Objectives. The aim of this study was to examine whether asymmetric loading influences macrophage elastase (MMP12) expression in different parts of a rat tail intervertebral disc and growth plate and if MMP12 expression is correlated with the severity of the deformity. Methods. A wedge deformity between the ninth and tenth tail vertebrae was produced with an Ilizarov-type mini external fixator in 45 female Wistar rats, matched for their age and weight. Three groups were created according to the degree of deformity (10°, 30° and 50°). A total of 30 discs and vertebrae were evaluated immunohistochemically for immunolocalisation of MMP12 expression, and 15 discs were analysed by western blot and zymography in order to detect pro- and active MMP12. Results. No MMP12 expression was detected in the nucleus pulposus. Expression of MMP12 in the annulus progressively increased from group I to groups II and III, mainly at the concave side. Many growth plate chondrocytes expressed MMP12 in the control group, less in group I and rare in groups II and III. Changes in cell phenotype and reduction of cell number were observed, together with disorganisation of matrix microstructure similar to disc degeneration. ProMMP12 was detected at the area of 54 kDa and active MMP12 at 22 kDa. Conclusions. Expression of MMP12 after application of asymmetric loading in a rat tail increased in the intervertebral disc but decreased in the growth plate and correlated with the degree of the deformity and the side of the wedged disc. Cite this article: Bone Joint Res 2014;3:273–9

Background. Osteophytes in the posterior compartment of the knee pose a challenge in achieving soft tissue balance during total knee arthroplasty (TKA). Previous investigations have demonstrated the importance of various factors involved in obtaining flexion and extension gap balance, including the precision of femoral and tibial bone cuts as well as tensioning of the supporting pericapsular soft tissue structures (ligaments, capsule, etc.). However, the role of posterior compartment osteophytes has not been well studied. We hypothesize that space-occupying posterior structures affect soft tissue balance, especially in lesser degrees of flexion, in a cadaveric TKA model. Methods. Five cadaveric limbs were acquired. CT scans were obtained of each specimen to define the osseous contours. 3D printed specimen-specific synthetic osteophytes were fabricated in two sizes (10mm and 15mm). Posterior-stabilized TKAs were performed. Medial and lateral contact forces were measured during a passive range of motion using OrthoSensor ® (Dania Beach, FL) technology. For each specimen, trials were completed without osteophytes, and with 10mm and 15mm osteophytes applied to the posterior medial femur, with iterations at 0°, 10°, 30°, 45°, 60°, and 90° of flexion. These were recorded across each specimen in each condition for three trials. Tukey post hoc tests were used with a repeated measures ANOVA for statistical data analysis. Results. The presence of posterior medial osteophytes increased asymmetric loading from 0°– 45° of flexion. The 25–75% bounds of variability in the contact force was less than 3.5lbs. Conclusions. In this cadaveric TKA model, posterior femoral osteophytes caused an asymmetric increase in contact forces from full extension continuing into mid-flexion. To avoid unnecessary soft tissue releases, we recommend early removal of posterior femoral osteophytes prior to performing ligament releases to obtain desired soft tissue balance during TKA

Osteoarthritic (OA) changes to the bone morphology of the proximal tibia may exhibit load transfer patterns during total knee arthroplasty not predicted in models based on normal tibias. Prior work highlighted increased bone density in transverse sections of OA knees in the proximal-most 10mm tibial cancellous bone. Little is known about coronal plane differences, which could help inform load transfer from the tibial plateau to the tibial metaphysis. Therefore, we compared the cancellous bone density in OA and cadaveric (non-OA) subjects along a common coronal plane. This study included nine OA patients (five women, average age 59.1 ± 9.4 years) and 18 cadaver subjects (four women, average age 39.5 ± 14.4 years). Patients (eight with medial OA and one with lateral OA) received pre-operative CT scans as standard-of-care for a unicompartmental knee replacement. Cadavers were scanned at our institution and had no history of OA which was confirmed by gross inspection during dissection. 3D reconstructions of each proximal tibia were made and an ellipse was drawn on the medial and lateral plateau using a previously published method. A coronal section (Figure 1) to standardize the cohort was created using the medial ellipse center, lateral ellipse center, and the tibial shaft center 71.5mm from the tibial spine. On this section, profile lines were drawn from the medial and lateral ellipse centers, with data collected from the first subchondral bone pixel to a length of 20mm. The Hounsfield Units (HU) along each profile line was recorded for each tibia; a representative graphical distribution is shown in Figure 2. The Area Under the Curve (AUC) was calculated for the medial and lateral sides, which loosely described the stiffness profile through the region of interest. To determine differences between the medial and lateral subchondral bone density, the ratio AUC[medial] / AUC[lateral] was compared between the OA and cadaver cohorts using a two-sample t-test. Data from the sole lateral OA patient was mirror-imaged to be included in the OA cohort. The majority of the OA patients appeared to have higher subchondral bone density on the affected side. Figure 3 compares the medial and laterals sides of each group using the AUC ratio method described above. For the cadaver group the AUC was 1.2 +/− 0.22, with a median of 1.1 [0.9 1.6], smaller than the mean AUC for the OA group, which was 1.4 +/− 0.39, with a median of 1.6 [0.93 2.1]. The p-value was 0.06. The increased density observed in OA patients is consistent with asymmetric loading towards the affected plateau, resulting in localized remodeling of cancellous bone from the epiphysis to metaphysis. From the coronal plane, bone was often observed in OA patients bridging the medial plateau to the metaphyseal cortex. Although the cadaver subjects were normal from history and gross inspection, some subjects exhibited early bone density changes consistent with OA. Future work looks to review more OA scans, extend the work to the distal femur, and convert the HU values to bone elastic moduli for use in finite element modelling

It was previously postulated that the IV disc wedging is a significant progressive factor for mild IS curves. The present report introduces an innovative comprehensive model of IS curves progression based on intervertebral disc (IV) diurnal variation and the subsequent patho-biomechanics of the deforming “three joint complex”, where vertebral growth occurs. Throughout day and night, due to sustained loading and unloading, the scoliotic wedged IV disc expels fluid and imbibes it more convex-wise. The convex side of the IV sustains a greater amount of cyclic expansion than the concave side. Consequently the imposed, convex-wise, asymmetrical concentrated cyclical loads to the adjacent immature vertebral end plates and posterior elements of the spine lead to asymmetrical vertebral growth. More specifically the loading on the two facet-joins asymmetrically increases during the day, as the wedged IV space narrows due to expelled water and it asymmetrically decreases during the night, as the IV space swells due to imbibed water. This 24 hour period cyclic asymmetric loading leads both to asymmetric growth of the end plates and wedging of the vertebral bodies, and to similarly asymmetric growth of the pedicles and arches posteriorly as an effect of Hüeter-Volkmann law. This model explains the well described anatomical findings of the more elongated pedicles and the larger facet joints in the convex side than in the concave in scoliotic spines

Introduction: Painful anterior vertebral wedge “fractures” can occur without any remembered trauma, suggesting that vertebral deformity could accumulate gradually through sustained loading by the process of “creep”. If the adjacent intervertebral discs are degenerated, they press unevenly on the vertebral body in a posture- dependent manner, producing differential creep of the vertebra. We hypothesise that differential creep due to sustained asymmetrical loading of a vertebral body can cause anterior vertebral wedge deformity. Materials And Methods: Eleven thoracolumbar motion segments aged 64–88 yrs were subjected to a 1.5 kN compressive force for 2 hrs, applied via plaster moulded to its outer surfaces. Specimens were positioned in 2° flexion to simulate a stooped posture. Reflective markers attached to pins inserted into the lateral cortex of each vertebral body enabled anterior, middle and posterior vertebral body heights to be measured at 1Hz using an optical tracking device. Compressive ‘stress’ acting vertically on the vertebral body was quantified by pulling a miniature pressure transducer along the midsagittal diameter of adjacent discs. Results: Elastic deformation (strain) was higher anteriorly (−2018 ± 2983 μ strain) than posteriorly (−1675 ± 1305 μ strain). Creep strain (−2867 ± 2527 μ strain) was significantly higher anteriorly (p< 0.05) than posteriorly (−1164 ± 1026 μ strain), and was associated with a higher compressive stress in the anterior annulus of the adjacent disc. Non-recoverable creep deformations were significantly higher anteriorly (p< 0.05), and were equivalent to a wedging angle of 0.01–0.3°. Conclusion: Creep can cause anterior wedge deformity of the vertebral body. In the long term, accumulating creep could cause more severe (and painful?) deformity

Purpose: Glenoid component loosening is a common reason for failed total shoulder arthroplasty. Multiple factors have been suggested as causes for component loosening including asymmetric loading of the glenoid prosthesis by the humeral head (rocking horse phenomenon). A novel technique was employed to measure in-vitro strain in the subchondral bone adjacent to a cemented all polyethylene pegged glenoid prosthesis. The purpose of the study was to develop and validate a testing protocol to investigate load transfer in the polyethylene glenoid implant and bone construct. Method: Eight polyethylene components were implanted using standard cementing techniques in eight cadaveric specimens. Loading was performed with a pneumatic actuator capable of applying loads at various angles. A dynamic 10 N/s force was applied for a total of 15 seconds producing a maximum force of 150N at angles of 0, 10, 20, 30, 40 and 50o. Strain gauges were placed around the implant 1mm proximal to the bone-cement interface at the four quadrants. The humeral head was simulated with a custom steel ball with a non-conforming diameter in relation to the prosthesis that is typical in total shoulder arthroplasty. Results: During pure compressive loading, tension was observed in the superior and inferior quadrants of the glenoid. Superior and inferior loading caused increasing same side (ipsilateral) tension, occurring from 0 to 30o and 0 to 20o, respectively. Compression was recorded superiorly when loading was applied at 40o and 50o in the superior direction while contralateral tension was recorded in the inferior gauges. Strain measurements were less consistent in the anterior and posterior glenoid quadrants and varied between tension and compression. Conclusion: Tension measurements in the ipsilateral direction at lower angles were unexpected. This observation differs from the previous assumption that applied loads at relatively perpendicular angles to the implant should dissipate as compression. Tension at the bone cement interface is unfavorable. The identification of tension in some quadrants of the implant in this study, therefore, may have revealed a mechanism of implant loosening. Our data support the previously described rocking horse phenomena and also illustrate a new umbrella type effect of polyethylene flexure, which causes the periphery of the glenoid implant to flex upwards superiorly and inferiorly. These findings have the potential to influence future designs of total shoulder arthroplasty perhaps leading to increased implant survival

Introduction: Loads acting on scoliotic spines are thought to be asymmetrical and involved in progression of the scoliotic deformity. Abnormal loading patterns could lead to changes in bone and disc cell and activity and hence to vertebral body and disc wedging. At present however there are no direct measurements of intradiscal stresses or pressures in scoliotic spines. Methods: Stress profilometry was used to measure horizontal and vertical stresses at 5mm intervals across 25 intervertebral discs of 7 scoliotic patients during anterior reconstructive surgery. Identical horizontal and vertical stresses for at least two consecutive readings defined a region of hydrostatic pressure. Results were compared with similar stress profiles measured during surgery across 10 discs of 4 spines with no lateral curvature and with data from the literature. Results: Profiles across scoliotic discs were very different from those measured across normal discs of a similar age. Hydrostatic pressure regions were only seen in 16/25 discs, extended only over a short distance and were displaced towards the convexity. Mean pressures were significantly greater (0.24MPa) than those measured in other anaesthetised patients (< 0.06 MPa). A stress peak in the concave annulus was a common feature (13/25) in scoliotic discs. In 21/25 discs, stresses in the concave annulus were greater than in the convex annulus, indicating asymmetric loading in these anaesthetised, recumbent patients. Conclusions: Intradiscal pressures and stresses in scoliotic discs are abnormal even in the absence of significant applied load. Disc cells respond to changes in pressure, hydration and deformation by altering matrix synthesis and turnover in vivo and in vitro. Hence, whatever the cause of the abnormal pressures and stresses in the scoliotic discs, if present during daily life, these could lead to disc matrix changes and especially if asymmetrical, to disc wedging and progression of the scoliotic deformity. Work supported by Fondation Cotrel

Aims

This systematic review aims to identify 3D predictors derived from biplanar reconstruction, and to describe current methods for improving curve prediction in patients with mild adolescent idiopathic scoliosis.

Aims

The presence of facet tropism has been correlated with an elevated susceptibility to lumbar disc pathology. Our objective was to evaluate the impact of facet tropism on chronic lumbosacral discogenic pain through the analysis of clinical data and finite element modelling (FEM).

Introduction: Atraumatic vertebral deformity could possibly arise from sustained loading by the adjacent intervertebral discs, especially when discs are degenerated and press unevenly on the vertebra (. 1. ). Creep phenomena have been studied in samples of cancellous and cortical bone, but little is known about their potential to deform whole bones. We hypothesise that sustained asymmetrical loading of a vertebral body can cause differential creep, and vertebral deformity. Materials and methods: Five thoracolumbar ‘motion segments’ (two vertebrae with intervening soft tissues) were dissected from human cadavers aged 64-88 yrs. Each specimen was subjected to a 1.5 kN compressive force for 2 hrs, applied via plaster moulded to its outer surfaces. Specimens were positioned in 2 deg flexion to simulate a stooped posture. Six reflective markers were attached to pins inserted into the lateral cortex of each vertebral body. Anterior, middle and posterior vertebral body heights were measured at 1 Hz to an accuracy of 7 microns, using a MacReflex 2D optical tracking device. This enabled elastic and creep strains in the vertebral cortex to be plotted against time. Compressive ‘stress’ acting vertically on the vertebral body was quantified by pulling a miniature pressure transducer along the mid-sagittal diameter of adjacent discs (. 1. ). Results: Maximum elastic compressive strains in the posterior, middle and anterior cortex were 500-700, 800-2000 and 600-2500 microstrains respectively. Corresponding creep strains were 200-1500, 200-3200 and 500-5500 microstrains. Increased strains in the anterior vertebral body corresponded to increased stresses in the anterior annulus of adjacent discs. Creep was greater in older specimens, and was only partially reversible. ‘Permanent’ anterior wedging of the vertebral body could reach 0.7 deg after 2 hrs. Discussion: These preliminary results suggest that vertebral deformity in-vivo can arise by creep mechanisms, when total (elastic+creep) strain locally exceeds the yield strain of bone (. 2. ). Future experiments will consider the middle vertebra in three-vertebra specimens

Introduction: Experimental pinealectomy in chickens shortly after hatch produces scoliosis with morphological characteristics similar to that of human idiopathic scoliosis (Coillard et al., 1996). The objective of this study was to develop a finite element model (FEM) incorporating vertebral growth to analyse how bone growth modulation by mechanical loading affects development of scoliosis in chicken. Materials and Methods: We have adapted the experimental set-up of Bagnall et al. (1999) to study spine growth of pinealectomised chickens. Three groups were followed for a period of six weeks:. wild-type (controls) (n=25);. shams (surgical controls) (n=20);. pinealectomised (n=76). The experimental data was used to adapt a FEM previously developed to simulate the scoliosis deformation process in human (Villemure et al. 2002). The FEM consists of 7 thoracic vertebrae and the first lumbar, the intervertebral discs and the zygapophyseal joints. The geometry was measured on specimens using a calliper. The material properties of human spines were used as initial approximation. The growth process included a baseline growth (0.130 mm/day) and a growth modulation behaviour proportional to the stress and to a sensitivity factor. It was implemented through an iterative process (from the 14th to the 28th day). Asymmetric loads (2–14 Nmm) were applied to represent different paravertebral muscle abnormalities influenced by the induced melatonin defect. Results: Within the pinealectomised group, 55% of the animals (n = 42) developed a scoliosis. In the FEM model, by varying the value of the applied moment, different scoliosis configurations were simulated. The resulting Cobb angle varied between 6° and 37°, while the maximal vertebral wedging appeared at T4 or T5 (range between 5° to 28°). A descriptive comparison of the simulation results with the experimental deformation patterns (n = 41; mean Cobb angle: 26°) was made as a preliminary validation. In 2 typical cases, the scoliotic shapes were quite similar to that seen in the scoliotic chickens. Discussion and Conclusion: The basic mechanisms by which the metabolism of the growing spine is affected by mechanical factors remain not well known, and especially the role of tissue remodelling and growth adaptation in scoliosis. The agreement between the experimental study and preliminary simulation results shows the feasibility of the model to simulate the scoliotic deformation process in pinealectomised chickens. When completely developed and validated this modelling approach could help investigating the pathomechanisms involved in the scoliotic deformation process. Especially, computer simulations could be used to complement bio-molecular and mechanobiological studies concerning the neuroendocrinal hypothesis implicating melatonin signalling dysfunction, which could trigger a complex cascade of molecules and mechanoreceptors leading to an accumulation of specific factors in specialised tissues (Moreau et al. 2004), directly or indirectly implicated in proprioception, and which can be implicated in the pathomechanisms of scoliotic deformities

Aims

The aim of this study was to assess the ability of morphological spinal parameters to predict the outcome of bracing in patients with adolescent idiopathic scoliosis (AIS) and to establish a novel supine correction index (SCI) for guiding bracing treatment.

Aim: This study tested quantitatively whether calculated loading asymmetry of a spine with scoliosis, together with measured bone growth sensitivity to altered compression could explain the observed rate of scoliosis progression during adolescent growth. Scoliosis is thought to progress during growth because angular deformity produces asymmetrical spinal loading, generating asymmetrical growth, etc. in a ‘vicious cycle’. Materials and Methods: The magnitude of asymmetrical spinal loading was estimated for a spine with scoliosis, assuming physiologically plausible muscle activation strategies. In animal studies of vertebral and tibial growth plates of three different species, the growth plate response to sustained compression was measured and correlated with histological measures of chondrocytic proliferation and hypertrophic enlargement. These data were expressed in a linear formulation of growth G as a function of compressive stress, thus:. G = Gm(1-β(_-_m)); where β=1.68 MPa-1 was the empirically determined constant. (The subscript m signifies the ‘baseline’ growth and physiological stress). The vertebral and discal contributions to human adolescent spinal growth velocity were measured from stereo-radiographs of 208 patients of with scoliosis. The estimates of level-specific spinal loading asymmetry, together with the relationship expressing growth sensitivity to load were included in an analysis that was used to estimate the resulting asymmetrical vertebral growth, and its contribution to the progression of a scoliosis curvature. The initial geometry represented a lumbar scoliosis of 26° Cobb, averaged and scaled from measurements of fifteen patients’ radiographs. Spinal growth during each of the adolescent years was estimated from growth curves obtained from cross-sectional logistic-correlation of the radiographically determined spinal and vertebral heights versus age. Results: The analyses of mechanically modulated growth of the spine with an initial 26° Cobb scoliosis predicted curve progression for the majority of eleven loading conditions (effort magnitude and direction) that were analysed. The averaged final lumbar spinal curve magnitude was 34° Cobb at age 16 years when the efforts producing the spinal loading were at 50% of maximum effort, and it was 42° Cobb when the efforts were at 75% of maximum. Conclusions: An analysis that included analytically determined spinal load asymmetry and empirically determined growth sensitivity to load predicted that a substantial component of scoliosis progression during growth is biomechanically mediated. Clinical Relevance: The rationale for conservative management of scoliosis during skeletal growth assumes a biomechanical mode of deformity progression (Hueter-Volkmann principle). The present study provides a quantitative basis for this previously qualitative hypothesis. The findings suggest that an important difference between progressive and non-progressive scoliosis might lie in the differing muscle activation strategies adopted by individuals, leading to the possibility of improved prognosis and conservative interventions, as well as treatments employing early minimally invasive localised growth modulation or arrest

Aims

Spinal fusion remains the gold standard in the treatment of idiopathic scoliosis. However, anterior vertebral body tethering (AVBT) is gaining widespread interest, despite the limited data on its efficacy. The aim of our study was to determine the clinical efficacy of AVBT in skeletally immature patients with idiopathic scoliosis.

Aims

There is little information about how to manage patients with a recurvatum deformity of the distal tibia and osteoarthritis (OA) of the ankle. The aim of this study was to evaluate the functional and radiological outcome of addressing this deformity using a flexion osteotomy and to assess the progression of OA after this procedure.

Aims

To clarify the asymmetrical ossification of the epiphyseal ring between the convex and concave sides in patients with adolescent idiopathic scoliosis (AIS).

Aims

The purpose of this study was to examine whether leg-length discrepancy (LLD) following unilateral total hip arthroplasty (THA) affects the incidence of contralateral head collapse and subsequent THA in patients with bilateral osteonecrosis, and to determine factors associated with subsequent collapse.

Aims

The aim of this study was to investigate the impact of maturity status at the time of surgery on final spinal height in patients with an adolescent idiopathic scoliosis (AIS) using the spine-pelvic index (SPI). The SPI is a self-control ratio that is independent of age and maturity status.

Objectives

Osteosynthesis of anterior pubic ramus fractures using one large-diameter screw can be challenging in terms of both surgical procedure and fixation stability. Small-fragment screws have the advantage of following the pelvic cortex and being more flexible.

The aim of the present study was to biomechanically compare retrograde intramedullary fixation of the superior pubic ramus using either one large- or two small-diameter screws.