Introduction. Intra articular distal tibia fractures can lead to post-traumatic osteoarthritis. Joint distraction has shown promise in elective cases. However, its application in acute fractures remains unexplored. This pilot study aims to fill this knowledge gap by investigating the benefits of joint distraction in acute fractures. Materials & Methods. We undertook a restrospective cohort study comprising patients with intra-articular distal tibia and pilon fractures treated with a circular ring fixator (CRF) at a single center. Prospective data collection included radiological assessments, Patient-Reported Outcome Measures (PROM), necessity for additional procedures, and Kellgren and Lawrence grade (KL) for osteoarthritis (OA). 137 patients were included in the study, 30 in the distraction group and 107 in the non-distraction group. There was no significant difference between the groups. Results. Mean follow-up was 3.73 years. There was no significant difference between the groups in overall complications or need for further procedures. There was no significant difference in progression of KL between the groups (1.81 vs 2.0, p=0.38) mean follow up 1.90 years. PROM data was available for 44 patients (6 distraction, 38 non-distraction) with a mean follow-up of 1.71 years. There was no significant difference in EQ5D (p=0.32) and C Olerud-H Molander scores (p=0.17). Conclusions. This pilot study suggests that joint distraction is safe in the acute setting. However, the study's impact is constrained by a relatively small patient cohort and a short-term follow-up period. Future investigations should prioritise longer-term follow-ups and involve a larger patient population to more comprehensively evaluate the potential benefits of joint distraction in acute fractures

Aim. Aim of this study was to establish the first clinical results after implantation of ultrathin silver-polysiloxane-coated. 1. plates in the treatment of infected non-union of the femoral shaft. Method. As part of the REFECT study, a prospective, non-interventional analysis was conducted encompassing all patients who received internal stabilization with a silver-coated. 1. plate from 01/2023 to 09/2024 as part of the treatment for infected non-union of the femur. Standardized clinical follow-ups including PROMs (WOMAC-Index, LEF-S, EQ-5D, VAS) and X-rays were performed 3, 6, 12 (and 24) months postoperatively. For comparison, a retrospective analysis of 76 patients with infected femoral non-union, who had received a stabilization with an uncoated plate in the past 10 years, was performed. Results. The mean follow-up of the 8 included patients (mean bone defect: 3.6 cm) was 9 months (as of 04/24). Multiresistant bacteria were found in the intraoperative samples of 5 patients. The concentration of silver ions in blood serum reached a maximum of 0.014 mg/l in the laboratory controls. All patients showed a positive healing process with no sign of re-infection and no adverse procedure-associated events. Full weight bearing was achieved after an average of 4 months (n=6) with improved WOMAC-, LEF-S-, EQ-5D and VAS-score at 1-year FU. In the reference group (uncoated, mean FU: 3.5 years), there was a re-infection rate of 25 %, mostly in the first 2 years. Difficult-to-treat bacteria were detected in 22%, multiresistant Staph. epidermidis in 28% of cases. Conclusions. -. The silver-coated. 1. implants showed good biocompatibility with no evidence of procedure-associated complications. -. The use of silver-coated. 1. implants could reduce the risk of re-infection. -. Further clinical data with longer follow-up are needed to assess the long-term value of the procedure

Femoral stem design affects periprosthetic bone mineral density (BMD), which may impact long term survival of cementless implants in total hip arthroplasty (THA). The aim of this study was to examine proximal femoral BMD in three morphologically different uncemented femoral stems designs to investigate whether one particular design resulted in improved preservation of BMDMethods: 119 patients were randomised to receive either a proximally coated dual taper wedge stem, a proximally coated anatomic stem or a fully coated collarless triple tapered stem. All surgeries were performed via the posterior approach with mobilization on the day of surgery. Dual energy x-ray absorptiometry scans (Lunar iDXA, GE Healthcare, Madison, WI) assessed BMD across the seven Gruen zones pre-operatively, and post-operatively at 6-weeks, 1-year, and 2-years and compared to the unoperated contralateral femur as a control. Patient reported outcome measures of pain, function and health were also included at these corresponding follow-ups. BMD increased in zones one (2.5%), two (17.1%), three (13.0%), five (10%) and six (17.9%) for all stems. Greater preservation of BMD was measured on the lateral cortex (zone 2) for both the dual taper wedge and anatomic stems (p = 0.019). The dual taper wedge stem also demonstrated preservation of BMD in the medial calcar (zone 7) whilst the anatomic and triple taper stem declined in this region, however this was not statistically significant (p = 0.059). BMD decreased on average by 2.1% inthe mid-diaphysis region, distal to the stem tip (zone 4) for all implants. All stems performed equivalently at final follow-up in all patient reported outcome measures. This study demonstrated maintenance of femoral BMD in three different cementless femoral stem designs, with all achieving excellent improvements in patient reported outcomes. There was no significant stress shielding observed, however longer follow-up is required to elucidate the impact of this finding on implant survivorship

Distal interphalangeal joint (DIPJ) fusion using a k-wire has been the gold standard treatment for DIPJ arthritis. Recent studies have shown similar patient outcomes with the headless compression screws (HCS), however there has been no cost analysis to compare the two. Therefore, this study aims to 1) review the cost of DIPJ fusion between k-wire and HCS 2) compare functional outcome and patient satisfaction between the two groups. A retrospective review was performed over a nine-year period from 2012-2021 in Counties Manukau. Cost analysis was performed between patients who underwent DIPJ fusion with either HCS or k-wire. Costs included were surgical cost, repeat operations and follow-up clinic costs. The difference in pre-operative and post-operative functional and pain scores were also compared using the patient rate wrist/hand evaluation (PRWHE). Of the 85 eligible patients, 49 underwent fusion with k-wires and 36 had HCS. The overall cost was significantly lower in the HCS group which was 6554 New Zealand Dollars (NZD), whereas this was 10408 NZD in the k-wire group (p<0.0001). The adjusted relative risk of 1.3 indicate that the cost of k-wires is 1.3 times more than HCS (P=0.0053). The patients’ post-operative PRWHE pain (−22 vs −18, p<0.0001) and functional scores (−38 vs −36, p<0.0001) improved significantly in HCS group compared to the k-wire group. Literatures have shown similar DIPJ fusion outcomes between k-wire and HCS. K-wires often need to be removed post-operatively due to the metalware irritation. This leads to more surgical procedures and clinic follow-ups, which overall increases the cost of DIPJ fusion with k-wires. DIPJ fusion with HCS is a more cost-effective with a lower surgical and follow-up costs compared to the k-wiring technique. Patients with HCS also tend to have a significant improvement in post-operative pain and functional scores

The reconstruction of peri-acetabular defects after severe bone loss or pelvic resection for tumor is among the most challenging surgical intervention. The Lumic® prosthesis (Implantcast, Buxtehude, Germany) was first introduced in 2008 in an effort to reduce the mechanical complications encountered with the classic peri-acetabular reconstruction techniques and to improve functional outcomes. Few have evaluated the results associated with the use of this recent implant. A retrospective study from five Orthopedic Oncology Canadian centers was conducted. Every patient in whom a Lumic® endoprosthesis was used for reconstruction after peri-acetabular resection or severe bone loss with a minimal follow-up of three months was included. The charts were reviewed and data concerning patients’ demographics, peri-operative characteristics and post-operative complications was collected. Surgical and functional outcomes were also assessed. Sixteen patients, 11 males and five females, were included and were followed for 28 months [3 – 60]. Mean age was 55 [17–86], and mean BMI reached 28 [19.6 – 44]. Twelve patients (75%) had a Lumic® after a resection of a primary sarcoma, two following pelvic metastasis, one for a benign tumor and one after a comminuted acetabular fracture with bone loss. Twelve patients (75%) had their surgery performed in one stage whereas four had a planned two-stage procedure. Mean surgical time was 555 minutes [173-1230] and blood loss averaged 2100 mL [500-5000]. MSTS score mean was 60.3 preoperatively [37.1 – 97] and 54.3 postoperatively [17.1-88.6]. Five patients (31.3%) had a cemented Lumic® stem. All patients got the dual mobility bearing, and 10 patients (62.5%) had the largest acetabular cup implanted (60 mm). In seven of these 10 patients the silver coated implant was used to minimize risk of infection. Five patients (31.3%) underwent capsular reconstruction using a synthetic fabric aiming to reduce the dislocation risk. Five patients had per-operative complications (31.3%), four were minor and one was serious (comminuted iliac bone fracture requiring internal fixation). Four patients dislocated within a month post-operatively and one additional patient sustained a dislocation one year post-operatively. Eight patients (50%) had a post-operative surgical site infection. All four patients who had a two-stage surgery had an infection. Ten patients (62.5%) needed a reoperation (two for fabric insertion, five for wash-outs, and three for implant exchange/removal). One patient (6.3%) had a septic loosening three years after surgery. At the time of data collection, 13 patients (81.3%) were alive with nine free of disease. Silver coating was not found to reduce infection risk (p=0.2) and capsuloplasty did not prevent dislocation (p=1). These results are comparable to the sparse data published. Lumic® endoprosthesis is therefore shown to provide good functional outcomes and low rates of loosening on short to medium term follow-up. Infection and dislocation are common complications but we were unable to show benefits of capsuloplasty and of the use of silver coated implants. Larger series and longer follow-ups are needed

The reconstruction of peri-acetabular defects after severe bone loss or pelvic resection for tumor is among the most challenging surgical intervention. The Lumic® prosthesis (Implantcast, Buxtehude, Germany) was first introduced in 2008 in an effort to reduce the mechanical complications encountered with the classic peri-acetabular reconstruction techniques and to improve functional outcomes. Few have evaluated the results associated with the use of this recent implant. A retrospective study from five Orthopedic Oncology Canadian centers was conducted. Every patient in whom a Lumic® endoprosthesis was used for reconstruction after peri-acetabular resection or severe bone loss with a minimal follow-up of three months was included. The charts were reviewed and data concerning patients’ demographics, peri-operative characteristics and post-operative complications was collected. Surgical and functional outcomes were also assessed. Sixteen patients, 11 males and five females, were included and were followed for 28 months [3 – 60]. Mean age was 55 [17-86], and mean BMI reached 28 [19.6 – 44]. Twelve patients (75%) had a Lumic® after a resection of a primary sarcoma, two following pelvic metastasis, one for a benign tumor and one after a comminuted acetabular fracture with bone loss. Twelve patients (75%) had their surgery performed in one stage whereas four had a planned two-stage procedure. Mean surgical time was 555 minutes [173-1230] and blood loss averaged 2100 mL [500-5000]. MSTS score mean was 60.3 preoperatively [37.1 – 97] and 54.3 postoperatively [17.1-88.6]. Five patients (31.3%) had a cemented Lumic® stem. All patients got the dual mobility bearing, and 10 patients (62.5%) had the largest acetabular cup implanted (60 mm). In seven of these 10 patients the silver coated implant was used to minimize risk of infection. Five patients (31.3%) underwent capsular reconstruction using a synthetic fabric aiming to reduce the dislocation risk. Five patients had per-operative complications (31.3%), four were minor and one was serious (comminuted iliac bone fracture requiring internal fixation). Four patients dislocated within a month post-operatively and one additional patient sustained a dislocation one year post-operatively. Eight patients (50%) had a post-operative surgical site infection. All four patients who had a two-stage surgery had an infection. Ten patients (62.5%) needed a reoperation (two for fabric insertion, five for wash-outs, and three for implant exchange/removal). One patient (6.3%) had a septic loosening three years after surgery. At the time of data collection, 13 patients (81.3%) were alive with nine free of disease. Silver coating was not found to reduce infection risk (p=0.2) and capsuloplasty did not prevent dislocation (p=1). These results are comparable to the sparse data published. Lumic® endoprosthesis is therefore shown to provide good functional outcomes and low rates of loosening on short to medium term follow-up. Infection and dislocation are common complications but we were unable to show benefits of capsuloplasty and of the use of silver coated implants. Larger series and longer follow-ups are needed

Introduction. Reverse total shoulder arthroplasty (RTSA) is rapidly being adopted as the standard procedure for a growing number of shoulder arthropathies. Though short-term outcomes are promising, mid- and long-term follow-ups present a number of complications – among them, humeral stem and glenosphere component loosening. Though not the primary complication, previously reported aseptic loosening required revision in 100% of cases. As the number of patients undergoing RTSA increases, especially in the younger population, it is important for surgeons to identify and utilize prostheses with stable long-term fixation. It has previously been shown in the hip and knee literature that implant migration in the first two years following surgery is predictive of later failure due to loosening in the 5=10-year postoperative window. The purpose of this study is to, for the first time, evaluate the pattern and total magnitude of implant migration in reverse shoulder arthroplasty using the gold standard imaging technique radiostereometric analysis (RSA). Methods. Forty patients were prospectively randomized to receive either a cemented or press-fit humeral stem, and a glenosphere secured to the glenoid with either autologous bone graft or 3D printed porous titanium for primary reverse total shoulder arthroplasty. Following surgery, participants are imaged using RSA, a calibrated, stereo x-ray technique. Radiographs are acquired at 6 weeks (baseline), 3 months, 6 months, 1 year, and 2 years. Migration of the humeral stem and glenosphere at each time point is compared to baseline. Migration of the prostheses is independently compared between humeral stem fixation groups and glenosphere fixation groups using a two-way repeated measures ANOVA with Tukey's test for multiple comparisons. Results. Follow-ups are ongoing and preliminary results are presented. Significant differences were observed at the 6-month and 1-year time points for superior-inferior translation (p = 0.0067, p = 0.0048), and total three-dimensional translation (p = 0.0011, p = 0.0272) between humeral stems, with press-fit humeral stems subsiding significantly more than cemented stems. Migration between the 6-month and 1-year time points was minimal for both stem fixation groups (less than 0.2 mm). No significant differences were observed along any axis at any time point for the glenosphere fixation groups. Conclusion. There is a trend towards increased subsidence with the use of press-fit stems compared to cemented stems in the first six months postoperatively, as is expected. Both implant fixation techniques demonstrate stability from six months through one year, and this trend is expected through two-year follow-up. Similarly, both glenosphere fixation techniques demonstrate immediate and stable fixation through one year

Objective. Wearable sensors have enabled objective functional data collection from patients before total knee replacement (TKR) and at clinical follow-ups post-surgery whereas traditional evaluation has solely relied on self-reported subjective measures. The timed-up-and-go (TUG) test has been used to evaluate function but is commonly measured using only total completion time, which does not assess joint function or test completion strategy. The current work employs machine learning techniques to distinguish patient groups based on derived functional metrics from the TUG test and expose clinically important functional parameters that are predictive of patient recovery. Methods. Patients scheduled for TKR (n=70) were recruited and instrumented with a wearable sensor system while performing three TUG test trials. Remaining study patients (n=68) also completed three TUG trials at their 2, 6, and 13-week follow-ups. Many patients (n=36) have also participated up to their 26-week appointment. Custom developed software was used to segment recorded tests into sub-activities and extract 54 functional metrics to evaluate op/non-operative knee function. All preoperative TUG samples and their standardized metrics were clustered into two unlabelled groups using the k-means algorithm. Both groups were tracked forward to see how their early functional parameters translated to functional improvement at their three-month assessment. Test total completion time was used to estimate overall functional improvement and to relate findings to existing literature. Patients that completed their 26-week tests were tracked further to their most recent timepoint. Results. Preoperative clustering separated two groups with different test completion times (n=46 vs. n=22 with mean times of 13s vs. 22s). Of the faster preoperative group, 63% of patients maintained their time, 26% improved, and 11% worsened whereas of the slower preoperative group, 27% maintained, 64% improved, and 9% worsened. The high improvement group improved their times by 4.9s (p<0.01) between preoperative and 13-week visits whereas the other group had no significant change. Test times were different between both groups preoperatively (p<0.001) and at 6 (p=0.01) and 13 (p=0.03) weeks but not at 26 weeks (p=0.67). The high improvement group reached an overall improvement of 9s (p<0.01) at 26 weeks whereas the low improvement group still showed no improvement greater than the TUG minimal detectable change of 2.2s (1.8s, p<0.01)[1]. Test sub-activity times for both groups at each timepoint can be seen in Figure 1. Conclusions. This work has demonstrated that machine learning has the potential to find patterns in preoperative functional parameters that can predict functional improvement after surgery. While useful for assigning labels to the distinguished clusters, test completion time was not among the top distinguishable metrics between groups at three months which highlights the necessity for these more descriptive performance metrics when analyzing patient recovery. It is expected that these early predictions will be used to realistically adjust patient expectations or highlight opportunities for physiotherapeutic intervention to improve future outcomes. For any figures or tables, please contact the authors directly

Purpose:. We compared patients, (group A) who had severe varus deformity with posterolateral varus thrust, with patients,(group B) who didn't have varus thrust for results of total knee arthroplasty. Materials and Methods:. The average follow-up period was 33 months in group A (25 cases out of 23 patients) and 67 months in group B (50 cases out of 50 patients). We evaluated which kind of implant the patient had, the thickness of the polyethylene and changes of joint levels. Also we measured preoperative and postoperative mechanical axis deviation, tibio-femoral angle, and implant positions. Clinical results included preoperative and postoperative HSS, KSS, range of motion, and remained posterolateral instability on final follow-ups (Fig 1, Fig 2). Results:. The used implants in group A were 11 cases of Lospa®(Corentec), 10 cases of Scorpio NRG®(Stryker), 2 cases of LPS Flex®(CCK, Zimmer). The used implants in group B were 15 cases of Lospa®(Corentec). 20 cases of Scorpio NRG®(Stryker), 15 cases of LPS Flex®(Zimmer). Linked constrained prosthesis of RHK (Zimmer) was not used in any cases. The changes of mechanical axis deviations in groups A and B were respectively from preoperative average varus 66.5 mm, 32.6 mm to average varus 1.09 mm (p = 0.01), 1.8 mm (p = 0.021) in final follow-ups. Group A and Group B were corrected with statistical significance, but didn't show statistical significance between groups (p = 0.058). The changes of tibio-femoral angles were respectively from preoperative average varus 14.9°, 5.4° to average valgus 6.8°(p = 0.01), 7.6°(p = 0.013) in last follow-ups, but didn't show statistical significance between groups (p = 0.058). Preoperative stress varus angles were corrected respectively from average 18.0°, 6.2° to average 3.1°(p = 0.012), 2.3°(p = 0.064) and preoperative stress valgus angles were corrected respectively from average 9.2°, 3.0° to average 3.0°(p = 0.043), 1.9°(p = 0.068), but didn't show statistical significance in change of varus angle (p = 0.071) and in change of valgus angle (p = 0.063). Any remained posterolateral instability was not demonstrated in final follow-ups. Joint level changes in A and B were respectively from mean 13.6 mm, 12.8 mm to 18.5 mm, 17.2 mm, but didn't show statistical significance between groups (p = 0.059)(Fig 3). Postoperative implant position (α,β,γ,δ angles) was 94.6/90.3/89.7/3.86 in group A and 94.0/91.0/89.0/4.1 in group B, but didn't show statistical significance between groups (p = 0.058 in α, p = 0.061 in β, p = 0.064 in γ, p = 0.068 in γ). HSS (Hospital for Special Surgery) score improved from 47 point to 85 point (p = 0.021) in group A and from 51 point to 89 point (p = 0.032) in group B, but didn't show statistical significance between group (p = 0.061). KSS (Knee Society Scale) score was improved from 45.7 pointê. 3. ¼ to 86.2 point (p = 0.011) in group A and form 52.3 point to 88.4 point (p = 0.013), but didn't show statistical significance between group (p = 0.056). Conclusion:. Advanced osteoarthritis induced severe varus deformity with varus thrust could be effectively treated through total knee arthroplasty. But we should make a careful observation for attenuation of the lateral ligament structures in ahead. Key words: lateral ligament structures, osteoarthritis, posterolateral instability, total knee arthroplasty

Tears of the rotator cuff tendons are a very common entity. Despite recent advances in arthroscopic rotator cuff repair, the re-tear rate remains high. Thus, new methods to improve healing rates following rotator cuff repair must be sought. The purpose of this prospective randomized double-blind controlled study is to compare the functional outcomes and healing rates of an adjuvant pre-operative bone microfracture technique prior to arthroscopic cuff repair. Patients undergoing arthroscopic rotator cuff repair were randomized to receive either a percutaneous bone microfracture of the supraspinatus footprint or a “soft tissue needling” technique, in which the pin was passed through the peripheral edges of the rotator cuff, five-seven days prior to index surgery, under ultrasound guidance. Follow-ups were completed at 3, 6, 12 and 24 months post-operatively. Healing status was determined by ultrasound at 6 and 24 months. The primary objective was to compare the WORC score at 24 months. Secondary objectives included the healing status via ultrasound, the Constant, and the ASES scores. A sample size calculation determined that 90 patients provided 80% power to detect a statistical difference between groups. Baseline demographic data did not differ between groups. No statistical differences were detected in the WORC outcome at any time points (p=0.47, baseline, p=0.60, 3 months, p=0.79, 6 months, p=0.50, 12 months, p=0.54, 24 months). Healing rates did not differ between groups (P=0.34) and no differences were observed in the ASES or Constant Scores at all time-points. Statistically significant improvements occurred in both groups from baseline to all time points in all clinical outcome scores (p < 0 .0001). No statistically significant differences in primary or secondary outcomes were identified between pre-operative bone microfracture and soft tissue needling techniques prior to arthroscopic rotator cuff repair. This study does not support pre-operative microfracture as a adjuvant technique prior to arthroscopic cuff repair

PURPOSE. Recently, in tissue engineering several methods using stem cells have been developed to repair chondral and osteochondral defects. Most of these methods rely on the use of scaffolds. Studies in the literature have demonstrated, first in animals and then in humans, that the use of mesenchymal stem cells withdrawn by several methods from adipose tissue allows to regenerate hyaline articular cartilage. In fact, it has been cleared that adipose-derived cells have multipotentiality equivalent to bone marrow-derived stem cells and that they can very easily and very quickly be isolated in large amounts enabling their immediate use in operating room for one-step cartilage repair techniques. The purpose of this study is to evaluate the therapeutic effect of adipose-derived stem cells on cartilage repair and present our experience in the treatment of knee cartilage defects by the novel AMIC REPAIR TECHNIQUE AUGMENTED by immersing the collagen scaffold with mesenchymal stem cells withdrawn from adipose tissue of the abdomen. MATERIALS AND METHODS. Fat tissue processing involves mechanical forces and does not mandatorily require any enzymatic or chemical treatment in order to obtain the regenerative cells from the lipoaspirate. In our study, mesenchymal adipose stem cells were obtained by non-enzymatic filtration or microfragmentation of lipoaspirates of the abdomen adipose tissue that enabled the separation of the stromal vascular fraction and were used in one-step reconstruction of knee cartilage defects by means of this new AUGMENTED AMIC TECHNIQUE. The focal defects underwent bone marrow stimulation microfractures, followed by coverage with collagen double layer resorbable membrane (Chondro-gide. TM. -Geistlich Pharma AG, Wolhusen, Switzerland) soaked in the cells obtained from fat in 18 patients, aged between 31 and 58 years, at the level of the left knee in 10 cases and in the right in eight, with follow-up ranging between 12 and 36 months. RESULTS: Surgical procedures have been completed without technical problems neither intraoperative or early postoperative complications. The evaluation scores (IKDC, KOOS and VAS) showed a significant improvement, more than 30%, at the initial 6 months follow-up and furtherly improved in the subsequent follow-ups. Also the control MRIs showed a progressive filling and maturation of the repair tissue of the defects. CONCLUSIONS. Since we are reporting a short and medium-term experience, it is not, of course, possible to provide conclusive assessment considerations on this technique, as the experience has to mature along with the progression of follow-ups. The simplicity together with the absence of intraoperative difficulties or immediate complications and the experience gained by other authors, first in animals and then in early clinical cases, makes it, however, possible to say that this can be considered one of the techniques to which resort for one-step treatment of cartilage defects in the knee because it improves patient's conditions and has the potential to regenerate hyaline-like cartilage. Future follow-up works will confirm the results

Objective. Patient-specific instrumentation (PSI) is a novel technique in total knee arthroplasty (TKA) which potentially permits more accurate alignment of the components; however, there is no consensus in literature regarding the accuracy and reliability of PSI as many studies have shown controversial and inconsistent results of various PSI systems. A 24-month follow-up study was carried out to compare perioperative clinical outcomes, radiological limb alignment and component positioning, as well as functional outcomes following TKA between PSI and conventional instrumentation (CI). Methods. During September 2011 and August 2012, 90 consecutive patients were scheduled to undergo unilateral TKA with either PSI or CI. TruMatch® Personalised Solutions was used in this study, and a senior surgeon performed all operations. Patients were clinically assessed before, 6-month and 24-month after surgery. Results. There were 42 patients who underwent TKA with PSI and 48 patients with CI, with no preoperative demographic and clinical difference. There was significant improvement in maximal extension for both groups at both of the two follow-ups, compared to baseline. While the CI group maintained similar maximal flexion angle, PSI group had significant decrease in maximal flexion angle, at both follow-ups. Overall, there was no significant improvement in the range of motion for both groups over the 24-month period after surgery. At 6 and 24 months postoperatively, there were similarly significant improvements in the mean scores of Oxford Knee Score, Knee Society Score, and Physical Component Sscore of the SF-36 Health Survey for both groups. At 24 months postoperatively, no significant differences were detected between PSI and CI groups in all clinical and functional outcomes. Radiographic results showed that the lower limb mechanical alignment and coronal component positioning were satisfactory and similar between the two groups. There were no differences in operating time, haemoglobin loss, transfusion rate and length of hospitalisation between PSI and CI, perioperatively. Conclusion. In conclusion, CT-based PSI showed comparable clinical and functional outcomes at 24 months after TKA compared with CI. There were no significant differences between the two types of instruments in achieving alignment restoration, component positioning, and perioperative clinical outcomes in terms of operating time and blood loss

Articulation of the polyethylene (PE) insert between the metal femoral and tibial components in total knee replacements (TKR) results in wear of the insert which can necessitate revision surgery. Continuous PE advancements have improved wear resistance and durability increasing implant longevity. Keeping up with these material advancements, this study utilises model-based radiostereometric analysis (mbRSA) as a tool to measure in vivo short-term linear PE wear to thus predict long-term wear of the insert. Radiographic data was collected from the QEII Health Sciences Centre in Halifax, NS. Data consisted of follow-up RSA examinations at post-operative, six-, 12-, and 24-month time periods for 72 patients who received a TKR. Implanted in all patients were Stryker Triathlon TKRs with a fixed, conventional PE bearing of either a cruciate retaining or posterior stabilised design. Computer-aided design (CAD) implant models were either provided by the manufacturer or obtained from 3D scanned retrieved implants. Tibial and femoral CAD models were used in mbRSA to capture pose data in the form of Cartesian coordinates at all follow-ups for each patient. Coordinate data was manually entered into a 3D modeling software (Geomagic Studio) to position the implant components in virtual space as presented in the RSA examinations. PE wear was measured over successive follow-ups as the linear change in joint space, defined as the shortest distance between the tibial baseplate and femoral component, independently for medial and lateral sides. A linear best-fit was applied to each patient's wear data; the slope of this line determined the annual wear rate per individual patient. Wear rates were averaged to provide a mean rate of in vivo wear for the Triathlon PE bearing. Mean linear wear per annum across all 72 patients was 0.088mm/yr (SD: 0.271 mm/yr) for the medial condyle and 0.032 mm/yr (SD: 0.230 mm/yr) for the lateral condyle. Cumulative linear wear at the 2-year follow-up interval was 0.207mm (SD: 0.565mm) and 0.068mm (SD: 0.484mm) for the medial and lateral condyles, respectively. Linear PE wear measurements using mbRSA and Geomagic Studio resulted in 0.056mm/yr additional wear on the medial condyle than the lateral condyle. Large standard deviations for yearly wear rates and cumulative measurements demonstrate this method does not yet exhibit the accuracy needed to provide short-term in vivo wear measurement. Inter-patient variability from RSA examinations is likely a source of error when dealing with such small units of measure. Further analysis on patient age and body mass index may eliminate some variability in the data to improve accuracy. Despite high standard deviations, the results from this research are in proximity to previously reported linear wear measurements 0.052mm/yr and 0.054mm/yr. Linear wear analysis will continue upon completion of >100 patients, in addition to volumetric PE wear over the entire articulating surface

Aim. In surgeries on patients with advanced ligament instabilities or severe bone defects modern-generation of rotating hinged knee prostheses are one of the main options. The objective of our study is to evaluate the mid-term functional results and complications of several surgeries using this form of prosthesis. Material and Method. The rotating hinged knee prosthesis (RHKP) was applied to 208 knees of 204 patients in primary surgeries between September 2009 and December 2017, the minimum followup was 15 months (mean, 65 months; range, 15–115 months). Of the total number of female patients there were 152 (74.5%), men − 52 (25.5%). The average age of the patients was 64,6 years (from 32 to 85). The main indications for using RHKP were severe varus deformity with flexion contracture in 107 knees (51,4%), severe valgus deformity (from 20 to 50 degrees) in 54 knees (26,0 %), severe ligamentous deficiencies in 24 knees (11,5%) and ankylosis in the flexion position in 23 cases (11,1%). Patients were evaluated clinically (Knee Society score) and radiographically (positions of components, signs of loosening, bone loss). Results. The average Knee Society Knee Scores, and Knee Society Functional Scores were 27, and 18, respectively, before the surgery; and 86, and 77 in the final post-surgery follow-ups. In addition, the average range of motion increased from the pre-operative level of 46 to 104 degrees at the final evaluation. Four patients (2%) had various complications after the surgery : two patients had deep infection, in one case took place fracture of the hinge mechanism and in one - post-operative rupture of the patellar tendon. Conclusions. Primary knee arthroplasty using RKHP can be successful in cases with advanced ligament instability or severe bone defects. Modern-generation of the kinematic rotating-hinge total knee prostheses allow to achieve in difficult primary cases the same consistently good results as commonly used constructions in standard situations

Introduction. Total hip arthroplasty (THA) is a highly successful procedure achieving excellent clinical outcomes beyond 10 years post-surgery. With exception of periprosthetic infection, dislocation is the most common cause of failure in THA. A novel reverse total hip (RTH) replacement has been developed to address dislocation through reversal of the typical THA articulation in which a femoral cup and acetabular ball interlock at the extremes of motion to enhance mechanical stability in all planes. The purpose of this study was to assess the safety and efficacy of this novel RTH in a series of 22 patients and to monitor implant fixation using radiostereometric analysis (RSA). Methods. Twenty two patients with end-stage osteoarthritis of the hip were enrolled between 2017 and 2019 at a single center. All surgeries were performed by a group of four high-volume fellowship-trained arthroplasty surgeons. All patients received at least 1 acetabular cup screw and RSA markers inserted into the acetabulum and proximal femur. Follow-up time points were 6 weeks, 6, 12 and 24 months and included patient reported outcome measures (HOOS, Oxford-12, Harris Hip Score, SF-36 and Satisfaction) as well as RSA assessment. Results. The patient cohort consisted of 11 females and 11 males with mean age of 70.8 years and body mass index 31.3 kg/m. 2. At the time of writing, 21, 15 and 3 patients had completed their 6-month, 1- and 2-year clinical follow-ups, respectively. There was a significant improvement in function and pain with the RTH between pre-operative and six and twelve month follow up as collected by the HOOS, Oxfrod-12, HHS, WOMAC, EQ-5D and SF-36 PCS with p<0.001 for all. The sole exception was the SF-36 MCS which had a non-statistical improvement. Eighteen of 20 patients were satisfied or very satisfied with the outcome of surgery. Average vertical migration of the acetabular cup at 6 and 12 months was 0.082 mm and 0.110 mm, respectively. Average distal migration of the femoral stem at 6 and 12 months was 0.015 mm and 0.035 mm, respectively. Conclusions. Early results indicate acceptable safety and efficacy of this novel RTH for treating osteoarthritis of the hip. The femoral and acetabular components both appear well fixed at near-term follow-up, as assessed with RSA. Further follow-up will determine if these results are maintained at 24 months post-surgery. Additional patient enrollment will assess acetabular cup fixation without the use of screws. For any figures or tables, please contact authors directly

Background:. Different surgical approaches have been proposed for the treatment of chondral lesions. However surgical management of osteochondral defects of the knee joint involving subchondral bone are still under debate. Purpose:. The aim of this prospective non-randomized uncontrolled clinical investigation is to confirm the effectiveness of a commercially available biomimetic osteochondral scaffold in regenerating cartilage and subchondral bone of severe osteochondral lesions of the knee joint with one step surgery. Methods:. The biomimetic scaffold has a multilayer structure consisting of a combination of type I collagen and type I collagen/hydroxyapatite, mimicking the osteochondral connective tissue of the knee joint. From 2009 to 2011, sixty-one patients affected by grade III or IV osteochondral lesions of the knee, according to Outerbridge Classification, were admitted to three centers and received the biomimetic scaffold. Four-nine patients were evaluated using the International Knee Documentation Committee (IKDC), Tegner and VAS scores, and MRI at 1-, 2- and 3-year follow-ups. Biopsies were carried out in 5 patients at an average time of 19.2 months to histologically evaluate the quality of the newly-formed tissue. Results:. All patients tolerated the surgery well; no major adverse events were observed in the early postoperative period. Clinical evaluation of the 49 patients showed a statistically significant improvement in all scores at 1- 2- and 3-year follow-ups as compared to preoperative baseline scores. Improvement in the scores and functional recovery seemed to reach a plateau after 2 years; no significant improvement was seen between the 2- and the 3-year follow-up. Conclusions:. A synthetic biomimetic scaffold used in one-step surgery for the treatment of severe osteochondral knee lesions significantly improved symptoms and joint function, as demonstrated by subjective and objective scoring system evaluation. Furthermore, the athletic subpopulation exhibited a significantly better outcome than the non-athletic subpopulation

Background. There have been limited published reports on the clinical results of cervical artificial disc replacement. Goffin et al reported a 90% rate of good to excellent results at 1 to 2 yrs after Bryan disc replacement. Wigfield et al reported a 46% improvement in pain and 31% improvement in disability 2 yrs after Prestige cervical disc replacement. Objectives. The study was designed to determine whether new functional cervical disc prosthesis can provide improvement in the ability to perform activities of daily living, decrease pain and segmental motion. Methods. All patients who had Prestige cervical disc replacement over last 2yrs 3 months were identified. Oswestry disability index score and SF36 Quality of life instrument were administered to each patient. Site specific pain scores were obtained using visual analogue scale. Clinical and operative details were reviewed and correlated. Results. 35 Patients underwent 48 Prestige cervical disc replacement during study period. There was 48%, 54% and 70% improvement in Oswestry disability index at 6 weeks, 6 months and 19 months follow-ups respectively. There was significant improvements in both neck and arm pain during immediate post op period and during further follow-ups. There was one neck wound haematoma and one left sided Horner's syndrome as complications. Conclusion. Anterior cervical disc replacement is a viable surgical alternative to fusion for cervical disc degenerative disease and herniation with preservation of motion and alignment without compromising clinical outcomes. At least 5yrs follow-up will be needed to assess the long term functionality of the prosthesis and protective influence on the adjacent levels

Tibial shaft fractures co-existing with osteoarthritis can increase the challenges for the orthopedic surgeon. The novel Londhe-Shah technique manages both the problems using one-stage total knee arthroplasty with a long stemmed tibial component which has a good diaphyseal fit. Three osteoarthritis patients with fractures of tibial shaft were treated with this technique and were followed up at 6-weeks, 12-weeks and 1-year (figure 1–3). A complete union of the fractured segment was achieved at follow-up without any adverse events such as infection, damage to the implant, and soft-tissue injury during and after surgery. The American Knee Society Score (AKSS) improved and WOMAC pain and stiffness scores reduced at follow-ups suggesting excellent improvement in functionality and patient satisfaction. One-stage TKR with a long-stem extension of the tibial component to bypass the fracture site mends and stabilises the fracture along with the adverse biomechanics at the fracture site while also correcting the arthritis. The single stage procedure allows early ambulation in six weeks. For any figures or tables, please contact the authors directly

Purpose. To observe the follow-up results of standard cemented bipolar hemiarthroplasty with double loop and tension band wiring technique for treatment of unstable intertrochanteric hip fractures in elderly patients with osteoporosis. Materials and Methods. From May 2000 to May 2006, 86 cemented bipolar hemiarthroplasties were performed in elderly patients who had unstable intertrochanteric fractures. The mean age at the time of surgery was 82 years old. The average follow-up period were 5.3 years. We evaluated post-operative results after operation by clinical and radiographic methods. Results. Clinically, the final follow-up of Harrsi hip score was noted 79.2. The mean time needed for full weight bearing following surgery was 4.2 weeks and 82.5% of patients regained their preoperative ambulatory level. All patients achieved union in lesser trochanter fracuture, but great trochanter displacement were observed in 4 cases. There was one case of acetabular erosion. Post-operative superficial infections were found in 2 cases. 1 case with stem subsidence(<5 mm) showed satisfactory results without further subsidence in follow-ups. Conclusion. If we properly apply indications in technique with cemented bipolar hemiarthroplasty in the treatment of unstable intertrochanteric hip fracture in elderly, we will achieve systematic postoperative rehabilitation, pain control and handy nursing which is its one of merits

Background. A first generation once annealed highly crosslinked polyethylene (HXLPE) was introduced in 1998. At 8 years it was reported to have a 78% reduction in wear compared with conventional polyethylene and no osteolysis. However, concerns regarding the long-term performance and oxidative resistance of this annealed material exist because of the presence of free radicals. Questions/purposes. We therefore addressed the following questions: (1) Does the improvement in wear observed at earlier follow-up continue out to 15 years? (2) What is the incidence of osteolysis in this group of patients?. Methods. We retrospectively reviewed 48 prospectively followed patients who had 50 hips with a once annealed HXLPE and were followed an average of 12 years (15 years maximum). Linear head penetration and cup position were measured from AP radiographs at early, 1-year, 5-year, and most recent follow-ups. There were 26 females, 22 males, with an average age of 61 years. Results. At average 12 years follow-up, annual linear wear was 0.018 mm (SD = 0.024). Average cup inclination was 50.2 degrees (SD = 5.1 range 48 to 64) and anteversion was 18.6 (SD = 8.3, range 3 to 35). No mechanical failure or osteolysis has been found on routine x-rays to date. Conclusions. At 8 year follow this once annealed material had a reported linear wear rate of 0.031mm /year. We now report, at a 12 years average 15 years maximum follow-up, a further reduction in linear wear of 0.018mm/yr. and no mechanical failures or osteolysis (Figure-1)