Introduction. Failed operated intertrochanteric fractures (with screw cutout, joint penetration, varus collapse, nonunion, or femoral head avascular necrosis) pose treatment dilemmas. The ideal approach is re-osteosynthesis with autologous bone grafting. When the femoral head is unsalvageable, conversion to a prosthetic hip replacement is necessary. Materials/Methods. Thirty-seven patients with failed dynamic hip screw fixation (and unsalvageable femoral heads) were treated with cementless hip arthroplasty (13 underwent Bipolar Arthroplasty, 24 had Total Hip Arthroplasty) over a 5-year period (Dec 2005 to Nov 2010). Seven needed a modified trochanteric split, and the rest were managed by standard anterolateral approach. Abductor mechanism was reconstructed using strong nonabsorbable sutures (ethibond 5) or stainless steel wires. The calcar was partially reconstructed using remnant femoral head and cerclage wiring in a few cases. Results. Clinico-radiological assessment was done at three, six, 12 months and yearly thereafter over an average 36 months (range, three to 60 months). Stem loosening, lysis, subsidence and trochanteric union were studied. At last follow-up, one patient had died, and there were two instances each of stem subsidence and trochanteric nonunion. Clinical results using Harris hip scores were good or excellent. Conclusion. Management of nonsalvageable femoral heads after failed intertrochanteric fracture fixation is possible with cementless hip arthroplasty. Successful outcomes depend on functional abductor reconstruction, fracture and femoral shaft penetration prevention. Autograft, allograft or head/neck replacement components are necessary sometimes

Background:. Historically, performing a successful hip joint replacement in patients aged fewer than 30 years has been an orthopedic challenge. The newer generation of prostheses and surgical techniques has the potential to increase the longevity of implants. The purpose of this study was to evaluate the outcomes of cementless hip arthroplasty in patients aged fewer than 30 years. Materials and Methods:. In this cross-sectional study, 41 patients (46 hips) were studied with a mean age of 24, 4 (from 17 to 30 years) of whom underwent cementless metal – polyethylene hip arthroplasty from 2004 to 2007. The Harris hip score (HHS) was used to assess the functional consequences. Patients were followed up in terms of early complications (thrombophlebitis of the lower limbs, dislocation, hematoma and infection) and late complications (aseptic loosening, dislocation, and reoperation) at weeks 3 and 6, at 3 and 6 months, one year after surgery and annually thereafter. Results:. Patients were followed for an average of 5 years and 2 months (from 51 to 82 months). One early complication (symptomatic thrombophlebitis) and one late dislocation (2.2%) were observed. There were no cases of aseptic loosening or osteolysis at the end of follow-up. The preoperative HHS was 59.6 (from 41 to 76), which rose to 82 and 83.5 after the one-year and final follow-up, respectively, which was a significantly increase. Conclusions:. Hip arthroplasty using a new generation of cementless proximal porous prosthesis with resistant polyethylene to cover the joint surfaces in patients aged fewer than 30 years is satisfactory and is accompanied by low complications. Keywords: Total hip replacement, hip arthroplasty, cementless Prosthesis, Hip osteoarthritis, osteonecrosis

Introduction

Conversion of immovable hip to a total hip arthroplasty provides a solution, improving function, reducing back and knee pain, and slowing degeneration of neighboring joints associated with hip dysfunction while the mobilization by total hip arthroplasty is rather uncommon and challenging surgery.

Introduction

During broach preparation and implant insertion of the proximal femur the surgeon may be able to use audible pitch changes to judge broaching adequacy and implant position. The aim of this study was to analyse the sound produced and explain the sound spectra using acoustic physics.

Introduction:. Significant proximal femoral remodeling occurs after total hip arthroplasty (THA), with regions of bone loss, and regions of hypertrophy. This study compared three implants for changes in femoral bone mineral density over 2 years following primary uncemented hip arthroplasty with a conventional stem (THA), a novel femoral neck-sparing short hip stem (NS-THA), and resurfacing hip arthroplasty (RHA). Methods:. Seventy-one patients participated in this non-randomized, prospective study. All patients had a diagnosis of osteoarthritis and underwent primary uncemented hip arthroplasty. Dual Energy XRay Absorptomitry (DXA) scans were performed at preoperative, 3–7 days post-op, 6 weeks, 6 months, one, and two years post-op. Using custom 2 cm zones, 19 zones were observed for percent changes in bone mineral density (BMD). Radiographs and Harris Hip scores were obtained at each visit. Results:. Age, gender, and BMI were found to be statistically different with fewer females and lower age in the RHA group, and a lower age in the NS-THA group. In all three groups, regions that were located proximally were shown to be the most susceptible to bone loss. Combined 2 cm zones 1C/7C, 2A/6A, and 2B/6B showed statistical significance (p < 0.05). Bone loss in the proximal regions was 8–10% lower with the femoral neck-sparing short stem, and least in the RHA group, causing little to no BMD loss in proximal regions. Radiographic outcomes and clinical results including Harris Hip scores were equal between the groups. Conclusion:. Consistent with our hypothesis, it was found that hip arthroplasty with a conventional stem resulted in the highest proximal femoral bone loss, and resurfacing arthroplasty was associated with the least bone loss. The femoral neck-sparing short stem ameliorated the bone loss seen with traditional hip arthroplasty, and approximated the bone preservation seen with hip resurfacing. The short stem neck-sparing device may provide some of the benefits of hip resurfacing, but could potentially have wider indications for use

The objective of this study was to evaluate the short term clinical and radiological results of a new short stem hip implant. In 29 consecutive patients suffering from osteoarthritis with 33 affected hip joints, the clinical and radiological results of 33 cementless hip arthroplasties using a cementless implanted short stem prosthesis type Aida and a cementless cup type Ecofit were evaluated prospectively between October 2009 and June 2015 in two hospitals. The median age of patients at time of surgery was 55 years (range, 30–71 years), 23 male and 10 female patients were included in the study. The median clinical follow up was 24 months (range, 1.5–51 months), and the median radiological follow up was 12 months (range, 1–51 months). Two patients were lost to follow up and two patients had only one immediate postoperative x- ray. The Harris Hip Score improved from a median preoperative value of 53 to a median postoperative value of 93 at follow up. Radiological analysis showed that 19 stems (58%) showed stable bony ingrowth, five cases (15%) showed stable fibrous ingrowth. Four cases need further follow up for proper evaluation of stem fixation. The short term survival of this new short stem is very promising, and achieving the goals of standard hip arthroplasty

Ceramic-on-ceramic bearings provide a solution to the osteolysis seen with traditional metal-on-polyethylene bearings. Sporadic reports of ceramic breakage and squeaking concern some surgeons and this bearing combination can show in vivo signs of edge loading wear which was not predicted from in vitro studies. Taper damage or debris in the taper between the ceramic and metal may lead to breakage of either a ceramic head or insert. Fastidious surgical technique may help to minimise the risk of ceramic breakage. Squeaking is usually a benign complication, most frequently occurring when the hip is fully flexed. Rarely, it can occur with each step of walking when it can be sufficiently troublesome to require revision surgery. The etiology of squeaking is multifactorial in origin. Taller, heavier and younger patients with higher activity levels are more prone to hips that squeak. Cup version and inclination are also relevant factors. Osteolysis following metal-on-UHMW polyethylene Total Hip Arthroplasty (THA) is well reported. Earlier generation ceramic-on-ceramic bearings did produce some osteolysis, but in flawed implants. As third and now fourth generation ceramic THAs come into mid- and long-term service, the orthopaedic community has begun to see reports of high survival rates and very low incidence of osteolysis in these bearings. The technique used by radiologists for identifying the nature of lesions on Computed Tomography (CT) scan is the Hounsfield score which will identify the density of the tissue within the lucent area. Commonly the radiologist will have no access to previous imaging, especially pre-operative imaging if a long time has elapsed. With such a low incidence of osteolysis in this patient group, what, then, should a surgeon do on receiving a CT report on a ceramic-on-ceramic THA, which states there is osteolysis? This retrospective review aims to determine the accuracy of CT in identifying true osteolysis in a cohort of long-term third generation ceramic-on-ceramic uncemented hip arthroplasties in our department. Pelvic CT scans were performed on the first 27 patients from a cohort of 301 patients undergoing 15-year review with third generation alumina-alumina cementless THAs. The average follow-up was 15 years (15–17). The CT scans were reviewed against pre-operative and post-operative radiographs and reviewed by a second musculoskeletal specialist radiologist. Eleven of the CT scans were reported to show acetabular osteolysis, two reported osteolysis or a possible pre-existing cyst and one reported a definitive pre-existing cyst. After review of previous imaging including pre-operative radiographs, eleven of the thirteen patients initially reported to have osteolysis were found to have pre-existing cysts or geodes in the same size and position as the reported osteolysis, and a further patient had spot-welds with stress-shielding. One patient with evidence of true osteolysis awaits aspiration or biopsy to determine if he has evidence of ceramic wear or metallosis. Reports of osteolysis on CT should be interpreted with care in modern ceramic-on-ceramic THA to prevent unnecessary revision. Further imaging and investigations may be necessary to exclude other conditions such as geodes, or stress shielding which are frequently confused with osteolysis on CT scans

40 patients affected by primary and secondary acetabular bone stock defect that were operated using cemented and cementless hip replacement. Bone defect was classified according to American Academy of orthopaedic surgery, different types of bone graft techniques and metal reinforcement were used. Geometrical position of the acetabular component, cup integration, hip center and graft interposition were assessed, 95% of the cups were in the desired position with graft incorporation and remodeled with one case of partial sciatic affection, most of reconstructions in primary hips were done with cementless cups but most of reconstructions in defects following loosening were treated by cemented cups. The results depend on the stability of the graft, cementing technique as well as cup position

Ceramic-on-ceramic bearings provide a solution to the osteolysis seen with traditional metal-on-polyethylene bearings. Sporadic reports of ceramic breakage and squeaking concern some surgeons and this bearing combination can show in vivo signs of edge loading wear which was not predicted from in vitro studies. Taper damage or debris in the taper between the ceramic and metal may lead to breakage of either a ceramic head or insert. Fastidious surgical technique may help to minimise the risk of ceramic breakage. Squeaking is usually a benign complication, most frequently occurring when the hip is fully flexed. Rarely, it can occur with each step of walking when it can be sufficiently troublesome to require revision surgery. The etiology of squeaking is multifactorial origin. Taller, heavier and younger patients with higher activity levels are more prone to hips that squeak. Cup version and inclination are also relevant factors. Fifty-five ceramic bearings revised at our center were collected over 12 years. Median time to revision was 2.7 years. Forty-six (84%) cases had edge loading wear. The median femoral head wear volume overall was 0.2mm. 3. /yr, for anterosuperior edge loading was 2.0mm. 3. /yr, and the median volumetric wear rate for posterior edge loading was 0.15mm. 3. /yr (p=0.005). Osteolysis following metal-on-polyethylene total hip arthroplasty (THA) is well reported. Earlier generation ceramic-on-ceramic bearings did produce some osteolysis, but in flawed implants. As 3rd and now 4th generation ceramic THAs come into mid- and long-term service, the orthopaedic community has begun to see reports of high survival rates and very low incidence of osteolysis in these bearings. The technique used by radiologists for identifying the nature of lesions on Computed Tomography (CT) scan is the Hounsfield score which will identify the density of the tissue within the lucent area. Commonly the radiologist will have no access to previous imaging, especially pre-operative imaging if a long time has elapsed. With such a low incidence of osteolysis in this patient group, what, then, should a surgeon do on receiving a CT report on a ceramic-on-ceramic THA, which states there is osteolysis? This retrospective review aims to determine the accuracy of CT in identifying true osteolysis in a cohort of long-term 3rd generation ceramic-on-ceramic uncemented hip arthroplasties in our department. Methods. Pelvic CT scans were performed on the first 27 patients from a cohort of 301 patients undergoing 15-year review with 3rd generation alumina-alumina cementless THAs. The average follow-up was 15 years (15–17). The CT scans were reviewed against pre-operative and post-operative radiographs and reviewed by a second musculoskeletal specialist radiologist. Results. Eleven of the CT scans were reported to show acetabular osteolysis, two reported osteolysis or possible pre-existing cyst and one reported a definitive pre-existing cyst. After review of previous imaging including pre-operative radiographs, eleven of the thirteen patients initially reported to have osteolysis were found to have pre-existing cysts or geodes in the same size and position as the reported osteolysis, and a further patient had spot-welds with stress-shielding. One patient with evidence of true osteolysis awaits aspiration or biopsy to determine if he has evidence of ceramic wear or metallosis. Conclusions. Reports of osteolysis on CT should be interpreted with care in modern ceramic-on-ceramic THA to prevent unnecessary revision. Further imaging and investigations may be necessary to exclude other conditions such as geodes, or stress shielding which are frequently confused with osteolysis on CT scans

Introduction:. Conventional radiographic images are the gold standard method for postoperative evaluation of uncemented cups in patients with total hip arthroplasty. A conventional radiographic image of the pelvis gives a radiation dose of 0.7 mSv. Normally two images are needed. At present, dual energy CT is becoming more accessible in clinical practice and could allow lower radiation dose. Aim:. We wanted to assess what radiation dose was possible without sacrificing image resolution. Materials and methods:. We used a pig cadaver to assess a wide variety of radiation doses. A 13 mm “osteolysis” was drilled into the acetabulum dorsally-apically of the cup. A two mm wear was made on the apical part of the liner. There were bilateral uncemented hip replacements inserted into the pelvis to imitate a case with metal artefacts. Radiation doses for human adults were estimated from scans of Kyoto Kagaku PBU-60 with extra attenuation (prosthesis) with parameters from the cadaver. We used dual energy CT with 50% reduction of radiation dose. The images were enhanced using a software package called SAFIRE (Siemens). Similar softwares are available on all CT machines. Results:. The image quality was surprisingly good. Both wear and osteolysis were easy to detect without much disturbing metal artefact. Conclusion:. Dual energy computed tomography can produce high resulotion images with a radiation dose equivalent to two conventional radiographs of the pelvis

Introduction. Osteloysis following metal-on-UHMW polyethylene Total Hip Arthroplasty (THA) is well reported, as is lack of osteolysis following Ceramic-on-Ceramic (CoC)THA. Early ceramic failures did report some osteolysis, but in flawed implants. As 3rd and now 4th generation ceramic THAs come into mid- and long-term use, the orthopaedic community has begun to see reports of high survival rates and very low incidence of osteolysis in these bearings. Osteolysis reported after 3rd generation CoC THA often included metallosis due to neck rim impingement. In our department we have revised only 2 hips in over 6000 CoC THAs for osteolysis. Both had evidence of metallosis as well as ceramic wear. The technique used by Radiologists for identifying the nature of lesions on CT is the Hounsfield score which will identify the density of the tissue within the lucent area. It is common for radiologist to have no access to previous imaging, especially pre-operative imaging if a long time has elapsed. With such a low incidence of osteolysis in this patient group, what, then, should a surgeon do on receiving a CT report on a ceramic-on-ceramic THA which states there is osteolysis? Revision of such implants in elderly patients has a high risk of morbidity and mortality. Objectives. This retrospective review aims to determine the accuracy of CT in identifying true osteolysis in a cohort of long-term third generation ceramic-on-ceramic uncemented hip arthroplasties in our department. Methods. Pelvic CT scans were performed on the first 27 patients from a cohort of 301 patients undergoing 15 year review with 3rd generation alumina-alumina cementless THAs. The average follow-up was 15 years (15–17). The CT scans were reviewed against pre-operative and post-operative radiographs and reviewed by a second musculoskeletal specialist radiologist. Results. Eleven of the CTscans were reported to show acetabular osteolysis, two reported osteolysis or possible pre-existing cyst and one reported a definitive pre-existing cyst. After review of previous imaging including pre-operative radiographs, eleven of the thirteen patients initially reported to have osteolysis were found to have pre-existing cysts or geodes in the same size and position as the reported osteolysis, and a further patient had spot-welds with stress-shielding. One patient with evidence of true osteolysis awaits aspiration or biopsy to determine if he has evidence of ceramic wear or metallosis. Conclusions. Reports of osteolysis on CT should be interpreted with care in modern ceramic-on-ceramic THA to prevent unnecessary revision. Further imaging and investigations may be necessary to exclude other conditions such as geodes, or stress shielding which are frequently confused with osteolysis on CT scans

Introduction. The purpose of this study was to evaluate the functional outcome in the medium and long-term of hip resurfacing in comparison with cementless hip replacement in patients under the age of 55. Methods. Eighty patients were enrolled between 1999 and 2002. Twenty-four were randomised (11 hip re-surfacing, 13 total hip replacement), 18 refused hip resurfacing and chose cementless total hip replacement with a 32 mm bearing, 38 insisted on re-surfacing. All the patients have been reviewed at a minimum follow-up of 8 years and a mean of 10.1 years. Patients were assessed clinically and radiographically at one year, five years, eight years and ten years. Outcome measures included EQ 5, SF 36, Oxford, Harris hip, UCLA and UCH scores. Results. No difference was seen in the Oxford, Harris hip score or in the quality of life scores between the two groups. The UCH functional hip score, however, showed significantly higher function scores in hip resurfacing patients compared with hip replacement patients; this was maintained at one year, five years and eight to ten years. All the patients showed a decline in high level activities and UCLA score over the period of the study. In spite of a similar aspiration to activity pre-operatively, a higher proportion of hip resurfacing patients were running and involved in sport and heavy manual work after five years. In this cohort there have been no failures in metal to metal articulation and there has only been one dislocation in the total hip group. Discussion. Activity measures in this small cohort suggest an advantage in hip resurfacing over hip replacement. In this patient group we have not seen the dramatic problems reported elsewhere with hip resurfacing

Introduction. Proper femoral reaming is a key factor for a successful outcome in cementless hip arthroplasty. Good quality reaming minimizes risks of intra-operative femoral fracture during reaming and prevents poor fitting of the implant which can lead to subsidance of the stem postoperativly. Determining the quality of reaming is largely a subjective skill and dependant on the surgeon's experience with no documented intraoprative method to assess it objectively. Method. We recorded and analysed the frequencies of sound signals recorded via a bone conduction microphone during reaming of the femoral canal in a series of 28 consecutive patients undergoing uncemented total hip replacement performed by same surgeon. Hammaring sound frequencies and intensity were analysed by mean of computer software. The relationship between the patterns of the recorded reaming sound frequencies compared with surgeon judgment of the reaming quality intraoparativly and post operative x rays. All patients were followed up clinically and radiologically for 2 years after surgery to determine the integrity of the fix and to evaluate the stability of the prosthesis. Results. There was a consistent pattern of frequency changes detected in all cases regardless of gender, age, bone density size of reamer etc. Our results showed that the resonances in the femur can be accurately recorded during canal reaming and proved that there is a definite increase in the amplitude of sound frequencies between 600 and 1000 Hz when the tension of the reamer moves from loose to tight during hammering. Adding all of the dB values between 600 to 1000 Hz for the loose tension sound and comparing this to the total for the tight tension sound showed an average of 449.6% increase. Our Analysis of the sound signals changes was comparable to the adequacy of the reaming postoperatively. Conclusion. There are identifiable audio frequency patterns changes associated with satisfactory reaming of the femoral canal. Our findings may pave the way for the development of a real-time intraoperative reaming audio analyser which can guide the surgeon to the optimal reaming tension

Based on numerous national registries, cemented hip replacements have globally better long-term results than uncemented hip replacements. For example, following data have been published in national registries:. These registries demonstrated clearly that cemented fixation should be definitively preferred than uncemented fixation… Despite this evidence, uncemented fixation is more and more used in the majority of the countries performing total hip replacements. A recent paper analysed the Swedish situation and may give some reasons for explaining this paradox. A Cox proportional hazards model was used to analyze the Relative Risk (RR) of revision for different type of implants and/or fixation for 170,413 total hip arthroplasties. The RR was adjusted for sex, age, and underlying diagnosis. If the RR is lower than 1, less revisions are seen with uncemented fixation and less revisions are seen with cemented fixation when the RR is higher than 1. The figure 1 summarizes the table 6 of this publication. This figure naturally confirms that globally cemented fixation has a lower revision burden with an adjusted RR of 1.5 (revision of any component for aseptic loosening) than uncemented fixation. This difference in the revision is controlled by the cups, where the adjusted RR for uncemented cups is 1.8. Stems demonstrate an opposite behaviour with a lower revision burden for uncemented fixation with an adjusted RR of 0.4. Analysing the revision rate of the 5 most common implants (cemented versus uncemented), the adjusted RR for aseptic loosening is lower than 1 for both cups and stems. The difference of the RR between all cups (RR: 1.8) and the 5 most common cups (RR: 0.5) indicates undeniably that some cup have a major influence on the revision rate of uncemented systems. This analysis allows to draw following conclusions:. •. In national registries, cemented fixation is globally superior. •. The lower clinical results of uncemented fixation seem to be controlled by badly designed uncemented implants. •. Modern uncemented implants have as least equivalent results than cemented implants. •. Based on these results, uncemented fixation will be the key fixation for this century