Aim: To determine whether isolated lesions of the glenoid labrum or capsulolabral lesios influence anterior and inferior shoulder stability in a cadaver model that leaves all other glenohumeral structures, including the capsule, intact. Methods: Sequential arthroscopic resection of the labrum was performed with a motorized shaver in seventeen fresh cadaver shoulders. A capsulolabral dehiscence was created arthroscopically in another eleven fresh cadaver shoulders. The capsulolabral complex was divided into five zones: from superior to posterior. Inferior and anterior stability were tested before and after each cutting step. Results: The hyper-abduction test showed progressive increase in abduction with each step, with a maximum of 120° reached after removal of the labrum in all four zones or after detachment of all zones. Resection of the superior to inferior labrum maximally resulted in subluxation, but not in dislocation of the shoulder. Capsulolabral dehiscence of all but the posterior zones resulted in a locked (6/11) or a metastable (4/11) dislocation. In the other specimens the posterior zone needed to be detached as well for a metastable dislocation. Conclusion: Purely labral lesions and limited capsulolabral detachments do not seem to be sufficient to allow the humeral head to dislocate. Labral tears can therefore be debrided without consequences for shoulder stability. In the present study, a capsulolabral detachment in the antero-inferior zone (the typical Bankart lesion) does not allow the humeral head to dislocate. This leads us to suggest that associated lesions must exist in chronic instability

Aim: Retrospective evaluation of the clinical results of arthroscopic capsulolabral stabilisation using suture anchors with a mattress technique.

Materials and Methods: Sixty five consecutive procedures in sixty-two patients (50 male, 12 female) with mean age of 38 years (14–66) underwent capsulolabral stabilisation by the senior author between 2005 and 2008. There was a history of dislocation in 38 shoulders (58.4%), 16(42.6%) had recurrent and 6 bilateral instability, 27 patients (41.5% shoulders) presented with pain. Thirteen patients had gradual onset and 14 after an injury. The mean follow up was 29 months (14–54).

Results: Arthroscopic findings included three patients (5%) with glenoid bone loss more than 15%, Hill Sachs lesions greater than 20% in eighteen patients (27.6%) and six cases where the torn labrum was partially absent. Three shoulders had a panlabral tear (4.4%). A mean of 2.3 (1–4) anchors were used. The mean Rowe score was 92.3 (30–100) with 90% excellent or good and the mean Oxford Score was 41(16–48) with 89% excellent or good. All heavy manual workers returned to work in a mean of 15.4 weeks. Four professional athletes are back to preinjury level in a mean of twenty weeks. There were two (3%) failures with redislocation.

Conclusion: Reinforcement of labral repair with capsule plication is an effective means to treat shoulder instability with a 97% success rate and no exclusion criteria.

Purpose

The remplissage procedure may be performed as an adjunct to Bankart repair to address an engaging Hill-Sachs defect. Clinically, it has been reported that the remplissage procedure improves joint stability but that it may also restrict shoulder range of motion. The purpose of this biomechanical study was to examine the effects of the remplissage procedure on shoulder motion and stability. We hypothesized that the remplissage procedure would improve stability and prevent engagement but may have a deleterious effect on motion.

Aim: To study the contribution of humeral avulsion of the glenohumeral ligaments (HAGL) to shoulder instability. Methods: In fourteen fresh cadaver shoulders a selective cutting sequence was performed. After each section an abduction-external rotation manoeuvre with axial compression and translation was carried out to provoke dislocation. The resulting instability was graded on a scale of five, ranging from no translation to a locked dislocation. Results: Cutting of only the inferior glenohumeral ligament complex resulted at the most in increased translation, but not in subluxation. For subluxation to occur, at least the middle glenohumeral ligament needed to be cut. The entire humeral capsuloligamentous complex needed to be sectioned before subluxation or dislocation occurred. In half of the cases an additional lesion of the subscapularis or the latissimus dorsi is necessary to allow a locked antero-inferior dislocation. Conclusion: Extensive damage to the humeral side of the capsulo-ligamentous complex and, frequently, associated lesions of the subscapularis or latissimus dorsi muscles are necessary to allow dislocation. This might be the primary reason for the low incidence of HAGL observed in clinical series of shoulder instability

Aims

Patients with recurrent anterior dislocation of the shoulder commonly have an anterior osseous defect of the glenoid. Once the defect reaches a critical size, stability may be restored by bone grafting. The critical size of this defect under non-physiological loading conditions has previously been identified as 20% of the length of the glenoid. As the stability of the shoulder is load-dependent, with higher joint forces leading to a loss of stability, the aim of this study was to determine the critical size of an osseous defect that leads to further anterior instability of the shoulder under physiological loading despite a Bankart repair.

Glenohumeral joint injuries frequently result in shoulder instability. However, the biomechanical effect of cartilage loss on shoulder stability remains unknown. The aim of the current study was to investigate biomechanically the effect of two severity stages of cartilage loss in different dislocation directions on shoulder stability. Joint dislocation was provoked for 11 human cadaveric glenoids in seven different dislocation directions between 3 o'clock (anterior) to 9 o'clock (posterior) dislocation. Shoulder stability ratio (SSR) and concavity gradient were assessed in intact condition, and after 3 mm and 6 mm simulated cartilage loss. The influence of cartilage loss on SSR and concavity gradient was statistically evaluated. Between intact state and 6 mm cartilage loss, both SSR and concavity gradient decreased significantly in every dislocation direction (p≤0.038), except the concavity gradient in 4 o'clock dislocation direction (p=0.088). Thereby, anterior-inferior dislocation directions were associated with the highest loss of SSR and concavity gradient of up to 59.0% and 49.4%, respectively, being significantly higher for SSR compared to all other dislocation directions (p≤0.04). The correlations between concavity gradient and SSR for pooled dislocation directions were significant for all three conditions of cartilage loss (p<0.001). From a biomechanical perspective, articular cartilage of the glenoid contributes significantly to the concavity gradient, correlating strongly with the associated loss in glenohumeral joint stability. The highest effect of cartilage loss was observed in anterior-inferior dislocation directions, suggesting that surgical intervention should be considered for recurrent shoulder dislocations in the presence of cartilage loss

Osteochondral glenoid loss is associated with recurrent shoulder instability. The critical threshold for surgical stabilization is multidimensional and conclusively unknown. The aim of this work was to provide a well- measurable surrogate parameter of an unstable shoulder joint for the frequent anterior-inferior dislocation direction. The shoulder stability ratio (SSR) of 10 paired human cadaveric glenoids was determined in anterior-inferior dislocation direction. Osteochondral defects were simulated by gradually removing osteochondral structures in 5%-stages up to 20% of the intact diameter. The glenoid morphological parameters glenoid depth, concavity gradient, and defect radius were measured at each stage by means of optical motion tracking. Based on these parameters, the osteochondral stability ratio (OSSR) was calculated. Correlation analyses between SSR and all morphological parameters, as well as OSSR were performed. The loss of SSR, concavity gradient, depth and OSSR with increasing defect size was significant (all p<0.001). The loss of SSR strongly correlated with the losses of concavity gradient (PCC = 0.918), of depth (PCC = 0.899), and of OSSR (PCC = 0.949). In contrast, the percentage loss based on intact diameter (defect size) correlated weaker with SSR (PCC=0.687). Small osteochondral defects (≤10%) led to significantly higher SSR decrease in small glenoids (diameter <25mm) compared to large (≥ 25mm) ones (p ≤ 0.009). From a biomechanical perspective, the losses of concavity gradient, glenoid depth and OSSR correlate strong with the loss of SSR. Therefore, especially the loss of glenoidal depth may be considered as a valid and reliable alternative parameter to describe shoulder instability. Furthermore, smaller glenoids are more vulnerable to become unstable in case of small osteochondral loosening. On the other hand, the standardly used percentage defect size based on intact diameter correlates weaker with the magnitude of instability and may therefore not be a valid parameter for judgement of shoulder instability

The laterjet procedure is an important option in both primary and revision surgeries, especially in anterior shoulder instabilities that progress with glenoid bone loss. 12 patients who had a history of unsuccessful arthroscopic bankart repair and who underwent laterjet procedure in Ankara Atatürk Research and Training Hospital between 2013 and 2017 were included in the study and the patients were evaluated retrospectively. The mean age of the patients was calculated as 27.7 (range 21 to 38 years). Rowe and Walch-Duplay scores and operated shoulder (OS)-healthy shoulder (HS) range of motion (ROM) measurements were used to evaluate patients clinically and functionally. The mean follow-up time of the patients was calculated as 5.5±1.8 years. Firstly, no dislocation history was recorded in any patient afer the laterjet procedure. The mean Rowe score was calculated as 82.5 (range 60–100). Accordingly, 8 patients had excellent result, 3 patients had good result and 1 patient had fair result. The mean Walch-Duplay score was 81.4 (range 55–100). It was determined as excellent result in 6 patients, good result in 4 patients and fair result in 2 patients. Another data, joint ROM of the OS-HS of patients are shown in the table. There was some limitation in OS compared to the HS. p<0.05 value was accepted as statistically significant. While there was a statistically significant difference in external rotation (OS:35.2º, HS:56.4º)(p=0.003), internal rotation (OS:65.7º, HS:68.1º)(p=0.008) and flexion (OS:171.2º, HS:175.9º)(p=0.012) degrees but there was no statistically significant difference in abduction degrees (OS:164.3º, HS:170.4º) (p=0.089). In radiological evaluation, partial graft resorption was detected in 1 patient, but it was asymptomatic. The osteoarthritis which is one of the complications of laterjet procedure, was not detected radiologically. There are some limitations of the study. Firstly, it is a retrospective study. Secondly, the demographic features of the patients such as age, gender, profession and dominant hand are excluded. Thirdly, the mean follow-up time is not too long. Finally, some of the scales filled in are based on the patient's declaration, which may not yield sufficient objective results. In conclusion, the laterjet procedure is a suitable and reliable technique even for revision surgery in the treatment of anterior shoulder instability. It gives positive results in terms of shoulder stability and function. The major disadvantage was found to be the limitation of external rotation. Longer follow-up is needed for another outcomes and late complications, such as osteoarthritis. For any figures or tables, please contact the authors directly

Objectives. The bony shoulder stability ratio (BSSR) allows for quantification of the bony stabilisers in vivo. We aimed to biomechanically validate the BSSR, determine whether joint incongruence affects the stability ratio (SR) of a shoulder model, and determine the correct parameters (glenoid concavity versus humeral head radius) for calculation of the BSSR in vivo. Methods. Four polyethylene balls (radii: 19.1 mm to 38.1 mm) were used to mould four fitting sockets in four different depths (3.2 mm to 19.1mm). The SR was measured in biomechanical congruent and incongruent experimental series. The experimental SR of a congruent system was compared with the calculated SR based on the BSSR approach. Differences in SR between congruent and incongruent experimental conditions were quantified. Finally, the experimental SR was compared with either calculated SR based on the socket concavity or plastic ball radius. Results. The experimental SR is comparable with the calculated SR (mean difference 10%, . sd. 8%; relative values). The experimental incongruence study observed almost no differences (2%, . sd. 2%). The calculated SR on the basis of the socket concavity radius is superior in predicting the experimental SR (mean difference 10%, . sd. 9%) compared with the calculated SR based on the plastic ball radius (mean difference 42%, . sd. 55%). Conclusion. The present biomechanical investigation confirmed the validity of the BSSR. Incongruence has no significant effect on the SR of a shoulder model. In the event of an incongruent system, the calculation of the BSSR on the basis of the glenoid concavity radius is recommended. Cite this article: L. Ernstbrunner, J-D. Werthel, T. Hatta, A. R. Thoreson, H. Resch, K-N. An, P. Moroder. Biomechanical analysis of the effect of congruence, depth and radius on the stability ratio of a simplistic ‘ball-and-socket’ joint model. Bone Joint Res 2016;5:453–460. DOI: 10.1302/2046-3758.510.BJR-2016-0078.R1

The October 2024 Shoulder & Elbow Roundup360 looks at: Proximal humeral fractures with vascular compromise; Outcomes and challenges of revision arthroscopic rotator cuff repair: a systematic review; Evaluating treatment effectiveness for lateral elbow tendinopathy: a systematic review and network meta-analysis; Tendon transfer techniques for irreparable subscapularis tears: a comparative review; Impact of subscapularis repair in reverse shoulder arthroplasty; Isolated subscapularis tears strongly linked to shoulder pseudoparesis; Nexel and Coonrad-Morrey total elbow arthroplasties show comparable revision rates in New Zealand study; 3D MRI matches 3D CT in assessing bone loss and shoulder morphology in dislocation cases.

The December 2024 Shoulder & Elbow Roundup³⁶⁰ looks at: Predicting recurrence of instability after a primary traumatic anterior shoulder dislocation; Predictors of surgery and long-term outcomes in nonoperative management of full-thickness rotator cuff tears; Reverse shoulder arthroplasty viable despite acquired acromial compromise, but higher infection risk noted; LP-PRP reduces retear rates in rotator cuff repair but shows no functional outcome advantage; Long-term clinical outcomes of arthroscopic supraspinatus tendon repair using the single anchor tension band technique – minimum five-year follow-up; Arthroscopic stabilization for anterior shoulder dislocation shows low recurrence rates regardless of prior dislocations; ORIF outperforms arthroplasty for complex radial head fractures: mid-term outcomes; Routine use of surgical helmet systems may not reduce infection risk in shoulder arthroplasty.

Aims

The liner design is a key determinant of the constraint of a reverse total shoulder arthroplasty (rTSA). The aim of this study was to compare the degree of constraint of rTSA liners between different implant systems.

The ideal treatment for traumatic anterior dislocation of the shoulder in the skeletally immature patient is controversial. The aim of this study is to evaluate the outcomes after either conservative and/or surgical treatment using the Latarjet technique. A retrospective series of 49 out of 80 patients were reviewed. We found no significant differences between either treatment method regarding functional scores and pain levels. Although not statistically significant, post-surgical patients showed better signs of shoulder stability than others who have a higher rate of recurrence. Further, 92% of the post-surgical group had returned to the same level of activity versus 52% in the non-surgically treated group. We found no contraindications to operate on a skeletally immature patient. Cite this article: Bone Joint J 2014;96-B:354–9

Background:. Individuals with large Hill-Sachs lesions may be prone to failure and reoccurrence following standard arthroscopic Bankart repair. Here, the Remplissage procedure may promote shoulder stability through infraspinatus capsulo-tenodesis directly into the lesion. Little biomechanicaldata about the Remplissage procedure on glenohumeral kinematics, stability, and range of motion (ROM) currently exists. Questions/purposes:. What are the biomechanical effects of Bankart and Remplissage repair for large Hill-Sachs lesions?. Methods:. Six cadaveric shoulders were tested using a custom shoulder testing system. ROM and glenohumeral translation with applied loads in anterior-posterior (AP) and superior-inferior (SI) directions were quantified at 0° and 60° gleno-humeral abduction. Six conditions were tested: intact, Bankart lesion, Bankart with 40% Hill-Sachs lesion, Bankart repair, Bankart repair with Remplissage, and Remplissage repair alone. Results:. Humeral external rotation (ER) and total range of motion (TR) increased significantly from intact after the creation of the Bankart lesion at both 0° abduction (ER +27.0°, TR +35.8°, p < 0.05) [Fig 1] and 60° abduction (ER +9.5°, TR +30.7°, p < 0.05) [Fig 2], but did not increase further with the addition of the Hill-Sachs lesion. The Bankart repair restored range of motion to intact values 0° abduction at addition of the Remplissage repair did not significantly alter range of motion from the Bankart repair alone. There were no significant changes in AP or SI translation between Bankart repair with and without Remplissage compared to the intact specimen. Conclusions:. The addition of the Remplissage procedure for treatment of large Hill-Sachs lesions had no statistically significant effect on ROM or translation for treatment for large Hill-Sachs lesions. Clinical Relevance: The Remplissage technique may be a suitable option for engaging Hill-Sachs lesions. Further clinical studies are warranted

Purpose of the study: The purpose of this study was to report the clinical and radiographic outcomes a minimum five years after Latarjet-Patte treatment for recurrent traumatic anterior instability of the shoulder in rugby players. It was hypothesised that the Latarjet-Patte procedure fulfils the needs for shoulder stability in rugby players with anterior instability. Material and methods: Thirty-four players (37 shoulders) were included. Mean age was 23.4 years (17–33). A bone lesion of the glenoid was noted in 73% of the shoulders, a humeral defect in 68%. Results: Mean follow-up was 144 months (range 68–237). There was no recurrence (dislocation or subluxation). Apprehension persisted in five patients (14%). Sixty-five percent of the patients resumed playing rugby. Only one patient interrupted his sports activities because of the operated shoulder. The Walch-Duplay and Rowe scores were 86 and 93 points on average. The satisfaction rate was 94%. The block healed in 89% of shoulders (3 fractures, 1 nonunion). Twenty-six shoulders (70%) were free of degenerative disease, 11 shoulders (30%) presented stage 1 lesions. Discussion: In rugby players, anterior instability exhibits characteristic bone lesions of the humerus and glenoid which can be identified as risk factors for recurrent instability. The Latarjet-Patte procedure provides a stable shoulder allowing resumption of rugby player for most patients with no long-term degradation of the shoulder joint. These results are in favour of our strategy to propose the coracoids block systematically for recurrent anterior instability in rugby players

We report the 20-year results of Bonnin's modification of the Bristow-Latarjet procedure in 14 patients operated on by one surgeon. All but one patient had had traumatic dislocations. At review, the Rowe scores were excellent in five, good in eight and fair in one. The functional outcome was satisfactory, with a mean Constant-Murley score of 80 points (68 to 95), but 12 patients had restriction of external rotation (86%). There were radiological degenerative changes in ten shoulders (71%): six in Samilson grade I, one in grade II, and three in grade III. Isometric power was considerably reduced in patients with grade-III degenerative change. This operation provides good long-term shoulder stability, but the high incidence of radiological degenerative change is a cause for concern

Aims

Recurrent dislocation is both a cause and consequence of glenoid bone loss, and the extent of the bony defect is an indicator guiding operative intervention. Literature suggests that loss greater than 25% requires glenoid reconstruction. Measuring bone loss is controversial; studies use different methods to determine this, with no clear evidence of reproducibility. A systematic review was performed to identify existing CT-based methods of quantifying glenoid bone loss and establish their reliability and reproducibility

Purpose of the study: Posterior fracture-impaction of the humeral head (Hill-Sachs defect or Malgainge notch) is a well-known factor of failure for arthroscopic shoulder stabilisation procedures. Recently, Wolf proposed arthroscopic posterior capsulodesis and tenodesis of the infraspinatus, or what we call in French Hill-Sachs Remplissage (filling). We hypothesised that capsule and tendon healing within the bony defect could explain the efficacy of this arthroscopic technique. Material and methods: Prospective clinical study of a continuous series. Inclusion criteria:. recurrent anterior instability (dislocation or subluxation);. isolated “engaged” humeral defect;. Bankart arthroscopy and Hill-Sachs remplissage;. arthroCT or MRI at least 6 months after surgery. Exclusion criteria:. associated bone loss in the glenoid;. associated rotator cuff tear. Twenty shoulders (20 patients) met the inclusion and exclusion criteria and underwent Hill-Sachs remplissage. Four orthopaedic surgeons evaluated independently the soft tissue healing in the humeral defect. Mann-Whitney analysis was used to search for a link between rate of healing and clinical outcome. Results: Filling of the humeral defect reached 75 to 100% in 16 patients (80%°; it was 50–75% in 4 patients. Healing was never noted less than 50%. The short-term clinical outcome (mean follow-up 11.4 months, range 6–32) showed an excellent results as assessed by the Constant score (mean 92±8.9 points) and the Walch-Duplay score (91 points). The subjective shoulder value (SSV) was 50% preoperatively and 89% at last follow-up. There were no cases of recurrent instability. This study was unable to establish a relationship between minor healing and less favourable clinical outcome. Discussion: This study confirmed our hypothesis that arthroscopic Hill-Sachs remplissage provides a high rate of significant healing in a majority of patients. Capsule and tendon healing in the humeral defect yields significant shoulder stability via at least two mechanisms:. prevention of defect engagement on the anterior border of the glenoid and. posterior force via improved muscle and tendon balance in the horizontal plane. Further mid- and long-term results will be needed to establish a confirmed correlation between healing and clinical outcome

Purpose of the study: The purpose of this retrospective clinical and radiographic study was to analyse the long-term results obtained after Patte’s triple locking procedure for the treatment of anterior instability of the shoulder joint. Material and methods: A questionnaire was sent to 574 patients who underwent the procedure performed by the same senior operator from 1986 to 2006. Variables studied wer the Walch-Duplay score (with pain score), patient satisfaction, postoperative complications and radiographic aspect. Results: One hundred fifty patients (26%) responded and sent three radiographs. There were 107 men and 43 women, mean age 28.6±8.7 years (range 16–57). Mean follow-up was 14.6 years (range 2.8–22.6). One hundred seventeen patients (78%) were reviewed with follow-up greater than 10 years. Two patients (1.3%) experienced recurrent anterior instability; no revision was required. The Walch-Duplay scores were excellent or good in 146 patients (97.3%); 53% of patients were pain free; 34% had episodic pain, 9% moderate to mild pain and 4% severe pain. Resumption of sports activity was noted by 85% of patients. Overall, 79% of patients were very satisfied, 18% satisfied, and 3% not satisfied. Postoperative complications (2%) were one case each of infection, transient paresis of the musculocutaeous nerve, and superficial venous thrombosis. There were radiographic signs of an anomaly of the coracoids block in 13 patients (8%); non-union (n=3), lysis (n=4) fracture (n=2), migration (n=1), fracture of the ceramic washer (n=3). The block or washer overhang was noted in 19 patients (12.7%). Centred osteoarthritis was noted in 31% of patients (25% Samilson 1, 4% Samilson 2, 2% Samilson 3). There were two factors associated with long-term degenerative disease: age > 40 at surgery (p=0.02 and block overhang (p< 0.01). Discussion: Patte’s triple locking procedure is an open procedure for the treatment of anterior shoulder instability. The technique is very minute and specific postoperative rehabilitation is needed. In these conditions, the operation is effective, providing good control of shoulder stability and allowing resumption of sports activities with a low complication rate. This study shows that long-term degenerative disease can be decreased if the patient undergoes surgery before the age of 40 years and if the coracoids block does not overhang

We studied the contributions of the long and short heads of the biceps (LHB, SHB) to anterior stability in 13 cadaver shoulders. The LHB and SHB were replaced by spring devices and translation tests at 90 degrees abduction of the arm were performed by applying a 1.5 kg anterior force. The position of the humeral head was monitored by an electromagnetic tracking device with or without an anterior translational force; with 0 kg, 1.5 kg or 3 kg loads applied on either LHB or SHB tendons in 60 degrees, 90 degrees or 120 degrees of external rotation; and with the capsule intact, vented, or damaged by a Bankart lesion. The anterior displacement of the humeral head under 1.5 kg force was significantly decreased by both the LHB and SHB loading in all capsular conditions when the arm was in 60 degrees or 90 degrees of external rotation. At 120 degrees of external rotation, anterior displacement was significantly decreased by LHB and SHB loading only when there was a Bankart lesion. We conclude that LHB and SHB have similar functions as anterior stabilizers of the glenohumeral joint with the arm in abduction and external rotation, and that their role increases as shoulder stability decreases. Both heads of the biceps have been shown to have a stabilising function in resisting anterior head displacement, and consideration should therefore be given to strengthening the biceps during rehabilitation programmes for chronic anterior instability of the shoulder