Objective: To review our results with hip joint reconstruction in severe spastic hip disease. Design: Descriptive case series. Setting: A tertiary referral medical center. Subjects: All the patients who underwent a hip reconstruction procedure because of SHD were retrospectively evaluated. Twenty-five patients with 32 involved femoral necks were treated between 1997 and 2003. All of the patients had a migration index greater than 40% with 8 of them having a migration index of over 65%. 15 patients had total involvement type CP and 10 patients had diplegic type CP. Intervention: Hip joint reconstruction comprised of varus derotation osteotomy and a periacetabular osteotomy such as the Dega osteotomy, and when necessary an open reposition of the hip joint was performed. Results: Good coverage of the femoral head was achieved in 23 of the patients and in 30 of the femoral heads. There was no difference between the high migration index group and the low migration index group. In two cases progressive posterior dislocation continued following the operation, attributed to incomplete correction of the posterior acetabulum. One patient had an intra-operative fracture of the femoral neck. The results were similar in the more severe and less severe groups. Conclusions: Hip reconstruction has favorable results in all types of CP. We found no difference between the group with high migration index and the low migration index concerning complications and outcome. A high migration index should not be considered as reason not to reconstruct the hip joint. The only contraindication for this procedure is osteoarthritic changes of the hip joint

Background. Long term success of any shoulder joint reconstruction procedure involving subscapularis attachment take down is dictated by the way one chooses to release and repair/reconstruct the subscapularis insertion. There are several methods that were reported in the literature without any preset guidelines which are easily reproducible. Methods. 5 specimens of fresh cadaver shoulder joints dissected and the subscapularis footprint insertion involving the tendon and muscle exposed. We intend to preserve subscapularis tendon footprint along with the lesser tuberosity by performing the footprint osteotomy fashioned step wise in the following manner. Results. It has two vertical components (sagittal and coronal plane osteotomies) and one horizontal component (distal osteotomy at musculo tendinous junction level). Figure 1: demonstrating the three step cuts in the dry bone of proximal humerus with three different ostetomes to mark the plain of osteotomies in the lesser tuberosity. Step-1: Medial wall ridge of the inter-tubercular sulcus serves as landmark for sagittal component. The depth of sagittal component is just 5 – 10mm and its length extending from articular margin proximally and distally up to musculo tendinous junction, measuring approximately 15–20mm. Step-2: Coronal plane osteotomy is in line with and parallel to undersurface of subscapularis tendon adjacent to the articular margin and connecting sagittal component and measured 10–15mm approximately. Figure 2: demonstrating the two cuts / osteotomies to mark the sagittal and coronal components of the subscapularis foot print osteotomy in the lesser tuberosity of a fresh cadaver. Step-3: The horizontal component (distal osteotomy at musculo tendinous junction level is 5–10 mm in width, connects the two vertical components, thus completing the footprint osteotomy. Discussion. Subscapularis reattachment plays a pivotal role in the shoulder joint reconstruction procedures especially total joint arthroplasty. Subscapularis take down either by tenotomy or by periosteal elevation from lesser tuberosity followed by repair carries a risk of retraction and poor healing and early failure. Footprint osteotomy as a thin sliver of cortical bone instead of these above described three steps with the attached tendon carries a risk of fragmentation of the bone sliver along with lack of rotation control on the repair. The necessity for doing such a three step osteotomy procedure which results in a wedge shaped bone tendon foot print construct, we believe is of paramount importance for a successful reconstruction. Figure 3: demonstrating the marking sutures passed into the bone tendon construct comprising of lesser tuberosity and subscapularis for effective foot print reconstruction in a fresh cadaver. Conclusions. This three step footprint osteotomy of the Subscapularis tendon offers a stable construct which is easy to reproduce with better healing potential. For figures, please contact authors directly

Introduction & Aim: The usual clinical presentation in Fibular hemimelia involves equinovalgus deformity of the foot and ankle instability with absence of the lateral rays of the foot. The aim of this study is to evaluate the results of ankle joint reconstruction, using remnants of the fibula, fibular analge or contra lateral fibular graft, in conjunction with the Ilizarov Technique. Methods: We reviewed 13 limb segments in 12 patients with fibular hemimelia, with an average age of 4.7 years. According to Catagni’s classification 2 limbs were type I, 1 limb was type II and 10 limbs were type III. The ankle joint was reconstructed using remnants of the fibula if present in type I, fibular analge or a contra lateral fibular graft. The Ilizarov technique was then used to correct limb length discrepancy and any concomitant deformities. Results: The results were assessed by the satisfaction of patients and families, the functional outcome in terms of daily activities and clinical examination of the patients. A satisfactory stability of the ankle foot complex was achieved in all patients. The average lengthening achieved using the frame was 5.6 cm and all limbs were equalized to within 2 cm. Conclusion: Reconstruction of the ankle joint bring the foot in good position, preserves the ankle joint motion, facilitate fitting shoes and stabilize the joint in a more normal way compared to distal tibial osteotomies. The ilizarov technique corrects the concomitant deformity and achieves an equal limb length. The combination of both techniques provides a better outcome compared to other treatment modalities

Introduction: The usual clinical presentation of fibular hemimelia is of leg discrepancy, an equinovalgus deformity of the foot, ankle instability and the absence of the lateral rays of the foot. The aim of this study is to evaluate the results of ankle joint reconstruction, using remnants of the fibula, fibular analge or contra lateral fibular graft, in conjunction with the Ilizarov Technique. Methods: Thirteen limb segments in 12 patients with fibular hemimelia were reviewed, with an average age of 4.7 years. According to Catagni’s classification 2 limbs were type I, 1 limb was type II and 10 limbs were type III. The ankle joint was reconstructed using remnants of the fibula if present in type I, fibular analge or a contra lateral fibular graft. The Ilizarov technique was the used to correct limb length discrepancy and any concomitant deformities. Results: The functional outcome was assessed by the ability to undertake daily activities. All cases were clinically examined and the satisfaction of the patients and family were assessed. A satisfactory stability of the ankle foot complex was achieved in all patients. The average lengthening achieved using the frame was 5.6 cm and all limbs were equalized to within 2 cm of the contralateral side. Discussion: Reconstruction of the ankle joint brings the foot into a good position, preserves the ankle joint motion, facilitates fitting shoes and stabilizes the joint in a more normal position compared to distal tibial osteotomies. The Ilizarov technique corrects the concomitant deformity and achieves a near normal limb length. The combination of both techniques provides a better outcome compared to other treatment modalities

Introduction. Accurate alignment of components in total knee arthroplasty (TKA) is a known factor that contributes to improvement of post-operative kinematics and survivorship of the prosthetic joint. Recently, CAOS has been introduced into TKA in effort to reduce positioning variability that may deviate from the mechanical axis. However, literature suggests that clinical outcomes following TKA with CAOS may not present a significant improvement from traditional methods of implantation. This would infer that achieving correct alignment, alone, might be insufficient for ensuring an optimal reconstruction of the joint. Therefore, this study seeks to evaluate the importance of soft-tissue balancing, through the quantification of joint kinetics collected with intraoperative sensors, with or without the combined use of CAOS. Methods. Seven centers have contributed 215 patients who have undergone primary TKA with the use of intraoperative sensors. Of the 7 surgeons contributing patients to this study, 3 utilize CAOS; 4 utilize manual techniques. Along with standard demographic and surgical data being collected as per the multicenter study protocol, soft-tissue release techniques and medial-lateral intercompartmental loads—as indicated by the intraoperative sensors—were also captured pre- and post-release. “Optimal” balance was defined as a medial-lateral load difference of ≤ 15 lbs. A chi-squared analysis was performed to determine if the percentage of soft-tissue release was significantly different between the two groups: patients with CAOS, and patients without CAOS. Results. Of the 215 patients (35% with CAOS, 65% without CAOS) who have received TKA, using intraoperative sensors to assess mediolateral balance, 92.6% underwent soft-tissue release. Stratifying this data by surgical technique: 89% of the patients with CAOS, and 94% of patients without CAOS, were released. A chi-squared analysis—with 3 degrees of freedom; and 99% confidence—was executed to determine if the 5% difference between the two groups was significant. The analysis showed that there was no significant difference between the two groups, thus we can conclude that soft-tissue release is as equally necessary in the CAOS TKA group, as it is in the traditional TKA group. Discussion. It is widely accepted that correct alignment of TKA components contributes to improved kinematic function of the affected joint. Recently, technology has been developed to digitally guide surgeons through bony cuts, thereby decreasing the incidence of deviation from the mechanical axis. However, alignment may not be the foremost contributing factor in ensuring an optimal joint state. In this evaluation, 92.6% of the cohort required some degree of releasing of ligamentous structures surrounding the knee joint, regardless of intraoperative technique used. A chi-squared analysis of the data supports the claim that soft-tissue release is used in nearly all cases, irrespective of the use of CAOS (p < 0.001). This suggests that soft-tissue release is necessary in nearly all cases, even after appropriate alignment has been digitally verified. The data strongly supports the idea that obtaining an optimally functioning joint is multifactorial, and that alignment may play a more minor role in achieving ideal joint reconstruction than previously assumed, being superseded by the necessity to achieve soft-tissue balance

The Adams-Berger reconstruction is an effective technique for treating distal radioulnar joint (DRUJ) instability. Graft preparation techniques vary amongst surgeons with insufficient evidence to support one technique over another. Our study evaluated the biomechanical properties of four graft preparation techniques.

Extensor tendons were harvested from fresh frozen porcine trotters obtained from a local butcher shop and prepared in one of three configurations (n=5 per group): tendon only; tendon prepared with non-locking, running suture (2-0 FiberLoop, Arthrex, Naples, FL) spaced at 6 mm intervals; and tendon prepared with suture spaced at 12 mm intervals. A fourth configuration of suture alone was also tested. Tendons were allocated in a manner to ensure comparable average diameters amongst groups. Biomechanical testing occurred using custom jigs simulating radial and ulnar tunnels attached to a Bose Electroforce 3510 mechanical testing machine (TA Instruments). After being woven through the jigs, all tendons were sutured end-to-end with 2-0 PROLENE suture (Ethicon). Tendons then underwent a staircase cyclic loading protocol (5-25 Newtons [N] at 1 hertz [Hz] for 1000 cycles, then 5-50 N at 1 Hz for 1000 cycles, then 5-75 N at 1 Hz for 1000 cycles) until graft failure; if samples did not fail during the protocol, they were then loaded to failure. Samples were visually inspected for mode of failure after the protocol. A one-way analysis of variance was used to compare average tendon diameter; post-hac Tuhey tests were used to compare elongation and elongation rate. Survival to cyclic loading was analyzed using Kaplan-Meier survival curves with log rank. Statistical significance was set at a = 0.05.

The average tendon diameter of each group was not statistically different [4.17 mm (tendon only), 4.33 mm (FiberLoop spaced 6 mm), and 4.30 mm (FiberLoop spaced 12 mm)]. The average survival of tendon augmented with FiberLoop was significantly higher than tendon only, and all groups had significantly improved survival compared to suture only. There was no difference in survival between FiberLoop spaced 6 mm and 12 mm. Elongation was significantly lower with suture compared to tendon augmented with FiberLoop spaced 6 mm. Elongation rate was significantly lower with suture compared to all groups. Modes of failure included rupture of the tendon, suture, or both at the simulated bone and suture and/or tendon interface, and elongation of the entire construct without rupture.

In this biomechanical study, augmentation of porcine tendons with FiberLoop suture spaced at either 6 or 12 mm for DRUJ reconstruction significantly increased survival to a staircase cyclic loading protocol, as suture material was significantly stiffer than any of the tendon graft configurations.

The April 2023 Research Roundup³⁶⁰ looks at: Ear protection for orthopaedic surgeons?; Has arthroscopic meniscectomy use changed in response to the evidence?; Time to positivity of cultures obtained for periprosthetic joint infection; Bisphosphonates for post-COVID-19 osteonecrosis of the femoral head; Missing missed fractures: is AI the answer?; Congenital insensitivity to pain and correction of the knee; YouTube and paediatric elbow injuries.

Cite this article: Bone Joint Res 2022;11(8):514–517.

Objectives

Because there have been no standard methods to determine pre-operatively the thickness of resection of the proximal tibia in unicompartmental knee arthroplasty (UKA), information about the relationship between the change of limb alignment and the joint line elevation would be useful for pre-operative planning. The purpose of this study was to clarify the correlation between the change of limb alignment and the change of joint line height at the medial compartment after UKA.

In patients with developmental dysplasia of the hip (DDH) chronic joint dislocation induces remodeling of the soft tissue with contractures, muscle atrophy, especially of the hip abductors muscles, leading to severe motor dysfunction, pain and disability (1). The aim pf the present work is to explore if a correct positioning of the prosthetic implants through 3D skeletal modeling surgical planning technologies and an adequate customized rehabilitation can be beneficial for patients with DDH in improving functional performance.

The project included two branches: a methodology branch of software development for the muscular efficiency calculation, which was inserted in the Hip-Op surgical planning system (2), developed at IOR to allow surgical planning for patients with complex hip joint impairment; and a clinical branch which involved the use of the developed software as part of a clinical multicentric randomized trial. 50 patients with DDH were randomized in two groups: a simple surgical planning group and an advanced surgical planning with muscular study group. The latter followed a customized rehabilitation program for the strenghtening of hip abductor muscles. All patients were assessed before surgery (T0) and at 3 (T1) and 6 months (T2) postoperatively using clinical outcome (WOMAC, HHS, ROM, MMT, SF12, 10mt WT) and instrumental measures (Dynamometric MT). Pre- and post-operative musculoskeletal parameters obtained by the software (i.e., leg length discrepancy, hip abductor muscle lengths and lever arms) using Hip-Op during the surgical planning were considered.

One Way ANOVA for ROM measurement showed a significant improvement at T2 in patients included in experimental group, as well as WOMAC, HHS and SF12 score. The Dynamometric MT score showed significant differences between at T2 (p<0.009).

Spearman's rank correlation coefficients showed a significant correlation between both pre- and post-operative abductors lever arm (mm) and hip abductor muscle strength at T2 (ρ = −0.55 pre-op and ρ = −0.51 post-op, p p<0.012 and p<0.02 respectively) and between the operated pre-postoperative leg length variation (mm) and the hip abductor muscle strength (ρ = −0.55, p p<0.013).

Results so far obtained showed an improvement of functional outcomes in patients undergoing hip replacement surgery who followed therapeutic diagnostic pathway sincluding a preoperative planning including the assessment of the abductiors lever arm and a dedicated rehabilitation program for the strenghtening of abductios. Particularly interesting is the inverse relationship between the strength of the hip abductor muscles and the variation of the postoperative abductor lever arm.

Introduction and Aims: Distal radioulnar joint surgery in the past have been dominated by different types of partial or complete ulnar head excision. However, in the long run this can create a number of problems; hence we have used Herbert modular prosthesis to tackle these very difficult situations. This prosthesis comprises of a press fit stem in three sizes and a ceramic head also available in three sizes.

Method: In Wrightington Hospital upper limb unit, 61 patients underwent Herbert ulnar head replacement. Fifty-eight were clinically and radiologically reviewed. This is the largest series from a single centre of this type of surgery.

Between December 1998 and December 2002, 21 male and 27 female patients were operated. The mean age was 49.8 (range 28–72 years). Twenty-two left, eighteen right and two bilateral replacements were performed. The mean follow-up was 20.02 months (range 3–60 months).

An independent observer, using range of motion, grip strength and satisfaction as outcome, reviewed all patients.

Results: Primary diagnoses included failed Darrach, Bower, Sauve Kapandji and traumatic ulnar head excision. Forty-five patients were satisfied with the outcome. Pain score showed a mean improvement of four, with a range of 0–10. The grip strength compared to normal side was decreased in 50% of the patients. The range of motion compared to normal side improved by a mean of 10 degrees (range 3–20) in supination and 13 (range 4–23) in pronation.

Conclusion: Radiological review showed new bone (eight) and notch formation (nine). Stress shielding of 0–19mm was observed in distal ulna with revision or emergency stem. Complication occurred in eight patients: instability (four), RSD (one), implant failure (one) and two others. Twelve patients required further surgery. No loosening was observed at revision. There are no long-term results available at present.

We prove the importance of the complete osteoligamentary elbow reconstruction and the usefulness of the liga-mentoplasty by palmaris longus combined with other procedures in complex elbow unstable injuries.

17 patients aged between 17 and 72 suffered elbow luxation or subluxation with rupture of the medial collateral ligament, associated with:

Fracture of the radius head,

In 3 compaound injuries we had open fractures with Brahial artery lesion, Ulnar nerve pulsy, radial nerve laceration, Brahial plexus injury.

The lesions happened between 2 hours and 2 yrs pre-operatively, caused to work accidents or to traffic accidents with a follow up between 8–62 months. 10 of the injuries were operated almost in emergency by ligamen-toplasty with palmaris longus, coronoidal process fixation with screw or ancor, radial head osteosynthesis or prosthesis. The vascular injuries urgently operated while the nerve lesions left for secondary repair. A functional splint was applied postoperatively, initially fixated between 110–85 degrees. The splint removed 2 months postoperatively, while full rang of motion obtained.

We performed both Mayo clinic, DAS scores and grasp strength force and Range of Motion measurement evaluation procedures

Satisfactory to excellent results have been obtained in 11 cases with stable joints and range of motion with 20 degrees extension-flexion deficit while in I case the instability persited, in another one arrived 50% of the normal range of motion.

The complex elbow injuries with ligamentary instability are effectively treated if except fractures we always repair The medial-anterior ligaments lesion with liga-mentoplasty and ancors.

Traumatic injuries to the sternoclavicular joint (SCJ) are uncommon representing only 3% of all injuries to the shoulder girdle. Acutely, the majority are managed non-operatively with physiotherapy rehabilitation. However, if there is evidence of neurovascular compromise emergency reduction is indicated. There is no consensus on treatment of SCJ dislocations and subluxations that remain symptomatic after conservative treatment. Multiple surgical techniques have been described to alleviate this problem. These include resection of the medial end of the clavicle and various stabilization techniques using Kirschner wires, muscle tendon (subclavius, sternocleidomastoid, semi-tendinosus and palmaris longus) and synthetic materials (Dacron). However, all techniques have reported problems in terms of pain, decreased range of movement and a relatively high complication rate.

We report a new technique using a LARS® ligament (Ligament Augmentation and Reconstruction System) with good early post-operative results. 5 symptomatic SCJ dislocations were repaired over a 3 year period. The operations were conducted by the same surgeon and at the same unit. The patients were on average 20 years old (17–22). Mean follow up time was 21 months (9–41). Functional assessment was made using the DASH (Disabilities of the Arm, Shoulder and Hand) and the OSS (Oxford Shoulder Score) outcome measures. An improvement between pre- and post-operative scoring was observed in both DASH median 51.7 (24.2–75.0) v 13.7 (8.3–20.8) (p=0.024) and OSS 20.6 (15–32) v 41.8 (39–47) (p<0.001). One patient had a pneumothorax intra-operatively but this resolved with conservative treatment. There were no long term complications experienced during follow up.

Purpose: To analyse preliminary outcomes of a new synthetic ligament used for reconstructing coraco-clavicular ligament in acromio-clavicular joint disruption.

Methods: Patients who underwent acromio-clavicular joint stabilisation using Nottingham Surgilig were followed up at average of 40 months (range 6–80 months) post operation. Apart from clinical and radiological assessment, the Constant-Murley scoring system and the Imatani scores were also used to measure outcome.

Results: Twenty patients underwent this operation and data was available on 19 of them. These patients had their operation after an average of 18 months following injury, during which period they had conservative treatment, except in 2 cases where a Weaver Dunn operation was performed initially.

The mean Constant score was 88 (s.d. 12). The mean Imatani score was 86 (s.d. 16). Most patients were satisfied with the operation (90%). There was one case of rupture through the central portion of the Surgilig, and following extensive laboratory analysis, the ligament has been modified since. One patient had a fracture of his coracoid while lifting heavy weights. In 4 patients there was clinical and radiological evidence of loosening of the screw but only 1 complained of this being a problem.

Conclusion: This is an initial medium term outcome analysis of the Nottingham Surgilig. Our results are promising and justify further use and evaluation of this relatively new technique.

In the treatment of acute elbow dislocation promising clinical results have been reported on articulated external fixation and surgical reconstruction of major joint stabilizers. However, it remains unclear whether or not surgical reconstruction of the major joint stabilizers sufficiently stabilizes the elbow joint or if augmentation by a hinged elbow fixator is beneficial to provide early stability and motion capacity. The aim of the present study was to compare the stabilizing potential of surgical reconstruction versus augmentation by a hinged external elbow in a model of sequentially induced intability of the elbow.

Materials and Methods: 8 unpreserved human upper extremities were mounted to a testing apparatus which was integrated within a material testing machine. In a first series, varus and valgus moments were induced to the intact elbow joint at full extension, as well as at 30°, 60°, 90° and 120° of flexion and the mean angular displacement at 2.5, 5, an 7.5 Nm was calculated. Instability was then induced by sequentially dissecting the lateral and the medial collateral ligament, the radial head, and the posterior capsule. The elbow joint was then sequentially restabilized by osteosynthesis of the radial head and refixation of the lateral and medial collateral ligament using bone anchors. In each sequence, elbow stability was tested with and without augmentation by a hinged external fixator according to the first testing series described above. Biomechanical data of surgical reconstruction alone and surgical reconstruction augmented by external fixation were compared using an analysis of variance.

Results: In the intact elbow, varus-valgus displacement with 7.5 Nm ranged from 8,3 ± 2,4° (0°) to 11,4 ± 4,2° (90°). With the fixator applied, varus-valgus displacement was significantly lower and ranged from 4,2 ± 1,3° (0°) to 5,3 ± 2,2° (90°). After complete destabilization of the elbow joint, maximum varus-valgus displacement ranged from 17,4 ± 5,3° (0°) to 23,6 ± 6,4° (90°). Subsequent reconstruction of the collateral ligaments, the posterior capsule, and the radial head proved to stabilize the elbow joint compared with the unstable situation, however, mean varus-valgus displacement remained significantly higher when compared to the intact elbow joint. During each sequence of instability, the hinged external fixator provided constant stability not significantly different to the intact elbow joint while guiding the elbow through the entire range of motion.

Conclusion: The stabilizing potential of surgical reconstruction alone is inferior to augmentation of a hinged external elbow fixator. In order to proved primary stability and early motion capacity, augmentation of a hinged external elbow fixator in the treatment of acute dislocation of the elbow is recommended.

Advances in algorithms developed with sensor data from smart phones demonstrates the capacity to passively collect qualitative gait metrics. The purpose of this feasibility study was to assess the recovery of these metrics following joint reconstruction. A secondary data analysis of an ethics approved global, multicenter, prospective longitudinal study evaluating gait quality data before and after primary total knee arthroplasty (TKA, n=476), partial knee arthroplasty (PKA, n=139), and total hip arthroplasty (THA, n=395). A minimum 24 week follow-up was required (mean 45±12, range 24 - 78). Gait bouts and gait quality metrics (walking speed, step length, timing asymmetry, and double support percentage) were collected from a standardized smartphone operating system. Pre- and post-operative values were compared using paired-samples t-tests (p<0.05). A total of 595 females and 415 males with a mean age of 61.9±9.3 years and mean BMI of 30.2±6.1 kg/m. 2. were reviewed. Walking speeds were lowest at post-operative week two (all, p<.001). Speeds exceeded pre-operative means consistently by week 21 (p=0.015) for PKA, and week 13 (p=0.007) for THA. The average weekly step length was lowest in post-operative week two (all, p<0.001). PKA and THA cases achieved pre-operative step lengths by week seven (p=0.064) and week 9 (p=0.081), respectively. The average weekly gait asymmetry peaked at week two post-operatively (all, p <0.001). Return to pre-operative baseline asymmetry was achieved by week 11 (p=0.371) for TKA, week six (p=0.541) for PKA, and week eight (p=.886) for THA. Double limb support percentages peaked at week two (all, p<0.001) and returned to pre-operative levels by week 24 (p=0.089) for TKA, week 12 (p=0.156) for PKA, and week 10 (p=0.143) for THA. Monitoring gait quality in real-world settings following joint reconstruction using smartphones is feasible, and may provide the advantage of removing the Hawthorne effect related to typical gait assessments and in-clinic observations

The December 2023 Shoulder & Elbow Roundup. 360. looks at: Clavicle fractures: is the evidence changing practice?; Humeral shaft fractures, and another meta-analysis…let’s wait for the trials now!; Hemiarthroplasty or total elbow arthroplasty for distal humeral fractures…what does the registry say?; What to do with a first-time shoulder dislocation?; Deprivation indices and minimal clinically important difference for patient-reported outcomes after arthroscopic rotator cuff repair; Prospective randomized clinical trial of arthroscopic repair versus debridement for partial subscapularis tears; Long-term follow-up following closed reduction and early movement for simple dislocation of the elbow; Sternoclavicular joint reconstruction for traumatic acute and chronic anterior and posterior instability

There is a paucity of data available for the use of Total Femoral Arthroplasty (TFA) for joint reconstruction in the non-oncological setting. The aim of this study was to evaluate TFA outcomes with minimum 5-year follow-up. This was a retrospective database study of TFAs performed at a UK tertiary referral revision arthroplasty unit. Inclusion criteria were patients undergoing TFA for non-oncological indications. We report demographics, indications for TFA, implant survivorship, clinical outcomes, and indications for re-operation. A total of 39 TFAs were performed in 38 patients between 2015–2018 (median age 68 years, IQR 17, range 46–86), with 5.3 years’ (IQR 1.2, 4.1–18.8) follow-up; 3 patients had died. The most common indication (30/39, 77%) for TFA was periprosthetic joint infection (PJI) or fracture-related infection (FRI); and 23/39 (59%) had a prior periprosthetic fracture (PPF). TFA was performed with dual-mobility or constrained cups in 31/39 (79%) patients. Within the cohort, 12 TFAs (31%) required subsequent revision surgery: infection (7 TFAs, 18%) and instability (5 TFAs, 13%) were the most common indications. 90% of patients were ambulatory post-TFA; 2 patients required disarticulation due to recurrent PJI. While 31/39 (79%) were infection free at last follow-up, the remainder required long-term suppressive antibiotics. This is the largest series of TFA for non-oncological indications. Though TFA has inherent risks of instability and infection, most patients are ambulant after surgery. Patients should be counselled on the risk of life-long antibiotics, or disarticulation when TFA fails

Custom acetabular components have become an established method of treating massive acetabular bone defects in hip arthroplasty. Complication rates, however, remain high and migration of the cup is still reported. Ischial screw fixation (IF) has been demonstrated to improve mechanical stability for non-custom, revision arthroplasty cup fixation. We hypothesise that ischial fixation through the flange of a custom acetabular component aids in anti-rotational stability and prevention of cup migration. Electronic patient records were used to identify a consecutive series of 49 custom implants in 46 patients from 2016 to 2022 in a unit specializing in complex joint reconstruction. IF was defined as a minimum of one screw inserted into the ischium passing through a hole in a flange on the custom cup. The mean follow-up time was 30 months. IF was used in 36 cups. There was no IF in 13 cups. No difference was found between groups in age (68.9 vs. 66.3, P = 0.48), BMI (32.3 vs. 28.2, P = 0.11) or number of consecutively implanted cups (3.2 vs. 3.6, P = 0.43). Aseptic loosening with massive bone loss was the primary indication for revision. There existed no difference in Paprosky grade between the groups (P = 0.1). 14.2% of hips underwent revision and 22.4% had at least one dislocation event. No ischial fixation was associated with a higher risk of cup migration (6/13 vs. 2/36, X2 = 11.5, P = 0.0007). Cup migration was associated with an increased risk for all cause revision (4/8 vs. 3/38, X2 = 9.96, P = 0.0016, but not with dislocation (3/8 vs. 8/41, X2 = 1.2, P = 0.26). The results suggest that failure to achieve adequate ischial fixation, with screws passing through the flange of the custom component into the ischium, increases the risk of cup migration, which, in turn, is a risk factor for revision

Introduction. Joint reconstruction remains a successful and popular surgery with advances in approaches, implants and techniques continually forthcoming. Various methods of skin closure exist to address issues in efficiency, aesthetics, and barrier to infection. While subcuticular skin closure techniques offer an aesthetic advantage to conventional skin stapling, no measurable differences have been reported. Furthermore, newer barbed sutures, such as the V-loc absorbable suture, theoretically distribute tension evenly through the wound and help decrease knot-related complications. To our knowledge, no literature exists on the rate of wound complications in joint arthroplasty with the use of V-loc suture for skin closure. We hypothesize that despite theoretical gains, skin closure with a V-loc (Covidien, Mansfield, MA) absorbable suture should be performed with caution. Methods & Materials. A retrospective chart review was conducted of 278 consecutive primary joint reconstruction cases performed by a single surgeon in 12 months from July 2009 through June 2010. Pre-operative history & physical reports were evaluated for co-morbidities (i.e diabetes mellitus), smoking status and body mass index (BMI). Operative dictations by the attending surgeon provided information on the surgical procedure, use of drain, wound closure technique and type of suture/staple used for skin closure. Skin was closed by the primary surgeon and his chief resident. Wounds were closed via staple gun or subcuticular stitch (3-0 Biosyn vs V-Loc) in a consecutive manner, depending on the surgeon's preference in that period. Post-operative clinic notes were reviewed to determine the occurrence of wound complications, issuance of antibiotic prescriptions, or return to the operating room. The cohort consisted of 106 males and 161 females at an average age of 63 years (range: 18–92). Overall, there were 153 procedures at the knee (including TKA, uni-compartmental arthroplasty, patello-femoral arthroplasty) and 125 procedures at the hip (including THA and hemi-arthroplasty). Results. In review of 278 consecutive primary joint reconstruction cases, there were 17 (6.1%) post-operative wound complications noted, including cellulitis, stitch abscesses, wound dehiscence, and deeper infections requiring OR irrigation and debridement. In 181 cases, staples were used for skin closure; in these cases, seven wound complications were noted (7/181, 3.9%). In 49 cases closed via a subcuticular Biosyn suture there were 4 wound complications noted (4/49, 8.1%). Six wound complications occurred in cases closed with a V-loc suture (6/45, 13.3%). Discussion. Aesthetics and efficiency often are the driving forces of innovation. We present the rate of wound complications in various superficial wound closure methods, including the V-loc, an innovative absorbable barbed suture. Based on our clinical experience, we promote consideration of wound and infectious complications when choosing a method of skin closure in joint reconstruction procedures