Introduction. Arthrodesis of the 1st metatarso-phalangeal joint (MTPJ) is a common procedure in forefoot surgery for hallux rigidus and severe hallux valgus. Debate persists on two issues - the best preparation method for the articular surfaces, and the optimal technique for operative stabilisation of the joint. Methods. We performed 1. st. MTPJ arthrodesis in 100 patients randomized into two equal groups. In the first group, the articular surfaces were prepared using cup-and-cone reamers, whilst in the second group, ‘flat cut’ osteotomies were performed with an oscillating saw. In all other respects, their treatment was identical. Fixation was secured using a plantar double compression Fixos™ screw and dorsal Anchorage™ plate. Full weight-bearing was allowed on the first post-operative day. Patients completed self-administered satisfaction questionnaires, including an AOFAS and SF-36 score pre-operatively and at two and six months post-operatively. Clinical examination and radiographs were compared at zero, two and six months. Statistical analysis was performed using Instat. Results. Radiographic union of the 1. st. MTPJ was documented in 45/50 patients in the reamer group and 42/50 in the ‘flat-cut’ group at two months and in all patients at six months. The AOFAS score improved from a mean of 46 +/− 15 pre-operatively to 72 +/−8 (out of 90) at two months and 83 +/− 4 (out of 90) at six months. SF-36 subscales for bodily pain and for physical function increased from 42.4 +/− 16.1 and 37.3 +/− 12.8 respectively pre-operatively to 82.2 +/− 11.2 and 84.6 +/− 9.3 respectively at six months. There was no statistically significant difference between groups. Conclusions. Arthrodesis of the 1. st. MTPJ with the Anchorage™ plate and compression screw gives excellent clinical and radiographic results. Preparation method does not affect early outcomes but may influence important technical points such as length of the first ray or inter-phalangeal angle

Aim. Failed consolidation (nonunion) after foot and ankle arthrodesis is a major complication, which can lead to additional revision arthrodesis with increased risk of morbidity. Multiple factors can contribute to developing a nonunion, including a low-grade infection. The aim of this study was to investigate the rate of unsuspected low-grade infection in revision arthrodesis for nonunions after foot and ankle arthrodesis. We also analyzed the outcome of unsuspected low-grade infections. Method. We conducted a retrospective study in The Sint Maartenskliniek, The Netherlands. All patients who underwent revision arthrodesis for assumed aseptic nonunion after foot and ankle arthrodesis between January 2020 and July 2021 were included. Patients were excluded if <5 tissue samples were obtained during revision arthrodesis or if they were treated for infection after the index arthrodesis. For the included patients, at least 5 tissue samples for culture were taken during the revision arthrodesis. The causative microorganisms, antibiotic susceptibility and treatment were assessed. An unsuspected infection was defined as ≥2 positive cultures with phenotypical identical microorganisms. Success was defined as union on imaging during clinical follow-up, without signs of persistent infection after finishing the antibiotic treatment. Results. In total 91 revision arthrodesis due to nonunion were performed. The mean duration between index and revision arthrodesis was 571 days. In 14 patients, an unexpected infection was diagnosed. The most frequent causative bacteria identified were Cutibacterium acnes (n=10) and Staphylococcus spps. (n=5). One infection was caused by a Gram-negative bacilli (Acinetobacter spps.). Two infections were polymicrobial. Of the 14 infections, 12 were treated with antibiotics for 12 weeks, 1 for 6 weeks and 1 was not treated. After one-year follow-up, the success rate was 86% and in one patient re-surgery was performed for a non-infectious reason. Conclusions. In 18% of the revisions for nonunion after foot and ankle arthrodesis, an unexpected low- grade infection was the cause of the nonunion. Nonunion occurring after foot and ankle arthrodesis is a severe complication, leading to additional revision arthrodesis. Low-grade infection should be considered as possible explanation of the nonunion, despite the lack of local inflammatory signs. As 18% of the nonunions were unexpectedly caused by low-grade infection, we strongly recommend obtaining at least 5 tissue samples for culture during revision arthrodesis. The outcome of unexpected infection as cause of nonunion is good, when treated with targeted antibiotics for 12 weeks

Anatomically specific fixation devices have become mainstream, yet there are anatomical regions and clinical conditions where no pre-contoured plates are available, such as for glenohumeral arthrodesis. In a case series of 4 glenohumeral arthrodesis patients, a consultant orthopaedic surgeon at GCUH implemented 3D printing technology to create reconstructions of each patient's shoulder girdle to pre-contour arthrodesis plates. Our aim was to quantify the cost-benefit & intra-operative time savings of this technique in glenohumeral arthrodesis. We hypothesized that the use of 3D printing for creating patient specific implants through pre-operative contouring of plates will lead to intra-operative time and cost savings by minimising time spent bending plates during surgery. This study analysed 4 patients who underwent shoulder arthrodesis by a single consultant orthopaedic surgeon at GCUH between 2017-2021. A CT-based life-size model of each patient's shoulder girdle was 3D printed using freely available computer software programs: 3D Slicer, Blender, Mesh Mixer & Cura. Once the patient's 3D model was created, plate benders were used to contour the plate pre-op, which was then sterilised prior to surgery. Arthrodesis was performed according to AO principles of fixation. The time spent pre-bending the plate using the 3D model was calculated to analyse the intra-op time and cost-saving benefits. For the 4 cases, the plate pre-bending times were 45, 40, 45 & 20 minutes (average 38.8 mins). The intra-op correction time to make small adjustments to the plate was 2 min/ case. 3 plates needed minor (3 degree) adjustment to fine-tune scapula spine contouring. 1 plate needed a 5 degree correction to fine-tune hand position. On average, the pre-bending of the plate saved approximately 38.8 mins intra-op/ case. These shorter anaesthetic and operating times equate to approximately $2586 saving/ case, given an estimate of $4000/hour of theatre costs. We conclude that pre-bending plates around 3D-printed life-size models of an individual's shoulder girdle prior to surgery results in approximately 38.8 mins time saving intra-op when used in shoulder arthrodesis. This is a viable and effective technique that will ultimately result in significant operative time and financial savings

Introduction. Despite the rising popularity of 1st carpometacarpal joint (CMCJ) arthrodesis as one of the surgical options for basilar thumb arthritis, the available literature on this is poor. This study aims to investigate post-operative pinch and grip strength following 1st CMCJ arthrodesis, at a minimum of 1 year follow-up. Complication rates, range of motion and patient reported scores were also evaluated. Methods. A retrospective cohort (2012–2020) was used, which included patients who had arthrodesis performed by the Hands surgeons at Counties Manukau DHB. In a 15 minute visit, we took the measurements using our standard dynamometer and pinch gauge, and collected three questionnaires [QuickDASH, PRWHE, PEM]. For analysis, we compared our results to the preoperative measures, contralateral hand, and to a previous study on a similar cohort looking at thumb strength following trapeziectomy. Results. 42 arthrodesis were performed, and 24 were available for follow-up. The average follow-up time was 77 months and the average age was 51 years old. Overall, we found a statistically significant improvement in thumb strength following surgery. Mean preoperative grip strength was 21.4kg and 32.5kg postoperatively (= +11kg). Preoperative pinch strength was 5.5kg and 7kg postoperatively (= +1.5kg). These results were significantly higher compared to the trapeziectomy cohort. We also found an improvement in 1st CMCJ ROM post-operatively. 7 complications were reported (29.1%). 4 were metalware-related and 3 were non-union. QuickDASH score significantly improved from a median of 42.95 to 12.5 while PRWHE from 67.5 to 14.5. Overall patient satisfaction was 87.4%. Conclusion. 1st CMCJ arthrodesis leads to an improvement in thumb function, pain and range of movement and results in high patient satisfaction, and therefore should be recommended for younger patients who need a pain-free and strong thumb

Introduction. Knee arthrodesis is a useful limb salvage technique to maintain function in patients with complex and infected total knee arthroplasties (TKA). There are a number of commonly used external fixators, but no consensus on which of these are optimal. The aim of this study was to synthesise the current literature to guide clinical decision making and improve patient outcomes. We systematically review the literature to compare outcomes of external fixators in arthrodesis following infected TKA. Materials & Methods. A systematic review of the literature of primary research articles investigating the use of external fixators for knee arthrodesis after an infected TKA was conducted. Relevant articles were identified with a search strategy on online databases (EMBASE and Medline) and reviewed by two independent reviewers. Clinical outcome measures were independently extracted by two reviewers which included union rate, infection eradication rate, complication rate, time to fusion, and time in frame. Results. Circular frames were more likely to result in union compared to biplanar (OR 1.40 p=0.456) and monoplanar frames (OR 2.28 p=0.018). Infection recurrence was least likely in those treated by circular frames when compared to monoplanar (OR 0.12 p=0.005) and biplanar external fixators (0.41 P=0.331). Complication rates were highest in the circular fixator group, followed by the monoplanar fixator group and biplanar fixator group at 34%, 31% and 11% respectively. Conclusions. Analysis of the available literature suggests higher union and infection eradication rates with circular frames over the other two fixation methods despite a higher complication rate. There is a paucity in the literature and therefore, no firm conclusions can be drawn. Further research investigating the variations and biomechanical properties between different external fixation methods for knee arthrodesis is necessary. Further clarity in reporting and pooled data would be useful for future analysis

Tibiotalocalcaneal arthrodesis (TTCA) is a salvage procedure to functionally block the ankle and subtalar joints to treat severe ankle and hindfoot disease. Complication rates range between 20-40%, with below-knee amputation rate 1.5-19%. The heterogeneous patient cohort and indication(s) for surgery make post-operative outcomes difficult to predict. Consulting patients about potential pain and functional outcomes is difficult. When researching this area commonly, PROM data is used, less frequently functional objective measures like the 2-minute-walk-test (2MWT) are used. The aim was to compare the PROMs and objective outcomes between patients who underwent TTCA and BKA. Fifty-two patients underwent a TTCA using an intramedullary hindfoot nail. Indications for TTCA, post-traumatic OA, failed arthrodesis and malalignment. These patients were compared to 11 patients who underwent unilateral below knee amputation (BKA) due to trauma. Outcomes measures PROMs AOFAS ankle hindfoot scale and Shor-Form 36 (SF-36). Objective measures; 2MWT, Timed-up-and-go (TUG). Mean age TTCA 55.9, BKA 46.4. Average follow-up time 53 months. TTCA group had average 6.3 operations prior to arthrodesis (range 1-23). Of the TTCA group two ankles did not unite (7%), all complication rate 35%, 18% reported no pain. A significant negative correlation was demonstrated between the clinical outcome and the number of surgeries prior to the TTCA. TUG and 2MWT had significantly (p<0.05) better outcomes for the BKA group compared to TTCA. SF-36 BKA patients scored higher than the TTCA patients on physical functioning (p<0.01) and mental health (p<0.05) subscales as well as the mental component score (p<0.05). This study gives clinicians evidence about the natural history of hindfoot arthrodesis and functional outcomes from BKA. Hopefully this study will improve evidence to help patients and surgeons make decisions about expected surgical outcomes from TTCA and BKA procedures

There is no consensus for the appropriate surgical management of chronic ulnar collateral ligament (UCL) injuries of the thumb. A systematic review of Pubmed, MEDLINE, EMBASE and ePub Ahead of Print was performed in accordance with Preferred Reporting of Items in Systematic Review and Meta-analysis (PRISMA) guidelines and formal protocol registered with PROSPERO. Two authors collated data from 10 studies that met strict inclusion criteria, using various surgical techniques in 131 thumbs. Results were heterogenous and metanalysis of results not possible. These data were, therefore, qualitatively assessed and synthesised. Bias was assessed using the ROBINS-I tool. Direct repair, reconstruction with free tendon or bone-tissue-bone grafts and arthrodesis all demonstrated favourable outcomes with Patient Reported Outcome Measures. Direct repair can be safely performed more than two months following injury, with a positive mean Disabilities of the Arm, Shoulder and Hand (DASH) score of 13.5 despite evidence of radiographic osteoarthritis. Arthrodesis should be considered in heavy manual laborers or those at risk of osteoarthritis as it provides significant reduction in pain (Mean Visual Analogue Score of 1.2) when compared to other methods. Free tendon grafting has been criticised for failure rates and poor functional grip strength, however collated analysis of 97 patients found a single graft rupture and mean grip strength of 97% (of the contralateral thumb). Bone-tissue-bone grafting was the least effective method across all outcome measures. Studies included were at high risk of bias, however, it can be concluded that delayed direct repair can be performed safely, while arthrodesis may benefit certain patient subgroups. New findings suggest poor efficacy of bone-tissue-bone grafts, but that free tendon grafting with palmaris longus are in fact safe with good restoration of grip strength. The optimal graft and configuration are yet to be determined for reconstructive methods

Abstract. Background. Multiple devices can stabilise the MTP joint for arthrodesis. The ideal implant should be easy to use, provide reproducible and high quality results, and ideally enable early rehabilitation to enable faster return to function, whilst lessening soft tissue irritation. We prospectively evaluated the combination of the IO-Fix (Extremity Medical, NJ, USA) device which consists of an intra-osseous post and lag screw that offers these features with full bearing of weight after surgery. Methods. 67 feet in 65 patients were treated over 31 months. After excluding patients lost to follow-up, undergoing revision arthrodesis, or concomitant first ray procedures, there were 54 feet in 52 patients available with a minimum 12 month follow-up with clinical and radiographic outcomes. All patients were treated using a similar operative technique with immediate bearing of weight in a rigid soled shoe. Results. The mean MOXFQ score improved from 46.4 (range 18 – 64) before surgery to 30.2 (range 0 – 54) at 6 months after surgery (p=0.02), and 18.4 (range 0 – 36) (p< 0.001) at latest follow-up. Arthrodesis across the MTP joint was achieved in 52 feet (96%), at a mean of 61 days (range 39–201). Non-union was observed in two feet; superficial wound infections in two feet; and metalwork impingement in three feet. Conclusions. In the largest reported series to date, the IO-Fix device achieved a union rate of 96% across the MTP joint when coupled with immediate bearing of weight. Significant improvements were seen in patient reported outcomes with low complication rates

Cervical spinal arthrodesis is the standard of care for the treatment of spinal diseases induced neck pain. However, adjacent segment disease (ASD) is the primary postoperative complication, which draws great concerns. At present, controversy still exists for the etiology of ASD. Knowledge of cervical spinal loading pattern after cervical spinal arthrodesis is proposed to be the key to answer these questions. Musculoskeletal (MSK) multi-body dynamics (MBD) models have an opportunity to obtain spinal loading that is very difficult to directly measure in vivo. In present study, a previously validated cervical spine MSK MBD model was developed for simulating cervical spine after single-level anterior arthrodesis at C5-C6 disc level. In this cervical spine model, postoperative sagittal alignment and spine rhythms of each disc level, different from normal healthy subject, were both taken into account. Moreover, the biomechanical properties of facet joints of adjacent levels after anterior arthrodesis were modified according to the experimental results. Dynamic full range of motion (ROM) flexion/extension simulation was performed, where the motion data after arthrodesis was derived from published in-vivo kinematic observations. Meanwhile, the full ROM flexion/extension of normal subject was also simulated by the generic cervical spine model for comparative purpose. The intervertebral compressive and shear forces and loading-sharing distribution (the proportions of intervertebral compressive and shear force and facet joint force) at adjacent levels (C3-C4, C4-C5 and C6-C7 disc levels) were then predicted. By comparison, arthrodesis led to a significant increase of adjacent intervertebral compressive force during the head extension movement. Postoperative intervertebral compressive forces at adjacent levels increased by approximate 20% at the later stage of the head extension movement. However, there was no obvious alteration in adjacent intervertebral compressive force, during the head flexion movement. For the intervertebral shear forces in the anterior-posterior direction, no significant differences were found between the arthrodesis subject and normal subject, during the head flexion/extension movement. Meanwhile, cervical spinal loading-sharing distribution after anterior arthrodesis was altered compared with the normal subject's distribution, during the head extension movement. In the postoperative loading-sharing distribution, the percentage of intervertebral disc forces was further increased as the motion angle increased, compared with normal subject. In conclusion, cervical spinal loading after anterior arthrodesis was significantly increased at adjacent levels, during the head extension movement. Cervical spine musculoskeletal MBD model provides an attempt to comprehend postoperative ASD after anterior arthrodesis from a biomechanical perspective

Background. Traditional teaching recommends against arthroplasty in the index finger, due to concerns over failure with pinch stress, and prefers arthrodesis is for its stability. We aim to allay these fears and present the results of our series of index finger silastic PIPJ arthroplasties. Methods: Between 2007 & 2018 48 silastic index finger PIPJ arthroplasties were undertaken in 37 patients at our Hand Unit. All were performed under local anaesthetic ring block. Eleven patients underwent PIPJ arthroplasty in both Index fingers. Thirty-five women and two men made up the cohort with a mean age of 69 years. A retrospective analysis of all patients has been undertaken to determine the clinical results including patient satisfaction, grip and pinch strength and reoperation rates. Mean follow up was 5.1 years. Results. Six index fingers developed ulnar deviation greater than 10 degrees and there were five reoperations (10.2%). There was an excellent arc of movement of mean 44 degrees with high patient satisfaction and functional scores (mean VAS pain score 1.1, Quickdash 34, PEM 44). 90% of patients would undergo the procedure again and no patient would prefer a fusion. Conclusions: Silastic Interposition arthroplasty of the PIPJ of the Index finger is a durable procedure with excellent clinical outcomes. Our large study refutes the established technique of arthrodesis for Index finger OA, with low incidence of ulnar deviation and excellent patient satisfaction

Aim. Reconstruction of composite soft-tissue defects with extensor apparatus deficiency in patients with periprosthetic joint infection (PJI) of the knee is challenging. We present a single-centre multidisciplinary orthoplastic treatment concept based on a retrospective outcome analysis over 20 years. Method. One-hundred sixty-seven patients had PJI after total knee arthroplasty. Plastic surgical reconstruction of a concomitant perigenicular soft-tissue defect was indicated in 49 patients. Of these, seven presented with extensor apparatus deficiency. Results. One patient underwent primary arthrodesis and six patients underwent autologous reconstruction of the extensor apparatus. The principle to reconstruct missing tissue ‘like with like’ was thereby favoured: Two patients with a wide soft-tissue defect received a free anterolateral thigh flap with fascia lata; one patient with a smaller soft-tissue defect received a free sensate, extended lateral arm flap with triceps tendon; and three patients received a pedicled medial sural artery perforator gastrocnemius flap, of which one with Achilles tendon. Despite good functional results 1 year later, long-term follow-up revealed that two patients had to undergo knee arthrodesis because of recurrent infection and one patient was lost to follow-up. In parts, results have been published under doi: 10.7150/jbji.47018. Conclusions. A treatment concept and its rationale, based on a single-centre experience, is presented. It differentiates between various types of soft-tissue defects and shows reconstructive options following the concept to reconstruct ‘like with like’. Despite good results 1 year postoperatively, PJI of the knee with extensor apparatus deficiency remains a dreaded combination with a poor long-term outcome

Introduction. Classical fixation using a circular frame involves two rings per segment and in many units this remains the norm whether using ilizarov or hexapod type frames. We present the results of two ring circular frame at King's College Hospital. Materials & Methods. A prospective database has been maintained of all frames applied since 2007. Radiographs from frames applied prior to July 2022 were examined. Clinic letters were then used to identify complications. Included: two ring hexapod for fracture, malunion, nonunion, arthrodesis or deformity correction in the lower limb. Excluded: patients under 16 years old, diabetic feet, Charcot joints, soft tissue contractures, arthrodiastasis, correction of the mid/forefoot, plate fixation augmentation, fixation off a third ring. Results. 518 two ring hexapods were identified. Mean age was 46 (16–89). 55% were for fracture, 18% for malunion, 11% for nonunion. Mean frame time was 7 months (2–29 months). All clinic letters from 384 patients showed 203 patients (52%) had at least one pin site infection, 27 nonunions (7%), 16 frame revisions (4%), 25 bone grafting procedures (7%), 5 cases of septic arthritis (1%), 3 periprosthetic fractures (0.8%),), 12 malunions (3%), 4 Amputations (1%). Conclusions. These results demonstrate the efficacy of a two ring hexapod for patients requiring reconstruction of the lower limb

Intraoperative range of motion (ROM) radiographs are routinely taken during scaphoidectomy and four corner fusion surgery (S4CF) at our institution. It is not known if intraoperative ROM predicts postoperative ROM. We hypothesize that patients with a greater intra-operativeROM would have an improved postoperative ROM at one year, but that this arc would be less than that achieved intra- operatively. We retrospectively reviewed 56 patients that had undergone S4CF at our institution in the past 10 years. Patients less than 18, those who underwent the procedure for reasons other than arthritis, those less than one year from surgery, and those that had since undergone wrist arthrodesis were excluded. Intraoperative ROM was measured from fluoroscopic images taken in flexion and extension at the time of surgery. Patients that met criteria were then invited to take part in a virtual assessment and their ROM was measured using a goniometer. T-tests were used to measure differences between intraoperative and postoperative ROM, Pearson Correlation was used to measure associations, and linear regression was conducted to assess whether intraoperative ROM predicts postoperative ROM. Nineteen patients, two of whom had bilateral surgery, agreed to participate. Mean age was 54 and 14 were male and 5 were male. In the majority, surgical indication was scapholunate advanced collapse; however, two of the participants had scaphoid nonunion advanced collapse. No difference was observed between intraoperative and postoperative flexion. On average there was an increase of seven degrees of extension and 12° arc of motion postoperatively with p values reaching significance Correlation between intr-operative and postoperative ROM did not reach statistical significance for flexion, extension, or arc of motion. There were no statistically significant correlations between intraoperative and postoperative ROM. Intraoperative ROM radiographs are not useful at predicting postoperative ROM. Postoperative extension and arc of motion did increase from that measured intraoperatively

Polyetheretherketone (PEEK) interbody fusion cages combined with autologous bone graft is the current clinical gold standard treatment for spinal fusion, however, bone graft harvest increases surgical time, risk of infection and chronic pain. We describe novel low-stiffness 3D Printed titanium interbody cages without autologous bone graft and assessed their biological performance in a pre-clinical in vivo interbody fusion model in comparison to the gold standard, PEEK with graft. Titanium interbody spacers were 3D Printed with a microporous (Ti1: <1000μm) and macroporous (Ti2: >1000μm) design. Both Ti1 and Ti2 had an identical elastic modulus (stiffness), and were similar to the elastic modulus of PEEK. Interbody fusion was performed on L2-L3 and L4-L5 vertebral levels in 24 skeletally mature sheep using Ti1 or Ti2 spacers, or a PEEK spacer filled with iliac crest autograft, and assessed at 8 and 16 weeks. We quantitatively assessed bone fusion, bone area, mineral apposition rate and bone formation rate. Functional spinal units were biomechanically tested to analyse range of motion, neutral zone, and stiffness. Results: Bone formation in macroporous Ti2 was significantly greater than microporous Ti1 treatments (p=.006). Fusion scores for Ti2 and PEEK demonstrated greater rates of bone formation from 8 to 16 weeks, with bridging rates of 100% for Ti2 at 16 weeks compared to just 88% for PEEK and 50% for Ti1. Biomechanical outcomes significantly improved at 16 versus 8 weeks, with no significant differences between Ti and PEEK with graft. This study demonstrated that macroporous 3D Printed Ti spacers are able to achieve fixation and arthrodesis with complete bone fusion by 16 weeks without the need for bone graft. These significant data indicate that low-modulus 3D Printed titanium interbody cages have similar performance to autograft-filled PEEK, and could be reliably used in spinal fusion avoiding the complications of bone graft harvesting

The Lisfranc fracture dislocation of the tarsometatarsal joint (TMTJ) is a complex injury with a reported incidence of 9.2 to 14/100,000 person-years. Lisfranc fixation involves dorsal bridge plating, transarticular screws, combination or primary arthrodesis. We aimed to identify predictors of poor patient reported outcome measures at long term follow up after operative intervention. 127 patients underwent Lisfranc fixation at our Level One Trauma Centre between November 2007 and July 2013. At mean follow-up of 10.7 years (8.0-13.9), 85 patients (66.92%) were successfully contacted. Epidemiological data including age, gender and mechanism of injury and fracture characteristics such as number of columns injured, direction of subluxation/dislocation and classification based on those proposed by Hardcastle and Lau were recorded. Descriptive analysis was performed to compare our primary outcomes (AOFAS and FFI scores). Univariate analysis and multivariate regression analysis was done adjusted for age and sex to compare the entirety of our data set. P<0.05 was considered significant. The primary outcomes were the American Orthopaedic Foot and Ankle Society (AOFAS) Midfoot Score and the Foot Function Index (FFI). The number of columns involved in the injury best predicts functional outcomes (FFI, P <0.05, AOFAS, P<0.05) with more columns involved resulting in poorer outcomes. Functional outcomes were not significantly associated with any of the fixation groups (FFI, P = 0.21, AOFAS, P = 0.14). Injury type by Myerson classification systems (FFI, P = 0.17, AOFAS, P = 0.58) or open versus closed status (FFI, P = 0.29, AOFAS, P = 0.20) was also not significantly associated with any fixation group. We concluded that 10 years post-surgery, patients generally had a good functional outcome with minimal complications. Prognosis of functional outcomes is based on number of columns involved and injured. Sagittal plane disruption, mechanism and fracture type does not seem to make a difference in outcomes

Aim. Bone infections often manifest with soft tissue complications such as severe scarring, fistulas, or ulcerations. Ideally, their management involves thorough debridement of infected bone and associated soft tissues, along with achieving stable bone structure, substantial tissue coverage, and long-term antibiotic therapy. The formation of a multidisciplinary team comprising orthopedic surgeons, plastic surgeons, and infectious disease specialists is essential in addressing the most complex cases. Method. We conducted a retrospective study during six years (2018-2023) at our university center. Focusing on the most challenging cases, we included patients with bone infections in the leg and/or foot requiring free flap reconstruction. Each patient underwent simultaneous bone debridement and reconstruction by the orthopedic team, alongside soft tissue debridement and free flap reconstruction by the plastic surgery team. Targeted antibiotic therapy for either 6 weeks (acute) or 12 weeks (chronic osteitis) was initiated based on intraoperative cultures. Additional procedures such as allografts, arthrodesis, or autografts were performed if necessary. We analyzed the rates of bone union, infection resolution, and limb preservation. Results. Forty-five patients were enrolled. Twenty-four patients (53.3%) had urgent indications (e.g., open infected fractures, osteitis, acute osteoarthritis, or wound dehiscence), while 21 (46.7%) underwent elective surgery (e.g., septic pseudarthrosis or chronic osteitis). Two patients underwent amputation due to flap failure (4.4%), and one patient was lost to follow-up. Follow-up of the remaining 42 patients averaged 28 months (range: 6–60 months). During this period, 35 patients (83.4%) experienced no recurrence of infection. Similarly, 35 patients (83.4%) achieved bone union. Overall, the rate of lower limb preservation was 93.3%. Conclusions. Managing bone infection coupled with soft tissue defects brings significant challenges. Although the majority of patients treated here belong to a complex framework based on the BACH classification, the outcomes achieved here appear to align with those of the simpler cases, thanks to optimal care with a dedicated septic ortho-plastic team. Our study demonstrates a notable success rate in treating infection, achieving bone consolidation, and preserving lower limb function

Aim. The aim of this systematic review was to assess the existing published data on tuberculous arthritis involving native joints in adults aged 18 years and older. The specific research questions focused on the diagnosis and management of the disease. Method. This study was performed in accordance with the guidelines provided in the Preferred Reporting Items for Systematic reviews and Meta-Analysis extension for Scoping Reviews (PRISMA-ScR). A systematic literature search was undertaken of Pubmed, Web of Science, Scopus and the Cochrane library. Only studies published in English since 1970 were considered. Case series involving less than 10 patients, systematic and narrative reviews, and laboratory or animal studies were excluded. We also excluded reports of TB infections not involving a “native joint” and tuberculosis of the spine. The level of evidence and strength of recommendations was performed in accordance with the GRADE system. Results. The systematic review of the literature yielded 2023 potential sources. Following deduplication, screening and full-text review, 20 data sources involving 573 patients from nine countries, were included. There was considerable variation amongst the studies in terms of the approach to diagnosis and management. The most common method used to confirm the diagnosis was microbiological culture of tissue obtained by biopsy, with positive findings in 93% of cases. Medical management involved a median 12 months of antitubercular treatment (IQR 8–16; range 4–18 months). Duration of pre-operative treatment ranged from two to 12 weeks in duration. Surgery was performed in approximately 87% of patients and varied from arthroscopic debridement to complete synovectomy combined with total joint arthroplasty. When arthroplasty and arthrodesis cases are excluded, 80% of patients received an open or arthroscopic debridement. The mean follow-up time of all studies was 26 months, with most studies demonstrating a minimum follow-up of at least six-months (range 3–112 months). Recurrence rates were reported in most studies, with an overall average recurrence rate of 7,4% (35 of 475). Conclusions. The current literature on TB arthritis highlights the need for the establishment of standardised diagnostic criteria. Further research is needed to define the optimal approach to medical and surgical treatment. The role of early debridement in active tuberculous arthritis needs to be explored further. Specifically, comparative studies are required to address the questions around use of medical treatment alone versus in combination with surgical intervention

Aim. Antibiotics have limited activity in the treatment of multidrug-resistant or chronic biofilm-associated infections, in particular when implants cannot be removed. Lytic bacteriophages can rapidly and selectively kill bacteria, and can be combined with antibiotics. However, clinical experience in patients with surgical infections is limited. We investigated the outcome and safety of local application of bacteriophages in addition to antimicrobial therapy. Method. 8 patients (2 female and 6 male) with complex orthopedic and cardiovascular infections were included, in whom standard treatment was not feasible or impossible. The treatment was performed in agreement with the Article 37 of the Declaration of Helsinki. Commercial or individually prepared bacteriophages were provided by ELIAVA Institute in Tbilisi, Georgia. Bacteriophages were applied during surgery and continued through drains placed during surgery three times per day for the following 5–14 days. Follow-up ranged from 1 to 28 months. Results. Median age was 57 years, range 33–75 years. Two patients were diagnosed with a persistent knee arthrodesis infection, one chronic periprosthetic joint infection (PJI), one cardiovascular implantable electronic device (CIED) infection and four patients with left ventricular assist device (LVAD) infection. The isolated pathogens were multi-drug-resistant Pseudomonas aeruginosa (n=3), methicillin-sensitive Staphylococcus aureus (n=4), methicillin-resistant Staphylococcus aureus (MRSA) (n=1) and methicillin-resistant Staphylococcus epidermidis (MRSE) (n=1). 4 infections were polymicrobial. 5 patients underwent surgical debridement with retention of the implant, 1 patient with PJI underwent the exchange of the prosthesis and one patient with LVAD infection was treated conservatively. All patients received intravenous and oral antibiotic therapy and local application of bacteriophages. At follow-up of 12 month, 5 patients were without signs or symptoms of infection, whereas in one patient with LVAD infection, a relapse was observed with emergence of phage-resistant Pseudomonas aeruginosa. In this patient, no surgical revision was performed. Conclusions. Bacteriophage therapy may represent a valid additional approach, when standard antimicrobial and surgical treatment is not possible or feasible, including in difficult-to-treat infections. In our case series, 5 of 6 patients were infection free after 1 year. Further studies need to address the optimal bacteriophage administration route, concentration, duration of treatment and combination with antimicrobials

Materials & Methods. Chronic osteomyelitis is a complex and challenging condition the successful treatment of which requires a specialist multidisciplinary approach. Prior to tertiary referral to a specialist Orthoplastic Unit, patients often receive multiple courses of antibiotics, in usually unsuccessful attempts, to eradicate infection. This often results in the development of chronic polymicrobial infection. We reviewed the intra-operative cultures of patients treated in our Orthoplastic unit over a 9-year period from 2012–2021 to determine the spectrum of polymicrobial cultures and the relationship to pre-operative cultures. Results. We reviewed the electronic care records and laboratory results of all patients referred to or directly admitted to our unit with a diagnosis of chronic osteomyelitis between 2012–2021. We checked all culture results, antibiotic sensitivities and prescription for treatment. We also checked for any recurrence of infection within 1 year. 60 patients were treated over the 9-year period. 9 upper and 51 lower limbs. The most common referral sources were from the surgical specialties of Trauma & Orthopaedics and Plastic Surgery (62%) while an equal amount came from the Emergency Department and other inpatient medical teams, each making up 15%. A small cohort (8%) developed the infection while still being followed up post fixation. Aetiology of Infection were post fracture fixation 41 (68%), spontaneous osteomyelitis 10 (17%), soft tissue infection 4 (7%). The remaining 5 patients (8%) had a combination failed arthroplasty, arthrodesis and chronic infection from ring sequestrum. 58 patients (97%) had positive cultures with 26 being polymicrobial. 12 cultures were gram negative (G-ve), 11 G+ve 12, 4 anaerobic and 1 Fungal. In 24 patients (40%) the pre-operative cultures and antibiotic sensitivities did not correspond to the intra-operative cultures and sensitivities. 55 patients (92%) required dual or triple therapy with 8% requiring further debridement and extended therapy. 2 (3%) patients had failed treatment requiring amputation. Conclusions. Chronic osteomyelitis is a complex and challenging condition the successful treatment of which requires early referral to a specialist Orthoplastic unit. Less than half of organisms cultured pre-operatively reflect the causative organisms cultured intra-operatively with 52% of these infections being polymicrobial. After initial treatment, 8% of patients will require a further combination of extended antibiotic therapy and surgery to eradicate infection

The purpose of this research was to determine the feasibility of radiostereometric analysis (RSA) as a diagnostic tool for assessing non-union following spinal arthrodesis procedures. Further, to estimate clinical thresholds for precision and accuracy of the proposed method in the cervical and lumbar spine. A three-level lumbo-sacral and a four-level cervical posterior arthrodesis procedures were performed on an artificial spine model (Sawbones, WA). Using a spring loaded inserter (RSA Biomedical, Sweden), eight to ten RSA markers were placed within each of the L4 and L5 segments in the spinous process (L4 only), lamina, transverse processes, posterior and anterior (down the pedicle) wall of the vertebral body. Eight to ten markers were placed within the proximal sacrum (S1) at the medial and lateral crests, tuberosity, and within the sacral canal wall. Four to eight RSA markers were placed into the C3-C6 lateral masses. Titanium screws and rods were applied to the spinal segments. Identical procedures were then performed on a cadaveric spine using similar bead placement and hardware. RSA imaging consisted of 12 double exams (24 exams) of the cervical and lumbar regions for both the Sawbones and cadaveric spine to assess precision of measurement under zero-displacement conditions. The most distal vertebrae were considered the datum against which the movement of all other vertebrae was compared. The artificial spine was then dismantled for accuracy assessment in which the middle vertebrae (L5 and C4-C5) were moved relative to the superior (L4 and C3) and inferior (S1 and C6) vertebrae by known, incremental displacements on an imaging phantom device. Displacements occurred along the superior-inferior, anterior-posterior, and flexion-extension (rotational) axes of motion. RSA images were obtained at each displacement. Image analysis was performed using model-based software (RSACore v3.41, Leiden, Netherlands) to visualize implanted RSA beads in 3-D space. Precision was defined as the 95% confidence interval of error in measuring zero-displacement. Accuracy was defined as the mean difference (with 95% confidence interval) between the known and measured displacement. The rate of RSA bead detection was high with 5–8 implanted beads being visible in both the lumbar and cervical regions of the artificial and cadaveric spines. Translational RSA precision for both spines was better than 0.25 mm and 0.82 mm for the lumbar and cervical regions, respectively. Rotational precision was better than 0.40° and 1.9° for the lumbar and cervical regions, respectively. RSA accuracy for the artificial spine overall demonstrated less than 0.11 mm translational bias (margin < ±0.02 mm) and less than 0.22° rotational bias (margin < ±0.15°). This study demonstrates that RSA achieves sufficient precision and accuracy to detect intervertebral micromotion for the purpose of assessing arthrodesis. Well dispersed RSA bead placement is critical to achieving sufficient accuracy as well as avoiding occlusion by metal hardware. Cervical bead implantation is particularly sensitive to bead clustering due to small vertebrae size and proximity to critical structures. The results of this work will aid in the development of a clinical study to assess arthrodesis in patients