Introduction. Anterior shoulder instability results in labral and osseous glenoid injuries. With a large osseous defect, there is a risk of recurrent dislocation of the joint, and therefore the patient must undergo surgical correction. An MRI evaluation of the patient helps to assess the soft tissue injury. Currently, the volumetric three-dimensional (3D) reconstructed CT image is the standard for measuring glenoid bone loss and the glenoid index. However, it has the disadvantage of exposing the patient to radiation and additional expenses. This study aims to compare the values of the glenoid index using MRI and CT. Method. The present study was a two-year cross-sectional study of patients with shoulder pain, trauma, and dislocation in a tertiary hospital in Karnataka. The sagittal proton density (PD) section of the glenoid and enface 3D reconstructed images of the scapula were used to calculate glenoid bone loss and the glenoid index. The baseline data were analyzed using descriptive statistics, and the Chi-square test was used to test the association of various complications with selected variables of interest. Result. The glenoid index calculated in the current study using 3D volumetric CT images and MR sagittal PD images was 0.95±0.01 and 0.95±0.01, respectively. The CT and MRI glenoid bone loss was 5.41±0.65% and 5.38±0.65%, respectively. When compared, the glenoid index and bone loss calculated by MRI and CT revealed a high correlation and significance with a p-value of <0.001. Conclusions. The study concluded that MRI is a reliable method for glenoid measurement. The sagittal PD sequence combined with an enface glenoid makes it possible to identify osseous defects linked to glenohumeral joint damage and dislocation. The values derived from 3D CT are identical to the glenoid index and bone loss determined using the sagittal PD sequence in MRI

Glenohumeral joint injuries frequently result in shoulder instability. However, the biomechanical effect of cartilage loss on shoulder stability remains unknown. The aim of the current study was to investigate biomechanically the effect of two severity stages of cartilage loss in different dislocation directions on shoulder stability. Joint dislocation was provoked for 11 human cadaveric glenoids in seven different dislocation directions between 3 o'clock (anterior) to 9 o'clock (posterior) dislocation. Shoulder stability ratio (SSR) and concavity gradient were assessed in intact condition, and after 3 mm and 6 mm simulated cartilage loss. The influence of cartilage loss on SSR and concavity gradient was statistically evaluated. Between intact state and 6 mm cartilage loss, both SSR and concavity gradient decreased significantly in every dislocation direction (p≤0.038), except the concavity gradient in 4 o'clock dislocation direction (p=0.088). Thereby, anterior-inferior dislocation directions were associated with the highest loss of SSR and concavity gradient of up to 59.0% and 49.4%, respectively, being significantly higher for SSR compared to all other dislocation directions (p≤0.04). The correlations between concavity gradient and SSR for pooled dislocation directions were significant for all three conditions of cartilage loss (p<0.001). From a biomechanical perspective, articular cartilage of the glenoid contributes significantly to the concavity gradient, correlating strongly with the associated loss in glenohumeral joint stability. The highest effect of cartilage loss was observed in anterior-inferior dislocation directions, suggesting that surgical intervention should be considered for recurrent shoulder dislocations in the presence of cartilage loss

Repeat revision hip replacements can lead to severe bone loss necessitating salvage procedures such as proximal or total femoral replacement. We present medium term outcomes from our experience of the Limb Preservation System (LPS) in patients with failed revision hip arthroplasties. All patients undergoing proximal femoral or total femoral replacement from 2003–2007 at our unit were reviewed. Data was collected preoperatively and at annual assessment post procedure for a minimum of 5 years. This included clinical review, functional outcome scores (WOMAC, Oxford Hip Score, Harris Hip Score) and radiographic evaluation. A total of 17 patients underwent femoral replacement (13 proximal, 4 total) using the LPS during the study period. Within this cohort there were 13 males and 4 females with a mean age of 64 years (range 47–86). Median follow up was 7 years (range 5–9 years). Primary diagnoses were DDH (7), Primary OA (5), RA (2), proximal femoral fracture (2) and phocomelia (1). Five patients (29%) required further revision surgery for infection (2 patients) or recurrent dislocations (3 patients). No stems required revision due to aseptic loosening or stem failure at 5–9 years. Compared to preoperative assessment, there was significant improvement in median outcome scores at 5 years (WOMAC increased by 33 points, Oxford hip score by16 points and Harris hip score by 43 points). 82% of patients maintained functional independence at latest review. The Limb Preservation System offers a salvage procedure for failed revision total hip arthroplasty with significant symptom and functional improvement in most patients at medium term follow up

The medial patellofemoral ligament is commonly torn in first patella dislocation and according to the literature occurs most frequently at the femoral insertion. As research has demonstrated the MPFL to be a primary soft tissue stabilizer of the patella there has been increased interest in acute repair of the ligament with the aim of reducing the risk of recurrent dislocation. MRI is generally used pre op to identify the site of rupture allowing planning of the surgical repair, however there is currently no published data regarding the correlation between surgical and MRI findings to confirm the reliability of this modality of imaging. A retrospective analysis of all patients who were referred for MRI following patella dislocation was performed. The surgical and MRI findings of those who subsequently underwent MPFL repair were compared to look for any correlation. 41 patients were first time patella dislocators and 38 had MPFL rupture diagnosed on MRI. Of these 19 progressed to surgical intervention and 17 had adequate data available from the notes and to permit comparison. All of the MPFLs ruptured at the patella insertion. In 76.5% (13/17) of patients the site of MPFL rupture was correctly identified on MRI scan. Of those that were discordant 3/4 had the site of rupture identified as the femoral insertion on MRI and on 1/4 the MRI suggested rupture at both the femoral and patella insertions. MPFL rupture is common in first time dislocations occurring in 93%% of this cohort. There was a clear predominance patella insertion rupture in our study which contrasts with the majority of the published literature. By correlating surgical and radiological findings we can conclude that while MRI can accurately diagnose MPFL rupture at the patella insertion but it is less accurate in identifying rupture at the femoral insertion

The Medial Patellofemoral Ligament (MPFL) is the main restraining force against lateral patellar displacement. It is often disrupted following patellar subluxation or dislocation. MPFL reconstruction is frequently performed when conservative management fails and the patient experiences recurrent patellar dislocation. Various MPFL reconstruction procedures have been described in the literature and reported outcomes are encouraging. This study analyses the radiographic outcomes following MPFL reconstruction. From January 2006 to January 2011, 76 consecutive patients (80 knees) with patellar recurrent dislocation underwent medial patellofemoral ligament reconstruction in three large teaching hospitals. Mean follow-up was 31.8 months (range, 13–72). Semitendinosus and gracilis autografts were used for the reconstruction and all procedures were carried out by the senior authors (WL, BR, CW, MB). Plain radiographs (Anteroposterior (AP), Lateral and Skyline) performed preoperatively and postoperatively were used to compare the sulcus angle, congruence angle, lateral patellofemoral angle, trochlear dysplasia (Dejour classification), trochlear boss height and patellar height (Caton-Deschamps ratio). Plain radiographs (Lateral) performed postoperatively were used to evaluate the femoral tunnel placement used for MPFL reconstruction. The sulcus angle improved from 143.2° (122.9–157.7) to 139.3° (115.7–154.6) and the congruence angle improved from 26.7° (−17.5–82.6) to 0.26° (−35.3–7.8). The lateral patellofemoral angle was 7.99° (3.2–19.2) preoperatively and 9.02° (3.2–18.2) postoperatively. The Caton-Deschamps ratio was 1.2 (1.0–1.5) preoperatively and 1.0 (0.8–1.1) postoperatively. Using the Dejour classification of trochlear dysplasia, all preoperative radiographs were considered to be grade C or D and all postoperative radiographs were considered to be grade A or B. Trochlear boss height was 5.9mm (1.8–11.6) preoperatively and 4.7mm (1.6–6.9) postoperatively. 59% of the femoral tunnels were considered to be in a good position on postoperative radiographs. This study displayed a significant improvement in postoperative radiographic parameters, demonstrating the importance of anatomic restoration when performing MPFL reconstruction

Introduction. The purpose of this study was to evaluate the functional and radiographical mid-term follow-up results of a second generation metal-on-metal cementless total hip arthroplasty for the treatment of osteonecrosis of the femoral head in patients younger than 50 years. Methods. Twenty eight patients (35 hips) who underwent total hip arthroplasty with second generation metal-on-metal bearings for osteonecrosis of the femoral head at a minimum 5-year follow-up were included in this study. There were 5 women (6 hips) and 23 men (29 hips) who had a mean age of 40 years (range, 23 to 49 years) and a mean follow-up of 7 years. We used a Fitmore (Zimmer) cup and a 28mm Metasul femoral head in all cases. A CLS (Protek AG/Zimmer) femoral stem was used in 30 hips and a Cone prosthesis¯ (Protek AG) was used in 5 hips. Functional results were measured by Harris hip (HHS) and WOMAC scores. Radiographic evaluations were used to assess loosening and osteolysis according to Gruen and Delee and Charnley criteria. Results. The mean Harris hip score improved from 58 points (range, 35 to 67 points) pre-operatively to 92 points (range, 84 to 99 points) post-operatively, and the mean WOMAC score improved from 73 points (range, 63 to 89 points) to 30 points (range, 24 to 41 points). On radiological evaluation, all femoral and acetabular components were well-fixed without loosening or subsidence. Osteolysis was observed in 5 hips (14%) (acetabular osteolysis in 2 cases-Zone 2; 1, Zone 3; 1, femoral osteolysis in 3 cases- Zone 1; 2, Zone 7; 1). There were no complications including immediate post-operative deep infection, delayed infection, or recurrent dislocation. There was no case of revision for aseptic loosening. Conclusion. Second generation metal-on-metal cementless total hip arthroplasty for the treatment of osteonecrosis of the femoral head in patients younger than 50 years showed favorable functional and radiographic results

Introduction. The purpose of this study was to evaluate the functional and radiographical results in patients who underwent a modified minimally invasive two-incision total hip arthroplasty using large-diameter ceramic-on-ceramic articulations for osteonecrosis of the femoral head. Methods. One hundred and one patients (135 hips) who underwent unilateral minimally invasive two-incision total hip arthroplasties using large diameter ceramic-on-ceramic bearings for osteonecrosis of the femoral head with a minimum 12-months follow-up were included in this study. There were 22 women and 79 men who had a mean age of 46 years (range, 22 to 82 years). The mean follow-up was 25 months (range, 12 to 36 months). All surgeries were done by a single hip surgeon. The authors modified the original minimally invasive two-incision total hip arthroplasty technique and used large-diameter (32mm, 36mm) ceramic-on-ceramic articulations. In the lateral position, an anterolateral approach between the gluteus medius and tensor fascia lata muscles and a posterior approach between the piriformis and gluteus medius muscles was used. Functional results were measured by Harris hip (HHS) and WOMAC scores. Radiographic evaluation was assessed for positioning of the components and complications were assessed. Results. The mean Harris hip score improved from 43 points (range, 13 to 58 points) pre-operatively to 96 points (range, 73 to 100 points) post-operatively and the mean WOMAC score improved from 67 points (range, 50 to 98 points) to 28 points (range, 26 to 39 points). On radiological evaluation, the mean lateral opening angle of the acetabular component was 35.9 degrees (range, 27.1 degrees to 47.4 degrees) and the mean stem position was valgus 2.4 degrees (range, varus 2.7 degrees to valgus 5.3 degrees). One patient suffered an intra-operative femur fracture and another underwent revision surgery due to stem subsidence. There were no complications such as immediate post-operative deep infection, delayed infection, or recurrent dislocation. Conclusion. A modified minimally invasive two-incision total hip arthroplasty using large-diameter ceramic-on-ceramic articulation for osteonecrosis of the femoral head is safe and reproducible in terms of achieving proper implant positioning and early functional recovery. In particular, the complication rates encountered, especially dislocation, were low