Pre-existing hip pathology such as femoroacetabular impingement is believed by some, to have a direct causal relationship with osteoarthritis of the hip. The strength of this relationship remains unknown. We investigate the prevalence of abnormal bone morphology in the symptomatic hip on the pre-operative anteroposterior pelvic radiograph of consecutive patients undergoing hip resurfacing. Rotated radiographs were excluded. One hundred patients, of mean age 53.5 years were included (range 33.4–71.4 years, 32% female). We examined the films for evidence of a cam-type impingement lesion (alpha angle >50.5°, a pistol grip, Pitt's pits, a medial hook, an os acetabuli and rim ossification), signs of acetabular retroversion or a pincer-type impingement lesion (crossover sign, posterior wall sign, ischial sign, coxa profunda, protrusio, coxa vara, Tonnis angle < 5°), and hip dysplasia (a Tonnis acetabular angle >14° and a lateral centre-edge angle of Wiberg <20°). Pre-existing radiographic signs of pathology were present in a large proportion of hips with low grade (Tonnis grade 1–2) arthritis. There is a group of patients who presented with more advanced osteoarthritis in which we suspect abnormal bone morphology to be a causative factor but, for example, neck osteophytes obscure the diagnosis of a primary cam lesion. Our findings corroborate those of Harris and Ganz. Impingement is radiographically detectable in a large proportion of patients who present with early arthritis of the hip, and therefore we agree that it is a likely pre-cursor for osteoarthritis. Treatments directed at reducing hip impingement may stifle the progression of osteoarthritis

Arthroscopic hip surgery is increasingly common in Australia. Hip arthroscopy is indicated for a range of diagnostic and therapeutic purposes, including labral tears, capsular laxity and femoral-acetabular impingement (FAI). Despite this, previous cohort studies aiming to characterise hip pathology seen on arthroscopic examination are mostly limited to patients with known diagnoses of FAI. Therefore, little is known of the native articular wear patterns encountered in other disease states. Therefore, we aimed to define common osteochondral wear patterns for a cohort of patients managed via hip arthroscopy. We retrospectively analysed intraoperative data for 1127 patients managed via hip arthroscopy between 2008 and 2013, for either therapeutic or diagnostic purposes. Intraoperative data was categorized by location (A-E as defined by Fontana et al. 2016) and chondral damage (0-4 scale as defined by Beck et al. 2005) with respect to both acetabulum and femoral head. Data for 1127 patients were included. Location of acetabular chondral pathology was variable with locations C. 1. and D. 1. representing the most common regions of damage. Labral tears predominated in locations C and D. Femoral chondral pathology was evenly distributed. The degree of femoral chondral injury was predominantly grade 1, whilst acetabular wear was evenly distributed. Large proportions of wear were observed at the peripheral superior and anterior regions of the lunate surface of the acetabulum in keeping with prior works. However, we observed higher rates of central wear and lower rates of grade 4 acetabular damage extending into superior/posterior zones, in our cohort. Our work characterises common articular wear patterns encountered at the time of hip arthroscopy. Further inquiry into the natural history of osteochondral lesions is needed to better understand and manage these conditions

Introduction. Stand to sit pelvis kinematics is commonly considered as a rotation around the bicoxofemoral axis. However, abnormal kinematics could occur for patients with musculoskeletal disorders affecting the hip-spine complex. The aim of this study is to perform a quantitative analysis of the stand to sit pelvis kinematics using 3D reconstruction from bi-planar x-rays. Materials and Methods. Thirty healthy volunteers as a control group (C), 30 patients with hip pathology (Hip) and 30 patients with spine pathology (Spine) were evaluated. All subjects underwent standing and sitting full-body bi-planar x-rays. 3D reconstruction was performed in each configuration and then translated such as the middle of the line joining the center of each acetabulum corresponds to the origin. Rigid registration quantified the finite helical axis (FHA) describing the transition between standing and sitting with two specific parameters. The orientation angle (OA) is the signed 3D angle between FHA and bicoxofemoral axis and the rotation angle (RA) represents the signed angle around FHA. Pelvic incidence, sacral slope and pelvic tilt were also measured. After checking normality of distribution, parameters were compared statistically between the 3 groups (p<0.05). Results. The mean value of the orientation angle in control group was −1.8° (SD 10.8°, range −26° to 25°). The mean value of the OA was 0.3° (SD 12.3°, range to −31° to 37°) in Hip group and −4.7° (SD 21.5°, range −86° to 38°) in Spine group. There was no significant difference in mean OA among groups. However, the more subnormal and abnormal patients were in Spine group compared to C and Hip groups. The mean value of the rotation angle in C group was 18.1° (SD 9.1°, range 5° to 43°). There was significant difference in RA between Hip and Spine groups (21.1° (SD 8.0°) and 16.0° (SD 10.7°), respectively) (p=0.04). Conclusion. This study highlights new informations obtained by the quantitative analysis of pelvis rotation between standing and sitting in healthy, hip pathology patients and spine pathology patients using 3D reconstruction from bi-planar radiographs. Hip and spine pathologies affect stand to sit pelvic kinematics. Surgeons should be aware of potential abnormal stand to sit transition in such clinical situations. This improved assessment of the pelvic rotational adaptation could lead to a more personalized approach for the planning of hip prostheses

Management of the young adult hip pathologies is a special entity in orthopaedic surgical practice that needs special emphasis and consideration. A wide range of pathological and traumatic conditions occur in the young adult hip that lead to functional disability and the development of premature osteoarthritis. Proper surgical interference when the hip is still in the pre-arthritic stage restores function to the young hip and protects it from early degenerative changes, and hence the anticipated need for future joint replacement surgery is prevented. Accurate estimation of the biomechanical error combined with careful understanding of the hip joint biology is the cornerstone of success of any hip preservation surgery ever performed to save the young adult hip. Safe surgical hip dislocation approach was adopted as one of the tools in the hands of the hip preservation surgeon to treat a broad spectrum of intra-articular hip pathologies like Perthes disease and severe forms of slipped capital femoral epiphysis (SCFE). Osteo-chondroplasty at the head-neck junction with relative femoral neck lengthening for Perthes disease, and Subcapital re-orientation of severe SCFE based on its retinacular vascular pedicle are often performed via the surgical hip dislocation approach. The approach is also useful with certain types of acetabular fractures that enables fixation of dual-column fractures via single approach with intra-articular visualization for the accuracy of reduction and hardware placement. The 4 cm mini-open direct anterior approach is ideal for the surgical treatment of cases with cam and/or pincer types of femoro-acetabular impingement. Peri-articular osteotomies performed either on the acetabular or the femoral sides of the hip joint are extremely useful in the correction of the biomechanical error that led to an existing hip pathology. Periacetabular osteotomies are commonly performed to treat dysplasia of the young hip. Proximal femoral osteotomies are commonly performed to treat a wide range of hip pathologies including non-unions of femoral neck fractures in the young adult. Correction of the biomechanical error at the proper timing ensures normalization of the hip joint loading conditions and range of motion that leads to reversal of the pathologic process and prevention of osteoarthritis. A hip joint replacement would have an unknown but certainly a finite life, whereas a young hip that has healed after hip preservation surgery would definitely last for a lifetime

Total knee arthroplasty (TKA) is one of the most common orthopaedic operations performed worldwide and it is largely successful in pain relief and functional recovery. However, when pain persists post-operatively the thorough evaluation must be instituted. Extra-articular causes of knee pain include; hip pathology, lumbar spine degenerative disease or radicular symptoms, focal neuropathy, vascular disease, and chronic regional pain syndrome. Intra-articular causes of knee pain: infection, crepitation/clunk, patella osteonecrosis, patella mal-tracking, soft tissue imbalance, malalignment, arthrofibrosis, component loosening, implant wear, ilio-tibial band irritation, and bursitis. Other causes of pain to rule out are component overhang with soft tissue irritation, recurrent hemarthrosis secondary to synovial impingement or entrapment, non-resurfaced patella, and metal sensitivity. A careful history may reveal previous knee surgeries with delayed healing or prolonged drainage, chronology of sign and symptoms, co-morbid medical conditions, jewel or metal sensitivity. Physical exam should help with specific signs in the operated knee. Targeted local anesthetic blocks are helpful and response to lumbar sympathetic blocks determines presence of CRPS. Lab tests are important: ESR, CRP, WBC, aspiration with manual cell count and diff, leucocyte esterase dipstick, RA titers, metal derm patch testing, nuclear scans, CT best for rotational malalignment, and MARS MRI. More recently patient satisfaction as an outcome measure has shown TKA results not satisfactory in 11- 18% of patients. A discordance of patient vs. surgeon satisfaction exists so the following factors may help improve this: correct patient selection, establishing and correlating surgeon-patient expectations, peri-operative optimization of patient co-morbidities to help avoid preventable complications, use of pre-operative and post-operative pathways. Satisfaction rates can best be improved by addressing the previous points with patients prior to TKA surgery

TKA is one of the most common orthopaedic operations performed worldwide and it is largely successful in pain relief and functional recovery. However, when pain persists post-operatively the thorough evaluation must be instituted. Extra-articular causes of knee pain include; hip pathology, lumbar spine degenerative disease or radicular symptoms, focal neuropathy, vascular disease, and chronic regional pain syndrome. Intra-articular causes of knee pain: infection, crepitation/ clunk, patella osteonecrosis, patella mal-tracking, soft tissue imbalance, malalignment, arthrofibrosis, component loosening, implant wear, ilio-tibial band irritation, and bursitis. Other causes of pain to rule out are component overhang with soft tissue irritation, recurrent hemarthrosis secondary to synovial impingement or entrapment, non-resurfaced patella, and metal sensitivity. A careful history may reveal previous knee surgeries with delayed healing or prolonged drainage, chronology of sign and symptoms, co-morbid medical conditions, jewel or metal sensitivity. Physical exam should help with specific signs in the operated knee. Targeted local anesthetic blocks are helpful and response to lumbar sympathetic blocks determines presence of CRPS. Lab tests are important: ESR, CRP, WBC, aspiration with manual cell count and diff, leukocyte esterase dipstick, RA titers, metal derm patch testing, nuclear scans, CT best for rotational malalignment,, and MARS MRI. More recently patient satisfaction as an outcome measure has shown TKA results not satisfactory in 11 – 18% of patients. A discordance of patient vs. surgeon satisfaction exists so the following factors may help improve this: correct patient selection, establishing and correlating surgeon-patient expectations, peri-operative optimisation of patient comorbidities to help avoid preventable complications, use of pre- and post-operative pathways. Satisfaction rates can best be improved by addressing the previous points with patients prior to TKA surgery

Introduction. Dysplastic hip has not only deficiency of acetabulum but also femoral deformity. Therefore, selection of stem is important in cementless THA for dysplasia. Especially using of short stem should be challenge for deformed femur. We studied clinical performance and radiological findings after THA with triple tapered short stem (Optimys hip) for dysplastic hip. Materials and method. From May 2013, we performed cementless THA for osteoarthritis with dysplasia. Seventy-one hips of 67 patients were examined including four males and 63 females. Age at surgery was from 36 to 88 years old (61.7 in average). Surgical approach was used modified Watson-Jones in all hips. Clinical evaluation was used modified Harris hip score (MHSS), incidence of complications and thig pain. Radiological findings were evaluated according Engh's classification and grade of stress shielding. Follow-up period was minimum one year and was 21.3 months in average. Results. MHHS before surgery was 41 points and that at follow-up was 88 points in average and pain score was significantly improved. Calcar fracture during surgery occurred in two hips and circular wiring was performed. Deep infection, DVT and dislocation were not observed. Incidence of thigh pain was 1.4% of one hip. Radiological findings were assessed as bone in-grown in all of the hips and grade of stress-shielding was very low. There were no aseptic loosening and no revision for any reasons. Conclusions. Cementless THA with triple tapered short stem was useful for treatment of dysplastic hips. Radiological findings of all hip were assessed as bone in-grown

Background. Modular component options can assist the surgeon in addressing complex femoral reconstructions in total hip arthroplasty (THA) by allowing for customization of version control and proximal to distal sizing. Tapered stem fixation has a proven excellent track record in revision THA. Early reports by Cherubino et al. (Surg Technol Int 2010) 65 revision THA with an average follow up of 109 months (range, 76–131) demonstrate satisfactory integration in 100% of cases. Rodriguez et al.(J Arthroplasty 2009) report 96% survival in 102 revision THA at nearly 4 years average follow up. We review the early clinical results of a modular tapered femoral revision system. Methods. A query of our practice's arthroplasty registry revealed 60 patients (61 hips) who signed an IRB-approved general research consent allowing retrospective review, and underwent THA performed with the modular femoral revision system between December 2009 and April 2012. There were 35 men (58%) and 25 women (42%). Mean age was 65.1 years (range, 35–94) and BMI was 31.3 kg/m2 (range, 14–53). Procedures were complex primary in 1 hip, conversion in 6 (10%), revision in 32 (53%), and two-staged exchange for infection in 22 (33%). Two-thirds of the procedures included complete acetabular revision (n=40), while 31% (19) involved liner change only and 2 were isolated femoral revisions. Results. At an average follow-up of 1.5 years (maximum: 3.7 years) there have been no revisions or failures of the femoral component. Average Harris hip scores (0 to 100 possible) improved from 44.2 preoperatively to 66.0 at most recent evaluation, while the pain component (0 to 44 possible) improved from 15.8 to 31.2. Complications requiring surgical intervention included intraoperative periprosthetic femur fracture in one patient returned to the operating suite same day for open reduction internal fixation, which further required incision and debridement for superficial infection at 1 year postoperative; and two patients with dislocation and fracture of the greater trochanter treated with open reduction, revision of the head and liner, and application of cerclage cables, one of which required removal of a migrated claw 10 months later followed 2 weeks subsequently with incision and debridement for a non-healing wound. Postoperative radiographs were available for review for 59 THA in 58 patients. Analysis of the femoral component revealed satisfactory findings in 50 hips (85%) while 9 had radiographic changes that included bone deficit, osteolysis, or radiolucency in one or more zones. Conclusions. The early results of this modular femoral revision system are promising for the treatment of the deficient femur in complex primary and revision total hip arthroplasty. Patients with radiographic changes are advised to return for regular clinical and radiographic follow-up. Survival of the modular femoral component in this series was 100% at mean follow-up of 1.5 years and up to 3.7 years. While Harris hip clinical and pain scores were somewhat low at most recent evaluation, they were significantly improved over preoperative levels

Introduction. In the year 1977 we started to use ceramic on ceramic total hip (Ceraver*). The prosthesis was cemented on both sides. Ceramic was medical grade with relative large grains and high porosity. The stem was made of titanium alloy smooth and oxidized. In 1990 we published the results of 86 hips in 75 patients who were less than 50 years of age at time of operation (1). Recently we tried to reach the same patients, looking specifically to those who could have more than 20 or 30 years follow-up. Material and methods. This study design included all patients operated between 1977 and 1986 and having less than 50 years of age at time of surgery. Eighty six hips in 75 patients, 34 females and 41 men. Mean age was 43 (from 18 to 50) nine had a BMI in excess. 66 hips were performed primaries while 20 consisted in revision procedure including 6 total hip revisions, 5 resurfacing, 4 single cup, 3 hemiarthroplasty, and 2 acetabula fractures. Four of these had a past history of infection. Preoperative diagnosis were secondary osteoarthritis in 41, AVN in 26, primary OA in 3, Rheumatoid arthritis in 12, tuberculosis in 2 and hemophilic in two. Results. Complications: one early sepsis was cured by reoperation without material exchange, another septic case was revised at 2 years, 6 years later the results was poor and we could not trace him. One had a nonunion of the greater trochanter and one had one isolated dislocation. One presented with a fracture of an extra small ceramic head of 22 mm in diameter for high Crowe 4 DDH. The broken head was replaced by a metallic head and the socket by a polyethylene one. We tried to reach every patient and did separate them in four groups:. -. 13 hips in 12 patients that were not followed more than 2 years: they usually leaved in Africa (Algeria, Ivory Coast or Senegal and could not be traced),. -. 6 deceased from one to 28 years after index procedure, with no relation with their hip still in place. -. A group of 25 hips in 22 patients that were reached recently (some are still followed some were found by Google and reached by phone), and had not been revised. One of these had a fractured head at 21 years. -. The last group consisted in 49 hips in 48 patients who were followed for periods from 2 to 20 years. Four of these were revised always for socket loosening at period from 12 to 18 years. No reoperation for stem loosening. The revision consisted in socket exchange for a press fit material with a ceramic liner. As in our first study we identified some cases that presented with radiolucent lines at the socket side, we found no correlation between this aspects and the risk of revision. We worked more precisely on the group of 22 patients effectively followed more than 20 years, 10 more than 30 years. They had no limitation on the operated hip; some are still performing heavy activities including sports; they have no complain about noise. Slight pain was noticed in two of them. Conclusion. We found an extremely good results; no degradation of the hip clinically nor radiographic. Some radiolucent lines are still visible but not harmful. The most intriguing aspect is the total absence of osteolytic lesions. With a contemporary material implanted since 15 years we suppose to avoid some of the complications observed in this first trial group

Introduction. The cement mantle thickness for cemented stem during total hip arthroplasty (THA) is different between the complete cement mantle technique and the line-to-line technique. In the line-to-line technique, the size of the rasp is same as that of the stem. We performed THA in321 hipsof 289 patientsusing a new designed triple-tapered polished cemented stem. We investigated the short-term result of these 321 hips clinically and radiographically. Materials and Methods. From February 2002 to December 2012, 321 THAs were performed in 289 patients with the use oftriple-tapered polished cemented stem (Trilliance). Of these, 306 hips in 274 patients who were followed over 6 months, were evaluated. All THAs were undergone with direct anterior approach in supine position. The third generation cementing technique was standardized. The mean age at surgery was 65.3 years and the mean follow-up period was 24.6 months. Clinical results were evaluated by Japanese Orthopaedic Association (JOA) hip score. Intra-postoperative complications were investigated. Radiographic examinations were performed to investigate the findings of stem loosening, stress shielding, radiolucent line, osteolysis, stem subsidence, stem alignmentand cementing grade on plain radiograph. Results. The mean JOA hip score improved from 40.7 pointspreoperatively to 93.2 points at the final follow-up. As complication, 1 late onset deep infection, 2 postoperative dislocations and 1 intraoperative fracture occurred. The mean stem subsidence was 0.22mm at 6 months, 0.33mm at 1year, 0.42mm at 2 years, 0.48mm at 3 years, and 0.53mm at 4 years

INTRODUCTION. The concept of anatomical stam is fit-and-fill in the proximity of the femur and to expect wall fixation, following to reduce thigh pain and stress shielding. Although the femoral medullary form and size are different in each races. CentPillar TMZF stem (stryker . ®. ) is anatomical stem designed based on computer-tomography of Japanese femurs. The purpose of this study was to evaluate clinical and radiographic outcomes of CentPillar TMZF stem at a mean of 3.6 years postoperatively. METHODS. We asseses the results of 98 primary total hip arthroplasty (THA) performed using a CentPillar TMZF stem in 91 Japanese patients (4 males, 94 females) undergoing surgery between August 2007 and June 2011, the mean age at the time of surgery was 62.0 (41–81) years old. The Diagnosis were osteoarthritis (OA) in 91 hips, rapidly destructive coxopathy (RDC) in 4 hips, rheumatoid arthritis (RA) in 3 hips. Clinical and radiographic assessments were performed for every patient for every follow up using Japan Orthopaedic Association (JOA) Score, thigh pain, revision surgery and complications. Radiographic assessments were including stem alignment on anteroposterior radiograph, stress shielding, bone remodeling, radiolucent line, osteolysis, loosening and subsidence. RESULTS. 50.7 points of the postoperative mean JOA score was significantly improved to 96.3 points postoperatively. No patients showed thigh pain. Intraoperative calcar fracture was occurred in 1 hip. In 97 hips of 98 hips (98%) stem was implanted in neutral position (within ±3 degrees). With regard to stress shielding, 69 hips (70%) had none or only 1. st. degree resorption; 29 hips (30%) had 2. nd. degree and no cases had 3. rd. and 4. th. degree. Spot welds were developed in 71 hips (71%; Gruen zone 2 and 6), and cortical hypertrophy were observed in 2 hips (2%; Gruen zone 3 and 5). No cases developed radiolucent line, osteolysis, loosening, and subsidence. No revision surgery were requied up to 5.8 years postoperatively. DISCUSSION AND CONCLUSION. CentPillar TMZF stem provided a stable fixation, with excellent short-term clinical and radiographic outcomes. The strong proximal fixation was predictably enabled, and there were few cases fixed distal portion of the femur. These finding suggested CentPillar TMZF stem fits Japanese medullary form and can expect the long-term survival

Malorientation of the acetabular cup in Total Hip replacement (THR) may contribute to premature failure of the joint through instability (impingement, subluxation or dislocation), runaway wear in metal-metal bearings when the edge of the contact patch encroaches on the edge of the bearing surface, squeaking of ceramic-ceramic bearings and excess wear of polyethylene bearing surfaces leading to osteolysis. However as component malorientation often only occurs in functional positions it has been difficult to demonstrate and often is unremarkable on standard (usually supine) pelvic radiographs. The effects of spinal pathology as well as hip pathology can cause large rotations of the pelvis in the sagittal plane, again usually not recognized on standard pelvic views. While Posterior pelvic rotation with sitting increases the functional arc of the hip and is protective of a THR in regards to both edge loading and risk of dislocation, conversely Anterior rotation with sitting is potentially hazardous. We developed a protocol using three functional positions – standing, supine and flexed seated (posture at “seat-off” from a standard chair). Lateral radiographs were used to define the pelvic tilt in the standing and flexed seated positions. Pelvic tilt was defined as the angle between a vertical reference line and the anterior pelvic plane. Supine pelvic tilt was measured from computed tomography. Proprietary software (Optimized Ortho, Sydney) based on Rigid Body Dynamics then modelled the patients’ dynamics through their functional range producing a patient-specific simulation which also calculates the magnitude and direction of the dynamic force at the hip and traces the contact area between prosthetic head/liner onto a polar plot of the articulating surface. Given prosthesis specific information edge-loading can then be predicted based on the measured distance of the edge of the contact patch to the edge of the acetabular bearing. Results and conclusions. The position of the pelvis in the sagittal plane changes significantly between functional activities. The extent of change is specific to each patient. Spinal pathology can be an insidious “driver” of pelvic rotation, in some cases causing sagittal plane spinal imbalance or changes in orientation of previously well oriented acetabular components. Squeaking of ceramic on ceramic bearings appears to be multi factorial, usually involving some damage to the bearing but also usually occurring in the presence of anterior or posterior edge loading. Often these components will appear well oriented on standard views [Fig 1]. Runaway wear in hip resurfacing or large head metal-metal THR may be caused by poor component design or manufacture or component malorientation. Again we have seen multiple cases where no such malorientation can be seen on standard pelvic radiographs but functional studies demonstrate edge loading which is likely to be the cause of failure [Fig 2]. Clinical examples of all of these will be shown

The orthopaedist may need to act as an important adjunct to the oncologist in management of the cancer patient with hip disease. Management of the cancer patient with routine hip pathology may be relatively straightforward but the surgeon should note that the cancer patient may be on treatment protocols which affect wound healing, the immune system and the risk of DVT. The principles of managing metastatic disease include recognising the presence of lesions in bone about the hip, the occasional need for biopsy, the use of radiation in sensitive tumors and finally surgical stabilization or replacement when needed. In some cases percutaneous cementation of metastatic disease or radiofrequency ablation may be appropriate. Factors which can complicate management of patients who have completed treatment of peri-pelvic cancer, may include radiation therapy which can lead to osteonecrosis of the acetabulum. Greater than 500Cgy of radiation has been associated with high rates of acetabular fixation failure regardless of fixation type in several series. Decision making in these patients can be aided by consultation with previous radiation therapy providers to estimate the dose sustained by the local tissues under consideration. Increased rates of infection and wound healing have also been noted secondary to long term lymphatic obliteration caused by radiation. These concerns also affect the surgeon who must manage patients with acute metastatic disease where radiation and immune-compromise secondary to chemotherapy are often present

Introduction. Today, there is no clear consensus as to the amplitude of movement of the “normal hip”. Knowing the necessary joint mobility for everyday life is important to understand different pathologies and to better plan their treatments. Moreover, determining the hip range of motion (ROM) is one of the key points of its clinical examination. Unfortunately this process may lack precision because of movement of other joints around the pelvis. Our goal was to perform a preliminary study based on the coupling of MRI and optical motion capture to define precisely the necessary hip joint mobility for everyday tasks and to assess the accuracy of the hip ROM clinical exam. Methods. MRI was carried out on 4 healthy volunteers (mean age, 28 years). A morphological analysis was performed to assess any bony abnormalities. Two motion capture sessions were conducted: one aimed at recording routine activities (stand-to-sit, lie down, lace the shoes while seated, pick an object on the floor while seated or standing) known to be painful or prone to implant failures. During the second session, a hip clinical exam was performed successively by 2 orthopedists (2 and 12 years' experience), while the motion of the subjects was simultaneously recorded (Fig.1). These sequences were captured: 1) supine: maximal flexion, maximal IR/ER with hip flexed 90°, maximal abduction; 2) seated: maximal IR/ER with hip and knee flexed 90°. A hand held goniometer was used by clinicians to measure hip angles in those different positions. Hip joint kinematics was computed from the markers trajectories using a validated optimized fitting algorithm which accounted for skin motion artifacts (accuracy: translational error≍0.5 mm, rotational error <3°). The resulting computed motions were applied to patient-specific hip joint 3D models reconstructed from their MRI data (Fig. 2). Hip angles were determined at each point of the motion thanks to two bone coordinate systems (pelvis and femur). The orthopedist's results were compared. Results. All subject's hips were morphologically normal. For all movements, a minimum of 95° hip flexion was required (mean range 95°–107°), lacing the shoes and lying down being the more demanding. Abduction/adduction and IR/ER remained low (± 20°) and variable across subjects. Regarding the clinical exam, the error made by the clinicians varied in the range of ± 10°, except for the flexion and abduction where the error was higher (flexion: mean 9.5°, range −7°–22°; abduction: mean 19.5°, range: 8–32°). No significant differences between the errors made by the two examiners were noted (mean error for each examiner: 7.4° vs. 8.4°). Conclusion. Daily activities of a “normal hip” involve intensive hip flexion, which could explain why such motion can yield hip pain or possible implant failure. This information should be considered in the surgical planning and prosthesis design when restoring patient mobility and stability. The clinical exam seems to be a precise method for determining hip passive motion, if extra care is taken to stabilize the pelvis during flexion and abduction to prevent overestimation of the ROM. Further studies including more subjects are required before attesting the accuracy of this test

Background. With the rising demand for primary total hip arthroplasty (THA), there has been an emphasis on reducing the revision burden and improving patient outcomes. Although studies have shown that primary THA effectively minimizes pain and restores normal hip function for activities of daily living, many younger patients want to participate in more demanding activities after their operation. The purpose of this study was to examine the relationship between age, gender and patient satisfaction after total hip arthroplasty. Methods. With IRB approval, 2 groups of subjects were enrolled in this study: (i) 143 patients at an average of 25 months (range 10–69 months) post-primary THA, and (ii) 165 control subjects with no history of hip surgery or hip pathology. All subjects were assigned to one of four categories according to their age and gender: Group A: 40–60 year old males (31 THA; 42 Controls), Group B: 40–60 year old females (25 THA; 53 Controls), Group C: 60–80 year old males (35 THA; 25 Controls), and Group D: 60–80 year old females (36 THA; 23 Controls). Each patient completed a self-administered Hip Function Questionnaire (HFQ) which assessed each subject's satisfaction, expectations, symptoms and ability to perform a series of 94 exercise, recreational and daily living activities. These included participation in work-out activities, adventure and water sports, running and biking, and contact and team sports. Each participant was also asked their activity frequency, symptom prevalence and satisfaction with their hip in performing each activity. Results. When compared to controls, more THA patients reported at least weekly pain (20% vs. 7% p=0.001), stiffness (16% vs. 9% p=0.06), and dependence on analgesics at least weekly (8% vs. 5% p=0.42). Males age 40–60 were the only subgroup to differ significantly from their comparators in regards to pain, stiffness, or analgesic use (pain: 29% vs. 7% p=0.02; stiffness: 29% vs. 5% p=0.007; analgesics: 19% vs. 2% p=0.04). Looking at frequency of pain, more controls were dissatisfied than THA patients (64% vs 21% p=0.02). There were 12% of THA patients reporting their hip does not feel normal compared to 6% of controls (p=0.06); elderly males reported this more frequently than controls (p=0.016) and their elderly female counterparts (p=0.028). Of the effect modifiers tested, sensation of an abnormal hip (p=0.03) and frequent stiffness (p=0.003) portend lower satisfaction ratings while history of THA leads to better satisfaction rating vs. Control (p< 0.0001). Age and sex groups (p=0.33), the presence of pain (p=0.13), and analgesic use (p=0.16) were not significant modifiers. Discussion. Residual symptoms, especially stiffness, and the sensation that their hip is not normal after THA are negatively impact patient satisfaction, yet they are not uncommon in THA patients. Young THA males tend to experience more postoperative symptoms, however they remain satisfied and tolerate these symptoms well. Older THA males are less likely to report a normal feeling hip, but are generally satisfied with the outcome of THA

The orthopaedic surgeon may need to act as an important adjunct to the oncologist in management of the cancer patient with metastatic hip disease. Management of the cancer patient with routine hip pathology may be relatively straightforward but the surgeon should note that the cancer patient may be on treatment protocols which affect wound healing, the immune system and the risk of DVT. The principles of managing metastatic disease include recognising the presence of lesions in bone about the hip, the occasional need for biopsy, the use of radiation in sensitive tumors and finally surgical stabilisation or replacement when needed. In some cases percutaneous cementation of metastatic disease or radiofrequency ablation may be appropriate. Factors which may complicate management of patients who have completed treatment of peri-pelvic cancer, may include radiation therapy which can lead to osteonecrosis of the acetabulum. Greater than 500 Cgy of radiation has been associated with high rates of acetabular fixation failure regardless of fixation type in several series. Decision making in these patients can be aided by consultation with previous radiation therapy providers to estimate the dose sustained by the local tissues under consideration. Increased rates of infection and wound healing have also been noted secondary to long term lymphatic obliteration caused by radiation. These concerns also affect the surgeon who must manage patients with acute metastatic disease who may also be undergoing chemotherapy as well as radiation

INTRODUCTION:. The 3D shape of the normal proximal femur is poorly described in current designs of proximal femur prosthesis. Research has shown that in current implant designs with small diameter femoral heads the moment arm of the ilio-psoas tendon is reduced causing weakness in full extension, while large femoral heads cause psoas tendon impingement on the femoral head neck junction [1]. The femoral head-neck junction thus directly influences the hip flexor muscles' moment arm. Mathematical modeling of proximal femoral geometry allowed a novel proximal femur prosthesis to be developed that takes into account native anatomical parameters. We hypothesized that it is possible to fit a quadratic surface (e.g. sphere, cylinder…) or combinations of them on different bone surfaces with a relatively good fit. METHODS:. Forty six ‘normal’ hips with no known hip pathology were segmented from CT data. Previous research has shown the femoral head to have a spherical shape [2], the focus here was therefore mainly on the neck. The custom-written minimization algorithm, using least squares approximation methods, was used to optimize the position and characteristics of the quadratic surface so that the sum of distances between a set of points on the femoral neck and the quadratic surface was minimized. Furthermore, to improve upon current design regarding the transition between head and the neck, we recorded the position of the head neck articular margin in addition the slope of the transition from head to neck in the above 46 hips. RESULTS:. The femoral neck was found to be represented with a good fit as a quadratic surface (hyperboloid) with an average root mean square error of 1.0 ± 0.13 among 46 hips. The femoral head was spherical with a mean ratio of 22.6 ± 1.75 mm. The shape of the femoral articular margin is a reproducible sinusoidal wave form, which appears to have two facets, one anterior and the other posterior. A sigmoid curve, provided by the Logistic Function was used to switch smoothly from the spherical head function to the hyperboloid neck function (Fig. 1). This curve provides a continuous mathematical function to describe the head/neck geometry. DISCUSSION:. Traditional designs that liken the femoral head to a sphere are an oversimplification of normal hip morphology. The precise shape of the neck and the relationship of the neck to the head are the basis of this invention. The prosthesis is designed to avoid soft tissue impingement and can be optimised in shape and size to match the patient's native morphology. Neck diameter and length can be designed to achieve the optimum head-neck ratio to further improve the range of motion produced. With the current design the pain observed due to ilio-psoas impingement to implant will be reduced. Furthermore as the implant is anatomical the function of muscles and their moment arm will be unaffected

INTRODUCTION:. Previous modalities such as static x-rays, MRI scans, CT scans and fluoroscopy have been used to diagnosis both soft-tissue clinical conditions and bone abnormalities. Each of these diagnostic tools has definite strengths, but each has significant weaknesses. The objective of this study is to introduce two new diagnostic, ultrasound and sound/vibration sensing, techniques that could be utilized by orthopaedic surgeons to diagnose injuries, defects and other clinical conditions that may not be detected using the previous mentioned modalities. METHODS:. A new technique has been developed using ultrasound to create three-dimensional (3D) bones and soft-tissues at the articulating surfaces and ligaments and muscles across the articulating joints (Figure 1). Using an ultrasound scan, radio frequency (RF) data is captured and prepared for processing. A statistical signal model is then used for bone detection and bone echo selection. Noise is then removed from the signal to derive the true signal required for further analysis. This process allows for a contour to be derived for the rigid body of questions, leading to a 3D recovery of the bone. Further signal processing is conducted to recover the cartilage and other soft-tissues surrounding the region of interest. A sound sensor has also been developed that allows for the capture of raw signals separated into vibration and sound (Figure 2). A filtering process is utilized to remove the noise and then further analysis allows for the true signal to be analyzed, correlating vibrational signals and sound to specific clinical conditions. RESULTS:. Numerous tests have been conducted using this ultrasound technique to create 3D bones compared more traditional techniques, MRI and CT Scans. These tests have shown repeatedly that 3D bones can be created with an error less than 1.0 mm. Soft-tissues at the joint of question are also created with a high accuracy. Sound signals have been analyzed and correlated to specific knee and hip clinical pathology as well as complications after Total Joint Arthroplasty. Sounds such as squeaking, knocking, grinding, clicking and even a rusty door hinge have been recovered during weight-bearing activities. DISCUSSION:. Both CT scans and x-rays emit radiation, and static CT scans and MRI scans are conducted under non weight-bearing conditions. These two new orthopaedic diagnostic techniques, ultrasound and sound, allow a surgeon to make clinical diagnoses while the patient is performing weight-bearing, dynamic activities, while not being subjected to harmful radiation. Sound analyses allow for support of the ultrasound and physical exam that can lead to enhanced diagnostics that are not possible using only a visual based analysis. Early results are promising for both of these new diagnostic techniques. This study revealed that weight-bearing, dynamic diagnoses can be made by an orthopaedic surgeon and could have distinct advantages compared to traditional techniques

Introduction. Large diameter metal-on-metal hip arthroplasty (LDMMTHA) provides benefits of reduced dislocation rates and low wear. The use of modular systems allows better restoration of hip biomechanics. There have been reports of modular LDMMTHAs with tapered sleeves generating excessively high metal ions, due to possible mismatch between the titanium stem and the cobalt-chrome sleeve and the dual Morse tapers involved. We evaluated metal ion levels in LDMMTHA patients with and without a cobalt-chrome (CoCr) tapered sleeve. Methods. A cross-sectional series of 91 patients with proximal porous titanium alloy stem LDMMTHA with identical design CoCr bearings, attending a 1 to 2-year review were assessed with routine clinical and radiographic examinations, hip scores and metal ion analysis. Of these 65 had a single Morse taper between monoblock CoCr heads and the stems. Twentysix had a tapered cobalt-chrome sleeve in addition, with the resultant dual taper. Mean bearing diameter was 46 mm in both groups and mean age was 58 years in the monoblocks and 66 years in the tapered sleeve group. Results. Mean Oxford Hip score is worse in the tapered group (14.7) than in the monoblocks (12.6). All patients had well-functioning hips clinically and radiologically. Median blood cobalt and chromium are higher in the tapered sleeve (2.3μg/L and 1.8 μg/L) compared to the monoblocks (1.8 μg/L and 1.1 μg/L). Urine cobalt and chromium levels in the tapered sleeve (13.8 μg/24 hr and 5.3 μg/24 hr) also are higher than those in the monoblocks (12.2 μg/24 hr and 4.5 μg/24 hr respectively). Discussion and Conclusion. The limitation of this study is that it is a cross-sectional study. The results indicate that the use of a tapered sleeve in total hip arthroplasty does lead elevation of cobalt and chromium levels and the difference is statistically significant. However these levels are not as high as the levels reported with some other hip systems which have been withdrawn and the clinical significance of the elevated levels in the present study is unknown

[Introduction]. Total hip arthroplasty (THA) markedly improves pain, gait, and activities of daily living for most patients with osteoarthritis. However, pelvic osteotomy has been recommended for young and active patients with hip dysplasia, because THA in that population is associated with high rates of revision THA. The rotational acetabular osteotomy (RAO) of Ninomiya and Tagawa, and the eccentric rotational acetabular osteotomy of Hasegawa for hip dysplasia reportedly are successful in young and active patients. However, even after the surgery of RAO, osteoarthritis developed in some cases and leaded to the conversion to THA. The differences of bone quality of acetabulum have been reported between at the surgery of THA after RAO and at the surgery of primary THA. We should not discuss the results of these two THA equally. The purpose of this study is to report the results of THA after RAO. [Patients and Methods]. We retrospectively reviewed 33 patients (37 hips) treated by total hip arthroplasty after rotational acetabular osteotomy between 1992 and 2012. Five cases were performed RAO with valgus osteotomy. At the time of THA surgery, the overall mean age of the patients was 57.5 years (range, 39–72 years). The average of follow-up period was 7.0 years (range, 8–258 months). One surgeon (TT) evaluated the hips clinically using the Japanese Orthopaedics Association (JOA) score. The radiographic measurements were performed by the other physician (JY) blinded to the clinical scores. Radiographical examination was performed using AP X-ray. We evaluated the presence of osteolysis and loosening of the implants. We evaluated the stability of stem implants using Engh classification and of cup implants using Hodgkinson classification. [Results]. The cases of this study were converted to THA in an average 17.2 years after the surgery of RAO. JOA score was 55.7 points before THA and 86.7 points at the final follow-up. Osteolysis were found in five cases. Thirty-three cases showed good implant stability, but four cases showed fibrous union between cup and acetabulum. Three cases were converted to the revision THA due to fibrous union. All revision cases were acetabular side. [Discussion]. There were no reports about results of THA after RAO. Osteotomy should be considered for young patients because of the high rates of revision THA needed owing to prolongation of the average lifespan. McAuley et al reported the results of THA in patients 50 years and younger patients. They described the survival rates for femoral and acetabular components, using any revision as the end point, were 89% at 10-year followup and 60% at 15-year followup. Osteosclerosis of the acetabular roof bone should be careful in the case of THA after RAO. The cancellous bone could hardly be founded, even if the enough reaming was performed. Osteosclerosis may cause the difficulty in ingrowth of new bone into the implant, and lead to fibrous union between the acetabular roof bone and the implant. These two revision cases showed fibrous union before their THA. Primary fixation is very important in the case of THA after RAO. Primary fixation is very important in the case of THA after the RAO