Aims. Scapular notching is thought to have an adverse effect on the outcome of reverse total shoulder arthroplasty (RTSA). However, the matter is still controversial. The aim of this study was to determine the clinical impact of scapular notching on outcomes after RTSA. Methods. Three electronic databases (PubMed, Cochrane Database, and EMBASE) were searched for studies which evaluated the influence of scapular notching on clinical outcome after RTSA. The quality of each study was assessed. Functional outcome scores (the Constant-Murley scores (CMS), and the American Shoulder and Elbow Surgeons (ASES) scores), and postoperative range of movement (forward flexion (FF), abduction, and external rotation (ER)) were extracted and subjected to meta-analysis. Effect sizes were expressed as weighted mean differences (WMD). Results. In all, 11 studies (two level III and nine level IV) were included in the meta-analysis. All analyzed variables indicated that scapular notching has a negative effect on the outcome of RTSA . Statistical significance was found for the CMS (WMD –3.11; 95% confidence interval (CI) –4.98 to –1.23), the ASES score (WMD –6.50; 95% CI –10.80 to –2.19), FF (WMD –6.3°; 95% CI –9.9° to –2.6°), and abduction (WMD –9.4°; 95% CI –17.8° to –1.0°), but not for ER (WMD –0.6°; 95% CI –3.7° to 2.5°). Conclusion. The current literature suggests that patients with scapular notching after RTSA have significantly worse results when evaluated by the CMS, ASES score, and range of movement in flexion and abduction. Cite this article: Bone Joint J 2020;102-B(11):1438–1445

Aims. The aim of this study was to analyze the association between the shape of the distal radius sigmoid notch and triangular fibrocartilage complex (TFCC) foveal tear. Methods. Between 2013 and 2018, patients were retrospectively recruited in two different groups. The patient group comprised individuals who underwent arthroscopic transosseous TFCC foveal repair for foveal tear of the wrist. The control group comprised individuals presenting with various diseases around wrist not affecting the TFCC. The study recruited 176 patients (58 patients, 118 controls). The sigmoid notch shape was classified into four types (flat-face, C-, S-, and ski-slope types) and three radiological parameters related to the sigmoid notch (namely, the radius curvature, depth, and version angle) were measured. The association of radiological parameters and sigmoid notch types with the TFCC foveal tear was investigated in univariate and multivariate analyses. Receiver operating characteristic curves were used to estimate a cut-off for any statistically significant variables. Results. Univariate analysis showed that the flat-face type was more prevalent in the patients than in the control group (43% vs 21%; p = 0.002), while the C-type was lower in the patients than in the control group (3% vs 17%; p = 0.011). The depth and version angle of sigmoid notch showed a negative association with the TFCC foveal tear in the multivariate analysis (depth: odds ratio (OR) 0.380; p = 0.037; version angle: OR 0.896; p = 0.033). Estimated cut-off values were 1.34 mm for the depth (area under the curve (AUC) = 0.725) and 10.45° for the version angle (AUC = 0.726). Conclusion. The proportion of flat-face sigmoid notch type was greater in the patient group than in the control group. The depth and version angle of sigmoid notch were negatively associated with TFCC foveal injury. Cite this article: Bone Joint J 2020;102-B(6):749–754

This study provides recommendations on the position of the implant in reverse shoulder replacement in order to minimise scapular notching and osteophyte formation. Radiographs from 151 patients who underwent primary reverse shoulder replacement with a single prosthesis were analysed at a mean follow-up of 28.3 months (24 to 44) for notching, osteophytes, the position of the glenoid baseplate, the overhang of the glenosphere, and the prosthesis scapular neck angle (PSNA). A total of 20 patients (13.2%) had a notch (16 Grade 1 and four Grade 2) and 47 (31.1%) had an osteophyte. In patients without either notching or an osteophyte the baseplate was found to be positioned lower on the glenoid, with greater overhang of the glenosphere and a lower PSNA than those with notching and an osteophyte. Female patients had a higher rate of notching than males (13.3% vs 13.0%) but a lower rate of osteophyte formation (22.9% vs 50.0%), even though the baseplate was positioned significantly lower on the glenoid in females (p = 0.009) and each had a similar mean overhang of the glenosphere. Based on these findings we make recommendations on the placement of the implant in both male and female patients to avoid notching and osteophyte formation. Cite this article: Bone Joint J 2013;95-B:530–5

The condylopatellar notch (CPN) represents the border between the patellofemoral articulation and the tibiofemoral articulation [Pao, 2001]. This could be a valuable landmark for establishing the boundaries of unicompartmental knee replacements. Its location on the distal femur has been described radiographically, but it has not, to our knowledge, been quantified with respect to anatomic landmarks [Hoffelner, 2015]. This study seeks to leverage a large database of computed tomography (CT) scans to quantify the location of the CPN with respect to well established anatomic landmarks of the knee. The analysis presented here used the custom CT based program SOMA (SOMA V.4.3.3, Stryker, Mahwah, NJ). SOMA contains a large database of 3D models created from CT scans. Anatomic analysis and implant fitting tools were also integrated into SOMA to perform morphometric analyses. 986 healthy distal femurs were analyzed. A coordinate system was established from the femoral head center, the intercondylar notch, and a morphological flexion axis (MFA). The MFA was created by iteratively fitting circles to the posterior condyles and creating and axis through the circles' centers. The sagittal plane was created normal to this axis and through the notch. A plane was created from the femoral head center and the flexion axis. A coronal plane was created from this plane and a point on the anterior cortex sulcus. Points were placed on a template bone model in the medial and lateral extents of the surface depressions of both the medial and lateral aspect of the CPN, where the depression of the CPN is most distinct. These points were then mapped to each of the 986 femoral specimens via a shape correspondence model. A line is created between the pairs of points representing the medial and lateral CPN's. The coordinates of the points are measured with respect to sagittal and coronal planes (Figure 1). Means and standard deviations of the anterior-posterior (AP) and medial-lateral (ML) coordinates of the CPN points are calculated. The mean coordinates for the lateral CPN line are (4.8±1.6, −33.6±6.8) and (29.1±5.4, −18.7±4.8). The mean coordinates for the lateral CPN are (−20.7±3.8, −2.2±4.4) and (−6.5±1.6, −29.7±3.2). The means with error bars representing two standard deviations are plotted on a scatter plot (Figure 2). Boxes representing the location of the CPN line for 95% of the population are included on the plots. Until now, the location of this anatomic feature of the knee has not been quantified with respect to known anatomical landmarks. The location of the CPN could serve as a valuable landmark for determining the border between the tibiofemoral and patellofemoral articulations. This data can be used to locate the CPN and inform the planning and design of compartmental knee replacements. For any figures or tables, please contact authors directly (see Info & Metrics tab above).

We hypothesised that an independent Notch Trial is essential on the same lines as other Component Trials-Femoral, Tibial and Patellar - in posterior stabilised total knee arthroplasty. Therefore we evolved Notch Trial to visually ascertain the adequacy of intercondylar resection and eliminate the possibility of femoral intercondylar fractures. We undertook a retrospective study to evaluate Notch Trial by the frequency of the need to remove osteophytes or file uneven surfaces in intercondylar resection by using the detachable box part of the trial femoral component, assess occurrence of distal femoral intercondylar fractures and demonstrate Notch Trial in posterior stabilised total knee replacement. We studied 206 patients, 113 females and 93 males, who underwent consecutive primary posterior stabilised total knee replacements applying Notch Trial between 2000 and 2008 in a District General Hospital under our team. Outcome Measurements were 1) frequency of the need to remove osteophytes or file uneven surfaces in intercondylar resection and 2) occurrence of distal femoral intercondylar fractures intraoperatively or on postoperative radiographs. We had to remove the osteophytes and file the cut surfaces in 183 (88.88%) of patients after Notch Trial. We had no distal femoral intercondylar fractures intraoperatively or on postoperative radiographs. Notch Trial allows the surgeon to directly visualise and ascertain the adequacy and precise fit of femoral notch cut with cam part of femoral component to ensure a press fit femoral component in condylar posterior cruciate substituting total knee replacement. Notch Trial prior to Femoral Component Trial effectively pre-empts intraoperative distal femoral intercondylar fractures. We recommend that Notch Trial should become part of the protocol for cruciate substituting total knee replacement and implants of all companies should have the option of a detachable box component for Notch Trial

Aims. The aims of this study were: firstly, to investigate the influence of the thickness of cartilage at the sigmoid notch on the inclination of the distal radioulnar joint (DRUJ), and secondly, to compare the sensitivity and specificity of MRI with plain radiographs for the assessment of the inclination of the articular surface of the DRUJ in the coronal plane. . Patients and Methods. Contemporaneous MRI images and radiographs of 100 wrists from 98 asymptomatic patients (mean age 43 years, (16 to 67); 52 male, 53%) with no history of a fracture involving the wrist or surgery to the wrist, were reviewed. The thickness of the cartilage at the sigmoid notch, inclination of the DRUJ and Tolat Type of each DRUJ were determined. . Results. The assessment using MRI scans and cortical bone correlated well with radiographs, with a kappa value of 0.83. The mean difference between the inclination using the cortex and cartilage on MRI scans was 12°, leading to a change of Tolat type of inclination in 66% of wrists. No reverse oblique (Type 3) inclinations were found when using the cartilage to assess inclination. . Conclusion . These data revealed that when measuring the inclination of the DRUJ using cartilage, reverse oblique inclinations might not exist. The data suggest that performing an ulna shortening osteotomy might be reasonable even in distal radioulnar joints where the plain radiographic appearance suggests an unfavourable reverse oblique inclination in the coronal plane. We recommend using MRI to validate radiographs in those that appear to be reverse oblique (Tolat Type 3), as the true inclination might be different, thereby removing one possible contraindication to ulnar shortening. Cite this article: Bone Joint J 2017;99-B:369–75

Purpose: We hypothesised that independent Notch Trial is essential on same lines as other Component Trials – Femoral, Tibial and Patellar – in posterior stabilised total knee arthroplasty and evolved Notch Trial to visually ascertain adequacy of intercondylar resection and eliminate femoral intercondylar fractures. We undertook a retrospective study to evaluate Notch Trial by the frequency of the need to remove osteophytes or file uneven surfaces in intercondylar resection by using detachable box part of trial femoral component and occurrence of distal femoral intercondylar fractures. Methods & Results: We studied 206 patients, 113 females and 93 males, who underwent consecutive primary posterior stabilised total knee replacements applying Notch Trial between 2000 and 2008 under our team. Outcome Measurements were. frequency of osteophyte removal or filing uneven surfaces in intercondylar resection and. distal femoral intercondylar fractures intraoperatively or on postoperative radiographs. We had to remove osteophytes and file cut surfaces in 183 (88.88%) patients after Notch Trial. We had no distal femoral intercondylar fractures. Conclusions: Notch Trial allows the surgeon to directly visualise and ascertain adequacy and precise fit of femoral notch cut with cam part to ensure press fit femoral component in condylar posterior cruciate substituting total knee replacement. Notch Trial prior to Femoral Component Trial effectively pre-empts intraoperative distal femoral intercondylar fractures. We recommend that Notch Trial should become part of the protocol for cruciate substituting total knee replacement and implants of all companies should have the option of a detachable box component for Notch Trial

The shape of the glenoid can vary between pear and oval, depending on the presence of a glenoid notch. We measured the glenoid notch angle (the angle between the superior and inferior part of the anterior glenoid rim) in 53 embalmed cadavers and investigated its relationship with the labral attachment to the glenoid at that point. The attachment of the anterosuperior labrum at the site of the glenoid notch was classified as tight or loose or, in some cases, there was a sublabral foramen. The anterior labrum was then removed and digital images perpendicular to the glenoid notch were taken. Using a digital image analysis program, the angle of the glenoid notch was measured. In 37 shoulders (70%) the attachment of the labrum at the site of the glenoid notch was assessed as tight and in eight (15%) as loose. In eight shoulders (15%) a sublabral foramen was found. The mean glenoid notch angle was 153° in the loosely attached group, 159° in the sublabral foramen group and 168° in the group with a tight attachment. The presence of a glenoid notch was noted only when the glenoid notch angle was less than 170°. The glenoid notch angle is related to the attachment of the labrum. In the presence of a glenoid notch, there is more likely to be a loosely attached labrum or sublabral foramen. The loose attachment of the anterosuperior labrum may be a predisposing factor in traumatic anterior instability

Multiple myeloma (MM) is an incurable hematological tumor stemming from malignant plasma cells. MM cells accumulate in the bone marrow (BM) and shape the BM niche by establishing complex interactions with normal BM cells, boosting osteoclasts (OCLs) differentiation and causing bone disease. This unbalance in bone resorption promotes tumor survival and the development of drug resistance. The communication between tumor cells and stromal cells may be mediated by: 1) direct cell-cell contact; 2) secretion of soluble factors, i.e. chemokines and growth factors; 3) release of extracellular vesicles/exosomes (EVs) which are able to deliver mRNAs, miRNAs, proteins and metabolites in different body district. Primary CD138+ MM cells were isolated from patients BM aspirates. MM cell lines were cultured alone in complete RPMI-1640 medium or co-cultured with murine (NIH3T3) or human (HS5) BMSC cell lines or murine Raw264.7 monocytes in DMEM medium supplemented with 10% V/V FBS. Silencing of Jagged1 and Jagged2 was obtained by transient expression of specific siRNAs or by lentiviral transduction using a Dox-inducible system (pTRIPZ). EVs were isolated using differential ultracentrifugation. EVs concentration and size were analyzed using Nano Track Analysis (NTA) system. The uptake of PKH26-labelled MM-derived EVs by HS5 or Raw264.7 was measured after 48 hours by confocal microscopy and flow cytometry. Osteoclast (OCL) differentiation of Raw264.7 cells was induced by 50ng/ml mRANKL, co-culturing with MM cells, CM or EVs. OCLs were stained by TRAP Kit and counted. Bone resorption was assessed by Osteo Assay Surface plates. Flow cytometric detection of apoptotic cells was performed after staining with Annexin V. Gene expression was analyzed by qRT-PCR, while protein levels were determined using flow cytometry ELISA or WB. Notch oncogenic signaling is dysregulated in several hematological and solid malignancies. Notch receptors and ligands are key players in the crosstalk between tumor cells and BM cells. We have demonstrated that: 1) the dysregulated Jagged ligands on MM cells trigger the activation of Notch receptors in the nearby stromal cells by cell-cell contact. This results in the release of anti-apoptotic and growth stimulating factors, i.e. IL6 and SDF1; 2) MM cells promote the development of bone lesions boosting osteoclast differentiation by secreting soluble factors (i.e. RANKL) and by the activation of Notch signaling mediated by direct contact with osteoclast precursors; 3) Finally, we present evidences that EVs play a crucial role in the dysregulated interactions of MM cells with the microenvironment and that Notch signaling regulates their release and participate in this cross-talk. These evidences supports the hypothesis that Jagged targeting on MM cells may interrupt the communication between tumor cells and the surrounding milieu, blocking the activation of the oncogenic Notch pathway and finally resulting in the a reduction of MM-associated bone disease and drug resistance

We have investigated whether shape of the knee can predict the clinical outcome of patients after an anterior cruciate ligament rupture. We used statistical shape modelling to measure the shape of the knee joint of 182 prospectively followed patients on lateral and Rosenberg view radiographs of the knee after a rupture of the anterior cruciate ligament. Subsequently, we associated knee shape with the International Knee Documentation Committee subjective score at two years follow-up. The mean age of patients was 31 years (21 to 51), the majority were male (n = 121) and treated operatively (n = 135). We found two modes (shape variations) that were significantly associated with the subjective score at two years: one for the operatively treated group (p = 0.002) and one for the non-operatively treated group (p = 0.003). Operatively treated patients who had higher subjective scores had a smaller intercondylar notch and a smaller width of the intercondylar eminence. Non-operatively treated patients who scored higher on the subjective score had a more pyramidal intercondylar notch as opposed to one that was more dome-shaped. We conclude that the shape of the femoral notch and the intercondylar eminence is predictive of clinical outcome two years after a rupture of the anterior cruciate ligament. Cite this article: Bone Joint J 2014;96-B:737–42

Objective. In this study, we aim to compare total bone amount extracted in total knee arthroplasty in implant design and the bone amount extracted through intercondylar femoral notch cut. Material and Method. In this study, we implemented 10 implants on a total of 50 sawbones from 5 different total knee arthroplasty implant brands namely Nex-Gen Legacy (Zimmer, Warsaw, IN, USA), Genesis 2 PS (Smith&Nephew, Memphis, TN, USA), Vanguard (Biomet Orthopedics Inc., Warsaw, IN, USA), Sigma PS (De Puy, Johnson&Johnson, Warsaw, IN, USA), Scorpio NRG PS (Stryker Co., Kalamazoo, USA). Equal or the closest sizes of each brand on anteroposterior plane were selected, and cuts were made following standard technique(see Fig 1 and 2). Extracted bone pieces were measured in terms of volume and length on three planes, and statistically analysed. The volume of all pieces available after each femoral incision was measured according to Archimedes’ principles. Furthermore, the volume of each intercondylar femoral notch pieces was measured separately from other pieces but with the same method. The measurement of intercondylar femoral notch pieces on 3 planes (medial-lateral, anterior-posterior, superior-inferior) was made using Kanon slide gauge (Ermak Ltd, Istanbul, TR). Femoral notch incision pieces were scanned with CAD/CAM technology using three-dimensional scanner 1 SeriesTM (Dental Wings Inc, Montreal, QC, Canada), and the measurements were confirmed with DWOS CAD 4.0.1 software (Dental Wings Inc, Montreal, QC, Canada)(see figure 3a-e). The volume of 10 intercondylar femoral notch pieces performed through the set of each brand was averaged, and considered as the incision volume of that particular brand. Results. The comparison made by excluding femoral notch cuts did not produce any statistically significant difference between the amounts of bone extracted. The least volumetric value measured in extracted intercondylar femoral notch cut was obtained using Vanguard (3,6±0,4 cm3). The gradually increasing volumes were obtained from Nex-Gen (3,7±0,5 cm3), Sigma (5,7±0,4 cm3), Genesis 2 (6,3±0,3 cm3) and Scorpio NRG (6,7±0,7 cm3), respectively. There was no statistical difference between Genesis 2 and Scorpio NRG, and between Nex-Gen and Vanguard. Conclusion. There are significant differences among implant designs in terms of preserving bone stock, and much of these differences stems from intercondylar femoral notch incision

We undertook a study on eight arms from fresh cadavers to define the clinical usefulness of the lesser sigmoid notch as a landmark when reconstructing the length of the neck of the radius in replacement of the head with a prosthesis. The head was resected and its height measured, along with several control measurements. This was compared with in situ measurements from the stump of the neck to the proximal edge of the lesser sigmoid notch of the ulna. All the measurements were performed three times by three observers acting independently. The results were highly reproducible with intra- and interclass correlations of > 0.99. The mean difference between the measurement on the excised head and the distance from the stump of the neck and the lesser sigmoid notch was −0.02 mm (−1.24 to +0.97). This difference was not statistically significant (p = 0.78). The proximal edge of the lesser sigmoid notch provides a reliable landmark for positioning a replacement of the radial head and may have clinical application

Purpose: This study was conducted to analyse the importance of the Malgaigne notch and its position on standard x-rays taken in internal rotation or on arthroscan in patients treated for anterior instability of the shoulder. Our purpose was to search for criteria perdictive of outcome of arthroscopic stabilisation of the shoulder joint using the Bankart method. Material and methods: Fifty-four patients were reviewed to determine the postoperative Duplay score. Mean follow-up was 68 months (32–100). Mean age at surgery was 29 years. We divided the patients into three populations as a function of preoperative symptoms: population A two dislocations or more, population B one dislocation then episodes of subluxation, population C no dislocation but pain. We divided this population according to the Duplay score. Group 1 patients had a fair or poor outcome, Group 2 patients had a good or excellent outcome. We reviewed 54 radiograms using patterns of increasing size (mm by mm) to assess the radius of the humeral head and the depth of the notch. We evaluate the reproducibility of this method by comparing the readings of ten senior orthopaedic surgeons. There were no false positives or false negatives. Variance of the measures taken by the ten surgeons was 0.67 at 1.31 mm, a small variance. We compared the ratio between the radius of the humeral head and the depth of the notch in the different groups. Results: The Malgaigne notch was significantly deeper in population A (19%) than in population B (14%) or population C (14.3%). This suggests that the size of the notch has an effect on symptomatology of shoulder instability. The notch was also significantly deeper in group 1 patients (fair or poor outcome) (21%) than in group 2 (good or excellent outcome) (16%) (p=0.05). Discussion: Beyond a threshold set at 15%, there were 54% fair or poor results. The position of the notch in height was significantly different in population A compared with populations B and C (p=0.01). It appears to be higher in case of true recurrent dislocation. We did not demonstrate any statistical link between the position of the notch on the CT scan and surgical outcome. This study demonstrates the importance of information on the internal rotation images in choosing the proper type of surgery for shoulder instability

Background: The orientation and the position of glenoid are two factors which have been pointed out as a cause of notch in case of reverse shoulder arthroplasty (RSA). Our hypothesis is that the notch is mostly depending on the relationship between the humerus and the glenoid. Material and method: The inclusion criteria of this prospective study were: RSA with a 2 years minimum follow up, pre and post op x-rays of good quality to allow accurate measurements, a minimum of 3 x-rays regularly separated in the first 2 years. On these x-rays, done at rest, we have analyzed: the vertical orientation of the glenoid, the degree of abduction of the humerus, the gleno-metaphyseal angle (GMA) which represents the relationship between glenoid and humerus. Sixty one shoulders in 60 patients (57 females, 7 males) have been included. The mean age was 74,6 y.o (56–82) and the mean body mass index (BMI) was 25,4 (16–36). Results: The patients with a notch had a significant correlation with a lower BMI (p< 0,001), a more upward pre op orientation of glenoid (p< 0,01), a less downward post op orientation of the glenoid, a lower degree of abduction of the humerus (p< 0,01), a lower GMA (p< 0,001) that means either that the humerus is less abducted or that the glenoid is orientated more upward or both. In addition we found a strongly correlation between the BMI and the degree of abduction of humerus which is lower if the BMI is low (p< 0,001). We studied the evolution of the angles and we noted that there was no difference during the first 3 months. After 3 months, the GMA stayed stable in patients without notch but was decreasing during the first year in those with a notch. Discussion: The occurrence of a notch is strongly increased in patients with a lower BMI because of a less degree of abduction of the humerus, mostly if the glenoid is orientated upward. So the relationship between humerus and glenoid is more important to analyse than position of glenoid alone. The BMI is another important factor to take into account in case of indication of RSA because the risk of occurrence of a notch is quite higher

Introduction:. Successful total joint arthroplasty requires accruate and reproducible acetabular component position. Acetabular component malposition has been associated with complications inlcuding dislocation, implant loosening, and increased wear. Recent literature had demonstrated that high-volume fellowship trained arthroplasty surgeons are in the “safe zone” for cup inclination and anteversion only 47% of the time. (1) Computer navigation has improved accuracy and reproducibility but remains expensive and cumbersome to many hospital and physicians. Patient specific instrumentation (PSI) has been shown to be effective and efficient in total knee replacements. The purpose of this study was to determine in a cadaveric model the anteversion and inclination accuracy of acetabular guides compared to a pre-operitive plan. Methods:. 8 fresh-frozen cadaveric pelvis specimens underwent Computer Tomography (CT) in order to create a 3D reconstruction of the acetabulum. Based on these 3D reconstruction, a pre-operative plan was made positioning the patient specific acetabulum guides at 40 degrees of inclination and 20 degrees of anteversion in the pelvis.(Figure 1) The guides were created based on the specific bony morphology of the acetabular notch and rim. The guides were created using a 3D printer which allowed for precise recreation of the virtual model. 7 cadaveric specimens underwent creation and implantation of a acetabular guide specific to each specimens bony morphology. Ligamentum, pulvinar, and labum were removed for each cadaver prior to implantation to prevent soft tissue obstruction. The guides were inserted into the acetabular notch with the final position based on the fit of the guide in the notch. (Figure 2) Post-implantation CT was then performed and inclination and anteversion of the implanted guide measured and compared to the preoperative plan. Results:. In 7 cadaveric specimens post-implantation CT scans were performed and anteversion and inclindation of each guide was calculated and compared to pre-operative plan of 20 degrees anteversion and 40 degrees of inclincation. On average, anteversion in the 7 cadavers measured 20.9 degrees with a standard deviation of 1.8 degrees. Inclincation measured 37.8 degrees with a standard deviation of 3.5 degrees. (Figure 3). Discussion and Conclusion:. This study demonstrates a proof of concept that patient specific acetabular guides based on pre-operative CT scans and implanted in the human pelvis accurately reproduce the preoperative plan. Guide position was 20.9 degrees of anteversion and 37.8 degrees of inclination with a SD of 1.8 and 3.5 degrees respectively. Soft tissue obstruction may result in increased error in some specimens. This study demonstrates that patient specific models can be made and implanted based on notch fit geometry. Further study is currently underway to using a instrument based on the angle of the cup face is order to guide final cup implanation

It has been suggested that an increased posterior tibial slope (PTS) and a narrow notch width index (NWI) increase the risk of anterior cruciate ligament (ACL) injury. The aim of this study was to establish why there are conflicting reports on their significance. A total of fifty patients with a ruptured ACL and 50 patients with an intact ACL were included in the study. The group with ACL rupture had a statistically significantly increased PTS (p < 0.001) and a smaller NWI (p < 0.001) than the control group. When a high PTS and/or a narrow NWI were defined as risk factors for an ACL rupture, 80% of patients had at least one risk factor present; only 24% had both factors present. In both groups the PTS was negatively correlated to the NWI (correlation coefficient = -0.28, p = 0.0052). Using a univariate model, PTS and NWI appear to be correlated to rupture of the ACL. Using a logistic regression model, the PTS (p = 0.006) and the NWI (p < 0.0001) remain significant risk factors. From these results, either a steep PTS or a narrow NWI predisposes an individual to ACL injury. Future studies should consider these factors in combination rather than in isolation

We present simple but effective retractors used in pairs to expose the sciatic notch during Salter innominate osteotomy. We have found them to be useful for a wide range of procedures requiring similar exposure. We present them here in tribute to the memory of the designer Mercer Rang

In the first few months of life, a notch may be seen on radiographs of the superolateral margin of the infant hip. It may be associated with a steeply inclined acetabular roof and may be an indicator of persistent neonatal instability or displacement of the femoral head

Purpose. The purpose of this study was to determine whether intra-operative identification of osseous ridge anatomy (lateral intercondylar “residents” ridge and lateral bifurcate ridge) could be used to reliably define and reconstruct individuals' native femoral ACL attachments in both single-bundle (SB) and double-bundle (DB) cases. Methods. Pre-and Post-operative 3D, surface rendered, CT reconstructions of the lateral intercondylar notch were obtained for 15 patients undergoing ACL reconstruction (11 Single bundle, 4 Double-bundle or Isolated bundle augmentations). Morphology of native ACL femoral attachment was defined from ridge anatomy on the pre-operative scans. Centre's of the ACL attachment, AM and PL bundles were recorded using the Bernard grid and Amis' circle methods. During reconstruction soft tissue was carefully removed from the lateral notch wall with RF coblation to preserve and visualise osseous ridge anatomy. For SB reconstructions the femoral tunnel was sited centrally on the lateral bifurcate ridge, equidistant between the lateral intercondylar ridge and posterior cartilage margin. For DB reconstructions tunnels were located either side of the bifurcate ridge, leaving a 2mm bony bridge. Post-operative 3D CTs were obtained within 6 weeks post-op to correlate tunnel positions with pre-op native morphology. Results. Pre-op native ACL attachment site morphology was very similar to previous in-vitro studies: the mean centre was found at 27% along Blumensaat's line (range 19-33%) and 38% the width of the lateral femoral condyle (range 31-43%). Despite the variability between individuals there was close correlation between pre-operative localization of the femoral attachment centre and position of single bundle ACL reconstructions tunnels on the post-op CT (R=0.92). Similar results were observed for double-bundle and isolated bundle augment reconstructions. Conclusion. ACL attachment site morphology varies between individuals. Intra-operative localization of the osseous landmarks (lateral intercondylar and bifurcate ridges) appears to lead to accurate, individualised anatomical tunnel placement whether using single or double-bundle reconstruction techniques

We describe five patients, seen since 1984, with posterior shoulder pain and isolated wasting and weakness of the infraspinatus. In four of these a ganglion in the spinoglenoid notch was demonstrated by MRI and in one recent case ultrasound scans were positive. Three patients have been treated by operation, but there was recurrence in one after five years. In each confirmed case, the ganglion straddled the base of the spine of the scapula, extending into both supraspinatus and infraspinatus fossae. The nerve was either compressed against the spine or stretched over the posterior aspect of the ganglion. Adequate surgical exposure is essential to preserve the nerve to the infraspinatus and to allow complete removal of the ganglion. This is difficult because of the location and thin-walled nature of the cysts