Aims. The use of fluoroscopy in orthopaedic surgery creates risk of radiation exposure to surgeons. Appropriate personal protective equipment (PPE) can help mitigate this. The primary aim of this study was to assess if current radiation protection in orthopaedic trauma is safe. The secondary aims were to describe normative data of radiation exposure during common orthopaedic procedures, evaluate ways to improve any deficits in protection, and validate the use of electronic personal dosimeters (EPDs) in assessing radiation dose in orthopaedic surgery. Methods. Radiation exposure to surgeons during common orthopaedic trauma operations was prospectively assessed using EPDs and thermoluminescent dosimeters (TLDs). Normative data for each operation type were calculated and compared to recommended guidelines. Results. Current PPE appears to mitigate more than 90% of ionizing radiation in orthopaedic fluoroscopic procedures. There is a higher exposure to the inner thigh during seated procedures. EPDs provided results for individual procedures. Conclusion. PPE currently used by surgeons in orthopaedic trauma theatre adequately reduces radiation exposure to below recommended levels. Normative data per trauma case show specific anatomical areas of higher exposure, which may benefit from enhanced radiation protection. EPDs can be used to assess real-time radiation exposure in orthopaedic surgery. There may be a role in future medical wearables for orthopaedic surgeons. Cite this article: Bone Jt Open 2022;3(11):907–912

Advances in orthopaedic surgery have led to minimally invasive techniques to decrease patient morbidity by minimizing surgical exposure, but also limits direct visualization. This has led to the increased use of intraoperative fluoroscopy for fracture management. Unfortunately, these procedures require the operating surgeon to stay in close proximity to the patient, thus being exposed to radiation scatter. The current National Council on Radiation Protection recommends no more than 50 mSv of radiation exposure to avoid ill-effects. Risks associated with radiation exposure include cataracts, skin, breast and thyroid cancer, and leukemia. Despite radiation protection measures, there is overwhelming evidence of radiation-related diseases in orthopaedic surgeons. The risk of developing cancer (e.g. thyroid carcinoma and breast cancer) is approximately eight times higher than in unexposed workers. Despite this knowledge, there is a paucity of evidence on radiation exposure in orthopaedic surgery residents, therefore the goal of this study is to quantify radiation exposure in orthopaedic surgery residents. We hypothesize that orthopaedic surgery residents are exposed to a significant amount of radiation throughout their training. We specifically aim to: 1) quantify the amount of radiation exposure throughout a Canadian orthopaedic residency training program and 2) determine the variability in resident radiation exposure by rotation assignment and year of training. This ongoing prospective cohort study includes all local orthopaedic surgery residents who meet eligibility criteria. Inclusion criteria: 1) adult residents in an orthopaedic surgery residency program. Exclusion criteria: 1) female residents who are pregnant, and 2) residents in a non-surgical year (i.e. leave of absence, research, Masters/PhD). After completion of informed consent, each eligible resident will wear a dosimeter to measure radiation exposure in a standardized fashion. Dosimeters will be worn on standardized lanyards underneath lead protection in their left chest pocket during all surgeries that require radiation protection. Control dosimeters will be worn on the outside of each resident's scrub cap for comparison. Dosimeter readings will then be reported on a monthly and rotational basis. All data will be collected on a pre-developed case report form. All data will be de-identified and stored on a secure electronic database (REDCap). In addition to monthly and rotational dosimeter readings, residents will also report sex, height, level of training, parental status, and age for secondary subgroup analyses. Residents will also report if they have personalized lead or other protective equipment, including lead glasses. Resident compliance with dosimeter use will be measured by self report of >80% use on operative days. Interim analysis will be performed at the 6-month time point and data collection will conclude at the 1 year time point. Data collection began in July 2018 and interim 6-month results will be available for presentation at the CORA annual meeting in June 2019. This is the first prospective study quantifying radiation exposure in Canadian orthopaedic residents and the results will provide valuable information for all Canadian orthopaedic training programs

The primary objective of this study was to determine if paediatric proximal humerus fractures undergo significant displacement resulting in change in management.

A retrospective analysis was performed on children who presented with proximal humeral fractures to our institution between 2009 and 2014. Patients were included if they were diagnosed with a fracture of the proximal humerus in the absence of an underlying bone cyst or pathological condition. Patients with open fractures, multiple fractures, neurologic, or vascular injuries were excluded. The primary endpoint was conversion to operative treatment after initial non-operative management. Secondary endpoints were a healed fracture with acceptable alignment at the final radiographic evaluation, as well as the number of follow-up radiographs obtained after the initiation of non-operative management.

A decision to manage the fracture operatively at the initial presentation was made in 14 out of 239 patients. Of the 225 patients that were initially managed non-operatively, only 1 patient underwent subsequent surgical management. In this series, no non-unions, re-fractures, nor fracture-dislocations were identified.

These data support that the majority of management decisions for paediatric proximal humeral fractures are made at the initial presentation. Once non-operative management is chosen, routine follow-up imaging rarely leads to any change in treatment.

Abstract. Background. With the increasingly accepted method of suprapatellar tibial nailing for tibial shaft fractures, we aimed to compare intraoperative and postoperative outcomes of infrapatellar (IP) vs suprapatellar (SP) tibial nails. Methods. A retrospective cohort analysis of 58 patients. 34 SP tibial nails over 3 years versus 24 IP tibial nails over a similar time frame. We compared; radiation exposure, patient positioning time (PPT), non-union rate and follow-up time. Knee pain in the SP group was evaluated, utilising the Hospital for Special Surgery (HSS) Knee injury and Osteoarthritis outcome score (KOOS). Results. 58 patients with a mean age of 43 years were included. Mean intraoperative radiation dose for SP nails was 61.78cGy (range 11.60 to 156.01cGy) vs 121.09cGy (range 58.01 to 18.03cGy) for IP nails (p < 0.05). Mean PPT for SP nails was 10 minutes vs 18 minutes for IP nails (p < 0.05). All fractures united in the SP group vs one non-union in the IP group. Mean follow-up was 5.5 months vs 11 months in the SP and IP group respectively. Mean KOOS was 7 (range 0 to 22) at 6 months for the SP group. Conclusion. The semi extended position (SP group) leads to reduced radiation exposure because of ease of imaging. All Patients in the SP group showed improved outcomes, with shorter follow-up and fracture union. The KOOS revealed SP nail patients had minimal pain and good knee function. This study establishes a management and PROMs baseline for ongoing evaluation of SP nails

Abstract. INTRODUCTION. With increasing use of fluoroscopy in Orthopaedic theatres in recent years, the occupational radiation exposure to the surgeons and the theatre staff has increased significantly. Thyroid is one of the most radio-sensitive tissues in the body, but there is a clear lack of awareness among theatre staff of risks of radiation to thyroid. METHODS. We prospectively reviewed the use of thyroid shield by the theatre staff in the orthopaedic theatre for two weeks period. We also recorded the number of fluoroscopic images taken and total radiation dosage for each case. RESULTS. Our results showed that of 249 staff in the theatres of which, only 35 people (14.2%) wore thyroid shields during fluoroscopy, whereas 100% were complaint with body protection shield. We noticed that only 30% of the surgeons, 40% of the scrub nurses and 5% anaesthetist use this, while 95% of the radiographers uses thyroid protection in theatre. Average total radiation during upper-limb procedures was 1.25 cGy, during lower-limb procedures it was 43.48 cGy. Total radiations were very high particularly during lower-limb nailing procedures (80.98 cGy). CONCLUSION. Extensive use of fluoroscopy has a stochastic effect (accumulative effect) on thyroid gland particularly, if the dose in higher than 65 cGy. Despite its availability, only 14% people use the thyroid protection shield. We must emphasise the use of thyroid protection shield to the Orthopaedic surgeons, particularly during lower-limb procedures

Despite of the significance of computed tomography (CT) images in surgery planning and guidance, CT scans are not always applicable due to high radiation exposure, particularly risky for children and youth. It is critical to reduce radiation exposure for high sensitive candidates and statistical atlas based approach has therefore been an alternative with minimal radiation exposure. We addressed the aforementioned challenges through statistical atlas constructions, 3D atlas to 2D radiography registration to get patient-specific models with minimal radiations and multiple-objective optimisation for planning the treatments. Statistical atlas can be employed to construct the global reference map. The atlas then can be registered to a pair of intra-operative fluoroscopy images for constructing a patient-specific model. In this way, we can reduce the radiation exposure to the patients significantly. To characterise shape variations, a statistical shape atlas is constructed using Point Distribution Model, by which a mean shape, modes of shape variation and shape variation are obtained. To construct the patient specific model from the statistical atlas, 3D-2D registration is essential and a back-projected ray based 3D-2D Iterative Closest Point registration method is investigated. Then the treatment planning module for optimal insertion is investigated to avoid critical zone and unnecessary punctures. The experiment shows the feasibility of the proposed method for atlas-based, image-guided orthopaedic interventions using minimal radiograph and optimal planning. The proposed framework can be extended to other potential applications and one example is for periacetabular osteotomy, particularly for young females which is of great importance to minimise radiation dose during surgical planning and navigation

Primary care physicians rely on radiology reports to confirm a scoliosis diagnosis and inform the need for spine specialist referral. In turn, spine specialists use these reports for triage decisions and planning of care. To be a valid predictor of disease and management, radiographic evaluation should include frontal and lateral views of the spine and a complete view of the pelvis, leading to accurate Cobb angle measurements and Risser staging. The study objectives were to determine 1) the adequacy of index images to inform treatment decisions at initial consultation by generating a score and 2) the utility of index radiology reports for appropriate triage decisions, by comparing reports to corresponding images. We conducted a retrospective chart and radiographic review including all idiopathic scoliosis patients seen for initial consultation, aged three to 18 years, between January 1-April 30, 2021. A score was generated based on the adequacy of index images to provide accurate Cobb angle measurements and determine skeletal maturity (view of full spine, coronal=two, lateral=one, pelvis=one, ribcage=one). Index images were considered inadequate if repeat imaging was necessary. Comparisons were made between index radiology report, associated imaging, and new imaging if obtained at initial consultation. Major discrepancies were defined by inter-reader difference >15°, discordant Risser staging, or inaccuracies that led to inappropriate triage decisions. Location of index imaging, hospital versus community-based private clinic, was evaluated as a risk factor for inadequate or discrepant imaging. There were 94 patients reviewed with 79% (n=74) requiring repeat imaging at initial consultation, of which 74% (n=55) were due to insufficient quality and/or visualization of the sagittal profile, pelvis or ribcage. Of index images available for review at initial consult (n=80), 41.2% scored five out of five and 32.5% scored two or below. New imaging showed that 50.0% of those patients had not been triaged appropriately, compared to 18.2% of patients with a full score. Comparing index radiology reports to initial visit evaluation with <60 days between imaging (n=49), discrepancies in Cobb angle were found in 24.5% (95% CI 14.6, 38.1) of patients, with 18.4% (95% CI 10.0, 31.4) categorized as major discrepancies. Risser stage was reported in only 14% of index radiology reports. In 13.8% (n=13) of the total cohort, surgical or brace treatment was recommended when not predicted based on index radiology report. Repeat radiograph (p=0.001, OR=8.38) and discrepancies (p=0.02, OR=7.96) were increased when index imaging was obtained at community-based private clinic compared to at a hospital. Re-evaluation of available index imaging demonstrated that 24.6% (95% CI 15.2, 37.1) of Cobb angles were mis-reported by six to 21 degrees. Most pre-referral paediatric spine radiographs are inadequate for idiopathic scoliosis evaluation. Standardization of spine imaging and reporting should improve measurement accuracy, facilitate triage and decrease unnecessary radiation exposure

Introduction. Instability, loosening, and patellofemoral pain belong to the main causes for revision of total knee arthroplasty (TKA). Currently, the diagnostic pathway requires various diagnostic techniques such as x-rays, CT or SPECT-CT to reveal the original cause for the failed knee prosthesis, but increase radiation exposure and fail to show soft-tissue structures around TKA. There is a growing demand for a diagnostic tool that is able to simultaneously visualize soft tissue structures, bone, and TKA without radiation exposure. MRI is capable of visualising all the structures in the knee although it is still disturbed by susceptibility artefacts caused by the metal implant. Low-field MRI (0.25T) results in less metal artefacts and offers the ability to visualize the knee in weight-bearing condition. Therefore, the aim of this study is to investigate the possibilities of low field MRI to image, the patellofemoral joint and the prosthesis to evaluate the knee joint in patients with and without complaints after TKA. Method. Ten patients, eight satisfied and two unsatisfied with their primary TKA, (NexGen posterior stabilized, BiometZimmer) were included. The patients were scanned in sagittal, coronal, and transversal direction on a low field MRI scanner (G-scan Brio, 0.25T, Esaote SpA, Italy) in weight-bearing and non-weight-bearing conditions with T1, T2 and PD-weighted metal artefact reducing sequences (TE/TR 12–72/1160–7060, slice thickness 4.0mm, FOV 260×260×120m. 3. , matrix size 224×216). Scans were analysed by two observers for:. - Patellofemoral joint: Caton-Descamps index and Tibial Tuberosity-Trochlear Groove (TT-TG) distance. - Prosthesis malalignment: femoral component rotation using the posterior condylar angle (PCA) and tibial rotation using the Berger angle. Significance of differences in parameters between weight-bearing and non-weight-bearing were calculated with the Wilcoxon rank test. To assess the reliability the inter and intra observer reliability was calculated with a two-way random effects model intra class correlation coefficient (ICC). The two unsatisfied patients underwent revision arthroplasty and intra-operative findings were compared with MRI findings. Results. In the satisfied group, a significant difference was found between TT-TG distance in non-weight-bearing and weight-bearing condition (p=0.018), with a good interrater reliability ICC=0.89. Furthermore, differences between weight-bearing and non-weight-bearing were found for the CD ratio, however, not significant (p=0.093), with a good interrater reliability ICC=0.89. The Berger angle could be measured with an excellent interrater reliability (ICC=0.94). The PCA was hard to assess with a poor interrater reliability (ICC=0.48). For one unsatisfied patient a deviation was found for tibial component rotation, according to the perioperative findings as, ‘malposition of the tibial component’. For the other unsatisfied patient revision surgery was performed due to aseptic loosening in which the MRI showed a notable amount of synovitis. Conclusion. It is possible to image the patellofemoral joint and knee prosthesis with low field MRI. Patellofemoral measurements and tibial component rotation measurements can reliably be performed. For the two patients with complaints MRI findings were consistent with intra-operative findings. Further research should focus on a larger group of patients with complaints after TKA to verify the diagnostic capacity of low field MRI for peri-prosthetic knee problems. For any figures or tables, please contact authors directly

Neuromuscular scoliosis patients face rates of major complications of up to 49%. Along with pre-operative risk reduction strategies (including nutritional and bone health optimization), intra-operative strategies to decrease blood loss and decrease surgical time may help mitigate these risks. A major contributor to blood loss and surgical time is the insertion of instrumentation which is challenging in neuromuscular patient given their abnormal vertebral and pelvic anatomy. Standard pre-operative radiographs provide minimal information regarding pedicle diameter, length, blocks to pedicle entry (e.g. iliac crest overhang), or iliac crest orientation. To minimize blood loss and surgical time, we developed an “ultra-low dose” CT protocol without sedation for neuromuscular patients. Our prospective quality improvement study aimed to determine: if ultra-low dose CT without sedation was feasible given the movement disorders in this population; what the radiation exposure was compared to standard pre-operative imaging; whether the images allowed accurate assessment of the anatomy and intra-operative navigation given the ultra-low dose and potential movement during the scan. Fifteen non-ambulatory surgical patients with neuromuscular scoliosis received the standard spine XR and an ultra-low dose CT scan. Charts were reviewed for etiology of neuromuscular scoliosis and medical co-morbidities. The CT protocol was a high-speed, high-pitch, tube-current modulated acquisition at a fixed tube voltage. Adaptive statistical iterative reconstruction was applied to soft-tissue and bone kernels to mitigate noise. Radiation dose was quantified using reported dose indices (computed tomography dose index (CTDIvol) and dose-length product (DLP)) and effective dose (E), calculated through Monte-Carlo simulation. Statistical analysis was completed using a paired student's T-test (α = 0.05). CT image quality was assessed for its use in preoperative planning and intraoperative navigation using 7D Surgical System Spine Module (7D Surgical, Toronto, Canada). Eight males and seven females were included in the study. Their average age (14±2 years old), preoperative Cobb angle (95±21 degrees), and kyphosis (60±18 degrees) were recorded. One patient was unable to undergo the ultra-low dose CT protocol without sedation due to a co-diagnosis of severe autism. The average XR radiation dose was 0.5±0.3 mSv. Variability in radiographic dose was due to a wide range in patient size, positioning (supine, sitting), number of views, imaging technique and body habitus. Associated CT radiation metrics were CTDIvol = 0.46±0.14 mGy, DLP = 26.2±8.1 mGy.cm and E = 0.6±0.2 mSv. CT radiation variability was due to body habitus and arm orientation. The radiation dose differences between radiographic and CT imaging were not statistically significant. All CT scans had adequate quality for preoperative assessment of pedicle diameter and orientation, obstacles impeding pedicle entry, S2-Alar screw orientation, and intra-operative navigation. “Ultra-low dose” CT scans without sedation were feasible in paediatric patients with neuromuscular scoliosis. The effective dose was similar between the standard preoperative spinal XR and “ultra-low dose” CT scans. The “ultra-low dose” CT scan allowed accurate assessment of the anatomy, aided in pre-operative planning, and allowed intra-operative navigation despite the movement disorders in this patient population

Neuromuscular scoliosis patients face rates of major complications of up to 49%. Along with pre-operative risk reduction strategies (including nutritional and bone health optimization), intra-operative strategies to decrease blood loss and decrease surgical time may help mitigate these risks. A major contributor to blood loss and surgical time is the insertion of instrumentation which is challenging in neuromuscular patient given their abnormal vertebral and pelvic anatomy. Standard pre-operative radiographs provide minimal information regarding pedicle diameter, length, blocks to pedicle entry (e.g. iliac crest overhang), or iliac crest orientation. To minimize blood loss and surgical time, we developed an “ultra-low dose” CT protocol without sedation for neuromuscular patients. Our prospective quality improvement study aimed to determine:. if ultra-low dose CT without sedation was feasible given the movement disorders in this population;. what the radiation exposure was compared to standard pre-operative imaging;. whether the images allowed accurate assessment of the anatomy and intra-operative navigation given the ultra-low dose and potential movement during the scan. Fifteen non-ambulatory surgical patients with neuromuscular scoliosis received the standard spine XR and an ultra-low dose CT scan. Charts were reviewed for etiology of neuromuscular scoliosis and medical co-morbidities. The CT protocol was a high-speed, high-pitch, tube-current modulated acquisition at a fixed tube voltage. Adaptive statistical iterative reconstruction was applied to soft-tissue and bone kernels to mitigate noise. Radiation dose was quantified using reported dose indices (computed tomography dose index (CTDIvol) and dose-length product (DLP)) and effective dose (E), calculated through Monte-Carlo simulation. Statistical analysis was completed using a paired student's T-test (α= 0.05). CT image quality was assessed for its use in preoperative planning and intraoperative navigation using 7D Surgical System Spine Module (7D Surgical, Toronto, Canada). Eight males and seven females were included in the study. Their average age (14±2 years old), preoperative Cobb angle (95±21 degrees), and kyphosis (60±18 degrees) were recorded. One patient was unable to undergo the ultra-low dose CT protocol without sedation due to a co-diagnosis of severe autism. The average XR radiation dose was 0.5±0.3 mSv. Variability in radiographic dose was due to a wide range in patient size, positioning (supine, sitting), number of views, imaging technique and body habitus. Associated CT radiation metrics were CTDIvol = 0.46±0.14 mGy, DLP = 26.2±8.1 mGy.cm and E = 0.6±0.2 mSv. CT radiation variability was due to body habitus and arm orientation. The radiation dose differences between radiographic and CT imaging were not statistically significant. All CT scans had adequate quality for preoperative assessment of pedicle diameter and orientation, obstacles impeding pedicle entry, S2-Alar screw orientation, and intra-operative navigation. “Ultra-low dose” CT scans without sedation were feasible in paediatric patients with neuromuscular scoliosis. The effective dose was similar between the standard preoperative spinal XR and “ultra-low dose” CT scans. The “ultra-low dose” CT scan allowed accurate assessment of the anatomy, aided in pre-operative planning, and allowed intra-operative navigation despite the movement disorders in this patient population

Fluoroscopic guidance is common in interventional pain procedures. In spine surgery, injections are used for differential diagnosis and determination of indication for surgical treatment as well. Fluoroscopy ensures correct needle placement and accurate delivery of the drug. Also, exact documentation of the intervention performed is possible. However, besides the patient, interventional pain physicians, surgeons and other medical staff are chronically exposed to low dose scatter radiation. The long-term adverse consequences of low dose radiation exposure to the medical staff are still unclear. Especially in university hospital settings, where education of trainees is performed, fluoroscopy time and total radiation exposure are significantly higher than in private practice settings. It remains a challenge for university hospitals to reduce the fluoroscopic time while maintaining the quality of education. Multiple approaches have been made to reduce radiation exposure in fluoroscopy, including the wide spread use of pulsed fluoroscopy, or rarely used techniques like laser guided needle placement systems. The Zero-Dose-C-Arm-Navigation (ZDCAN) allows an optimal positioning of the c-arm without exposure to radiation. For training purposes, relevant anatomical structures can be highlighted for each interventional procedure, so injection needles can be best positioned next to the target area. The Zero-Dose-C-Arm-Navigation (ZDCAN) module was developed to display a radiation free preview of the expected fluoroscopic image of the spine. Using an optical tracking system and a registered 3D-spine model, the expected x-ray image is displayed in real-time as a projection of the model. Additionally, selected anatomical structures including nerve roots, facet joints, vertebral discs and the epidural space, can be displayed. A seamless integration of the ZDCAN in a c-arm system already used in clinical practice for years could be achieved. For easy use, a tool was developed allowing the admission and use of regular single-use syringes and spinal needles. Accordingly, these can be used as pointers in the sterile area, a sterilization of the whole tool after every single injection is not required. We evaluated the efficiency and accuracy of this procedure compared to conventional fluoroscopically guided interventional procedures. In sawbones of the lumbar spine, facet joint injections (N = 50), perineural injections (N = 46) and epidural injections (N = 20) were performed. Highlighting the target area in the radiation free preview model, an optimal positioning of the c-arm could be achieved even by unskilled medical staff. The desired anatomical structures could be identified easily in the x-rays taken, as they were displayed in the 3D model aside. As already seen evaluating a previous version of the ZDCAN module for the lower limb, the total number of x-ray images taken could be reduced significantly. Compared to the conventional group, the number of x-ray images required for facet joint injections could be reduced from 12.5 (±1.1) to 5.7 (±1.1), from 5.4 (±1.8) to 3.8 (±1.3) for perineural injections and from 4.1 (±0.9) to 2.1 (±0.3) for epidural injections. Total radiation time was reduced accordingly. Likewise, the mean time needed for the interventional procedure could be reduced from 168.3 s (±19.1) to 131.4 s (±16.8) for facet joint injections, was unchanged from 97.7 s (±26.0) to 104.7 s (±31.0) for perineural injections and from 60 s (±14.9) to 52 s (±7.1) for epidural injections. The ZDCAN is a powerful tool advancing conventional fluoroscopy to another level. Using the radiation free preview model, the c-arm can easily be positioned to show the desired area. The accentuated display of the target structures in the preview model makes the introduction to fluoroscopy guided interventional procedures easier. This feature might reduce the learning curve to achieve better clinical results with lower radiation dose exposure. Thus, the ZDCAN can be a tool to improve education in university hospital settings for physicians as well as for medical staff while reducing radiation dose exposure in general use

The common practice for insertion of distal locking screws of intramedullary (IM) nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure to patient and surgical personnel. A new technique is introduced which guides the surgeon by landmarks on the X-ray projection. 18 fresh frozen human below-knee specimens (incl. soft tissue) were used. Each specimen was instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland) and was mounted on an OR-table. Two distal interlocking techniques were performed in random order using a Siemens ARCADIS C-arm system (Siemens AG, Munich, Germany). The newly developed guided technique, guides the surgeon by visible landmarks projected onto the fluoroscopy image. A computer program plans the drilling trajectory by 2D-3D conversion and provides said guiding landmarks for drilling in real-time. No additional tracking or navigation equipment is needed. All four distal screws (2 mediolateral, 2 anteroposterior) were placed in each procedure. Operating time, number of taken X-rays and radiation time were recorded per procedure and for each single screw. 8 procedures were performed with the freehand technique and 10 with the guided technique. A 58% reduction in number of fluoroscopy shots per screw was found for the guided technique (7.4±3.4 vs. 17.6±10.3; p < 0.001). Total radiation time was 55% lower for the guided technique (17.1 ± 3.7s vs. 37.9 ± 9.1s) (p = 0.001). Operating time was shorter by 22% in the guided technique (3.2±1.2 min vs. 4.1±2.1 min p = 0.018). In an experimental setting, the newly developed guided freehand technique has proven to markedly reduce radiation exposure when compared to the conventional freehand technique. The method enhances established clinical workflows and does not require cost intensive add-on devices or extensive training. A newly developed simple navigated technique has proven to markedly reduce radiation exposure and time for distal locking of intramedullary nails

Fractures of the femoral head are a challenging problem. The most often performed head preserving procedure worldwide is closed reduction and insertion of cannulated screws under fluoroscopic control. The use of navigation is still experimental in general trauma since rigid reference markers must be attached to all fragments. The examined system (Surgix®, Tel Aviv, Israel) is a fluoroscopy based image analysing system. It consists of a workstation and X-ray opaque markers in surgical tools. When the tool is visible in a C-arm shot a trajectory is displayed as additional layer in the image to serve as guidance for the surgeon. Forty synthetic femurs (Synbone®, Malans, Switzerland) were used and placed inside foam to simulate the soft tissue of the thigh. The models were equipped with 4.5mm radio-opaque markers at the fovea capitis femoris as target point. The aim was to bring the tip of a K-wire as close as possible to the target point entering the bone at the lateral base of the greater trochanter in a center-center position. Twenty were done under image guidance and 20 were operated the conventional way. Outcome measures included the accuracy (the distance between the tip of the wire and the target in a CT), the number of guide wire insertions, procedure duration, radiation exposure and learning curve. In the image guided group optimal guide wire placement was accomplished on first pass in 65% of the cases as compared to 5% in the conventional group (p = < 0.0001). The average number of trial and error was significantly lower in the guided group (1.7 vs. 5.8, p = < 0.0001). Consequently the average duration of the guided procedure was significantly shorter (p = 0.0008) along with radiation exposure time reduced by over 70% (p = 0.0002). The guidance system hit averaged 5.8 mm off target as compared to 5.3 mm for the freehand method (p = 0.3319). Image based guidance significantly shortened the procedure, reduced the radiation exposure and the number of trials without changing the surgeons workflow and can be used in trauma cases were reference marker based navigation is not applicable

Computer-aided surgical systems commonly use preoperative CT scans when performing pelvic osteotomies for intraoperative navigation. These systems have the potential to improve the safety and accuracy of pelvic osteotomies, however, exposing the patient to radiation is a significant drawback. In order to reduce radiation exposure, we propose a new smooth extrapolation method leveraging a partial pelvis CT and a statistical shape model (SSM) of the full pelvis in order to estimate a patient's complete pelvis. A SSM of normal, complete, female pelvis anatomy was created and evaluated from 42 subjects. A leave-one-out test was performed to characterise the inherent generalisation capability of the SSM. An additional leave-one-out test was conducted to measure performance of the smooth extrapolation method and an existing “cut-and-paste” extrapolation method. Unknown anatomy was simulated by keeping the axial slices of the patient's acetabulum intact and varying the amount of the superior iliac crest retained; from 0% to 15% of the total pelvis extent. The smooth technique showed an average improvement over the cut-and-paste method of 1.31 mm and 3.61 mm, in RMS and maximum surface error, respectively. With 5% of the iliac crest retained, the smoothly estimated surface had an RMS surface error of 2.21 mm, an improvement of 1.25 mm when retaining none of the iliac crest. This anatomical estimation method creates the possibility of a patient and surgeon benefiting from the use of a CAS system and simultaneously reducing the patient's radiation exposure

Although most uncomplicated paediatric fractures do not require routine long-term follow-up with an orthopaedic surgeon, practitioners with limited experience dealing with paediatrics fractures will often defer to a strategy of unnecessary frequent clinical and radiographic follow-up. Development of an evidence-based clinical care pathway may help reduce unnecessary radiation exposure to this patient population and reduce costs to patient families and the healthcare system. A retrospective analysis including patients who presented to SickKids hospital between October 2009 and October 2014 for management of clavicle fractures was performed. Patients with previous clavicle fractures, perinatal injury, multiple fractures, non-accidental injury, underlying bone disease, sternoclavicular dislocations, fractures of the medial clavicular physis and fractures that were managed at external hospitals were excluded from the analysis. Variables including age, gender, previous injury, fracture laterality, mechanism of injury, polytrauma, surgical intervention and complications and number of clinic visits were recorded for all patients. Radiographs were analysed to determine the fracture location (medial, middle or lateral), type (simple or comminuted), displacement and shortening. 339 patients (226 males, 113 females) with an average age of 8.1 (range 0.1–17.8) were reviewed. Diagnoses of open fractures, skin tenting or neurovascular injury were rare, 0.6%, 4.1%, and 0%, respectively. 6 (1.8%) patients underwent surgical management. All decisions for surgery were made on the first consultation with the orthopaedic surgeon. For patients managed non-operatively, the mean number of clinic visits including initial consultation in the emergency department was 2.0 (±1.2). The mean number of radiology department appointments was 4.1 (± 1.0) where patients received a mean number of 4.2 (±2.9) radiographs. Complications in the non-operative group were minimal; 2 refractures in our series and no known cases of non-union. All patients achieved clinical and radiographic union and returned to sport after fracture healing. Our series suggests that the decision to treat operatively is made at the initial assessment. If no surgical indications were present at the initial assessment by the primary-care physician, then routine clinical or radiographic follow up is unnecessary. Development of a paediatric clavicle fracture pathway may reduce patient radiation exposure and reduce costs incurred by the healthcare system and patients' families without jeopardising patient outcomes

Introduction. In the evaluation of patients with pre-arthritic hip disorders, making the correct diagnosis and identifying the underlying bone pathology is of upmost importance to achieve optimal patient outcomes. 3-dimensional imaging adds information for proper preoperative planning. CT scans have become the gold standard for this, but with the associated risk of radiation exposure to this generally younger patient cohort. Purpose. To determine if 3D-MR reconstructions of the hip can be used to accurately demonstrate femoral and acetabular morphology in the setting of femoroacetabular impingement (FAI) and development dysplasia of the hip (DDH) that is comparable to CT imaging. Materials and Methods. We performed a retrospective review of 14 consecutive patients with a diagnosis of FAI or DDH that underwent both CT and MRI scans of the same hip with 3D reconstructions. 2 fellowship trained musculoskeletal radiologists reviewed all scans, and a fellowship trained hip preservation surgeon separately reviewed scans for relevant surgical parameters. All were blinded to the patients' clinical history. The 3D reconstructions were evaluated by radiologists for the presence of a CAM lesion and acetabular retroversion, while the hip preservation surgeon also evaluated CAM extent using a clock face convention of a right hip, location of femoral head blood supply, and morphological anterior inferior iliac spine (AIIS) variant. The findings on the 3D CT reconstructions were considered the reference standard. Results. Of 14 patients, there were 9 females and 5 males with a mean age 32 (range 15–42). There was no difference in the ability of MRI to detect the presence of a CAM lesion (100% agreement between 3D-MR and 3D-CT, p=1), AIIS morphology (p=1, mode=type 1 variant), or acetabular retroversion (85.7%, p=0.5). 3D-MR had a sensitivity and specificity of 100 in detecting a CAM lesion relative to 3D-CT. Four CT studies were inadequate to adequately evaluate for presence of a CAM. Five CT studies were inadequate to evaluate for location of the femoral head vessels, while MRI was able to determine location in those patients. In the 10 remaining patients for presence of CAM, and nine patients for femoral head vessel location, there was no statistically significant difference between 3D-MR and 3D-CT in determining the location of CAM lesion on a clock face (p=0.8, mean MRI = 12:54, mean CT: 12:51, SD = 66 mins MR, 81 mins CT) or in determining vessel location (p=0.4, MR mean 11:23, CT mean 11:36, SD 33 mins for both). Conclusion. 3D MRI reconstructions are as accurate as 3D CT reconstructions in evaluating osseous morphology of the hip, and may be superior to CT in determining other certain clinically relevant hip parameters. 3D-MR was equally useful in determining the presence and extent of a CAM lesion, acetabular retroversion, and AIIS morphologic variant, and more useful than 3D CT in determining location of the femoral head vessels. In evaluating FAI or hip dysplasia, a 3D-MR study is sufficient to evaluate both soft tissue and osseous anatomy, sparing the need for a 3D CT scan and its associated radiation exposure and cost

Applying the concept of a regional trauma network to the UK paediatric trauma population has unique difficulties in terms of low patient volume and variation in paediatric service provision. In addition, no consensus exists as to which radiological investigations should be employed and an increasing trend towards computerised tomography raises concerns over radiation exposure. We carried out a retrospective review of all paediatric trauma calls from April 2010 and March 2013 around becoming a Major Trauma Centre. We aim to analyse the impact this has on trauma calls and assess the radiological investigations currently used in this population. The number of yearly paediatric trauma calls doubled during our study and totalled 132. The commonest mechanisms of injury were road traffic collisions, fall from a height or fall off a horse. 91.7% of children had some form of radiological investigation; 67% plain radiograph, 37.1% trauma CT, 21.2% focused CT and 5.3% abdominal ultrasound scan. Of the 77 CT scans performed 57.1% were reported as normal and 54.5% of these patients were discharged home the same day. Five children re-attended the emergency department within 30 days with two positive findings; a subdural haematoma and a tibial plateau fracture. The current use of harmful radiological investigations in paediatric trauma patients is not uniform. We propose implementation of radiology protocols and clinical guidance to imaging in paediatric trauma to limited radiation exposure

Computer assisted surgery (CAS) is used in trauma surgery to reduce radiation and improve accuracy but it is time consuming. Some trials for navigation in small bone fractures were made, but they are still experimental. One major problem is the fixation of the dynamic reference base for navigation. We evaluated the benefit of a new image based guidance-system (Surgix®, Tel Aviv, Israel) for fracture treatment in scaphoid bones compared to the conventional method without navigation. The system consists of a workstation and surgical devices with embedded radio opaque markers. These markers as well as the object of interest must be on the same C-arm shot. If a tool is detected in an image by the attached workstation additional information such as trajectories are displayed in the original fluoroscopic image to serve the surgeon as aiming device. The system needs no referencing and no change of the workflow. For this study 20 synthetic hand models (Synbone®, Malans, Switzerland) were randomised in two groups. Aim of this study was a central guide-wire placement in the scaphoid bone, which was blindly measured by using postoperative CT-scans. Significant distinctions related to the duration of surgery, emission of radiation, radiation dose, and trials of guide-wire positioning were observed. By using the system the surgery duration was with 50 % shortened (p = 0.0054) compared to the conventional group. One reason might be the significant reduction of trials to achieve a central guide-wire placement in the bone (p = 0.0032). Consequently the radiation exposure for the surgeon and the patient could be shortened by reduction of radiation emission (p = 0.0014) and radiation dose (p = 0.0019). By using the imaged based guidance system a reduction of surgery duration, radiation exposure for the patient and the surgeon can be achieved. By a reduced number of trials for achieving a central guide-wire position the risk of weakening the bone structure can be minimised as well by using the system. The system seems helpful where navigation is not applicable up to now. The surgical workflow does not have to be chanced

Introduction. The free hand technique remains the most popular method for distal locking; however, radiation exposure and increased operative time is a major concern. In an endeavor to overcome this concern, a new technique of distal locking with nail over nail technique is evaluated. Method. Seventy patients with femoral diaphyseal fractures treated by intramedullary nailing were divided in two groups: distal locking either with free hand technique (group 1) or with nail over nail technique (group II). Group I contained 35 patients (21 males and 14 females) with average age of 44.14 years. Group II contained 35 patients (19 males and 16 females) with average age of 45.7 years. In group II 1.5 mm of over-reaming was performed to avoid the nail deformation while insertion. Results. Average diameter of the nails used in free hand technique was 11.3 mm and 10.7 mm in nail over nail technique. Precision problems in insertion of distal interlocking screws occurred in 9 screws in group I and 11 screws in group II. The average number of images/exposures taken by image intensifier for nail insertion, for distal locking, and for the complete procedure in group I, were respectively 25.8, 24.2, and 50.08 compared with 24.8, 4.1 and 28.9, respectively in group II. All second distal (more proximal) holes were inserted successfully in group II. The statistically extremely significant decrease in radiation by 44% in the average total number of images required during the complete procedure was observed in nail over nail technique versus free hand technique. Conclusion. This prospective study on distal locking of femoral intramedullary nails shows that radiation exposures to achieve equivalent precision are reduced with the nail over nail technique as compared with the free hand technique. It can also be used when an image intensifier is unavailable or goes out of order peroperatively. However, over reaming of 1.5mm is the key to the success of technique as it avoids nail deformation during insertion. Level of evidence: therapeutic level IV

Utilization of C-arm fluoroscopy during direct anterior total hip arthroplasty (THA) is disruptive and potentially increases the risks of patient infection and cumulative surgeon radiation exposure. This pilot study evaluated changes in surgeon C-arm utilization during an initial 10 cases of direct anterior THA in which an imageless computer-assisted navigation device was introduced. This retrospective study includes data from 20 direct anterior THA cases performed by two orthopaedic surgeons (BC; SRE) in which an imageless computer-assisted navigation device was utilized (Intellijoint HIP®; Intellijoint Surgical, Waterloo, ON, Canada). Total C-arm image count was recorded in each case, and cases were grouped in sets of 5 for each surgeon. The mean C-arm image count was calculated for each surgeon, and combined C-arm image counts were calculated for the study cohort. Student's t-tests were used to assess differences. The use of intraoperative C-arm fluoroscopy decreased from a mean of 9.4 images (standard deviation [SD]: 8.6; Range: 3 – 23) to a mean of 2 images (SD: 2.9; Range: 0 – 7) for surgeon BC (P=0.10) and decreased from a mean of 10.75 images (SD: 1.2; range 9 – 12) to a mean of 6.7 images (SD: 8.3; range: 0 – 16) for surgeon SRE (P=0.36). Combined, an overall decrease in intraoperative C-arm image count from a mean of 11.3 images (SD: 6.9; range: 6 – 23) to a mean of 3.7 images (SD: 3.9; range: 0 – 8.5) was observed in the study cohort (P=0.06). The adoption of imageless computer-assisted navigation in direct anterior THA may reduce the magnitude of intraoperative C-arm fluoroscopy utilization; however further analysis is required