Isolated Greater Tuberosity (GT) fractures were described as separate entities from proximal humeral fractures more than 100 years ago. However, there is limited literature available about the functional outcome of the two different types of GT fractures: avulsed and comminuted. To compare functional outcomes of the 2 different types of Greater Tuberosity fractures; simple and comminuted and to determine how these outcomes were affected by associated injuries such as shoulder dislocation and rotator cuff tear. We also looked at the acceptable post fixation displacement of GT fracture and when to consider it mal-reduction (malunion due to over or under reduction) and the acceptable time frame to delay the fixation and still get satisfactory results. We looked at Greater Tuberosity fractures of the humerus in Waikato Hospital between 1999–2009. Radiographs were reviewed by senior Author to classify them into simple and comminuted. Measurements were done by senior Author for post fixation displacement. Operative notes checked by the authors, when in doubt, double-checked by senior author. Outcome scores used: UCLA, ASES and oxford scores to compare functional outcome. We also measured the time off work and time on ACC (Physiotherapy), as well as period of follow up. A total of 35 patients were included in the final analysis were treated operatively. Mean age of the patients was 51 years. M/F ratio was 3/2. Mechanism of injury was predominantly direct force applied to that shoulder. Shoulder dislocation was found in around 77% of patients. Methods of fixation included tension band wiring with or without screws, rotator cuff repair and one T-plate. Follow up time was shorter for simple comminuted fractures (22 v 44 weeks respectively). Outcome scores for patients who sustained simple fractures were slightly higher than those with comminuted fractures but the difference did not reach statistical significance. The groups with dislocation and rotator cuff tear did worse than the other groups in all aspects of the study. Post fixation displacement of GT of less than 5 mm led to a significantly better outcome than displacement of 5mm plus. Better results were obtained when the time between injury and operation was less than 2 weeks. The comminuted group had similar functional outcome to the other group but required much longer follow up. Worse outcome should be expected with dislocation and rotator cuff tear associated with GT fracture. Satisfactory results relate to degree of displacement post fixation of <5 mm. Delay of fracture fixation of >2 weeks results in a less favourable outcome

A fracture of the tuberosity is associated with 16% of anterior glenohumeral dislocations. Manipulation of these injuries in the emergency department is safe with less than 1% risk of fracture propagation. However, there is a risk of associated neurological injury, recurrent instability and displacement of the greater tuberosity fragment. The risks and outcomes of these complications have not previously been reported. The purpose of this study was to establish the incidence and outcome of complications associated with this pattern of injury.

We reviewed 339 consecutive glenohumeral dislocations with associated greater tuberosity fractures from a prospective trauma database. Documentation and radiographs were studied and the incidence of neurovascular compromise, greater tuberosity fragment migration and intervention and recurrent instability recorded.

The mean age was 61 years (range, 18–96) with a female preponderance (140:199 male:female). At presentation 24% (n=78) patients had a nerve injury, with axillary nerve being most common (n=43, 55%). Of those patients with nerve injuries 15 (19%) did not resolve. Greater tuberosity displacement >5mm was observed in 36% (n=123) of patients with 40 undergoing acute surgery, the remainder did not due to comorbidities or patient choice. Persistent displacement after reduction accounted for 60 cases, later displacement within 6 weeks occurred in 63 patients. Recurrent instability occurred in 4 (1%) patients. Patient reported outcomes were poor with average EQ5D being 0.73, QDASH score of 16 and Oxford Shoulder Score of 41.

Anterior glenohumeral dislocation with associated greater tuberosity fracture is common with poor long term patient reported outcomes. Our results demonstrate there is a high rate of neurological deficits at presentation with the majority resolving spontaneously. Recurrent instability is rare. Late tuberosity fragment displacement occurs in 18% of patients and regular follow-up for 6 weeks is recommended to detect this.

Shoulder arthroplasty procedures continue to increase in prevalence and controversy still remains about the optimal method to manage the subscapularis. Scalise et al. performed an analysis of 20 osteotomies and 15 tenotomy procedures, and found the tenotomy group had a higher rate of abnormal subscapularis tendons on ultrasound examination. There was one tendon rupture in the subscapularis tenotomy group and no ruptures in the osteotomy group. Jandhyala et al. retrospectively examined 26 lesser tuberosity osteotomies and 10 subscapularis tenotomies for arthroplasty, and their study demonstrated a significant improvement in the belly press test for the osteotomy group. Lapner et al. performed a randomised controlled trial assigning patients to either a lesser tuberosity osteotomy or a subscapularis peel procedure. They evaluated 36 osteotomies and 37 subscapularis peels. The outcomes evaluated were Dynamometer internal rotation strength, the Western Ontario Osteoarthritis of the Shoulder Index (WOOS) score and American Shoulder and Elbow Surgeons (ASES) score, and in a subsequent paper they evaluated the healing rates and Goutallier grade. Their studies illustrated no difference in the internal rotation strength between groups. Both groups significantly improved WOOS and ASES scores postoperatively, but the difference was not significant between groups. Goutallier grade increased significantly in both groups, but there was no significant difference between the groups. Overall, the different approaches have not demonstrated a meaningful clinical difference. Further studies are needed to help understand issues leading to subscapularis complications after arthroplasty.

Distal femoral physeal fractures can cause of growth distrurbance which frequently requires further surgical intervention. The aim of this study was to determine if tibial tuberosity ossification at the time of injury can predict further surgery in patients who have sustained a physeal fracture of the distal femur.

We retrospectively investigated all patients who had operative treatment for a distal femoral physeal fracture at a paediatric level one trauma center over a 17 year period. Logistic regression analysis was performed investigating associations between the need for further surgery to treat growth disturbance and tibial tuberosity ossification, age, Salter Harris grade, mode of fixation or mechanism of injury.

74 patients met the inclusion criteria. There were 57 boys (77%) and 17 girls (23%). The average age at time of injury was 13.1 years (range 2.-17.1 years). Following fixation, 30 patients (41%) underwent further surgery to treat growth disturbance. Absence of tibial tuberosity fusion to the metaphysis was significantly associated with need for further surgery (p = < 0 .001). Odds of requiring secondary surgery after tibial tuberosity fusion to metaphysis posteriorly (compared with not fused) were 0.12, 95% CI (0.04, 0.34). The estimate of effect of tibial tuberosity ossification on reoperation rates did not vary when adjusted for gender, mechanism, fixation and Salter Harris grade. When accounting for age, the odds of further operation if the tibial tuberosity is fused to the metaphysis posteriorly (compared with not fused) were 0.28, 95% CI (0.08, 0.94).

Tibial tuberosity ossification stage at time of injury is a predictor of further surgery to treat growth disturbance in paediatric distal femoral fractures. Children with distal femoral physeal fractures whose tibial tuberosity was not fused to the metaphysis posteriorly were 8.3 times more likely to require further surgery.

Subscapularis tenotomy (SST) has been the preferred approach for shoulder arthroplasty for decades but recent controversy has propelled lesser tuberosity osteotomy (LTO) as a potential alternative. Early work by Gerber suggested improved healing and better outcomes with LTO although subscapularis muscular atrophy occurred in this group as well with unknown long-term implications. However, we previously performed a biomechanical study showing that some of the poor results following tenotomy may have been due to historic non-anatomic repair techniques. Surgical technique is critical to allow anatomic healing – this is true of both SST or LTO techniques. A recent meta-analysis of biomechanical cadaveric studies showed that LTO was stronger to SST at “time-zero” with respect to load to failure but there were no significant differences in cyclic displacement.

A recent study evaluated neurodiagnostic, functional, and radiographic outcomes in 30 patients with shoulder arthroplasty who had SST. The authors found that the EMG findings were normal in 15 patients but abnormal in the other 15 and that these abnormalities occurred in 5 muscle groups (not just the subscapularis). In another study, patient outcomes were inferior in those patients who had documented subscapularis dysfunction following SST compared to patients who had LTO (none of whom had subscap dysfunction). The literature is not clear, however, on ultimate outcomes based on subscapularis dysfunction post-arthroplasty with some studies showing no difference and others showing significant differences.

Previous studies describing drill trajectory for single incision distal biceps tendon repair suggest aiming ulnar and distal (Lo et al). This suggests that the starting point of the drill would be anterior and radial to the anatomic insertion of the distal biceps tendon. Restoration of the anatomic footprint may be important for restoration of normal strength, especially as full supination is approached.

To determine the safest drill trajectory for preventing injury to the posterior interosseous nerve (PIN) when repairing the distal biceps tendon to the ANATOMIC footprint through a single-incision anterior approach utilising cortical button fixation.

Through an anterior approach in ten cadaveric specimens, three drill holes were made in the radial tuberosity from the centre of the anatomic footprint with the forearm fully supinated. Holes were made in a 30º distal, transverse and 30º proximal direction. Each hole was made by angling the trajectory from an anterior to posterior and ulnar to radial direction leaving adequate bone on the ulnar side to accommodate an eight-millimetre tunnel. Proximity of each drill trajectory to the PIN was determined by making a second incision on the dorsum of the proximal forearm. A K-wire was passed through each hole and the distance between the PIN and K-wire measured for each trajectory.

The PIN was closest to the trajectory K-wires drilled 30° distally (mean distance 5.4 mm), contacting the K-wire in three cases. The transverse drill trajectory resulted in contact with the PIN in one case (mean distance 7.6 mm). The proximal drill trajectory appeared safest with no PIN contact (mean distance 13.3 mm). This was statistically significant with a Friedman statistic of 15.05 (p value of 0.00054).

When drilling from the anatomic footprint of the distal biceps tendon the PIN is furthest from a drill trajectory aimed proximally. The drill is aimed radially to minimise blowing out the ulnar cortex of the radius.

For any reader inquiries, please contact vansurgdoc@gmail.com

We performed an advancement and medial transfer of the tibial tuberosity based on Fulkerson's principle to treat intractable anterior knee pain associated with patellofemoral maltracking diagnosed by dynamic MRI.

Between January 1998 and July 2000 twenty-two patients had 28 knees operated for anterior knee pain. There were 4 men and 18 women with a mean age of 28 years (range 18-41). Indications for surgery were [a] failure to improve after six months of physiotherapy and [b] patellofemoral maltracking evident in dynamic MRI. Mean follow-up was for 37 months (23 – 42). Knee instability score modified by Fulkerson was employed for objective and subjective assessment.

Objectively 22 (79%) knees achieved good to excellent results. Four knees (14%) had fair, and two (7%) had poor results. Excellent and very good results were seen in 20 knees. These patients were a younger age group (mean age 21 years) and had minimal degeneration (grade I-II) of the patellofemoral joints. Two patients achieved good results. One of them had moderate (grade III) and one minimal (II) arthritis. Three knees with fair results had advanced (grade IV or V) and one had moderate (grade III) arthritis. Out of two patients who had a poor result, one had advanced degeneration (grade V) that later required a patellofemoral joint resurfacing. The other was a 24 year old woman with grade II changes. She was treated by the pain therapy team.

Anterior displacement of the tuberosity in the presented study was kept to 5 mm to avoid the possible complications of wound break down. The overall length and depth of the osteotomy was also reduced to minimise risk of fracture and commence early mobilisation.

Based on our results there is a strong case of justification for Anteromedialisation of tibial tuberosity using a smaller length of osteotomy and lesser degree of anteriorisation in carefully selected patients with Patellofemoral arthralgia associated with maltracking patella.

The aim of the study was to assess the rate of greater tuberosity non union in reverse shoulder arthroplasty performed for proximal humerus fractures and to assess if union is related to type of fracture or the intraoperative reduction of the greater tuberosity.

All cases of reverse shoulder arthroplasty for proximal humerus fractures at our institution over a three year period were retrospectively reviewed from casenotes and radiologically and the position of the greater tuberosity was documented at immediate post op, 6 months and 12 months. Any malunion or non union were noted.

A total of 27 cases of reverse shoulder arthroplasty for proximal humeral fractures were identified. 4 cases did not have complete follow up xrays and were excluded from analysis. The average age at operation of the cohort of the 23 remaining patients was 79 years (range 70–91). The greater tuberosity was anatomically well positioned intraoperatively in 17 of the 23 cases.

At the end of 12 months there were 4 cases of tuberosity non union (17%), all except one occurring in poorly intraoperatively positioned greater tuberosity. 50% (3 out of 6) of greater tuberosities displaced further and remained ununited if the intraoperative position was poor. Only 6% (1 out of 17) greater tuberosities did not unite if the greater tuberosities was reduced anatomically. Intra operatively position of the greater tuberosity was strongly associated with their union (Fischer's exact test p<0.05). Union of greater tuberosity was not statistically associated with fracture pattern (Fischer's exact test p=0.48).

Our case series show a low rate of tuberosity malunion after reverse shoulder arthroplasty for proximal humerus fracture. Good positioning and fixation of the greater tuberosity intra operatively is a strong predictor of their uneventful union to shaft.

Purpose

Controversy exists regarding the optimal technique of subscapularis mobilization during shoulder arthroplasty. The purpose of this multicentre randomized double-blind study was to compare the functional outcomes and healing rates of the lesser tuberosity osteotomy (LTO) to the subscapularis tenotomy (ST).

Introduction

Surgical fixation of greater tuberosity fractures in the shoulder is the choice of treatment even if the fragment is minimally displaced. This helps to reduce the incidence of impingement secondary to a malunited tuberosity fragment especially in younger patients. We evaluated the functional outcome of our patients treated with open reduction and internal fixation of these fractures using cancellous screws.

Purpose

The literature indicates that the tibial component in total knee arthroplasty (TKA) should be placed in internal rotation not exceeding 18 to the line connecting the geometrical center of the proximal tibia and the middle of the tibial tuberosity. These landmarks may not be easily identifiable intraoperatively. Moreover, an angle of 18 is difficult to measure with the naked eye.

Subscapularis function following Total shoulder joint replacement has been a concern in recent literature. It has been postulated that lesser tuberosity osteotomy approach may have better Subscapularis function than transtendonous approach.

To assess whether lesser tuberosity osteotomy vs. subscapularis tenotomy is better for post-operative function of subscapularis in total shoulder replacements done by a single surgeon in a District general hospital.

117 shoulder replacements performed by the senior author (TH) at Waikato district general hospital between years January 2002 to January 2010 were reviewed retrospectively. Revision replacement, inverse shoulder replacement & acute traumatic hemiarthroplasty were excluded. Patients with previous rotator cuff problems, previous surgery to subscapularis, rheumatoid arthritis and post-trauma sequelae were also excluded from the study. Inclusion criteria were normal subscapularis function and intact subscapularis on MRI pre-operatively.

41 shoulders were eligible to participate in study of which 1 pt died (bilateral TSR), 1 pt unfit to participate due to cervical disc problems. Of remaining 38 shoulders 11 shoulders had transtendonous and 27 shoulders had lesser tuberosity osteotomy approach. 37 shoulders were reviewed clinically for range of motion of the shoulder and subscapularis strength. Range of motion and subscapularis strength was significantly higher in the osteotomy group. All osteotomies were united on axillary radiograph.

Lesser tuberosity osteotomy approach result in better subscapularis function than transtendonous approach.

Abstract. Reverse shoulder arthroplasty (RSA) is being increasingly used for complex, displaced fractures of the proximal humerus. The main goal of the current study was to evaluate the functional and radiographic results after primary RSA of three or four-part fractures of the proximal humerus in elderly patients. Between 2012 and 2020, 70 consecutive patients with a recent three- or four-part fracture of the proximal humerus were treated with an RSA. There were 41 women and 29 men, with a mean age of 76 years. The dominant arm was involved in 42 patients (60%). All surgeries were carried out within 21 days. Displaced three-part fracture sustained in 16 patients, 24 had fracture dislocation and 30 sustained a four-part fracture of the proximal humerus. Patients were followed up for a mean of 26 months. The mean postoperative OSS at the end of the follow-up period was 32.4. The mean DASH score was 44.3. Tuberosity non-union occurred in 18 patients (12.6%), malunion in 7 patients (4.9%), heterotopic ossification in 4 patients (2.8%) and scapular notching in one patient. Anatomical reconstruction was achieved in 25 patients (17.5%), the influence of greater tuberosity healing on shoulder function could not be demonstrated. Heterotopic ossification seems to affect OSS and QDASH, we found statistically significant relation between HO and clinical outcomes. Patients with heterotopic ossification had significantly lower postoperative scores on DASH and OSS (P = .0527). Despite expecting good functional outcome with low complication rate after RSA, the functional outcome was irrespective of healing of the tuberosities

Reverse shoulder arthroplasty is becoming a frequent treatment of choice for patients with shoulder disorders. Complication rates after reverse shoulder arthroplasty may be three-fold that of conventional total shoulder arthroplasty especially in high risk patient populations and diagnoses like revision arthroplasty, fracture sequelae, and severe glenoid bone loss. Complications include component malposition, stiffness, neurological injury, infection, dislocation or instability, acromial or scapular spine fractures, scapular notching, and loosening of implants. Recognition of preoperative risk factors and appropriate 3D planning are essential in optimizing patient outcome and intraoperative success. Failure of reverse shoulder arthroplasty is a significant challenge requiring appropriate diagnosis of the failure mode. The most common neurological injuries involve the brachial plexus and the axillary nerve due to traction, manipulation of the arm, aberrant retractor placement, or relative lengthening of the arm. Intraoperative fractures are relatively uncommon but include the greater tuberosity, acromion, and glenoid. Tuberosity fracture can be repaired intraoperatively with suture techniques, glenoid fractures may be insignificant rim fractures or jeopardise baseplate fixation and require abandoning RSA until glenoid fracture ORIF heals and then a second stage RSA. Periprosthetic infection after RSA ranges from 1 to 10% and may be higher in revision cases and frequently is Propionibacterium acnes and Staphylococcus epidermidis. Dislocation was one of the most common complications after RSA approximately 5% but with increased surgeon experience and prosthetic design, dislocation rates are approaching 1–2%. An anterosuperior deltoid splitting approach has been associated with increased stability as well as subscapularis repair after RSA. Scapular notching is the most common complication after RSA. Notching may be caused by direct mechanical impingement of the humerosocket polyethylene on the scapular neck and from osteolysis from polyethylene wear. Sirveaux classified scapular notching based on the defect size as it erodes behind the baseplate towards the central post. Acromial fractures are infrequent but more common is severely eroded acromions from CTA, with osteoporosis, with excessive lengthening, and with superior baseplate screws that penetrate the scapular spine and create a stress riser. Nonoperative care is the mainstay of acromial and scapular spine fractures. Recognizing preoperative risk factors and understanding component positioning and design is essential to maximizing successful outcomes

Management of 4-part fractures of the proximal humerus continues to challenge orthopaedic surgeons, shoulder surgeons, and trauma surgeons. Truly displaced 4-part fractures typically require surgery if the patient is medically able to undergo a surgical procedure. However, outcomes following surgery are not always as predictable as we would like. Results following hemiarthroplasty have led to more predictable pain relief than predictable functional recovery relying exclusively on the fate of tuberosity healing. Tuberosity healing failure leads to nearly universal catastrophic results with pain, dysfunction, and pseudoparalysis. Furthermore, conversion of failed hemiarthroplasty to reverse total shoulder arthroplasty leads to the highest incidence of complications and poorest outcomes of all groups of patients undergoing reverse total shoulder replacement. This is countered by the knowledge that if tuberosity healing occurs the outcome can be reliable with regard to pain relief and functional restoration. Reverse total shoulder arthroplasty, on the other hand, has emerged as a preferred surgical option for many surgeons due to the issues following hemiarthroplasty. The increased prevalence of RTSA for the management of 4-part fractures has come without overwhelming evidence that outcomes are superior especially in light of the increased cost, life-time weight bearing restrictions, and uncertain long-term durability. Long-term follow-up of patients treated with RTSA for 4-part fracture has shown concerning degradation of function and outcomes and remains a valid concern about the long-term durability. We must remain diligent therefore in continuing to better understand which fractures should be treated non-operatively and those that may be amenable to anatomic hemiarthroplasty and finally those which may be better served by using a reverse total shoulder replacement

General Principles - All repairs should be repaired in full extension. Repairs should be immobilised in full extension for 6–12 weeks. Gradual resumption of motion in a hinged brace over an additional 6–8 weeks almost always yields flexion to at least 90 degrees. Marlex Mesh has been shown to be an excellent replacement as well as an augment for deficient soft tissue. Acute Tibial Tuberosity Avulsion - Open repair is best accomplished with a non-absorbable heavy Krackow suture, secured distally around a screw and washer followed by 6 to 8 weeks of immobilisation. Augmentation with a semitendinosus graft or Marlex can provide additional support. Acute Patella Tendon Rupture - End-to-end repair is standard, but re-rupture is not uncommon, so supplemental semitendinosus reconstruction is recommended. The tendon is harvested proximally, left attached distally and passed through a transverse hole in the inferior patella. The gracilis tendon can be harvested and sutured to semitendinosus for additional length, if needed. Acute Quadriceps Tendon Rupture - These can be repaired end to end with a non-absorbable heavy Krackow suture. A superficial quadriceps fascial turndown or mesh may be a useful adjunct. Patella Fracture - Treatment depends on the status of the patellar component and the loss of active extension. If the component remains well fixed and the patient has less than a 20-degree lag. A loose component and/or >20-degree extensor lag requires ORIF +/− component revision. Chronic Disruptions - While standard repair techniques are possible, tissue retraction usually prevent a “tension-free” repair. If the patella remains viable and has not retracted proximally an Achilles tendon graft is appropriate while in any patellar tendon defect, mesh repair has been shown to be effective. In most chronic disruptions with loss of the patella allograft extensor mechanism reconstruction may be considered

Introduction:. Tuberosity healing is strongly correlated with functional results in all series of three- and four-part fractures of the proximal humerus treated by hemiarthroplasty. We formed a working group to improve position of the implant and fixation of the tuberosities on an implant specifically intended for traumatology. Material and Methods:. An anatomic study on 11 cadavers and a prospective multicentre clinical study of 32 cases were performed to validate extrapolable original solutions at the patient scale: placement of the stem at a height indicated in relation to the insertion of the clavicular bundle of the pectoralis major, locking of the stem, placement (based on bone quality) of a variable volume metaphyseal frame (offset modular system® OMS®), avoiding medialisation of the tuberosities, and fixation of the tuberosities using strong looped sutures, brightly coloured so that they can be located more easily. Evaluation by Dash score and Constant score was correlated with positioning of the tuberosities using radiographs. Results:. The clinical study enabled a distance of the top of the head to pectoralis major of 5.5 cm +/− 5 mm to be determined, confirming the results of the anatomic study and data from the literature. The distal double-locking ancillary device and the suturing technique for the tuberosities using looped sutures was judged to be effective by all of the surgeons. 23 patients (5 males, 9 CT4 and 8 CT3) with an mean age 69,6 (33–90) were operated on by 3 senior surgeons and reviewed at a mean follow-up of 17,3 months (6–24). All patients were seen again at 3 months and 6 months and the average motion at last follow was abduction of 90,7° (140–40), active anterior elevation of 113,25° (160–60), and external rotation of 43,2°(55–30). One complication was noted: inadequate position of a locking screw. In the 17 patients operated without oms® 50% had adequate initial positioning of the tuberosities and 10% secondary displacement. In comparison the 6 patients operated with the oms® 100% had adequate initial positioning of the tuberosities and no secondary displacement occurred. Discussion:. The series from Sofcot, Boileau, and more recently Reuther yielded results of 40 to 66% malposition or nonunion of the tuberosities. The initial clinical results from our series are encouraging and demonstrate that using a variable volume metaphyseal frame in synthesis of the tuberosities with control of the height of the implant is reliable. This multicentre study should be extended by a more long-term analysis

Aims

Early large treatment effects can arise in small studies, which lessen as more data accumulate. This study aimed to retrospectively examine whether early treatment effects occurred for two multicentre orthopaedic randomized controlled trials (RCTs) and explore biases related to this.

Purpose:. Tuberosity healing in hemiarthroplasty for proximal humerus fractures remains problematic. Improved implant design and better techniques for tuberosity fixation have not been met with improved clinical results. The etiology for tuberosity failure is multifactorial; however thermal injury to host bone is a known effect of using polymethylmethacrylate for implant fixation. We hypothesized that the effect of thermal injury at the tuberosity shaft junction could be diminished by utilizing an impaction grafting technique for hemiarthroplasty stems. Methods:. Five matched pairs of cadaveric humeri were skeletonized and hemiarthroplasty stems were implanted in the proximal humeri in two groups. The first group had full cementation utilized from the surgical neck to 2 cm distal to the stem (cement group) and the second group had distal cementation with autologous cancellous bone graft impacted in the proximal 2.5 cm of the stem (impaction grafting group). Thermocouples were used to measure the inner cortical temperature at the tip of the stem, surgical neck, and at the level of the cement-graft interface for both treatment groups (see Fig. 1). Experiments were initiated with the humeri fully submerged in 0.9% sodium chloride and all three thermocouples registering a temperature of 37 ± 1°C. Statistical analyses were performed with a one-sided, paired t-test. Results:. The maximum recorded cortical bone temperature at the surgical neck was significantly decreased by 23% from 52.4 ± 8.1°C in the cement group to 40.4 ± 4.8°C in the impaction grafting group (p = 0.037). We identified no significant differences in maximum recorded temperature at the cement-graft interface between the impaction grafting group (44.3 ± 6.3°C) and the cement group (47.4 ± 6.4°C) (p = 0.254). A similar finding was observed between groups at the tip of the hemiarthroplasty stem (impaction grafting group 54.2 ± 5.7°C; cemented group 52.3 ± 7.3°C, p = 0.303). Conclusion:. Given the known threshold of 47°C as the onset of permanent thermal injury to bone,. 1. impaction grafting maintains the temperature at the surgical neck during cementation below this critical value. Impaction grafting may serve as a beneficial surgical technique to mitigate the effects of thermal injury on tuberosity healing in proximal humeral hemiarthroplasty for fracture

We present a series of 18 consecutive cases of primary reverse total shoulder arthroplasty for irreparable proximal humerus fractures in patients over 70. Failure of tuberosity union and poor cuff function leads to unsatisfactory results in over half the patients with hemiarthroplasty. Reverse total shoulder arthroplasty does not depend upon a functional rotator cuff and requires little formal rehabilitation. Patients over 70 with irreparable proximal humerus fractures treated with a reverse total shoulder arthroplasty were included in this study. Only primary arthroplasties were included. Reverse arthroplasties for failed hemiarthroplasties were excluded. All arthroplasties were performed using either a deltoid split direct lateral (superior) approach or the antero-lateral MacKenzie approach. The SMR reverse total shoulder prothesis was implanted in all cases using a press-fit glenoid base plate and glenosphere, and press-fit or cemented humerus stem. Tuberosity repair was attempted in 10 cases. The supraspinatus was excised from the greater tuberosity. Patients were allowed self-mobilisation after two weeks in a sling. Patients were recruited and followed up per ethics approved protocol. Outcome measures used were range of motion, dislocation and revision rates radiological signs of loosening and glenoid notching, DASH and Constant scores. Results were compared to another series of cases of reverse shoulder arthroplasty for sequelae of trauma and failed hemiarthroplasties, as well as a series of primary hemiarthroplasties. At an average follow-up of 30 months (minimum 12 months) all patients were satisfied with their results. Average forward elevation was 132 deg. and abduction 108 deg. There was not deterioration of movement at 12 or 24 months. No patient had ongoing pain. The average constant score was 62. There was no evidence of humeral stem loosening apart from one case of early subsidence in a press fit stem. Eleven cases showed glenoid notching, four Nerot grade 1, six Nerot grade 2 and one Nerot grade 3. All notching had stabilised after 12 months. There were no cases of dislocation. No case needed revision, or awaits revision. All cases were pain-free at last review. Overall results for this group of primary reverse arthroplasties for fractures was much better than for reverse arthroplasties for sequelae of trauma. The results were also better than for primary hemiarthroplasties. Irreparable three and four part fractures of the proximal humerus pose management challenges in the elderly. The reverse total shoulder arthroplasty is very attractive option for elderly patients with irreparable proximal humerus fractures. They require little rehabilitation and can give reproducibly good functional results, which do not deteriorate with time