We describe the association between post-operative femoral stem radiological appearances and aseptic failure of THA (total hip arthroplasty) following a retrospective review of records and radiographs of all patients attending for follow-up between August 2002 and August 2003 who had a cemented Charnley femoral stem and either a cemented polyethylene acetabular cup inserted. Femoral stem aseptic loosening was defined either by findings at revision surgery, the definite radiographic loosening criteria of Harris or progressive endosteal cavitation across zones as described by Gruen. Well-fixed control THAs were defined as those that demonstrated none of the radiographic features of aseptic loosening or ‘at risk’ signs as described by Wroblewski. Parameters measured were: Alignment, Barrack grade of cementation, cement mantle width of the cement mantle and the presence and width of any radiolucent lines. Sixty-three hips were entered into the aseptic failure group and 138 into the control group. The alignment of the femoral stem was not associated with failure (p=0.283). Thickness of the cement mantle was statistically associated with failure in Gruen zones 6 (p=0.040) and Gruen zone 7 (p=0.003). A significant association for the presence of radiolucent lines was found for Gruen zones 3 (p=0.0001) and 5 (p=0.0001). The grade of cementation as measured by the Barrack grade was strongly associated with failure for grades C (p=0.001) and D (p=0.001). This study has demonstrated that easily applied radiological criteria can be used to identify ‘at risk’ Charnley THAs from the immediate post-operative AP radiograph

Mid and long-term follow-up of Charnley total hip arthroplasty (THA) demonstrated good functional results with 85% survivorship at 25-year follow-up. However dislocation still remains an unsolved problem. Dislocation may occur all along the patient and implant life. The aim of this study is to answer the question: does Dual Mobility Cup (DMC) decrease the dislocation risk? . Method. : We report comparative results at ten years of follow-up of 2 groups of primary cemented Charnley-type THA, one with a standard polyethylene cup (group 1, n=215) and the other one with a DMC (group 2, n=105). . Results. : In group 1, twenty-six dislocations (12.9%) occurred. In group 2 only one dislocation (0.9%) occurred. This dislocation was successfully reduced by close reduction, without any recurrence. This difference was statistically significant (p=0.0018). In group 1, reason for revision was recurrent dislocation in twenty one cases. Five patients have been revised for other reasons. The global revision rate was 12.9%. In group 2, two patients needed revision surgery for aseptic loosening. The global revision rate was 2.1%. This difference was statistically significant (p=0.0054). The goal was reached for the patients of group 2 who had more risks factors of dislocation (age, aetiology, ASA and Devane scores) than those of group 1. When using a DMC, we observed a low rate of dislocation in primary THA (0.9%). This surgical choice seems to be a secure and effective technique in Charnley-type THA, especially in a high risk population

The effectiveness of total hip replacement as a surgical intervention has revolutionized the care of degenerative conditions of the hip joint. However, the surgeon is still left with important decisions in regards to how best deliver that care with choice of surgical approach being one of them especially in regards to the short-term clinical outcome. It is however unclear if a particular surgical approach offers a long-term advantage. This study aims to determine the influence of the three main surgical approaches to the hip on patient reported outcomes and quality of life after 5 years post-surgery. We extracted from our prospective database all the patients who underwent a Total Hip Replacement surgery for osteoarthritis or osteonecrosis between 2008 and 2012 by an anterior, posterior or lateral approach. All the pre-operative and post-operative HOOS (Hip disability and Osteoarthritis Outcome Score) and WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index) scores were noted. Analysis of covariance (ANCOVAs) were used to study the relationship between amount of change in HOOS and WOMAC subscales (dependant variables) and approach used, by also including confounding factors of age, gender, ASA (American Society of Anaesthesiologists) score, Charnley score and Body Mass Index. A total of 1895 patients underwent a primary total hip arthroplasty during the considered period. Among them, 367 had pre-operative and ≥5 years post operative PROM scores (19.47%). The mean follow-up for the study cohort was 5.3 years (range 5 to 7 years) with, 277 at 5 years, 63 at 6 years, and 27 at 7 years. In the posterior approach group we had 138 patients (37.60%), 104 in the lateral approach (28.34%) and 125 in the anterior approach (34.06%). There were no significant differences between the 3 groups concerning the Charnley classification, BMI, Gender, ASA score, side and pre-operative functional scores. We did not observe any significant difference in the amount of change in HOOS and WOMAC subscales between the 3 groups. There were no differences either in the post-operative scores in ultimate value. Our monocentric observational study shows that these three approaches provide predictable and comparable outcomes on HRQL and PROMs at long-term follow-up both in terms of final outcome but also in percent improvement. This study has several limitations. We excluded patients who underwent revision surgery leaving the unanswered question of how choice of surgical approach could lead to different revision rates, which have an impact on the functional outcomes. Moreover, even if we controlled for the most important confounders by a multivariate analysis model, there is still some involved cofounders, which could potentially lead to a bias such as smoking, socio-economical status or femoral head diameter. But we do not have any reason to think that these parameters could be unequally distributed between the three groups. Finally, our study cohort represents of 19.47% of the complete cohort. The fact that not all patients have PROM's was pre-determined as eight years ago we instituted that only 1 in 5 patients that returned their pre-operative questionnaire would get their PROM's at follow-up. Despite this, our statistical power was sufficient

Recently, new metallurgical techniques allowed the creation of 3D metal matrices for cementless acetabular components. Among several different products now available on the market, the Biofoam Dynasty cup (MicroPort Orthopedics® Inc., Arlington, TN, USA) uses an ultraporous Titanium technology but has never been assessed in literature. Coping with this lack of information, our study aims to assess its radiological osteointegration at two years in a primary total hip arthroplasty and compares it to a successful contemporary cementless acetabular cup. This monocentric retrospective study includes 96 Dynasty Biofoam acetabular components implanted between March 2010 and August 2014 with a minimum 2 years radiographic follow-up. Previous acetabular surgery, any septic issue or re-operation for component malposition were exclusion criteria. They were compared to 96 THA using the Trident PSL matched for age, gender, BMI and follow-up. Presence of radiolucencies and sclerotic lines were described on AP pelvis views using the classification of DeLee and Charnley. There was no statistical difference between the two groups concerning demographics and mean follow-up (p> 0.05). Shell's anteversion was similar but inclination was greater in the biofoam group (p=0.006). 27,17% of the Biofoam shells presented radiolucencies in 2 zones or more and 0% of the Trident shells. 11,96% of Biofoam cups showed radiolucencies in the 3 zones of DeLee comparing to 0% of the Trident cups. There was no statistical difference between the Biofoam group (n=54/96) and the Trident PSL group (n=57/96) in pre-operative functional scores for both WOMAC subscales and SF-12. When evaluating last follow-up PROM's, no significant differences were found comparing the entirety of both groups, 56 Biofoam and 51 Trident PSL. No difference was found either when comparing Biofoam patients with ³ 2 zones of radiolucencies (n=15) to the whole Trident group (n=51). This study raises concerns about radiologic evidence of osteointegration of the Biofoam acetabular cup. Nevertheless, these radiological findings do not find any clinical correlation considering clinical scores. Thus, it may question the real meaning of these high-rated radiolucencies, which at first sight reflect a poorer osteointegration. The first possible limitation with this study is an overinterpretation of the radiographs. Nevertheless, both observers were blinded regarding the patients groups and clinical outcomes and there was a strong inter-observer reliability. Although both cohorts were matched on their demographics and were similar on the cup anteversion, we noticed a slightly lower abduction angle in the Biofoam population. It could reduce the bone-implant coverage area and hence hinders the bony integration, but this difference was small and both groups remained in the Lewinneck security zone. Furthermore, even if patients were matched on age, gender, BMI and follow-up, other variables can influence early osteointegration (smoke status, osteoporosis) and have not been controlled even though we have no reasons to think their distribution could differ in the 2 groups. The real clinical meaning of these findings remains unknown but serious concerns are raised about the radiographic osteointegration of the Dynasty Biofoam acetabular components. Concerns are all the more lawful that this implants aim to enhance osteointegration

Background. Highly porous acetabular components are widely used in revision hip surgery. The purpose of this study is to compare the mid-term survivorship, clinical and radiological outcomes of a hemispherical cup (Stryker Tritanium Revision component) and a peripherally expanded cup (Zimmer TM modular component) in revision hip surgery. Methods. Between 2010 and 2017, 30 patients underwent revision hip replacement using a hemispherical cup and 54 patients using a peripherally expanded cup. The surgery was carried out by two arthroplasty surgeons, both fellowship-trained in revision hip surgery. Kaplan-Meier analysis was used to determine the survivorship of the components. Clinical outcomes were measured using the Oxford Hip Score. Radiographs were analysed for the presence of radiolucent lines in the DeLee and Charnley zones. Results. Follow up of both components ranged from 2 – 8 years. All the hemispherical cups were reinforced with screws whilst 86% of the peripherally expanded cups required screws. Four (13%) of the hemispherical cups required re-revision surgery for aseptic loosening. One (2%) of the peripherally expanded cups was revised for dislocation, but none for aseptic loosening. None of the peripherally expanded cups exhibited significant radiolucency as compared to 8 (27%) hemispherical cups. The mean Oxford Hip Score of the hemispherical and peripherally expanded cups was 38 and 40 respectively. Using revision for any cause as the end, survivorship of the hemispherical cups at 7.6 years was 80.66% while the peripherally expanded cups at 8.2 years was 98.15%. Conclusions. In our case-series, a peripherally expanded cup has shown a better mid-term radiological and clinical result, with a lower rate of re-revision surgery, when compared to a hemispherical cup

The surgical approach that is adequate for a primary total hip replacement may need to be modified to achieve a more extensile exposure as required for the revision procedure. A straightforward revision total hip replacement procedure can become quite complex when implant removal is attempted without adequate skill, instrumentation, or exposure. The most commonly used approaches in total hip replacement revision surgery are the transtrochanteric, posterolateral, and anterolateral. Although the effects of these approaches on the long-term clinical survival of the prosthetic composite are not completely clear, surgical approach does affect dislocation rates, trochanteric nonunion rates, and other indicators of clinical success. Transtrochanteric Approach - Three variations of the transtrochanteric approach exist: A) The classic Charnley trochanteric approach was popularised by virtue of its use in primary total hip arthroplasty (THA) and, therefore, was easily applied to revision THA. This approach allows excellent visualization of the lateral shaft of the femur, thus enhancing implant and cement removal. However, the classic Charnley approach is associated with a high incidence of trochanteric nonunion. Reattachment of the atrophied trochanteric fragment often requires adjunct fixation such as cables, hooks, or bolts. These devices can subsequently break, migrate, or generate particulate debris which, in turn, is capable of producing extensive granuloma. B) The trochanteric slide is accomplished by an anteromedial inclination of the osteotomy, thus providing a more stable interface for reattachment. The trochanteric slide offers the advantage of maintaining muscle continuity. The disadvantage of this technique is decreased visualization of the acetabulum. Adjunct fixation of the trochanter is also required with this approach. C) By creating a 6 cm to 12 cm distal extension to the trochanteric fragment, a large lateral window is developed which enhances both prosthesis and cement removal. Subsequently, trochanteric fixation is enhanced because the extended fragment increases the surface area available for fixation. Because the extended trochanteric osteotomy requires a larger bone resection, proximal femoral bone stock can be compromised. As a result, proximal prosthetic support with a tapered device can force the trochanteric fragment laterally, increasing the likelihood of nonunion. When an extended trochanteric osteotomy is used, the patient's postoperative physical therapy and rehabilitation course should be modified to protect the healing trochanteric fragment. Posterolateral Surgical Approach is used commonly in revision THA. The technique is popular because it is used widely for endoprosthetic replacement in the treatment of subcapital fractures. Also, the posterolateral approach is quite popular for primary THA. This approach has the advantage of maintaining the integrity of the abductor mechanism. Although femoral exposure is adequate, acetabular exposure can be limited. Also, this approach is associated with an increased incidence of dislocation. Another concern is its close proximity to the sciatic nerve, thus predisposing the patient to the risk of nerve injury. Anterolateral Surgical Approach has the advantage of improved visualization of the acetabulum and femur without the attending trochanteric complications and proximity to the sciatic nerve. This approach is associated with a low incidence of dislocation. However, the abductor muscle is divided or split and, therefore, abductor dysfunction can occur post-operatively. There also can be an increased incidence of heterotopic ossification, but it avoids the problem of trochanteric nonunion

Introduction. We have investigated middle-term clinical results of total hip arthroplasty (THA) cemented socket with improved technique using hydroxyapatite (HA) granules. IBBC (interfacial bioactive bone cement method, Oonishi) (1) is an excellent technique for augmenting cement-bone fixation in the long term. However, the technique is difficult and there are concerns over some points, such as bleeding control, disturbance of cement intrusion to anchoring holes by granules, difficulty of the uniform granular dispersion to the acetabular bone. To improve the original technique, we have modified IBBC (M-IBBC), and investigated the middle-term clinical results and radiographic changes. Materials and Methods. K-MAX HS-3 THA (Kyocera, Japan), with tapered cemented stem with small collar and all polyethylene cemented socket, was used for THA implants (Fig.1). Basically the third generation cementing technique was used for THA using bone cement. The socket fixation was performed with bone cement (Endurance, DePuy) and HA granules (Ca10(PO4)6(OH)2, Boneceram P; G-2, 0.3–0.6mm in size, Olympus, Japan) (Fig.2). In original IBBC technique, HA granules were dispersed on reamed acetabulum before cementing. In M-IBBC technique, HA granules were attached to bone cement on plastic plate, then inserted to reamed acetabulum and pressurized (Fig.3). 112 hip joints (95 cases) were operated between June 2010 and March 2014, and followed. The average follow-up period was 6.5 years, and average age at operation was 66.5 years. The clinical results were evaluated by Japan Orthopaedic Association Hip Score (JOA score), and X-p findings were evaluated using antero-posterior radiographs. The locations of radiolucent lines were identified according to the zones described by Delee and Charnley for acetabular components, and Zone 1 was divided into two parts, outer Zone 1a and inner Zone 1b. Results and Discussion. Revision was not performed. JOA score improved from 47 to 88. Socket and stem loosening was not observed. X-p findings of sockets demonstrated radiolucent line in Zone 1a/1b/2/3 in 0.9/0/0/0% immediately after the operation, 6.3/1.8/0/0.9% at 2 years postoperatively. After 2 years there was no progressive change, however, improvement of radiolucent line in Zone 1a was observed in two cases after 3 years postoperatively. Accordingly, at 5 years radiolucent line in Zone 1a/1b was observed in 4.4/1.8%. Oonish has reported excellent clinical results of THA with IBBC (1). To easily perform IBBC, we have modified the technique, improving the problems of IBBC. In this study, radiolucent line was observed at the margin of the socket in a small number of cases, and there was no progressive change. In addition, improvement of radiolucent line was observed in M-IBBC in this study, which was not observed in conventional cementing technique. Conclusions. It is demonstrated that M-IBBC provides stable socket cement fixation for THA. The interesting finding in M-IBBC cases was the improvement of radiolucent line, suggesting osteoconductive property of hydroxyapatite granules at the interface after the operations. The promising long-term clinical results of M-IBBC method, were expected. For any figures or tables, please contact the authors directly

Revision total hip replacement may be technically challenging, with component selection being one of the challenges. Modular titanium femoral components have some advantages, and our aim was to assess the medium term outcome of the use of such a component [Revitan or PFM]. We reviewed 323 patients undergoing revision with one of these femoral stems. We applied the Oxford Hip Score, the Charnley Class, and the Devane Patient Activity Level to each patient. The average follow up time was 6.58 years. The mean Oxford score was 35.74.39.8% of the patients were Charnley Class B. 52.4% of patients had an activity score indicating a moderate level of activity ie they could participate in gardening, swimming and other leisure pursuits. The overall outcome was good with this prosthesis. The Oxford scores were comparable with the national mean for revision THR on the NZ National Joint Register

Introduction. Wear of the ultra high molecular weight polyethylene (UHMWPE) cup and the resulting loosening has been shown to limit the long-term results of the Charnley low-frictional torque arthroplasty (LFA). Factors affecting wear rates have been studied: level of patient activity, effective roughness of the stainless steel head, impingement and the possible variations in wear characteristics of UHMWPE. Since patients' activity level cannot be predicted or modified, alternative materials were examined. Methods and Results. The Charnley 22.225 mm diameter head of alumina ceramic in combination with chemically cross-linked polyethylene cup has now reached over 23 years of clinical and radiographic follow-up. Of the initial 17 patients (19 hips) in the study, 4 patients (4 hips) have died, 1 hip has been revised for deep infection and 3 patients (3 hips) are unable to attend follow-up due to medical problems unrelated to the hip. Nine patients (11 hips) are still attending follow-up at a mean of 22 years 5 months (21 year 3 months-23 years 6 months). The mean age at surgery in this group was 47 years (26-58) and the mean weight 81kgs (54-102). The mean penetration rate was 0.02mm/year and none have exceeded 0.41mm total penetration. Conclusion. Since the problem of cup wear and loosening is mechanical rather than biological the long-term solutions are more likely to come from materials rather than radical changes of design of methods of component fixation

Uncemented femoral components of hip arthroplasty are believed to have a higher risk of subsidence in older patient groups. This has not been conclusively related to a poorer outcome of the arthroplasty over time. Our aim is to measure prevalence of subsidence in uncemented femoral components in a population of patients over 75 years of age and correlate with clinical outcome measures. Patients over 75 years of age from Jan 2002 to Aug 2009 had uncemented THJR at the discretion of the senior surgeon (RF). Pre-operative Charnley Hip Classification and Harris Hip Scores were recorded, as were HHS at 6 weeks and 1 year post-operatively for all patients. Post-operative radiographs were retrospectively reviewed and presence of subsidence quantified at 1 year and subsequent follow-ups. 83 patients had 92 uncemented THJR in the designated time frame. 5 pts were lost to follow-up or died within 12 months after operation leaving 78 patients and 87 hips for assessment. Average pre-op HHS 40.6 (13.1–64.6) and Charnley Classification noted (A 55.4 %: B 30.4%: C 14.1%). 12/87 (13.8%) hips had subsidence > 2mm (2 – 18mm) noted at 1 year radiographs. Average HHS for those with >2mm subsidence was 89.4 (69.7–100; median 93.9) compared to 90.7 (64.7 – 100; median 91.9) for those with < 2mm subsidence. 4 patients underwent revision procedures during follow-up period, all for periprosthetic fracture following falls. In appropriately selected patients over 75 years of age, the presence of subsidence in uncemented femoral components does not seem to result in poorer outcome measures

The C-Stem in its design as a triple tapered stem, is the logical development of the original Charnley flat-back polished stem. The concept, design and the surgical technique cater for a limited slip of the stem within the cement mantle transferring the load more proximally. Five thousand two hundred and thirty three primary procedures using a C-stem have been carried out since 1993. We reviewed all 621 cases that had their total hip arthroplasty before 1998. Sixty nine patients (70 hips) had died and 101 hips had not reached a ten-year clinical and radiological follow-up and had not been revised. Thirty-two hips had been revised before 10 years, none were revised for aseptic stem loosening and no stems. The indications for revision were Infection in 4, dislocation in 3, aseptic cup loosening in 24 and unexplained pain in 1. The remaining 418 hips had a mean follow-up of 12 years (range 10–15 years). There were 216 women and 173 men, and 34 patients had bilateral LFAs. The patients' mean age at surgery was 53 years (range 16–83 years). Thirty four hips had been revised at the time of review. The reasons for revision were infection in 5, dislocation in 2, aseptic cup loosening in 24 and 1 for neuralgia paraesthetica where the stem was well fixed. Two hips were revised for stem fracture. There were no revisions for stem loosening but 2 stems were revised for fracture - both with a defective cement mantle proximally. The clinical results are very encouraging and they support the concept of the Charnley cemented low friction arthroplasty, but place a demand on the understanding of the technique and its execution at surgery

Objective:. Patient-specific or “custom” total knee replacements have been designed to fit the arthritic knee in primary total knee arthroplasty (TKA) better than “off-the-shelf” implants. Using computer technology, patient-specific cutting-blocks and custom-made implants are created to more accurately fit the contour of the knee and reproduce the anatomic J-curve with the hope of providing a better functional outcome. Purpose:. This retrospective, matched-pair study evaluates manipulation under anesthesia (MUA) rates in cemented patient-specific cruciate-retaining (PSCR) TKA compared to that in both cemented posterior-stabilized (PS) and non-cemented cruciate-retaining rotating-platform (NC CR RP) TKA. Materials and Methods:. From 2010 through November of 2012, 21 PSCR TKAs were performed in 19 patients. Using medical records from our patient database, these patients were matched for age, side, deformity, diagnosis, Charnley Class, and preoperative range of motion (ROM) with 42 PS TKAs performed during the same time period by the same surgeon using the same intra- and post-operative protocols. Additionally, 11 NC CR RP TKA were performed and evaluated based on the same criteria. Pre- and postoperative radiographs were performed using criteria as described by The Knee Society. Results:. Preoperatively the custom CR RP TKA cohort had a larger average ROM compared to the PS TKA cohort (P-value = 0.006). Postoperatively, however, the custom CR RP TKA cohort overall was found to have a significantly decreased average ROM compared to both the PS and NC CR RP TKA cohorts (2.0°–110.6° P-value = 0.0002 and 2.4°–117.3° P-value = 0.0003, respectively). 6 of the 21 (28.6%) PSCR TKAs performed underwent MUA to improve postoperative ROM. One manipulation was unsuccessful and the patient is scheduled for revision for arthrofibrosis. No patients in either the matched PS group or the CR RP group underwent postoperative MUA. Clinical and radiographic analysis including pre-operative ROM, deformity, side, Charnley Class, posterior tibial slope angle, epicondylar axis and posterior condylar offsets provided no insight into the reason for this higher MUA rate in the PSCR knees. Conclusion:. MUA rates in the patient-specific TKA group were significantly higher than that in the matched PS and NC CR RP groups. No correlations were found to clearly indicate the cause of the higher MUA rate among the PSCR knees. Early manipulation is recommended for stiffness with these custom devices. Level of Evidence: Level III, Retrospective comparative study. Keywords: Patient-specific total knee, Manipulation, TKA

In the 1960's Sir John Charnley introduced to clinical practice his low friction arthroplasty with a highly polished cemented femoral stem. The satisfactory long term results of this and other cemented stems support the use of polymethylmethacrylate (PMMA) for fixation. The constituents of PMMA remain virtually unchanged since the 1960s. However, in the last three decades, advances in the understanding of cement fixation, mixing techniques, application, pressurization, stem materials and design provided further improvements to the clinical results. The beneficial changes in cementing technique include femoral preparation to diminish interface bleeding, pulsatile lavage, reduced cement porosity by vacuum mixing, the use of a cement restrictor, pre-heating of the stem and polymer, retrograde canal filling and pressurization with a cement gun, stem centralization and stem geometries that increase the intramedullary pressure and penetration of PMMA into the cancellous structure of bone. Some other changes in cementing technique proved to be detrimental and were abandoned, such as the use of Boneloc cement that polymerised at a low temperature, and roughening and pre-coating of the stem surface. In the last two decades there has been a tendency towards an increased use of cementless femoral fixation for primary hip arthroplasty. The shift in the type of fixation followed the consistent, durable fixation obtained with uncemented acetabular cups, ease of implantation and the poor results of cemented femoral fixation of rough and pre-coated stems. Unlike cementless femoral fixation, modern cemented femoral fixation has numerous advantages: it is versatile, durable and can be used regardless of the diagnosis, proximal femoral geometry, natural neck version, and bone quality. It can be used in combination with antibiotics in patients with a history or predisposition for infection. Intra-operative femoral fractures are rare. However, the risk may be increased in collarless polished tapered stems. Post-operative thigh pain is extremely rare. Survivorship has not been surpassed by uncemented femoral fixation and it continues to be my preferred form of fixation. However, heavy, young, male patients may exhibit a slightly higher aseptic loosening rate

The extraordinary majesty of THR, as it burst onto the scene 60 years ago, both dazzled and blinded. It dazzled patients and surgeons alike and simultaneously obstructed a clear eyed assessment of the human costs. It behooves current practitioners, who have benefited mightily by our progress, to pause and reflect thoughtfully on that progress. Look no further than the fact that the treatment of a benign disease left one patient out of every 50 dead. Dead from a pulmonary embolus and that over 25% of the patients threw pulmonary emboli. What were the big six major disadvantages: 1) Fatal pulmonary emboli; 2) Prosthetic joint infection; 3) Failure of fixation; 4) Dislocation; 5) Periprosthetic osteolysis; 6) Prolonged hospitalization. Start with the observation that THR in the modern era began with Charnley's experiment with Teflon articulations. Of the nearly 300 such operations done, nearly 300 failed. Ultrahigh molecular weight polyethylene was better- much better. But still it produced wear and periprosthetic osteolysis, afflicting an estimated 1 million patients. Periprosthetic osteolysis became the most common reason for failure, the most common reason for reoperation, the most common reason for fracture, and the most common reason for extremely difficult re-operations requiring major grafting. Reoperation rates in certain series were 20 to 30% from loosening and 20 to 40% from osteolysis. Dislocation catapulted the unsuspecting patient to the floor at a rate of one out of 20 patients and the initial rate of prosthetic joint infection was 10%. Most patients were hospitalised in the new neighborhood of 2.5 weeks, at huge expense. Massive progress has been made but forget not that this striking progress was not obsessively linear. Recall the recent, extraordinary and continuing massive failure of metal-on-metal total hip replacements, despite 40 prior years of experience, predicting that metal-on-metal total joints should be ‘just fine’. Over the past six decades every one of the six major disadvantages listed above has been reduced by an order of magnitude. The challenge to you is to continue that progress

To report the clinical, functional and radiological outcome of consecutive primary hip arthroplasties using large diameter (36mm and above) ceramic bearing couples. We believe this to be one of the first independent series. We prospectively reviewed 519 consecutive primary THA using fully HAC coated acetabular shell and fully HAC coated stem (JRI Ltd) in 502 patients, with minimum follow-up of 32 months. A Biolox-Delta ceramic liner with an 18 deg taper and Biolox-Delta ceramic head (36mm and 40mm) were used in all cases, by 3 surgeons. None were lost to follow-up. Clinical outcome was measured using Harris, Charnley Oxford, EuroQol EQ-5D scores. Radiographs were systematically analysed for implant position, loosening, migration, osteolysis. Return to sports and hobbies were recorded. Mean age was 64.9 yrs (11–82yrs). There were no dislocations. 50–62mm acetabular shells were used. 36 mm head was used in 92% of cases. No acetabular revisions were performed for aseptic loosening. Other re-operations were for infection (1), peri-prosthetic fractures (1). The mean Harris and Oxford scores were 95 (88–97) and 14.1 (12–33) respectively. Harris and Oxford scores were 95 (88–97) and 14.1 (12–33) respectively. The Charnley score was 5.7 (5–6) for pain, 5.8 (4–6) for movement and 5.9 (4–6) for mobility. There was a significant improvement in the range of movement of the hip. There was no migration of acetabular component. Acetabular radiolucencies were present around one shell. No acetabular liner wear was demonstrated in CT Scans. Mean inclination was 7.4deg(37–65). Mean EQ-5D description scores and health thermometer scores were 0.84 (0.71–0.92) and 88 (66–96). With an end point of definite or probable loosening, the probability of survival was 100%. Overall survival with removal or repeat revision of either component for any reason as the end point was 99.1%. The results of this study show an excellent clinical and functional outcome and support the use of a fully coated prosthesis with ceramic bearing couples. We envisage monitoring and prospectively reporting the long-term outcome of this series of patients

Introduction. Total hip arthroplasty (THR) is one of the most successful procedures performed today. Uncemented acetabular components have by and large replaced cemented cups. As such, optimal fixation, bony ingrowth with longevity, and safety is highly demanded. In this study, we look at the safety and efficacy of the Stryker® Trident PSL™ acetabular component based on radiographic and clinical analysis. Materials and Methods. We looked at 860 consecutive patients between 2003 and 2007. Of these, 231 consecutive patients had a minimum 5 year follow up. All cases were for degenerative joint disease (DJD), except 2 for dysplasia, 1 for avascular necrosis (AVN), 1 femoral neck nonunion. Average Hospital for Special Surgery (HSS) hip scores at final follow up were recorded. Radiographic analysis included classification based on Delee and Charnley's zones 1–3. Osseointegration was assessed based on presence of SIRCAB (stress induced reactive cortical hypertrophy of bone), demarcation around the implant, stress shielding, presence of radial trabeculae, absence of radiolucency, type of bearing, presence of preoperative protrusion, violation of Kohler's line. EBRA software was used to assess acetabular inclination and version. Results. Of 231 hip replacements analyzed, 114 were male, 117 were female. The average age was 63 (range 33–87); height was 67.5 inches; BMI was 27; 3 patients had a preoperative diagnosis of DDH, 2 had AVN, 1 femoral neck nonunion, and 1 case of rheumatoid arthritis (RA), with the remainder of patients diagnosed with DJD. cup abduction angle was 41.7° with average of 17.4° of anteversion. Average HSS functional score was excellent at latest follow up was 34, with most patients not relying on any assistive devices; There were no revisions performed due to mechanical failures or due to failure to osseointegrate. Complications include 1 infection (0.43%); and 4 dislocations (1.73%). Osseointegration was measured by separating the acetabulum into DeLee and Charnley zones and assessed by analyzing:. a). stress induced hypertrophic reaction of cortical bone (SIHRCaB): zone 1 (75.8%), zone 2 (11.7%), zone 3 (51.9%). b). Radial trabeculae: zone 1 (94.8%), zone 2 (93.5%), zone 3 (92.6%). c). Absence of radiolucency: zone 1 (96.1%), zone 2 (97%), zone 3 (96.1%). No association of bearing surfaces to survivorship was noted as metal femoral heads were used in 72.7% of cases while a ceramic bearing was used in 25.1%. Conclusion. The Trident PSL acetabular component was examined in a large, consecutive series by a single surgeon with a minimum 5–9 year follow up. We have demonstrated excellent radiographic osseointegration at latest follow up with no mechanical failures, high survivorship, and excellent clinical outcome scores. It continues to be a reliable option for primary acetabular reconstruction

We aim to report the clinical and radiological outcome of consecutive primary hip arthroplasties using the JRI-Furlong HAC coated femoral and acetabular components. We reviewed 586 consecutive cementless primary THA in 542 patients with a minimum 12-18 year follow-up, performed at one institution between 1986 and 1994. Twenty-eight (32 THA) were lost to follow-up. Clinical outcome was measured using Harris, Charnley and Oxford scores. Quality of life using EuroQol. EQ-5D. Radiographs were systematically analysed. The mean age was 75.2 years. Dislocation occurred in 12 patients (three recurrent). Re operations were performed in 11 patients (1.9%). Four acetabular and one stem revisions were performed for aseptic loosening. Other re-operations were for infection (two), periprosthetic fractures (two), cup malposition (one), revision of worn liner (two). The mean Harris and Oxford scores were 89 (79–96) and 18.4 (12–32) respectively. The Charnley score was 5.7 for pain, 5.3 for movement and 5.4 for mobility. Acetabular radiolucencies were present in 54 hips (9.7%). The mean linear polythene wear was 0.06 mm/year. Stable stem by bony ingrowth was identified in all hips excluding one femoral revision case. Mean stem subsidence was 2.2mm (0.30–3.4mm). Radiolucencies were present around 37 (6.6%) stems. EQ- 5D description scores and health thermometer scores were 0.81 (0.71–0.89) and 86 (64–95). With an end point of definite or probable loosening, survival at 12 years was 96.1% for acetabular and 98.3% for femoral components. Overall survival at 12 years with removal or repeat revision of either component for any reason as the end point was 97.2%. The results of this study support the continued use of a fully coated prosthesis and documents the durability of the HAC coated components. In our clinical experience, the Furlong prosthesis revealed encouraging radiographic stability over a long-term period

Introduction. We aim to report the clinical and radiological outcome of consecutive primary hip arthroplasties using the JRI-Furlong HAC coated femoral and acetabular components. Methods. We reviewed 586 consecutive cementless primary THA in 542 patients, with a minimum 12-year follow-up to 18 years, performed at one institution between 1986 and 1994. Twenty eight (32 THA) were lost to follow-up. Clinical outcome was measured using Harris, Charnley and Oxford scores. Quality of life using EuroQol EQ-5D. Radiographs were systematically analysed. Results. The mean age was 75.2 yrs. Dislocation occurred in 12 patients (3 recurrent). Re-operations were performed in 11 patients (1.9%). Four acetabular and one stem revisions were performed for aseptic loosening. Other re-operations were for infection (2), periprosthetic fractures (2), cup malposition (1), revision of worn liner (2). The mean Harris and Oxford scores were 89 (79- 96) and 18.4 (12-32) respectively. The Charnley score was 5.7 for pain, 5.3 for movement and 5.4 for mobility. Acetabular radiolucencies were present in 54 hips (9.7%). The mean linear polythene wear was 0.06mm/year. Stable stem by bony ingrowth was identified in all hips excluding one femoral revision case. Mean stem subsidence was 2.2mm (0.30- 3.4mm). Radiolucencies were present around 37 (6.6%) stems. EQ-5D description scores and health thermometer scores were 0.81 (0.71-0.89) and 86 (64-95). With an end point of definite or probable loosening, survival at 12 years was 96.1% for acetabular and 98.3% for femoral components. Overall survival at 12 years with removal or repeat revision of either component for any reason as the end point was 97.2%. Conclusion. The results of this study support the continued use of a fully coated prosthesis and documents the durability of the HAC coated components. In our clinical experience, the Furlong prosthesis revealed encouraging radiographic stability over a long term period

We report the clinical and radiological outcome of consecutive primary hip arthroplasties using the JRI-Furlong Hydroxyapatite ceramic (HAC) coated acetabular components. We reviewed 412 consecutive cementless primary THA using fully coated acetabular shell in 392 patients—with a minimum 12 to 18 year follow-up—performed at two institutions between 1986 and 1994. Twenty (22 THA) were lost prior to 12-year follow-up, leaving 372 patients (390 THA) available for study. Fully HAC coated stems were used in all patients. The clinical outcome was measured using Harris, Charnley and Oxford hip scores and the quality of life using EuroQol EQ-5D. Radiographs were systematically analysed for implant position, loosening, migration, osteolysis. Polythene wear was digitally measured. The radiographic stability of the acetabular component was determined by Enghs criteria. The mean age was 74.4 years. The mean Harris and Oxford scores were 87 (78– 97) and 19.1 (12–33) respectively. The Charnley score was 5.6 (5-6) for pain, 5.2 (4–6) for movement and 5.3 (4–6) for mobility. Migration of acetabular component was seen in four hips. Acetabular radiolucencies were present in 54 hips (9.7%). The mean linear polythene wear was 0.06mm/year. Mean inclination was 48.4° (38–65). Radiolucencies were present around 37 (6.6%) stems. Dislocation occurred in 10 patients (three recurrent). Re-operations were performed in nine patients (1.9%). Four acetabular revisions were performed for aseptic loosening. Other re-operations were for infection (three), periprosthetic fractures (one), cup malposition (one) and revision of worn liner (three). Mean EQ-5D description scores and health thermometer scores were 0.81 (0.71–0.89) and 86 (64–95). With an end point of definite or probable loosening, the probability of survival at 12 years was 97.1% for acetabular component. Overall survival at 12 years with removal or repeat revision of either component for any reason as the end point was 96.2%. The results of this study support the continued use of a fully coated prosthesis and documents the durability of the HAC coated components. In our clinical experience, the Furlong prosthesis revealed encouraging radiographic stability over a long-term period

Dual mobility components for total hip arthroplasty provide for an additional articular surface, with the goals of improving range of motion, jump distance, and overall stability of the prosthetic hip joint. A large polyethylene head articulates with a polished metal acetabular component, and an additional smaller metal or ceramic head is snap-fit into the large polyethylene. In some European centers, these components are routinely used for primary total hip arthroplasty. However, their greatest utility will be to prevent and manage recurrent dislocation in the setting of revision total hip arthroplasty. Several retrospective series have shown satisfactory results for this indication at medium-term follow-up times. The author has used dual mobility components on two occasions to salvage a failed constrained liner. At least one center reports that dual mobility outperforms 40mm femoral heads in revision arthroplasty. Modular dual mobility components, with screw fixation, are the author's first choice for the treatment of recurrent dislocation, revision of failed metal-metal resurfacing, total hips, unipolar arthroplasties, and salvage of failed constrained liners. There are concerns of elevated metal levels with one design, and acute early intra-prosthetic dissociation following attempted closed reduction. Total hip surgeons no longer cement Charnley acetabular components, use conventional polyethylene, autologous blood donation, or a drain; now constrained components join these obsolete techniques! In 2017, a dual mobility component, rather than a constrained liner, is the preferred solution in revision surgery to prevent and manage recurrent dislocation