Low-energy fractures of the proximal humerus indicate osteoporosis and it is important to direct treatment to this group of patients who are at high risk of further fracture. Data were prospectively collected from 79 patients (11 men, 68 women) with a mean age of 69 years (55 to 86) with fractures of the proximal humerus in order to determine if current guidelines on the measurement of the bone mineral density at the hip and lumbar spine were adequate to stratify the risk and to guide the treatment of osteoporosis. Bone mineral density measurements were made by dual-energy x-ray absorptiometry at the proximal femur, lumbar spine (L2-4) and contralateral distal radius, and the T-scores were generated for comparison. Data were also collected on the use of steroids, smoking, the use of alcohol, hand dominance and comorbidity. The mean T-score for the distal radius was −2.97 (. sd. 1.56) compared with −1.61 (. sd. 1.62) for the lumbar spine and −1.78 (. sd. 1.33) for the femur. There was a significant difference between the mean lumbar and radial T scores (1.36 (1.03 to 1.68); p < 0.001) and between the mean femoral and radial T-scores (1.18 (0.92 to 1.44); p < 0.001). The inclusion of all three sites in the determination of the T-score increased the sensitivity to 66% compared with that of 46% when only the proximal femur and lumbar spine were used. This difference between measurements in the upper limb compared with the axial skeleton and lower limb suggests that basing risk assessment and treatment on only the bone mineral density taken at the hip or lumbar spine may misrepresent the extent of osteoporosis in the upper limb and the subsequent risk of fracture at this site. The assessment of osteoporosis must include measurement of the bone mineral density at the distal radius to avoid underestimation of osteoporosis in the upper limb

Fractures of the distal forearm are widely regarded as the result of “fragility”. We have examined the extent to which patients with Colles’ fractures have osteopenia. We measured the bone mineral density (BMD) in the contralateral radius of 235 women presenting with Colles’ fractures over a period of two years. While women of all ages had low values for ultra-distal BMD, the values, in age-matched terms, were particularly low among premenopausal women aged less than 45 years. This result was not due to the presence of women with an early menopause. This large survey confirms and extends the findings from earlier small studies. We consider that it is particularly important to investigate young patients with fractures of the distal forearm to identify those with osteoporosis, to seek an underlying cause and to consider treatment

A total of 63 women who had an operation for a fracture of the hip was randomly allocated to one year of treatment either with anabolic steroids, vitamin D and calcium (anabolic group) or with calcium only (control group). The thigh muscle volume was measured by quantitative CT. The bone mineral density of the hip, femur and tibia was assessed by quantitative CT and dual-energy x-ray absorptiometry and of the heel by quantitative ultrasound. Quantitative CT showed that the anabolic group did not lose muscle volume during the first 12 months whereas the control group did (p< 0.01). There was less bone loss in the proximal tibia in the anabolic group than in the control group. The speed of gait and the Harris hip score were significantly better in the anabolic group after six and 12 months. Anabolic steroids, even in this moderate dose, given in combination with vitamin D and calcium had a beneficial effect on muscle volume, bone mineral density and clinical function in this group of elderly women

Objective. To compare regional body composition, bone mineral density (BMD), and clinical outcome in patients with two different shoulder arthroplasty designs. Materials and Methods. This cross-sectional study included 54 patients with a total of 63 shoulder arthroplasties. There were 18 men and 45 women with a mean age of 68.9 years SD ± 10.5. Mean follow-up time was 39.2 months SD ± 14.4. The patients were divided into three groups according to their history: 22 patients were diagnosed with a proximal humeral fracture and treated with a stemmed hemi arthroplasty, 11 patients were diagnosed with osteoarthritis and treated with a stemmed hemi arthroplasty, and 30 patients were diagnosed with osteoarthritis and treated with a resurfacing arthroplasty. All patients underwent a one-day protocol: Regional Dual X-ray Absorptiometri (DXA) was used to measure BMD of the distal third of humerus and regional body composition of the upper arm. The clinical outcome was measured using Western Ontario Osteoarthritis of the Shoulder index (WOOS) and Constant-Murley score. Results. All three groups were comparable regarding demographic data. Mean BMD of the distal third of humerus was 1.029 g/cm2 SD ± 0.204, mean tissue mass of the upper arm was 2.6 kg SD ± 0.7 and mean muscle mass was 1.4 kg SD ± 0.6. BMD of the distal third of humerus, tissue mass and muscle mass were significantly higher in the group diagnosed with osteoarthritis and treated with a resurfacing arthroplasty compared to the group diagnosed with a proximal humeral fracture and treated with a stemmed hemi arthroplasty, P = 0.03, P = 0.01 and P = 0.02 respectively. Median Constant score was 45.0, range 6–89, median WOOS 633, range 28–1824, and median strength 7.0 units, range 0–25. There were no significant differences between the three groups. Nevertheless, there was a trend towards a higher Constant-Murley score and muscle strength in the group of patients diagnosed with osteoarthritis and treated with a resurfacing arthroplasty compared to the group of patients diagnosed with a proximal humeral fracture and treated with a stemmed hemi arthroplasty. Conclusion. After shoulder arthroplasty BMD of the distal third of humerus and body composition are apparently more dependent on diagnosis rather than arthroplasty design. However, a larger number of patients diagnosed with osteoarthritis and treated with a stemmed hemi arthroplasty are needed to support this

Introduction. Several short femoral stems have been introduced in primary total hip arthroplasty, supposedly in order to save proximal bone stock. We intended to analyse primary stability, changes in periprosthetic bone mineral density (BMD), and clinical outcome after insertion of the uncemented collum femoris preserving (CFP)-femoral device. Methods. A prospective cohort study on 30 patients scheduled for receiving the CFP-stem combined with an uncemented cup was carried out. Stem migration was analysed by radiostereometry (RSA). Preoperative total hip BMD and postoperative periprosthetic BMD in Gruen zones 1–7 was investigated by DXA, and the Harris hips score (HHS) was determined. The patients were followed up to 12 months. Results. 2 patients were intraoperatively excluded because their proximal femur was found to be unsuitable for insertion of the studied implant, 1 patient was later revised due to a deep infection. This left 27 patients for final analysis. RSA showed that only very little migration of the implant occurred, with the largest amplitude found in rotation around the y-axis (1.8°, SD 0.6, after 12 mths), representing minimal stem retroversion. DXA after 12 mths demonstrated substantial BMD loss in Gruen zones 7 (−30.8%), 6 (−19.1%) and 2 (−13.3%, p-values for all described changes <0.001 when comparing with baseline BMD determined immediately postoperatively). There was a moderate correlation of low preoperative total hip BMD with a higher amount of bone loss in Gruen zones 2 (Pearson correlation coefficient r = 0.6, p = 0.001), 6 (r = 0.5, p = 0.005) and 7 (r = 0.6, p = 0.003). In contrast, we found no correlation of periprosthetic bone loss in any of the Gruen zones 1–7 with logarithmically transformed maximal total point translation (MTPT) of the stem (p > 0.05 for all regions), neither after 3 nor after 12 mths. The mean HHS increased from 49 (SD 15) preoperatively to 99 (SD 2) after 12 mths. Interpretation. Based on these short-term data, we conclude that i) the studied implant seems to be stable within the first year, ii) substantial loss in periprosthetic BMD - with a predominance in the calcar region - occurs, iii) low preoperative total hip BMD predisposes towards greater loss of periprosthetic BMD after 12 months, iv) postoperative loss in periprosthetic BMD does not correlate with increased stem migration. Clinical results are excellent so far. Continuing follow-up will reveal whether this novel stem remains stable in the medium and long term, and whether the loss in BMD in the regions mentioned above can be recovered with time or whether it continues

Background

Though less common than in females, osteoporosis and osteoporosis-related fractures are not uncommon in males. Our primary objectives were (1) to compare the rates of osteoporosis and osteopenia in adult Brazilian males versus females, 55 years old and over and presenting for bone mineral densitometry (BMD); and (2) to compare males and females as to past osteoporosis screening and management.

It is becoming increasingly common for a patient to have ipsilateral hip and knee replacements. The inter-prosthetic (IP) distance, the distance between the tips of hip and knee prostheses, has been thought to be associated with an increased risk of IP fracture. Small gap distances are generally assumed to act as stress risers, although there is no real biomechanical evidence to support this. The purpose of this study was to evaluate the influence of IP distance, cortical thickness and bone mineral density on the likelihood of an IP femoral fracture. A total of 18 human femur specimens were randomised into three groups by bone density and cortical thickness. For each group, a defined IP distance of 35 mm, 80 mm or 160 mm was created by choosing the appropriate lengths of component. The maximum fracture strength was determined using a four-point bending test. The fracture force of all three groups was similar (p = 0.498). There was a highly significant correlation between the cortical area and the fracture strength (r = 0.804, p <  0.001), whereas bone density showed no influence. This study suggests that the IP distance has little influence on fracture strength in IP femoral fractures: the thickness of the cortex seems to be the decisive factor. Cite this article: Bone Joint J 2014;96-B:1378–84

We evaluated the effect of low-intensity pulsed ultrasound stimulation (LIPUS) on the remodelling of callus in a rabbit gap-healing model by bone morphometric analyses using three-dimensional quantitative micro-CT. A tibial osteotomy with a 2 mm gap was immobilised by rigid external fixation and LIPUS was applied using active translucent devices. A control group had sham inactive transducers applied. A region of interest of micro-CT was set at the centre of the osteotomy gap with a width of 1 mm. The morphometric parameters used for evaluation were the volume of mineralised callus (BV) and the volumetric bone mineral density of mineralised tissue (mBMD). The whole region of interest was measured and subdivided into three zones as follows: the periosteal callus zone (external), the medullary callus zone (endosteal) and the cortical gap zone (intercortical). The BV and mBMD were measured for each zone. In the endosteal area, there was a significant increase in the density of newly formed callus which was subsequently diminished by bone resorption that overwhelmed bone formation in this area as the intramedullary canal was restored. In the intercortical area, LIPUS was considered to enhance bone formation throughout the period of observation. These findings indicate that LIPUS could shorten the time required for remodelling and enhance the mineralisation of callus

Since osteoimmunology is gaining increasingly interest and evidence for involvement of complement in bone biology was found, the role of complement in bone biology and fracture healing was evaluated. After characterizing the bone phenotype, a fracture healing experiment with C3- and C5- deficient mice was performed. After osteotomy of the right femur and external fixation, healing was analyzed after 1, 3, 7 and 21 days. Bone characterization revealed a reduced number of osteoclasts in C5-deficient animals with a significantly reduced resorption activity. While bone mineral density was significantly higher in complement-deficient strains, stiffness was significantly reduced. After 21 days of fracture healing, C5-deficient animals showed reduced stiffness and a smaller callus volume compared to controls. Interestingly, C3- more than C5-deficient animals showed reduced bone formation. Altogether, bone phenotype of complement-deficient animals resembles a mild form of osteopetrosis. This might be due to the resorption defect seen in C5-deficient mice. A reason for the minor involvement of C3-deficient mice compared to the C5-deficient animals could be the cross-talk between the coagulation cascade with side activation of complement factor C5 by thrombin. These results indicate for the first time an essential role of complement in bone biology and fracture healing. Future studies should focus on the molecular basis of complement involvement and the osteoclastic resorption defect

Introduction. Low total Mini-Mental State Examination (MMSE) score might significantly increase risk of hip fractures. This study was to investigate the effects of MMSE subdomains on the risk of hip fractures with a sex and age matched case control study. Materials & Methods. A total of 217 patients with first low-trauma hip fractures were matched with 215 hospitalised controls. Seven MMSE subdomains were analysed using conditional logistic regression with adjustment of five important clinical confounders: education level, ADL, physical activities, body mass index and bone mineral density. ROC curve analyses were further used to investigate the predictability of the independent subdomains. Results. In univariate analyses, low score of all MMSE subdomains significantly increased the risk of hip fracture. However, only time orientation and visual construction domain remained significant in multivariate analyses. In the ROC curve analyses, the AUC of these two independent subdomains along with five clinical confounders was significantly larger (p=0.008) than that of clinical confounders alone. The AUC of summed scores of these two subdomains were significantly higher than that of total MMSE score (p=0.009). Conclusions. Time orientation and visual construction subdomains were significant independent risk factors for hip fractures and could be effectively used to screen the patients with high fracture risk in the hospital. Preventive intervention can be given to these patients

Introduction. The risk factors for new adjacent vertebral compression fracture (NAVCF) after Vertebroplasty (VP) or Kyphoplasty (KP) for osteoporotic vertebral compression fractures (VCFs) were investigated. Materials and methods. The authors retrospectively analyzed the incidence of NAVCFs in 135 patients treated with VP or KP for osteoporotic VCFs. Study period was from 2004 to 2008 with minimum follow-up of 2 years. Possible risk factors were documented: age, gender, body mass index, bone mineral density (BMD), co-morbidities, location of treated vertebra, treatment modality and amount of bone cement injected. Anterior-posterior vertebral body height ratio, intra-discal cement leakage into the disc space and pattern of cement distribution of the initial VCF and adjacent vertebral bodies were assessed on lateral thoracolumbar radiographs by 2 independent assessors. Results. 21 patients (15.6%) had subsequent symptomatic NAVCFs with a median time to new fracture was of 125 days. There was no difference in incidence of NAVCF between VP and KP groups (P>0.05). Significant differences were found between patients with and without NAVCF in terms of age, BMD, and the proportion of cement leakage into the disc space (P < 0.05). Greater age, intra-discal cement leakage and low BMD were found in patients with NAVCF. Conclusion. The most important risk factors affecting NAVCFs were age, osteoporosis and intra-discal cement leakage

The relationship between advancing patient age, decreasing bone mineral density and increasing distal radial fracture incidence is well established. Biomechanical and clinical work has shown that the radiographic severity of distal radial fractures is greater in patients with poor bone quality. Between 1991 and 2007, the number of elderly Scots (aged 75 years or more) increased by 18%, and population projections predict a further 82% increase by 2035. This study was conducted to investigate the effect of recent changes in the demographics of our population on the pattern and radiographic severity of distal radial fractures encountered at our institution. The epidemiology of two distinct series of patients (1991–93; 2007–08) suffering distal radial fractures was compared. The patient and radiographic fracture characteristics known to be predictive of fracture instability and severity were compared using the MacKenney formulae, and a subgroup analysis of distal radial fragility fractures was performed. The life expectancy of our catchment population has improved since 1991, and we have encountered a larger number of distal radial fractures occurring in older, more active and functionally independent patients. We identified an increase in the proportion of AO type B fractures, particularly in the oldest patient groups. The radiographic severity of distal radial fractures, especially low energy metaphyseal injuries, has increased. If the current trend in population demographics continues, it seems likely that orthopaedic surgeons will encounter an increasing number of severe distal radial fractures deemed unsuitable for treatment by closed methods

Background. The treatment of femoral neck fracture with internal fixation (IF) is recommended in younger patients and has compared to arthroplasty the advantage of retaining the femoral head. A big problem with osteosynthesis is though failure. Finding predictors for fixation failure is still an ongoing process and osteoporosis has been suggested as a predictor. Aim. To correlate bone mineral density (BMD) in regard to failure of IF in osteosynthesized femoral neck fractures. Material and method. In a health technology assessment study from 2005–2006 at Odense University Hospital, Department of Orthopaedic Surgery and Traumatology, 175 patients with femoral neck fractures accepted DEXA - scanning of the hip and lumbar spine assessing BMD. Final follow-up were 01.08.2010 and 141 patients with IF comprised the final cohort. The cohort consisted of 105 females and 36 males with a mean (CI) age of 77,2 (75,4–79,0). Failure is defined as revision surgery or new fracture. Results. 69 patients had a t-score (total hip) below −2,5 SD as defined for osteoporosis. At 1 year the overall (dislocated) failure rate was 34,5 % (44,7 %), at 2 years 45,4 % (60,0 %) and at end of follow-up 49,6 % (62,8 %). In the cox regression analysis the following factors for failure were significant: dislocated fracture, osteosynthesis placement and prior fracture. There were no associations for total hip BMD, neck BMD, age, sex, quality of fracture reduction, walking disability, independent living, alcohol or smoking. A cox regression sub analysis of the undisplaced fractures showed significant result only for osteosynthesis placement. Conclusion. There is no association between BMD and failure of internal fixation in osteosynthesized femoral neck fractures

Introduction. Metal-on-metal hip resurfacing (MOMHR) is a good surgical indication for young active patients. However, it cannot be used in patients with an excessively short femoral head/neck. To address these cases, a new surgical technique has been developed comprising femoral head augmentation using impacted morcellized bone grafts. Methods. 32 osteoarthritis patients who had severe congenital insufficiency of the femoral head/neck were treated with MOMHR combined with femoral head augmentation. Mean patient age was 49 ± 9 years (18–66). The required amount of augmentation was calculated on preoperative X-rays and confirmed during surgery. Using specially designed instrumentation, bone chips produced while reaming the socket and trimming the head were impacted onto the head to achieve the desired reconstruction and lengthening. Finally, the femoral component was cemented. Results. Mean head lengthening was 12 ± 2mm. Mean follow-up was 4.2 years (3–6). Mean preoperative Harris hip score was 58, increasing to 95 at follow-up (p<0.05). Mean leg lengthening was 2.2cm (p=0.001). In all Gruen zones, bone mineral density (BMD) decreased during the first 3 months. At 2 years, in zone 1, mean BMD increased to 96.8% (p=0.009) and to 102.1% in zone 7 (p=0.05). A correlation was found between valgus positioning of the femoral components and increased BMD (p=0.005). To date, only 1 patient has been revised due to socket loosening. Discussion and conclusions. This bone grafting technique expands the use of MOMHR to patients with severe deficiencies of the femoral head, thereby leading to a more anatomical reconstruction with a full recovery of function and BMD of the proximal femur

BACKGROUND CONTEXT. Osteoporosis causes decreased bone mineral density, which predisposes to fragility fractures. Low-energy vertebral compression fractures are the most common type of osteoporotic fragility fracture. Prior studies have shown that only one-quarter of patients diagnosed with an osteoporotic fracture are referred or treated for osteoporosis. PURPOSE. To identify the rate of recurrent fractures after vertebroplasty and after the conservative treatment for patients aged 50 years and older who sustained low impact vertebral compressions fractures over a 6-month period. STUDY DESIGNED/SETTING. Prospective study. PATIENT SAMPLE. The sample included patients 50 years or older who had a low-energy vertebral compression fracture. The patients were divided into two groups: first group (n=24) - patients teated by vertebroplasty and the second group (n=34) - patients treated conservatory. There was no significant difference among the groups in terms of the vertebral levels or BMD. METHODS. Patients records were reviewed for fracture recurrence and in the same time we examined medical records for osteoporotic medication prescriptions, refferals to endocrinology and to dual-energy X-ray absorptiometry (DEXA) scans. RESULTS. Confounding factors of age at the procedure, sex and chronic steroids use were considered and found to have no statistically significant difference between the two groups and between those with fracture recurrence and those without fracture recurrence. Four vertebroplasty procedure resulted in a recurrent fracture within the first 6 months. In the patient group treated conservatory 8 patients sustained recurrent fractures. Patients with recurrent vertebral fracture didn't receive active osteoporosis treatment. Within 6 months after the fracture only 21% of patients were receiving active osteoporosis treatment. CONCLUSIONS. The incidence of recurrent fracture after vertebroplasty or after conservative treatment is substantial but have no statistically significant difference between the two groups. We consider that the recurrence rate is not related with the surgical intervention but is the result of natural history of the patient's osteoporosis because the patients do not understand the importance of initiating active therapeutic intervention for osteoporosis recommended by physicians

Despite proven advantages, pulsatile lavage seems to be used infrequently during preparation in cemented total knee arthroplasty. This remains irritating, as the technique has been suggested to improve radiological survival in cemented TKA, where aseptic loosening of the tibial component represents the main reason for revision. Furthermore, there may be a potential improvement of fixation strength for the tibial tray achieved by increased cement penetration. In this study, the influence of pulsed lavage on mechanical stability of the tibial component and bone cement penetration was analyzed in a cadaveric setting. Six pairs of cadaveric, proximal tibia specimen underwent computed tomography (CT) for assessment of bone mineral density (BMD) and exclusion of osseous lesions. Following surgical preparation, in one side of a pair, the tibial surface was irrigated using 1800ml normal saline and pulsatile lavage, while in the other side syringe lavage using the identical amount of fluid was applied. After careful drying, bone cement was hand-pressurized on the bone surface, tibial components were inserted and impacted in an identical way. After curing of cement, specimen underwent a postimplantation CT analysis). Cement distrubution was then assessed using a three-dimenionsional visualization software. Trabecular bone, cement and implant were segmented based on an automatic thresholding algorithm, which had been validated in a previous study. This allowed to determine median cement penetration for the entire cemented area. Furthermore, fixation strength of the tibial trays was determined by a vertical pull-out test using a servohydraulic material testing machine. Testing was performed under displacement control at a rate of 0,5mm/sec until implant failure. Data was described by median and range. Results were compared by a Wilcoxon matched pairs signed rank test with a type 1 error probability of 5 %. Median pull-out forces in the pulsed lavage group were 1275N (range 864–1391) and 568N (range 243–683) in the syringe lavage group (p=0.031). Cement penetration was likewise increased (p=0.031) in the pulsed lavage group (1.32mm; range 0.86–1.94), when compared to the syringe irrigated group (0.79mm; range 0.51–1.66). Failure occurred in the pulsatile lavage group at the implant-cement interface and in the syringe lavage group at the bone-cement interface, which indicates the weakness of the latter. Altogether, improved mechanical stability of the tibial implant and likewise increased bone cement interdigitation could be demonstrated in the current study, when pulsed lavage is implemented. Enhanced fixation strength was suggested being a key to improved survival of the implant. If this is the case, pulsatile lavage should be considered being a mandatory preparation step when cementing tibial components in TKA

Introduction. Spinal aBMD only explains 50–80% of vertebral strength, and the application of aBMD measurements in isolation cannot accurately identify individuals who are likely to eventually experience bone fracture, due to the low sensitivity of the test. For appropriate treatment intervention, a more sensitive test of bone strength is needed. Such a test should include not only bone mineral density, but also bone quality. Quantitative computed tomography-based finite element methods (QCT/FEM) may allow structural analyses taking these factors into consideration to accurately predict bone strength (PBS). To date, however, basic data have not been reported regarding the prediction of bone strength by QCT/FEM with reference to age in a normal population. The purpose of this study was thus to create a database on PBS in a normal population as a preliminary trial. With these data, parameters that affect PBS were also analyzed. Methods. Participants in this study comprised individuals who participated in a health checkup program with CT at our hospital in 2009. Participants included 217 men and 120 women (age range, 40–89 years). Exclusion criteria were provided. Scan data of the second lumber vertebra (L2) were isolated and taken from overall CT data for each participant obtained with simultaneous scans of a calibration phantom containing hydroxyapatite rods. A FE model was constructed from the isolated data using Mechanical Finder software. For each of the FE models, A uniaxial compressive load with a uniform distribution and uniform load increment was applied. For each participant, height and weight were measured, BMI was calculated. Simple linear regression analysis was used to estimate correlations between age and PBS as analyzed by QCT/FEM. Changes in PBS with age were also evaluated by grouping participants into 5-year age brackets. One-way analysis of variance was used to compare average PBS for participants in each age range. Mean PBS in the 40–44 year age range was taken as the young adult mean (YAM). The ratio of mean PBS in each age group to YAM was calculated as a percentage. A multivariate statistical technique was used to determine how PBS was affected by age, height, weight, and BMI. Result/Discussion. Mean PBS was lower in women than in men for all age ranges. PBS in men and women significantly decreased with age. Simple linear regression between age and PBS showed the annual rate of decline in PBS was 55 N/year in men and 164 N/year in women. Mean PBS in the 75–79 year age range was 77% of YAM in men and in women, that in the 70–79 year age range was 47% of YAM. PBS was strongly dependent on age, while physical status had less effect

Aims

Despite limited clinical scientific backing, an additional trochanteric stabilizing plate (TSP) has been advocated when treating unstable trochanteric fractures with a sliding hip screw (SHS). We aimed to explore whether the TSP would result in less post operative fracture motion, compared to SHS alone.

Aims

The incidence of atypical femoral fractures (AFFs) continues to increase. However, there are currently few long-term studies on the complications of AFFs and factors affecting them. Therefore, we attempted to investigate the outcomes, complications, and risk factors for complication through mid-term follow-up of more than three years.

Aims

Minimally invasive fixation of pelvic fragility fractures is recommended to reduce pain and allow early mobilization. The purpose of this study was to evaluate the outcome of two different stabilization techniques in bilateral fragility fractures of the sacrum (BFFS).