Introduction:. Displaced and shortened clavicle shaft fractures can be treated operatively by intra- or extramedullary fixation. The aim of the study was to compare the effectiveness of these two treatment modalities. Methods:. Forty seven patients with acute displaced and shortened clavicle shaft fractures were randomly assigned to either an intramedullary locked fixation group or an anatomically contoured locked plating group. All patients were operated by the same surgeon and had identical post-operative treatment regimes. The effectiveness of both treatment regimens were assessed based on; incision length, operative time and union rate. Disabilities of the Arm, Shoulder and Hand Score (DASH) and Constant Shoulder Score were assessed one year post-operatively. Results:. Twenty-five patients were included in the plating group and twenty-two in the intramedullary fixation group. No differences between the two groups were found for age, gender, fracture comminution and/or displacement. Incision size was significantly (p<0.0001) smaller in the nailing group (38±9 mm) than in the plating group (118±19 mm). In line with this the operating time was also shorter in the nailing group than in the plating groups (43±8 min and 60±19 min, respectively (p=0.0029)). One year postoperatively a 100% union rate was achieved in both groups. Lower DASH scores (2±5 vs 16±18 (p=0.0071)) and higher Constant Shoulder scores (96±6 vs. 90 ± 18 (p=0.0122)), were found in the nailing group. Conclusion:. Both anatomically contoured locked plating and locked intramedullary fixation resulted in successful treatment of displaced and shortened clavicle shaft fractures. Intramedullary fixation however was associated with shorter operating times and smaller incision sizes. In addition, better DASH and Constant Shoulder scores were found in the nailing group one year post operatively. Based on these finding and the absence of prominent subcutaneous hardware necessitating removal of the nail, the intramedullary device is a good alternative to treat displaced clavicle shaft fractures

Purpose. Plating remains the most widely employed method for the fixation of displaced diaphyseal clavicle fractures. The purpose of this study was to assess the efficacy and outcomes of diaphyseal clavicle fractures treated with intramedullary fixation using the Rockwood clavicle pin. Methods. We conducted a retrospective analysis of all diaphyseal clavicle fractures treated with intramedullary fixation using the Rockwood pin between February 2004 and March 2010. Sixty-eight procedures were carried out on 67 patients. Functional outcome was assessed using the Disability of the Arm, Shoulder and Hand (DASH) questionnaire and an overall patient satisfaction questionnaire. Results. There were 52 (77.6%) male and 15 (22.4%) female patients with an average age of 35.8 years. In 35 (51.5%) cases the injury was located on the dominant side. Fractures were classified according to the Edinburgh system with the commonest configuration being the Type 2B1 (47, 69.1%). The indications for fixation were; acute management of displaced fractures (56, 82.4%), delayed union (2, 2.9%), nonunion (8, 11.8%) and malunion (2, 2.9%). The average time to pin removal was 3.7 months and the average follow-up prior to discharge was 6.9 months. Sixty-six (97.1%) fractures united without consequence. Two (2.9%) cases of non-union were treated with repeat fixation using a contoured plate and bone graft. The most common problem encountered postoperatively was discomfort due to subcutaneous pin prominence posteriorly (12, 17.6%) which resolved following removal of the metalwork. The average DASH score was 6.04 (0–60) and 96.4% of patients rated their satisfaction with the procedure as good to excellent. Conclusion. Due to its minimally invasive technique, cosmetically favourable scar, preservation of periosteal tissue, avoidance of stress risers associated with screw removal and good clinical outcomes, the use of this device is the preferred method of treatment for displaced diaphyseal clavicle fractures in our hospital

Introduction

The use of vascularised fibula grafts is an accepted method for reconstructing the distal femur following resection of malignant childhood tumours. Limitations relate to the mismatch of the cross-sectional area of the transplanted fibula graft and thel ocal bone, instability of the construct and union difficulties. We present midterm results of a unique staged technique—an immediate defect reconstruction using a double-barrel vascularised fibula graft set in in A-frame configuration and a subsequent intramedullary femoral lengthening.

Revision knee prostheses are often augmented with intramedullary stems to provide stability following bone loss. However, there are concerns with the use of such stems, including loosening caused by strain-shielding, end-of-stem pain, and removal of healthy bone surrounding the medullary canal. Extracortical fixation plates may present an alternative. The aim of the study was to quantitatively evaluate and compare strain-shielding in the tibia following implantation of a knee replacement component augmented with either a conventional intramedullary stem (design1), or extracortical plates (design2) on the medial and lateral surfaces.

Eight composite synthetic tibiae were implanted with one of the two designs, painted with a speckle pattern, loaded in axial compression (peak 2.5 kN) using a materials test machine, and imaged with a 5-megapixel digital image correlation (DIC) system throughout loading. Bone loss was simulated in all models by removing a volume of metaphyseal bone. For four tibiae, the tibial tray was augmented with a cemented stem (∼150 mm). The others were augmented by extracortical plates (maximum 90 mm long) along the medial and lateral surfaces (Fig. 1). Strains were computed using an ARAMIS 5M software system between loaded and unloaded states in the longitudinal direction, for the medial, posterior and lateral surfaces of the tibiae. Strains were checked locally by use of strain gauge rosettes at three levels on medial, lateral and posterior aspects.

The bone strains measured on the posterior surfaces were reported in three regions; proximal (0–70 mm, where the medial extracortical plate lies), middle (70–130 mm, the stem is present but not the extracortical plates), and distal (130–200 mm, beyond the stem). Mean longitudinal strains for both implant types were comparable in the distal region, and were greater than in the other regions (Fig 2). The mean strains differed considerably in the middle region: 565–715 μstrain with stemmed components 1050–1155 μstrain with plated components. Strains followed a similar pattern in the proximal region, particularly very close (20 mm) to the tibial tray component, where the stemmed component bones (775 ± 160 μstrain) displayed less surface strain than the plated component bones (1210 ± 180 μstrain).

Strain-shielding was observed for both designs. The side plates were shorter than the intramedullary rods, so the region of the bone distal to the plates was not strain-shielded, while the same region was strain-shielded when a stemmed component was implanted. It was also shown that in the region of bone just distal of the tibial tray component, design1 shielded the bone from strain 56% more on average than design2. From these results, it can be speculated that the use of extracortical plate rather than intramedullary stems may lead to improved long-term results of revision TKA, assuming the plates and screws provide adequate stability. The extramedullary fixation system preserves more bone than IM fixation, and has the advantage of allowing use of primary TKA components, cemented over the subframe. Similar components have been developed for the femur.

Aims of study

To assess and compare the functional, radiological and cosmetic results as well as patient satisfaction in patients treated with the IMN Device Vs Volar Locking Plate

Background. This is a continued assessment of the effectiveness of a locked intramedullary device in the treatment of acute clavicle shaft fractures. Results of patients treated thus far were assessed, including patients reported on previously. Description of methods. Patients admitted with midshaft clavicle fractures were assessed to determine whether operative fixation of the fracture was required. Indications for surgery were midshaft clavicle fractures with 100% displacement; more than 1.5 cm of shortening, presence of a displaced butterfly segment, bilateral clavicle fractures, ipsilateral displaced glenoid neck fractures, skin and neurovascular compromise. Patients that matched the criteria for surgery were treated operatively with an intramedullary locked device by the author. Post-operatively, patients were kept in a shoulder immobilizer for a period of 6 weeks. Patients were invited to attend a scheduled follow-up visit where the data was collected that comprised the review. All patients were assessed by the surgeon, a radiologist, a physiotherapist and an occupational therapist. Scar size and quality, Dash score, Constant Shoulder score, complications and the radiological picture were assessed. Summary of results. 50 patients (52 clavicle fractures – 2 patients sustained bilateral fractures), 28 males and 22 females with a mean age of 30 attended the schedule data collection visit and were included in the study. 48 clavicles achieved complete union with the remaining 4 fractures progressing normally to union at 10 and 12 weeks post surgery. No additional complications than those reported on previously were encountered. Conclusion. Locked intramedullary fixation of clavicle shaft fractures that match the criteria for operative fixation continues to give good results. No non-unions were found and a high level of patient satisfaction was achieved. The operative technique continues to be refined leading to less fixation related complications. MULTIPLE DISCLOSURES

Purpose of study:

To assess the effectiveness of a novel locked intra-medullary device in the treatment of acute clavicle shaft fractures.

Introduction. The management of fracture-related infection has undergone radical progress following the development of international guidelines. However, there is limited consideration to the realities of healthcare in low-resource environments due to a lack of available evidence in the literature from these settings. Initial antimicrobial suppression to support fracture union is frequently used in low- and middle-income countries despite the lack of published clinical evidence to support its practice. This study aimed to evaluate the outcomes following initial antimicrobial suppression to support fracture union in the management of fracture-related infection. Materials & Methods. A retrospective review of consecutive patients treated with initial antimicrobial suppression to support fracture healing followed by definitive eradication surgery to manage fracture-related infections following intramedullary fixation was performed. Indications for this approach were; a soft tissue envelope not requiring reconstructive surgery, radiographic evidence of stable fixation with adequate alignment, and progression towards fracture union. Results. This approach was associated with successful treatment in 51/55 (93%) patients. Fracture union was achieved in 52/55 (95%) patients with antimicrobial suppression alone. Remission of infection was achieved in 54/55 (98%) patients following definitive infection eradication surgery. Following antibiotic suppression, 6/46 (13%) pathogens isolated from intra-operative samples demonstrated multi-drug resistance. Conclusions. Initial antimicrobial suppression to support fracture healing followed by definitive infection eradication surgery was associated with successful treatment in 93% of patients. The likelihood of remission of infection increases when eradication surgery is performed in a healed bone. This approach was not associated with an increased risk of developing multi-drug-resistant infections compared to contemporary bone infection cohorts in the published literature

Purpose. Intramedullary fixation of clavicle fractures requires an adequate medullary canal to accommodate the fixation device used. This computer tomography anatomical study of the clavicle and its medullary canal describes its general anatomy and provides the incidence of anatomical variations of the medullary canal that complicates intramedullary fixation of midshaft fractures. Methods. Four hundred and eighteen clavicles in 209 patients were examined using computer tomography imaging. The length and curvatures of the clavicles were measured as well as the height and width of the clavicle and its canal at various pre-determined points. The start and end of the medullary canal from the sternal and acromial ends of the clavicle were determined. The data was grouped according to age, gender and lateralization. Results. The average length of the clavicle was 151.15mm with the average sternal and acromial curvature being 146° and 133° respectively. The medullary canal starts on average 6.59mm from the sternal end and ends 19.56mm from the acromial end with the average height and width of the canal at the middle third being 5.61mm and 6.63mm respectively. Conclusion. The medullary canal of the clavicle is large enough to accommodate commonly used intramedullary devices in the majority of cases. The medullary canal extends far enough medially and laterally to ensure that an intramedullary device can be passed far enough medially and laterally past the fracture site to ensure stable fixation in most middle third clavicle fractures. An alternative surgical option should be available in theatre when treating females as the medullary canal is too small to pass an intramedullary device past the fracture site on rare occasions. Fractures located within 40mm of the lateral or medial ends of the clavicle should not be treated by intramedullary fixation as adequate stability is unlikely to be achieved. MULTIPLE DISCLOSURES

The “keel” is the relatively short part of the undersurface of the tibial component that extends into the medullary canal. Most knee replacement systems have the capacity to attach modular stem extensions for enhanced intra-medullary fixation for revision. Diaphyseal length, large diameter stems may also guide positioning of trial components and are ideal for accurate surgical technique, even if fully cemented stems are eventually implanted. Smaller diameter non-modular stem extensions may be used for fully cemented fixation. They do not however guide component position very accurately and do not make sense for uncemented fixation. Revision surgery is different from primary surgery and enhanced fixation with some type of intramedullary fixation is highly appropriate, especially if constrained devices might be required. Options for enhanced intramedullary fixation are: 1. Fully cemented metaphyseal or shorter stems; 2. Diaphyseal engaging press fit stems; and 3. Very short fully cemented stems with trabecular metal cone fixation. Metaphyseal length press fit stems do not provide reliable fixation in revision TKA. Revision with primary components or constrained components without any stem extension is not advised

Purpose of Study. To see if the addition of a locking plate to FD rod fixation of osteogenesis imperfecta confers extra strength and allows earlier mobilisation. Introduction. Osteogenesis imperfecta is a heterogeneous group of disorders with congenital osseous fragility. The goal of surgery is to minimise the incidence of fracture and correct deformity. The concept of multilevel osteotomies and intramedullary fixation with a non-extendable nail was popularised by Sofield and Millar in 1959. The Bailey Dubow telescoping nail was introduced in 1963. The Fassier-Duval (FD) telescoping nail is a more recent design inserted via smaller incisions, in conjunction with percutaneous osteotomies. However there are still problems. Often the medullary canal may be too narrow to harbour a nail of adequate size for the body. Furthermore they do not give significant rotational control, which is compounded by the elasticity of the soft tissues. Methods. We treated two patients with Osteogenesis imperfecta with supplementary unicortical locked plating in addition to intramedullary fixation with FD rods. Results. The patients both underwent femoral fixation. Both had deformity and previous femoral stress fractures treated non operatively. One patient, aged 24, was non ambulant pre-operatively. She was allowed to transfer without a brace immediately post operatively. The other patient, aged 64 years and ambulant indoors, initially had additional fixation with a non- locking semitubular plate that went onto fail, therefore had revision fixation with a locking plate. She was asked to bear weight as tolerated in a brace immediately post-op. Conclusion. Classically, plates and screws have been avoided in Osteogenesis imperfecta due to the predisposition to fracture at the ends of the plate. We have found that the extra fixation enables extra strength where the nail size is small, and helps control rotation in the post-operative period, allowing earlier mobility

Background. Endoprosthetic reconstruction is an established method of treatment for primary bone tumours in children. Traditionally these were implanted with cemented intramedullary fixation. Hydroxyapatite collars at the shoulder of the implant are now standard on all extremity endoprostheses, but older cases were implanted without collars. Uncemented intramedullary fixation with hydroxyapatite collars has also been used in an attempt to reduce the incidence of problems such as aseptic loosening. Currently there are various indications that dictate which method is used. Aims. To establish long term survivorship of cemented versus uncemented endoprosthesis in paediatric patients with primary bone tumours. Methods. This was a retrospective study of 441 endoprostheses implanted in 367 consecutive patients aged 18 years or less, between 1973 and 2005. This included the use of case notes, hospital databases and a radiological review. Information obtained included patient demographics, indications for surgery, anatomical distribution and type of implants, complications and survivorship. Results. Mean age was 13.9 (range 3 - 38). 210 patients were male, 157 were female. There were 364 primaries and 77 revision implants. 161 extendable and 280 definitive prostheses. 282 patients had osteosarcoma, 54 had Ewing's sarcoma and 28 had other diagnoses. Commonest sites included 197 distal femoral replacements, 85 proximal tibial implants and 57 were in the upper limb. Kaplan-Meier survival analysis was used to compare anatomical sites and method of fixation. Upper limb implants had the best long term survival. Failure rates for distal femoral replacements were compared for cemented fixation (21.7% due to aseptic loosening) with cement plus hydroxyapatite collars (3.1%) and uncemented implants with hydroxyapatite collars (6.2%). Conclusions. In the distal femur cemented fixation with hydroxyapatite collars gave the best survivorship in definitive primary prostheses. Uncemented fixation with hydroxyapatite collars gave the best survivorship in extendable prostheses. Cemented fixation without hydroxyapatite gave the worst survivorship

Damage Control techniques involve primary external fracture fixation to reduce the ‘second hit’ of surgery. This study used a large animal (ovine) trauma model to compare pathophysiological responses of primary external femoral fixation and intramedullary stabilisation. Under terminal anaesthesia bilateral femoral fractures and hypovolaemia were produced using a pneumatic ram. 24 sheep were randomised into 4 groups and monitored for 24 hours. Group 1 – Control; Group 2 – Trauma only; Group 3 – Trauma and external fixation; Group 4 – Trauma and reamed intramedullary stabilisation. Outcome measures: pulmonary embolic load (transoesophageal echocardiography); plasma coagulation markers; bronchoalveolar lavage differential cell counts (neutrophils, lymphocytes and macrophages). Total embolic load was significantly higher (p<0.001) in the intramedullary fixation group (median score 42 versus 20). All trauma groups had a significant increase (p < 0.05) in prothrombin time with a fall in antithrombin III and fibrinogen levels. No significant differences occurred between trauma groups with any coagulation or alveolar lavage marker. Intramedullary femoral fracture fixation produced a relatively higher pulmonary embolic load. However, the initial fracture fixation method did not affect any of the changes seen in the measured coagulation or inflammatory markers during the first 24 hours of injury

This edition of Cochrane Corner looks at some of the work published by the Cochrane Collaboration, covering interventions for treating distal femur fractures in adults; ultrasound and shockwave therapy for acute fractures in adults; and local corticosteroid injection versus placebo for carpal tunnel syndrome.

Some DEFINITIONS are necessary: “STEMS” refers to “intramedullary stem extensions”, which may be of a variety of lengths and diameters, fixed with cement, porous coating or press fit alone and which may be modular or an inherent part of the prosthesis. The standard extension keel on the tibia does not qualify as a “stem (extension)”. COMPLEX implies multiple variables acting on the end result of the arthroplasty with the capability of inducing failure, as well as necessary variations to the standard surgical technique. A lesser degree of predictability is implied. More specifically, the elements usually found in an arthritic knee and used for the arthroplasty are missing, so that cases of COMPLEX primary TKA include: Soft tissue coverage-(not relevant here), Extensor mechanism deficiency-patellectomy, Severe deformity, Extra-articular deformity, Instability: Varus valgus, Instability: Plane of motion, Instability: Old PCL rupture, Dislocated patella, Stiffness, Medical conditions: Neuromuscular disorder, Ipsilateral arthroplasty, Prior incisions, Fixation hardware, Osteopenia, Ipsilateral hip arthrodesis, Ipsilateral below knee amputation, etc. Complexity includes MORE than large deformity, i.e., success with large deformity does NOT mean success with constrained implants regardless of indication. In addition, the degree of constraint must be specified to be meaningful. NECESSARY presumably this means: “necessary to ensure durable fixation in the face of poor bone quality or more mechanically constrained” and SUFFICIENT suggests that stems, by themselves or in some shape of form, by themselves “will ensure success (specifically here) of fixation”. If we can start with the second proposal, that STEMS are SUFFICIENT for success the answer is: “NO”, many more aspects of surgical technique and implant design are required. Even if all other aspects of the technique are exemplary, some types of stems or techniques are inadequate, e.g., completely uncemented, short stem extensions. The answer to the first proposal is: “YES, in many cases”. The problem will be to determine which cases. There are philosophical analogies to this question that we already know the answer to. ANALOGY: Is a life-raft necessary on a boat? Yes, you may not use it, but it is considered necessary. Is a life-raft “sufficient” on a boat? No, other problems may occur. Are seat belts necessary? Are child seats necessary? The AAOS already has a position on child restraints, an analogous situation, where a party who cannot control their situation (anesthetised patient/ child) functions in the care of a responsible party. The objection may be argued in terms of cost saving by NOT using increased fixation. A useful analogy, (that would of course require specific analysis), is that of patellar resurfacing: universal resurfacing is cost-effective when considering the expense of even a small number of secondary resurfacings. Of course a complex arthroplasty that requires a revision procedure is far more expensive than secondary patellar resurfacing and so universal use of the enhanced fixation in the face of increased constraint makes sense. The human cost of revision surgery tips the balance irrefutably. DANGER-We must avoid the glib conclusion, often based on poor quality data, that constrained implants do not need additional intramedullary fixation (with stem extensions). When “complexity” is involved, complex analysis is appropriate to select the best course

Limb deformity is common in patients presenting for knee arthroplasty, either related to asymmetrical wear patterns from the underlying arthritic process (intra-articular malalignment) or less often major extra-articular deformity due to prior fracture malunion, childhood physical injury, old osteotomy, or developmental or metabolic disorders such as Blount's disease or hypophosphatemic rickets. Angular deformity that is above the epicondyles or below the fibular neck may not be easily correctable by adjusted bone cuts as the amount of bone resection may make soft tissue balancing impossible or may disrupt completely the collateral ligament attachments. Development of a treatment plan begins with careful assessment of the malalignment which may be mainly coronal, sagittal, rotational or some combination. Translation can also complicate the reconstruction as this has effects directly on location of the mechanical axis. Most intra-articular deformities are due to the arthritic process alone, but may occasionally be the result of intra-articular fracture, periarticular osteotomy or from prior revision surgery effects. While intra-articular deformity can almost always be managed with adjusted bone cuts it is important to have available revision type implants to enhance fixation (stems) or increase constraint when ligament balancing or ligament laxity is a problem. Extra-articular deformities may be correctable with adjusted bone cuts and altered implant positioning when the deformity is smaller, or located a longer distance from the joint. The effect of a deformity is proportional to its distance from the joint. The closer the deformity is to the joint, the greater the impact the same degree angular deformity will have. In general deformities in the plane of knee are better tolerated than sagittal plane (varus/valgus) deformity. Careful pre-operative planning is required for cases with significant extra-articular deformity with a focus on location and plane of the apex of the deformity, identification of the mechanical axis location relative to the deformed limb, distance of the deformity from the joint, and determination of the intra-articular effect on bone cuts and implant position absent osteotomy. In the course of pre-operative planning, osteotomy is suggested when there is inability to correct the mechanical axis to neutral without excessive bone cuts which compromise ligament or patellar tendon attachment sites, or alternatively when adequate adjustment of cuts will likely lead to excessive joint line obliquity which can compromise ability to balance the soft tissues. When chosen, adjunctive osteotomy can be done in one-stage at the time of TKA or the procedures can be done separately in two stages. When simultaneous with TKA, osteotomy fixation options include long stems added to the femoral (or tibial) component for intramedullary fixation, adjunctive plate and screw fixation, and antegrade (usually locked) nailing for some femoral osteotomies. Choice of fixation method is often influenced by specific deformity size location, bone quality and amount, and surgeon preference. Surgical navigation, or intra-operative x-ray imaging methods (or both) have both been used to facilitate accurate correction of deformity in these complex cases. When faced with major deformity of the femur or tibia, with careful planning combined osteotomy and TKA can result in excellent outcomes and durable implant fixation with less constraint, less bone loss, and better joint kinematics than is possible with modified TKA alone

Presenters Position:. Purpose of Study:. To perform a retrospective audit of the spectrum of management of tibial pseudarthrosis by a single surgeon over a seven year time period. Description of Methods:. All discharge summaries and operation logs from 2004 to 2011 were reviewed to identify patients, and their case notes and x-rays were examined. Patients were contacted telephonically for follow-up examination. Summary of Results:. Eleven patients presented with pseudarthrosis or bowing of the tibia (six females, five males, age range 4 months–7 years). Three were being treated conservatively and two patients had undergone primary below-knee amputation for severe deformity and functional deficit. Six patients had undergone resection of the pseudarthrosis with intramedullary fixation with a Williams' rod. Three of these patients had Neurofibromatosis type 1. In all instances autogenous iliac crest bone graft was used. Fibular osteotomy was performed in five of these patients and the fibula was stabilised with a K-wire in four patients. All patients were discharged in an above knee cast. Mean follow-up from 1st surgery was 23.75 (1.5–72) months. In one patient, histology confirmed suspected fibrous dysplasia. One patient had had a revision procedure 12 months prior to last follow-up for re-fracture and rod displacement. Mean residual deformity was recorded as 4.2° (1° to 10°) valgus and 6.6° (−2° to 20°) anterior bowing. We had no instances of non-union or sepsis at latest follow-up in this small series. Conclusion:. Patients with tibial pseudarthrosis have a wide spectrum of presentation. Not every patient requires immediate surgery. Our treatment aim in the young patient is to maintain optimum ambulation, clinical union and alignment with radiographic appearance assuming secondary consideration. In our hands, internal fixation using a Williams' rod with autograft is safe and effective as the initial surgical procedure. Continued follow-up of these patients is mandatory as the risk of complications is high even after apparent union

Purpose of the study:. To determine the outcomes of cases converted from an external fixator to an internal fixation device in the management of limb reconstructions and deformity corrections. Method:. A retrospective review of 18 patients, that underwent a conversion procedure to internal fixation following long term external fixation use, was done. This comprised 24 limbs. Inclusion criteria: All cases of long term external fixator use converted to internal fixation over a 5 year period. Average external fixation time, pin site care, conversion timing, surgical device used as well as outcome were documented. Results:. The mean treatment time in an external fixator was 185 days (61–370). The reasons for conversion included patient dissatisfaction, pin tract sepsis and a refracture. The conversion procedures included 8 intramedullary nail fixations and 16 plate and screw fixations. An acute conversion was identified as an internal fixation that was done in the same sitting as external fixator removal. A delayed conversion was any internal stabilisation that was done thereafter. In total, the complication rate associated with conversion to internal fixation following long term external fixation was 25%, mainly due to persistent non-union or sepsis. In the 8 conversions to intramedullary nails, 7 were acute: 4 had good outcomes with sepsis free union being achieved. 3 had poorer outcomes with a non-union and 2 amputations being documented. The single delayed nailing achieved union. In the 16 conversions to plate fixation, 13 achieved union. 10 were acute conversions and 3 were delayed. The remaining 3 that developed complications included 2 acute conversions with septic non-unions and a single delayed conversion which resulted in sepsis. Conclusion:. Conversion of an external fixator to an internal fixator in a non-acute reconstructive setting has a 75% success rate. In the acute conversion group (19 cases), plate and screw fixation had a superior outcome. In the delayed conversion group (5 cases), intramedullary fixation was favoured

Purpose. We retrospectively evaluated the outcome of fibula grafts in upper limb post infectious diaphyseal gap nonunions and assessed the following modifiers: age, site, vascularised/ nonvascularised, and length of the graft on time to union, graft incorporation, complication rate and reoperation rate. Methods. Thirty seven paediatric upper limb segmental defects treated over a period of 10 years were identified. Twenty two post septic defects in 21 children were treated with intramedullary fixation and vascularised/ nonvascularised fibula grafting. Union time was assessed from records and radiographs. Graft incorporation was assessed using Pixel value ratio (Hazra et al). Complications were defined as nonunion, delayed union, implant failure, refractures, graft loss and infection. Results. Twenty one children with 22 nonunions, 9 boys and 12 girls, mean age 6.5 years were followed up for a mean of 24 months. Defects (humerus-8, radius-8, ulna-6) ranged from 10 mm to 85 mm before surgery. Seven vascularised grafts(mean length = 69.9 mm) 3 in ulna and 4 in radius and 14 nonvascularised (48.8 mm) were 8 in humerus, 4 in radius, 3 in ulna. Primary union was 81% at a mean of 4.7 months. Mean pixel value for graft incorporation was 1.3 (SD = 0.2) on immediate postoperative radiograph and 1.08 (SD 0.16) at mean of 2 years. Complications included nonunion requiring surgery in 4, delayed union in 6, wire migration in 6, refractures in 4, infection reactivation in 2 with loss of graft in 1. Time to union was 5.5 (SD 2.9) months in nonvascularised and 3.1 (SD 0.6) in vascualrised group (P = 0.04). Complication rate was 1.2 and 0.2 in nonvascularised and vascularised grafts(p = 0.04). Bone, age and the graft length did not significantly affect union time, graft incorporation, complication and reoperation rate. The complication rate was significantly higher in children ≤8 year; however other outcomes were not significantly different. Conclusion. Vascularised grafts and children aged >8 year did significantly better in fibular grafting for post-septic upper limb diaphyseal nonunions

Practice variation may occur when there is no standardised approach to specific clinical problems and there is a lack of scientific evidence for alternative treatments. Practice variation suggests that a segment of the patient population may be managed sub-optimally, and indicates a need for further research in order to establish stronger evidence-based practice guidelines. We surveyed Australian orthopaedic surgeons to examine practice variation in common orthopaedic presentations. In February 2009, members of the Australian Orthopaedic Association were emailed an online survey, which collected information regarding experience level (number of years as a consultant), sub-specialty interests, state where the surgeon works, on- call participation, as well as five common (anecdotally controversial) orthopaedic trauma cases with a number of management options. Surgeons were asked to choose their one most likely management choice from the list provided, which was either surgical or non-surgical in nature. A reminder was sent two weeks later. Exploratory regression was modeled to examine the predictors of choosing surgical management for each case and overall. Of 760 surgeons, 358 (47%) provided responses. For undisplaced scaphoid fractures, respondents selected short-arm cast (53%), ORIF (22%), percutaneous screw (22%) and long-arm cast (3%). Less experienced (0 to 5 years) (p=0.006) and hand surgeons (p=0.008) were more likely to operate. For a displaced mid-shaft clavicle fracture, respondents selected non-operative (62%), plating (31%) and intramedullary fixation (7%). Shoulder surgeons were more likely to operate (p<0.001). For an undisplaced Weber B lateral malleolus fracture, respondents selected plaster cast or boot (59%), lateral plating (31%), posterior plating (9%) and no splinting (2%). For a displaced Colles fracture in an older patient, respondents selected plating (47%), Kirschner wires (28%), cast/splint (23%) and external fixation (1%). Less experienced (p<0.001) and hand surgeons (p=0.024) were more likely to operate. For a two-part neck of humerus fracture in an older patient, respondents selected non-operative (74%), locking plate (14%), and hemiarthroplasty (7%). Shoulder surgeons were more likely to operate (p<0.001). Accounting for all answers in multiple regression modeling, it was found that more experienced surgeons (>15 years) were 25% less likely to operate (p=0.001). Overall, there was no difference among sub-specialties, or whether a surgeon participated in an on-call roster. Considerable practice variation exists among orthopaedic surgeons in the approach to common orthopaedic problems. Surgeons who identify with a sub-specialty are more likely to manage conditions in their area of interest operatively, and more experienced surgeons are less likely to recommend surgical management