cervical spine radiograph (NUL). This study was designed to determine whether a full series of cervical spine images including flexion/extension lateral radiographs (FEL) was important to avoid missing upper cervical instability. This is a retrospective evaluation of cervical spine images obtained between 2006 and 2012 for the purposes of “screening” children with Down syndrome for evidence of instability. The atlanto-dental interval, space available for cord, and basion axial interval were measured on all films. The Weisel-Rothman measurement was made in the FEL series. Clinical outcome of those with abnormal measurements were reviewed. Sensitivity, specificity, positive and negative predictive values of NUL and FEL x-rays for identifying clinically significant cervical spine instability were calculated. Two-hundred and forty cervical spine series in 213 patients with Down syndrome between the ages of four months and 25 years were reviewed. One hundred and seventy-two children had a NUL view, and 88 of these patients also had FEL views. Only one of 88 patients was found to have an abnormal ADI (≥6mm), SAC (≤14mm), or BAI (>12mm) on an FEL series that did not have an abnormal measurement on the NUL. This patient had no evidence of cord compression or myelopathy. Obtaining a single NUL x-ray is an efficient method for radiographic screening of cervical spine instability. Further evaluation may be required if abnormal measurements are identified on the NUL x-ray. We also propose new “normal” values for the common radiographic measurements used in assessing risk of cervical spine instability in patients with Down syndrome

Introduction:. The lateral radiographs are useful in evaluation of the acetabular cup anteversion. However, this method was affected by variations in pelvic position and radiographic technique. In this study, we employed the ischial axis (IA) as an anatomical landmark on the lateral radiographs, and we investigated a relationship between IA and the anterior pelvic plane (APP) using three-dimensional computed tomography (3D-CT). Using these findings, we report a new method for accurate measurement of the acetabular cup anteversion on plain lateral radiographs using IA as an anatomical reference. Materials and Methods:. At first, preoperative3D-CT images were obtained in 109 patients who underwent total hip arthroplasty. The diagnosis was osteoarthritis in all patients. The angle between the IA (defined by a line connecting the anterior edge of the greater sciatic notch and the lesser sciatic notch) and APP (defined by the bilateral anterosuperior iliac spine and the symphysis) was measured on 3D-CT (Fig. 1). Secondly, postoperative lateral radiographs were obtained at 2 weeks, 4 weeks, 12 weeks, 24 weeks, and 52 weeks after surgery in 15 patients. The angle between a line tangential to the opening of the cup and a line perpendicular to APP was measured (Fig. 2). Three methods of acetebular cup position assessment were compared: 1) the present method, 2) Woo and Morrey method, and 3) software (2D template, Kyocera) method. Results:. The mean angle between IA and APP was 18.0 ± 3.5°. The mean acetabular cup anteversion measured using present method was 21.3°, Woo and Morrey method was 26.6°, and software method was 21.2°. The mean SDs of present method was 0.64°, Woo and Morrey method was 1.17°, and software method was 0.46°. Conclusions:. APP, considered as vertical in weight bearing, has a relatively consistent relationship between IA. The findings of this study provide a more consistent measurement of acetabular cup by reducing variation due to pelvic position

Background. The adult acquired flat foot is caused by a complete or partial tear of the tibialis posterior tendon. We present the results of flexor digitorum longus transfer and medializing calcaneal osteotomy for recontruction of the deformity. Material & Methods. Twenty-six patients (31 feet) with an average age of 58 years (36–75) were operated for an acquired flat foot deformity. The patients were seen before surgery, one year after surgery and an average of 85 months after surgery to assess the following parameters: AOFAS Score, VAS Score for pain (0–10). Foot x-rays in full weightbearing position (dorsoplantar and lateral) were done at every visit in order to assess the following parameters: tarsometatarsale angle on the dorsoplantar and lateral x-ray, talocalcaneal angle on the lateral x-ray, calcaneal pitch angle and medial cuneiforme height on the lateral x-ray. Results. The AOFAS hindfoot score improved from 46.4 to 89.5 (max.: 100) points 1 year postoperatively und decreased to 87.8 points at the last follow-up. VAS for pain decreased from 6.6 to 1.1 at the one year follow-up and increased to 1.5 at the last follow-up. All radiologic parameters improved and stayed without significant changes over time. Following complications were seen: one recurrence, two patients with irritation of the sural nerve, one patient with hypesthesia of the big toe. In six patients the screws had to be removed. Apart from that no other revision surgery had to be done. Conclusion. Flexor digitorum longus transfer together with medializing calcaneal osteotomy provides excellent results for the therapy of acquired flat foot deformity. The results did not change significantly over time

Spinopelvic mobility describes the change in lumbar lordosis and pelvic tilt from standing to sitting position. For 1° of posterior pelvic tilt, functional cup anteversion increases by 0.75° after total hip arthroplasty (THA). Thus, spinopelvic mobility is of high clinical relevance regarding the risk of implant impingement and dislocation. Our study aimed to 1) determine the proportion of OA-patients with stiff, normal or hypermobile spino-pelvic mobility and 2) to identify clinical or static standing radiographic parameters predicting spinopelvic mobility. This prospective diagnostic cohort study followed 122 consecutive patients with end-stage osteoarthritis awaiting THA. Preoperatively, the Oxford Hip Score, Oswestry Disability Index and Schober's test were assessed in a standardized clinical examination. Lateral view radiographs were taken of the lumbar spine, pelvis and proximal femur using EOS© in standing position and with femurs parallel to the floor in order to achieve a 90°-seated position. Radiographic measurements were performed for the lumbar lordosis angle (LL), sacral slope (SS), pelvic tilt (PT), pelvic incidence (PI) and pelvic-femoral-angle (PFA). The difference in PT between standing and seated allowed for patient classification based on spino-pelvic mobility into stiff (±30°). From the standing to the sitting position, the pelvis tilted backwards by a mean of 19.6° (SD 11.6) and the hip was flexed by a mean of 57° (SD 17). Change in pelvic tilt correlated inversely with change in hip flexion. Spinopelvic mobility is highly variable in patients awaiting THA and we could not identify any clinical or static standing radiographic parameter predicting the change in pelvic tilt from standing to sitting position. In order to identify patients with stiff or hypermobile spinopelvic mobility, we recommend performing lateral view radiographs of the lumbar spine, pelvis and proximal femur in all patients awaiting THA. Thereafter, implants and combined cup inclination/anteversion can be individually chosen to minimize the risk of dislocation. No predictors could be identified. We recommend performing sitting and standing lateral view radiographs of the lumbar spine and pelvis to determine spinopelvic mobility in patients awaiting THA

Introduction. Interactions between hip, pelvis and spine, as abnormal spinopelvic movements, have been associated with inferior outcomes following total hip arthroplasty (THA). Changes in pelvis position lead to a mutual change in functional cup orientation, with both pelvic tilt and rotation having a significant effect on version. Hip osteoarthritis (OA) patients have shown reduced hip kinematics which may place increased demands on the pelvis and the spine. Sagittal and coronal planes assessments are commonly done as these can be adequately studied with anteroposterior and lateral radiographs. However, abnormal pelvis rotation is likely to compromise the outcome as they have a detrimental effect on cup orientation and increased impingement risk. This study aims to determine the association between dynamic motion and radiographic sagittal assessments; and examine the association between axial and sagittal spinal and pelvic kinematics between hip OA patients and healthy controls (CTRL). Methods. This is a prospective study, IRB approved. Twenty hip OA pre-THA patients (11F/9M, 67±9 years) and six CTRL (3F/3M, 46±18 years) underwent lateral spinopelvic radiographs in standing and seated bend-and-reach (SBR) positions. Pelvic tilt (PT), pelvic-femoral-angle (PFA) and lumbar lordosis (LL) angles were measured in both positions and the differences (Δ) between standing and SBR were calculated. Dynamic SBR and seated maximal-trunk-rotation (STR) were recorded in the biomechanics laboratory using a 10-infrared camera and processed on a motion capture system (Vicon, UK). Direct kinematics extracted maximal pelvic tilt (PT. max. ), hip flexion (HF. max. ) and (mid-thoracic to lumbar) spinal flexion (SF. max. ). The SBR pelvic movement contribution (ΔPT. rel. ) was calculated as ΔPT/(ΔPT+ΔPFA)∗100 for the radiographic analysis and as PT. max. /(PT. max. +HF. max. ) for the motion analyses. Axial and sagittal, pelvic and spinal range of motion (ROM) were calculated for STR and SBR, respectively. Spearman's rank-order determined correlations between the spinopelvic radiographs and sagittal kinematics, and the sagittal/axial kinematics. Mann-Whitney U-tests compared measures between groups. Results. Radiograph readings correlated with sagittal kinematics during SBR for ΔPT and PT. max. (ρ=0.64, p<0.001), ΔPFA and HF. max. (ρ=0.44, p<0.0002), and ΔLL and SF. max. (ρ=0.34, p=0.002). Relative pelvic movements (ΔPT. rel. ) were not different between radiographic (11%±21) and biomechanical (15%±29) readings (p=0.9). Sagittal SRB spinal flexion correlated with the axial STR rotation (ρ=0.43, p<0.0001). Although not seen in CTRL, sagittal SRB pelvic flexion strongly correlated with STR pelvic rotation in OA patients (ρ=0.40, p=0.002). All spinopelvic parameters were different between the patients with OA and CTRL. CTRLs exhibited significantly greater mobility and less variability in all 3 segments (spine, pelvis, hip) and both planes (axial and sagittal) (Table 1). Conclusion. Correlation between sagittal kinematics and radiographical measurements during SBR validates the spinopelvic mobility assessments in the biomechanics laboratory. Axial kinematics of both pelvis and spine correlated significantly in OA patients, suggesting that patients with abnormal sagittal mobility are likely to also exhibit abnormal axial mobility, which can further potentiate any at-risk kinematics. Significantly lower OA ROM must be investigated post-THA. Pre-THA variability of both sagittal and axial movements indicates that both planes must be considered ahead of surgical planning with navigation and/or robotics. For any figures or tables, please contact the authors directly

Dorr bone type is both a qualitative and quantitative classification. Qualitatively on x-rays the cortical thickness determines the ABC type. The cortical thickness is best judged on a lateral x-ray and the focus is on the posterior cortex. In Type A bone it is a thick convex structure (posterior fin of bone) that can force the tip of the tapered implant anteriorly – which then displaces the femoral head posteriorly into relative retroversion. Fractures in DAA hips have had increased fractures in Type A bone because of the metaphyseal-diaphyseal mismatch (metaphysis is bigger than diaphysis in relation to stem size). Quantitatively, Type B bone has osteoclastic erosion of the posterior fin which proceeds from proximal to distal and is characterised by flattening of the fin, and erosive cysts in it from osteoclasts. A tapered stem works well in this bone type, and the bone cells respond positively. Type C bone has loss of the entire posterior fin (stove pipe bone), and the osteoblast function at a low level with dominance of osteoclasts. Type C is also progressive and is worse when both the lateral and AP views show a stove pipe shape. If just the lateral x-ray has thin cortices, and the AP has a tapered thickness of the cortex a non-cemented stem will work, but there is a higher risk for fracture because of weak bone. At surgery Type C bone has “mushy” cancellous bone compared to the hard structure of type A. Tapered stems have high risk for loosening because the diaphysis is bigger than the metaphysis (opposite of Type A). Fully coated rod type stems fix well, but have a high incidence of stress shielding. Cemented fixation is done by surgeons for Type C bone to avoid fracture, and insure a comfortable hip. The large size stem often required to fit Type C bone causes an adverse-stem-bone ratio which can cause chronic thigh pain. I cement patients over age 70 with Type C bone which is most common in women over that age

Total Elbow Replacements are indicated for pain and disability in patients with rheumatoid and osteoarthritis of the elbow. The quality of the cementation has been specifically studied and shown to be directly related to the clinical outcome and implant survival. Aim. The aim of our study is to radiologically assess and grade the cementation around the components following total elbow replacement (GSB 3 or Coonrad Morrey) in two groups of patients. Materials and methods. Group I underwent total elbow replacement using Heraeus cement gun with medium palacos viscosity cement and group 2 using Zimmer cement gun with simplex medium viscosity cement. Average age in Group 1 was 72.3 (range 67–88 yrs) and group 2 was 69 years (range 52–87 yrs). 3 Coonrad Morrey and 13 GSB 3 total elbow replacement were used in Group 1 and 2 Coonrad Morrey and 14 GSB 3 in group 2. The primary indication for surgery was osteoarthritis, rheumatoid arthritis, post traumatic arthritis and seronegative arthritis in both groups. The cementation was assessed radiologically using three grading system (Morrey, Gerber & Bristol). Results. In Group I (Heraeus) 14 had adequete cementation in both AP and lateral radiographs, 1 humeral and 1 ulna components on AP radiograph revealed marginal cementing. In Group 2 (Zimmer) 11 had adequete cementation in both AP and lateral radiographs, 1 humeral and 1 ulna on AP and 1 humerus and 3 ulna on lateral radiograph were 4 marginal. Conclusion. Precise application of cement during total elbow arthroplasty is an important factor in achieving good implant fixation. To achieve this, a proper ergonomic design of the cement gun is mandatory. From our study we conclude that there was a difference in quality of cementation between the two groups