Introduction: Ankle fractures are the most common fracture presenting to any trauma unit in the country with an incidence of 100 per 100,000 in a population. The management and the outcome will very well depend on the mechanism of the injury but there is a window of opportunity of atleast 24hr before the swelling sets in making it technically difficult to operate and hence lengthening the hospital stay with a substantial financial cost. In times where the public health fundings are set to be rolled back and Department of Health been asked to contribute £2.3bn to the Treasury’s £5bn of public spending cuts in2010/1, health economics becomes a vital thread in consideration of treatment planning. Aim: The study was aimed at determining the delay in definitive fixation of the ankle fractures from the time of presentation to the hospital and the reasons entailing the delay with a resultant economic negative resonance of it on the hospital budget spreadsheets and for the patient. Method: A retrospective review of all ankle fracture patients operated during Sept 07 to Aug 08 in this hospital was performed. Electronic records were evaluated to identify the waiting times for the surgery and the reasons thereof. Calculations were performed based upon the days lost and calculated against the national minimum wage of £5.73 an hour for adults (workers aged 22 and over) and £4.77 an hour for workers aged 18 to 21 inclusive (often known as the developmental rate). Cost to the trust because of the extra stay was calculated as well. Results: Total number of patients operated for ankle fracture during the study period was 159. The mean waiting time for surgery was 4.9 days (range 1 to 7.8 days). The mean duration of in-hospital stay for the procedure was 12 days. The commonest cause for the delay of surgery was soft tissue swelling (50%). The total number of patient days lost while waiting for selling to recede was 779.1. Based on the minimum wages considering 8 hours of a working day, the total economic loss to the GDP was approximately £35713.9. With the average cost of hospital stay per day being £ 365 patient the total expenditure to the trust for waiting for the ankle selling to recede was 1788 per patient. Conclusion: Considering the current economic climate, which is set to affect the spending on the health care, its over time that economic consideration is given while considering the promptness of the action with NCEPOD also suggesting that operatic can be done at night if resources available. With European working time directive in play from august 2009 and open reduction and internal fixation considered a index operation it is possible to operate timely by a fresh surgical team

Chronic osteomyelitis is a challenging problem and a growing burden for the National Health Service. Conventional method of treatment is 2 stage surgery, with debridement and prolonged courses of antibiotics. Recently single stage treatment of chronic osteomyelitis is gaining popularity due decreased patient morbidity and cost effectiveness. Dead space management in single stage treatment is accomplished by either a muscle / myocutaneous or antibiotic loaded calcium sulphate beads. We analysed the cost effectiveness of two dead space management strategies in single stage treatment of osteomyelitis. Study is designed to analyse the health economics at 2 time points; 45 days post surgery and 2 years post surgery. We report preliminary results at 45 days post surgery. Setting – Level 1 trauma centre and university hospital. Approval – Ethics committee approved study. 10 patients in each group were retrospectively analysed through patient records. Each group was identified for standard demographics, duration of procedure, hospital stay, type and duration of postoperative antibiotics, number of out patient visits in first 45 days and recurrence of infection. Table attached details the results of both groups. In health technology assessment four quadrant model, CSB appears in quadrant II suggesting that it is more cost effective. Based on small data set and on assessment only evaluating cost, at 45 days assessment, antibiotic calcium sulphate beads from a Health Economic Cost Effectiveness Analysis offers a better economic outcome. This is holding constant the morbidity of the patients and effectiveness, assuming both treatments are standards of care, which is best evaluated at 24 months. Acknowledgements. Biocomposites for funding the cost of health economist

It is becoming widely accepted that research which considers only the outcome and not the costs associated with new technologies in health care, is of limited value in making decisions about the use of scarce resources. Economic evaluation is becoming a standard feature of clinical research but many published economic evaluations fall short of best practice in their methodology. We have described the essential features of economic evaluation, using published studies in orthopaedics, in order to try to improve the ability of orthopaedic surgeons to read, understand and appraise such studies critically, and to encourage them to consider including economic evaluation in future investigations.

The rate of peri-prosthetic infection following total joint replacement continues to rise, and attempts to curb this trend have included the use of antibiotic-loaded bone cement at the time of primary surgery. We have investigated the clinical- and cost-effectiveness of the use of antibiotic-loaded cement for primary total knee replacement (TKR) by comparing the rate of infection in 3048 TKRs performed without loaded cement over a three-year period versus the incidence of infection after 4830 TKRs performed with tobramycin-loaded cement over a later period of time of a similar duration. In order to adjust for confounding factors, the rate of infection in 3347 and 4702 uncemented total hip replacements (THR) performed during the same time periods, respectively, was also examined. There were no significant differences in the characteristics of the patients in the different cohorts.

The absolute rate of infection increased when antibiotic-loaded cement was used in TKR. However, this rate of increase was less than the rate of increase in infection following uncemented THR during the same period. If the rise in the rate of infection observed in THR were extrapolated to the TKR cohort, 18 additional cases of infection would have been expected to occur in the cohort receiving antibiotic-loaded cement, compared with the number observed. Depending on the type of antibiotic-loaded cement that is used, its cost in all primary TKRs ranges between USD $2112.72 and USD $112 606.67 per case of infection that is prevented.

Cite this article: Bone Joint J 2014;96-B:65–9.

Aims

The primary aim is to estimate the current and potential number of patients on NHS England orthopaedic elective waiting lists by November 2020. The secondary aims are to model recovery strategies; review the deficit of hip and knee arthroplasty from National Joint Registry (NJR) data; and assess the cost of returning to pre-COVID-19 waiting list numbers.

Between 1998 and 2007, fifteen patients with haemophilia A underwent 21 ankle arthrosco-pies+/− arthroscopic cheilectomy in order to attempt symptomatic relief of arthrosis and to increase the range of motion. All patients had severe degenerative changes radiologically.

Perioperative management was shared with our local dedicated Haemophilia service and the management algorithm will be presented.

Outcome data for pain and range of motion shows only moderate benefits.

Two patients had good relief of symptoms for 6 months. Two patients however chose to return for arthroscopies to the contralateral ankle and two had arthoscopies to the same ankle.

Follow up data is not currently available for 4 patients and the rest required fusion with a median time to fusion of 1 year.

Two patients had a documented increased range of motion, but one of these patients had an increased level of pain associated with the increased mobility.

There was 1 major complication, namely an aneurysm of the tibialis anterior artery.

Two patients had recurrent bleeds following surgery requiring ongoing and prolonged factor VIII treatment.

Average patient stay was 3.1 days, range 2 to 5 days and this stay is shorter for later years than earlier years.

The post-operative requirement for extra factor VIII ranged from 4 postoperative doses to 3 weeks ongoing treatment, median 10 doses. The average cost per dose was approximately £1128, giving a median cost of £11280 per case.

In summary, this procedure seems to be expensive in terms of QALY gains and has low rates of success in terms of function and pain relief.

Introduction: The first line treatment in our centre for Morton’s neuroma (MN), sufficient to warrant intervention, is a peri-neural Ultrasound guided injection of corticosteroid (USI).

The NHS will soon implement 18 week referral to treatment targets.

A prospective study was performed whereby from 2004–6, referral letters from General Practitioners suggesting a diagnosis specifically of Morton’s neuroma, resulted in randomised assignment to either direct referral for USI or to the specialist Foot and Ankle outpatient clinic.

Patients with less specific referral letters were evaluated in clinic and referred for USI as appropriate.

A comparison was made of the sensitivity and specificity of the referral pathways, financial implications and the time to treatment (TTT).

Results: 121 patients were referred for USI.

Of 57 patients for whom the GP had diagnosed a MN, 40 (70%) had the diagnosis confirmed on USI (other diagnoses were: 7 NAD, 3 ganglions, 2 bursae, 2 degenerative change, 1 glomus tumour, 1 angioleiomyoma, 1 SOL); this was comparable to the overall number referred to radiology with a suspected MN (69%).

In the directly referred group, the mean TTT was 115 days (95%CI = 89 – 141), compared to 241 days (95%CI = 223 – 259) for those patients who went via a Foot and Ankle clinic. P< 0.0001.

Conclusion: For patients with features highly suggestive of a Morton’s neuroma, direct referral from primary care for USI has a similar sensitivity and specificity to referral from a specialist hospital clinic and the TTT is significantly shorter.

The mean wait of this group is within the 18 week government target without any changes to our current radiology protocols. Using this direct referral protocol we saved 29 outpatient appointments; if followed for all eligible patients we would have saved 57 outpatient appointments.

Aims. To determine whether obesity and malnutrition have a synergistic effect on outcomes from skeletal trauma or elective orthopaedic surgery. Methods. Electronic databases including MEDLINE, Global Health, Embase, Web of Science, ScienceDirect, and PEDRo were searched up to 14 April 2024, as well as conference proceedings and the reference lists of included studies. Studies were appraised using tools according to study design, including the Oxford Levels of Evidence, the Institute of Health Economics case series quality appraisal checklist, and the CLARITY checklist for cohort studies. Studies were eligible if they reported the effects of combined malnutrition and obesity on outcomes from skeletal trauma or elective orthopaedic surgery. Results. A total of eight studies (106,319 patients) were included. These carried moderate to high risk of bias. Combined obesity and malnutrition did not lead to worse outcomes in patients undergoing total shoulder arthroplasty or repair of proximal humeral fractures (two retrospective cohort studies). Three studies (two retrospective cohort studies, one case series) found that malnourishment and obesity had a synergistic effect and led to poor outcomes in total hip or knee arthroplasty, including longer length of stay and higher complication rates. One retrospective cohort study pertaining to posterior lumbar fusion found that malnourished obese patients had higher odds of developing surgical site infection and sepsis, as well as higher odds of requiring a revision procedure. Conclusion. Combined malnutrition and obesity have a synergistic effect and lead to poor outcomes in lower limb procedures. Appropriate preoperative optimization and postoperative care are required to improve outcomes in this group of patients. Cite this article: Bone Joint J 2024;106-B(10):1044–1049

Aims. Joint registries classify all further arthroplasty procedures to a knee with an existing partial arthroplasty as revision surgery, regardless of the actual procedure performed. Relatively minor procedures, including bearing exchanges, are classified in the same way as major operations requiring augments and stems. A new classification system is proposed to acknowledge and describe the detail of these procedures, which has implications for risk, recovery, and health economics. Methods. Classification categories were proposed by a surgical consensus group, then ranked by patients, according to perceived invasiveness and implications for recovery. In round one, 26 revision cases were classified by the consensus group. Results were tested for inter-rater reliability. In round two, four additional cases were added for clarity. Round three repeated the survey one month later, subject to inter- and intrarater reliability testing. In round four, five additional expert partial knee arthroplasty surgeons were asked to classify the 30 cases according to the proposed revision partial knee classification (RPKC) system. Results. Four classes were proposed: PR1, where no bone-implant interfaces are affected; PR2, where surgery does not include conversion to total knee arthroplasty, for example, a second partial arthroplasty to a native compartment; PR3, when a standard primary total knee prosthesis is used; and PR4 when revision components are necessary. Round one resulted in 92% inter-rater agreement (Kendall’s W 0.97; p < 0.005), rising to 93% in round two (Kendall’s W 0.98; p < 0.001). Round three demonstrated 97% agreement (Kendall’s W 0.98; p < 0.001), with high intra-rater reliability (interclass correlation coefficient (ICC) 0.99; 95% confidence interval 0.98 to 0.99). Round four resulted in 80% agreement (Kendall’s W 0.92; p < 0.001). Conclusion. The RPKC system accounts for all procedures which may be appropriate following partial knee arthroplasty. It has been shown to be reliable, repeatable and pragmatic. The implications for patient care and health economics are discussed. Cite this article: Bone Jt Open 2021;2(8):638–645

In this review, we discuss the evidence for patients returning to sport after hip arthroplasty. This includes the choices regarding level of sporting activity and revision or complications, the type of implant, fixation and techniques of implantation, and how these choices relate to health economics. It is apparent that despite its success over six decades, hip arthroplasty has now evolved to accommodate and support ever-increasing patient demands and may therefore face new challenges. Cite this article: Bone Joint J 2020;102-B(6):661–663

Abstract. Introduction. There is a need to develop approaches to reduce chronic pain after total knee replacement. There is an established link between disturbed sleep and pain. We tested the feasibility of a trial evaluating the clinical and cost-effectiveness of a pre-operative sleep assessment and complex intervention package for improving long-term pain after TKR. Methodology. REST was a feasibility multi-centre randomised controlled trial with embedded qualitative study and health economics. Participants completed baseline measures and were randomised to usual care or the intervention, a tailored sleep assessment and behavioural intervention package delivered by an extended scope practitioner three months pre-operatively with a follow-up call up at four-weeks. Patient reported outcomes were assessed at baseline, one-week pre-surgery, and 3-months post-surgery. Results. 57 patients were randomised and 20 had surgery within the study timelines. All patients allocated the intervention attended an appointment and most engaged with treatment. The intervention group reported improvements in sleep (Sleep Conditions Indicator) and neuropathic pain (painDETECT) scores. Participants found the sleep treatments and study processes to be acceptable. The mean cost of the intervention was estimated at £134.45 per patient. Conclusion. The feasibility study has shown that patient recruitment is feasible, engagement with and adherence to the intervention is high, and the intervention is acceptable to patients and clinicians. Preliminary findings show that the intervention group had improved sleep quality and had reduced levels of pre-operative neuropathic pain. This study has demonstrated that a full RCT is feasible and identified areas for improvement to optimize the trial design

Displaced acetabular fractures in the older patient present significant treatment challenges. There is evidence the morbidity and mortality associated is similar to the fractured neck of femur cohort. Despite growing literature, there remains significant controversy regarding treatment algorithms; varying between conservative management, to fracture fixation and finally surgical fixation and simultaneous THA to allow immediate full weight bearing. £250k NIHR, Research for Patient Benefit (Ref: PB-PG-0815-20054). Trial ethical approval (17/EE/0271). After national consultation, 3 arms included; conservative management, fracture fixation and simultaneous fracture fixation with THA. Statistical analysis required minimum 12 patients/3 arms to show feasibility, with an optimum 20/arm. Inclusion criteria; patients >60 years & displaced acetabular fracture. Exclusion criteria: open fracture, THA in situ, pre-injury immobility, polytrauma. Primary outcome measure - ability recruit & EQ-5D-5L at 6 months. Secondary outcome measures (9 months); OHS, Disability Rating Index, radiographs, perioperative physiological variables including surgery duration, blood loss, complications and health economics. 11 UK level 1 major trauma centres enrolled into the trial, commenced December 2017. Failure surgical equipoise was identified as an issue regarding recruitment. Full trial recruitment (60 patients) achieved; 333 patients screened. 66% male, median age 76 (range 63–93), median BMI 25 (range 18–37), 87% full mental capacity, 77% admitted from own home. 75% fall from standing height. 60% fractures; anterior column posterior hemi-transverse. Trial feasibility confirmed December 2020. Presented data- secondary outcomes that are statistically significant in improvement from baseline for only the fix and replace arm, with acceptable trial complications. Issues are highlighted with conservative management in this patient cohort. Our unique RCT informs design and sample size calculation for a future RCT. It represents the first opportunity to understand the intricacies of these treatment modalities. This RCT provides clinicians with information on how best to provide management for this medically complex patient cohort

Introduction. Retention and removal of children's orthopaedic metalwork is a contentious issue that has implications for current resource allocation, health economics, complication risks and can impact on future treatments. Understanding how to guide families make informed choices requires an overview of all the relevant evidence to date, and knowledge of where the evidence is lacking. Our aim was to systematically review the literature and provide a meta-analysis where possible, recommending either retention or removal. Materials and Methods. A search of the literature yielded 2420 articles, of which 22 papers were selected for the study analysis. Inclusion criteria: Any paper (evidence level I-IV) assessing the risks or benefits of retaining or removing orthopaedic metalwork in children. Exclusion criteria: Spinal implants; implant number < 40; < 75% recorded follow up; papers including implants in their analysis that always require removal; patients aged >18 years. Results. In total, 4988 patients (6412 implants) were included across all 22 studies. There was a significant amount of heterogenicity between studies. Overall the short term risks of metalwork retention and removal are low, with a few exceptions. In forearm plating re-fracture rates following removal were lower than those seen in studies looking at retained metalwork, provided removal occurred later than 12 months from the initial operation. Forearm re-fracture rates after removal of flexible nails significantly increased if removal was performed before 6 months. Major complications following routine metalwork removal from the proximal femur are relatively rare, with re-fracture rates of 1–5%. The majority of these re-fractures are seen in neuromuscular patients or in patients where removal occurs earlier than 6 months. Routine metalwork removal following SUFE had a complication rate of 30–60%. Conclusions. We found that there are certain subgroups of children that benefit from retention of metalwork and some that benefit from removal. There are several subgroups that we have identified which do not yet have sufficient long term evidence to make a balanced recommendation. We advise that families are made aware of what is known and what is unknown in order to allow for shared decision making

Introduction. This analysis aims to provide an update of the Level-IV Partners Arthroplasty Registry (PAR), a quality-improvement initiative and research data repository. Methods. The Harris Joint Registry was founded in 1969 and has since expanded to become the Partners Arthroplasty Registry (PAR). Today, the PAR captures data on total hip and total knee arthroplasties conducted at seven hospitals in Massachusetts. Over time, data has been sourced through independent collection at a single hospital, retrospective sourcing through the Research Patient Data Registry (RPDR), and currently through the Enterprise Data Warehouse (EDW). Various statistical methods analyzed changing trends of care provided to patients across affiliated institutions. PROMs collected in the PAR are the PROMIS Physical Function and Global Health Short Forms, the HOOS and KOOS. The registry is an associate member of ISAR and will incorporate the international implant library. Results. The PAR contains demographic, implant-specifics, and radiographic data for 45,645 primary arthroplasties and 8,400 revision surgeries from 1998 to 2018. The average recorded Charlson Comorbidity Index is 0.98. Average length of stay prior to home or care facility discharge decreased from 5.00 days in 2001 to 3.00 days in 2018. The average 30-day and 90-day mortality rates for 2018 were 0. 18% and 0.28%, respectively. Home discharge increased from 30.1% to 79.0% from 2001–2018. The values for these parameters are varied across the seven sites. Conclusion. The PAR can be used to develop best practices, analyze health-care economics, and promote evidence-based medicine. We are also developing a platform for registry development that can be exported by other hospitals that utilize an Epic-based record system. For any tables or figures, please contact the authors directly

Objectives. Subtotal or total meniscectomy in the medial or lateral compartment of the knee results in a high risk of future osteoarthritis. Meniscal allograft transplantation has been performed for over thirty years with the scientifically plausible hypothesis that it functions in a similar way to a native meniscus. It is thought that a meniscal allograft transplant has a chondroprotective effect, reducing symptoms and the long-term risk of osteoarthritis. However, this hypothesis has never been tested in a high-quality study on human participants. This study aims to address this shortfall by performing a pilot randomised controlled trial within the context of a comprehensive cohort study design. Methods. Patients will be randomised to receive either meniscal transplant or a non-operative, personalised knee therapy program. MRIs will be performed every four months for one year. The primary endpoint is the mean change in cartilage volume in the weight-bearing area of the knee at one year post intervention. Secondary outcome measures include the mean change in cartilage thickness, T2 maps, patient-reported outcome measures, health economics assessment and complications. Results. This study is expected to report its findings in 2016. Cite this article: Bone Joint Res 2015;4:93–8

Increasing pressure to use rapid recovery care pathways when treating patients undergoing total hip arthroplasty (THA) is evident in current health care systems for numerous reasons. Patient autonomy and health care economics has challenged the ability of THA implants to maintain functional integrity before achieving bony union. Although collared stems have been shown to provide improved axial stability, it is unclear if this stability correlates with activity levels or results in improved early function to patients compared to collarless stems. This study aims to examine the role of implant design on patient activity and implant fixation. The early follow-up period was examined as the majority of variation between implants is expected during this time-frame. Patients (n=100) with unilateral hip OA who were undergoing primary THA surgery were recruited pre-operatively to participate in this prospective randomized controlled trial. All patients were randomized to receive either a collared (n=50) or collarless (n=50) cementless femoral stem. Patients will be seen at nine appointments (pre-operative, < 2 4 hours post-operation, two-, four-, six-weeks, three-, six-months, one-, and two-years). Patients completed an instrumented timed up-and-go (TUG) test using wearable sensors at each visit, excluding the day of their surgery. Participants logged their steps using Fitbit activity trackers and a seven-day average prior to each visit was recorded. Patients also underwent supine radiostereometric analysis (RSA) imaging < 2 4 hours post-operation prior to leaving the hospital, and at all follow-up appointments. Nineteen collared stem patients and 20 collarless stem patients have been assessed. There were no demographic differences between groups. From < 2 4 hours to two weeks the collared implant subsided 0.90 ± 1.20 mm and the collarless implant subsided 3.32 ± 3.10 mm (p=0.014). From two weeks to three months the collared implant subsided 0.65 ± 1.54 mm and the collarless implant subsided 0.45 ± 0.52 mm (p=0.673). Subsidence following two weeks was lower than prior to two weeks in the collarless group (p=0.02) but not different in the collared group. Step count was reduced at two weeks compared to pre-operatively by 4078 ± 2959 steps for collared patients and 4282 ± 3187 steps for collarless patients (p=0.872). Step count increased from two weeks to three months by 6652 ± 4822 steps for collared patients and 4557 ± 2636 steps for collarless patients (p=0.289). TUG test time was increased at two weeks compared to pre-operatively by 4.71 ± 5.13 s for collared patients and 6.54 ± 10.18 s for collarless patients (p=0.551). TUG test time decreased from two weeks to three months by 7.21 ± 5.56 s for collared patients and 8.38 ± 7.20 s for collarless patients (p=0.685). There was no correlation between subsidence and step count or TUG test time. Collared implants subsided less in the first two weeks compared to collarless implants but subsequent subsidence after two weeks was not significantly different. The presence of a collar on the stem did not affect patient activity and function and these factors were not correlated to subsidence, suggesting that initial fixation is instead primarily related to implant design

Introduction. As total knee arthroplasty incidence in the United States continues to increase, health care entities are looking to reform policy to decrease costs while improving efficiency and quality of care. The allocation of hospital and surgeon charges and payments is an important aspect of health care economics, but the trends and relationship between surgeon and hospital charges and payments for knee arthroplasty have not been well examined. The goal of this study is to report trends and variation in hospital charges and payments compared to surgeon charges and payments for total knee arthroplasty in a Medicare population. Methods. The 5% Medicare sample was used to capture hospital and surgeon charges and payments for total knee arthroplasty from 2005–2014. Two important values were calculated: (1) the charge multiplier (CM) which is the ratio of hospital to surgeon charges, and (2) the payment multiplier (PM), which is the ratio of hospital to surgeon payments. The year to year variation and regional trends in patient demographics, Charlson Comorbidity Index (CCI), length of stay (LOS), CM and PM were evaluated for all patients. Statistical significance of trends was evaluated using student's t-tests. Correlations between the financial multipliers and LOS were evaluated using a Pearson correlation coefficient (r). Results. 117,698 patients were included. Hospital charges were significantly higher than surgeon charges throughout the study period and increased substantially (CM increased from 7.9 to 11.4, p <0.0001) [Fig 1,2]. Hospital payments relative to surgeon payments ratio (PM) followed a similar trend, increasing from 10.0 to 14.6 (p < 0.0001). [Fig 1,2]. Similar trends were noted in all four regions of the US. LOS decreased significantly throughout the study from 3.8 to 2.8 days (p < 0.0001). CCI remained stable over the study period. Both the CM (r2 = −0.90) and PM (r2 = −0.84) were strongly negatively associated with LOS, meaning that as LOS decreased, the ratio of hospital to surgeon charges and payments (CM and PM) paradoxically significantly increased [Fig 3]. Conclusions. Hospital charges and payments relative to surgeon charges and payments have significantly increased for total knee arthroplasty despite stable patient complexity as measured by CCI and decreasing LOS. These results encourage the need for future studies with detailed cost analysis to identify the causes of hospital and surgeon financial malalignment. As healthcare shifts toward value-based care with shared responsibility for outcomes and cost, more closely aligned incentives between hospitals and providers is needed. For figures, tables, or references, please contact authors directly

Introduction. In major orthopaedic departments, typically several total knee systems are used. Each system requires several sets of instruments, each set with many trays of complicated and expensive parts. The logistics and costs of maintainance are considerable. Our overall goal is to investigate the feasibility of autoclavable single-use 3D printed instruments made from a polymeric material, used for any type of total knee design. The procedure will be standardized and adjustments easy to implement. Each set will be packaged individually, and used for a single case. There are many aspects to this study; in this part, the aims are to identify suitable materials for autoclavability and strength, and then to compare the accuracy of a novel design of 3D printed tibial cutting guide with a current metallic guide. Methods. Test samples were designed to simulate shapes in current instruments, such as mating pegs and holes, threaded screws, and slotted blocks. Each set was produced in biocompatible materials, ABS-M30i, VeroClear (MED610), Ultem1010, and Nylon 12. Each part was laser scanned, and then imaged virtually using a reverse engineering software (GeoMagic). Manual measurements of key dimensions were also made using calipers. The parts were autoclaved using a standardized protocol, 30 minutes at 250° F. All parts were re-scanned and measured to determine any changes in dimensions. To test for strength and abrasion resistance, the slotted blocks were pinned to sawbones model tibias, and an oscillating saw used to cut through the slot. A compact 3D printed tibial cutting guide was then designed which fitted to the proximal tibia and allowed varus-valgus, tibial slope and height adjustments. A small laser attached to the guide projected to a target at the ankle. Tests were made on 20 sawbones, and compared with 20 with a standard metal cutting guide. Digitization was used to measure the angles of the cuts. Results. Prior to autoclaving, the mating parts of all parts were congruent, except for Nylon 12 which had processing debris in slots and screw threads. The ABS-M30i shapes became grossly deformed after autoclaving. The other materials experienced only small changes in dimensions without loss of overall shape, but the slot of the Nylon 12 block was stenotic, 1.4 mm compared to 0.9 mm before autoclaving. In saw blade testing, the VeroClear block fractured through the corner of the slot, while the Nylon 12 block deformed due to heating. The Ultem1010 block produced a small amount of debris, but maintained its shape without any structural damage. In the tests of the tibial cutting guide the 3D printed laser-guided tibial cutting guide resulted in a mean absolute error of 1.72°±1.31° and 1.19°±0.93°, for the tibial slope and varus-valgus respectively. For the conventional guides, these values were 3.78°±1.98° and 2.33°±0.98°, respectively. These measurements were found to be statistically significant with p values of 0.004 and 0.001, respectively. Conclusions. Thus far, apart from patient specific cutting guides and trial components, 3D printing has had limited applications in total knee surgery. As cost containment remains prominent, the use of 3D printing to produce standardized instruments may become viable. These instruments would not require pre-op planning such as CT or MRI, yet allow patient-specific angular settings. Our results indicated that Ultem1010 is a promising material, while a novel tibial cutting guide showed higher accuracy than standard, as well as being quicker to use. These initial tests indicated the viability of 3D printed instruments, but further work will include design and evaluation of the other cutting guides, manufacturing logistics such as in-house or company- based, and economics

The high and ever increasing cost of medical care worldwide has driven a trend toward new payment models. Event based models (such as bundled payment for surgical events) have shown a greater potential for care and cost improvement than population-based models (such as accountable care organizations). Since joint replacement is among the most frequent and costly surgical events in medicine, bundled payments for joint replacement episodes have been at the forefront of evolution from fee-for-service to value-based care models and episode-based healthcare reform in general. Our education as surgeons in medical school, residency, fellowship, and in continuing education has been almost entirely non-economic in focus. Yet, we surgeons are now evolving from being primarily responsive for our patients' medical care to being also responsible for all expenditures associated with our patients' care. Similarly, while the cost of our patients' care was not even available to us, every dollar of expenditure for a patient's episode of care is now available to us in some circumstances. For example, a typical primary joint replacement episode may cost $30,000 for a patient insured by Medicare in the US. A surgeon performing 400 joint replacements per year is therefore authorizing upwards of $12M a year in health care spending by making the decisions to perform reconstructive procedures on those patients. The risk for value-based surgical episodes of care can be born by various entities including hospital systems or the surgeons themselves. Recent evidence demonstrates that quality improves and cost decreases more rapidly when surgeons take primary responsibility and risk for episodes of care as compared to when a hospital system or third party takes primary responsibility and risk. Yet, as surgeons, our education in the field of medical economics, value-based episodes of care, and payment reform is only just beginning. The more we understand about the cost and value of the services that we order for our patients, the more leadership can provide as healthcare evolves. The current presentation will describe the specific cost of care for the primary joint replacement patient preliminary experience with accepting risk and responsibility for these patients. It is likely that our patients will be best served if we surgeons provide as much leadership as possible in their care, both medically and economically