Advertisement for orthosearch.org.uk
Results 1 - 8 of 8
Results per page:
Orthopaedic Proceedings
Vol. 103-B, Issue SUPP_3 | Pages 76 - 76
1 Mar 2021
Malik A Alexander J Khan S Scharschmidt T
Full Access

The management of primary malignant bone tumors with metastatic disease at presentation remains a challenge. While surgical resection has been shown to improve overall survival among patients with non-metastatic malignant bone tumors, current evidence regarding the utility of surgery in improving overall survival in metastatic patients remains limited.

The 2004–2016 National Cancer Database (NCDB) was queried using International Classification of Diseases 3rd Edition (ICD-O-3) topographical codes to identify patients with primary malignant bone tumors of the extremities (C40.0-C40.3, C40.8 and C40.9) and/or pelvis (C41.4). Patients with malignant bone tumors of the axial skeleton (head/skull, trunk and spinal column) were excluded, as these cases are not routinely encountered and/or managed by orthopaedic oncologists. Histological codes were used to categorize the tumors into the following groups - osteosarcomas, chondrosarcomas, and Ewing sarcomas. Patients who were classified as stage I, II or III, based on American Joint Commission of Cancer (AJCC) guidelines, were excluded. Only patients with metastatic disease at presentation were included in the final study sample. The study sample was divided into two distinct groups – those who underwent surgical resection of the primary tumors vs. those who did not receive any surgery of the primary tumor. Kaplan-Meier survival analysis was used to report unadjusted 5-year overall survival rates between patients who underwent surgical resection of the primary tumor, compared to those who did not. Multi-variate Cox regression analyses were used to assess whether undergoing surgical resection of the primary tumor was associated with improved overall survival, after controlling for differences in baseline demographics, tumor characteristics (grade, location, histological type and tumor size), and treatment patterns (underwent metastatectomy of distal and/or regional sites, positive vs. negative surgical margins, use of radiation therapy and/or chemotherapy). Additional sensitivity analyses, stratified by histologic type for osteosarcomas, chondrosarcomas and Ewing sarcomas, were used to assess prognostic factors for overall survival.

A total of 2,288 primary malignant bone tumors (1,121 osteosarcomas, 345 chondrosarcomas, and 822 Ewing sarcomas) with metastatic disease at presentation were included – out of which 1,066 (46.0%) underwent a surgical resection of the primary site. Overall 5-year survival rates, on unadjusted Kaplan-Meier log-rank analysis, were significantly better for individuals who underwent surgical resection vs. those who did not receive any surgery (31.7% vs. 17.3%; p<0.001). After controlling for differences in baseline demographics, tumor characteristics and treatment patterns, undergoing surgical resection of primary site was associated with a reduced overall mortality (HR 0.42 [95% CI 0.36–0.49]; p<0.001). Undergoing metastectomy (HR 0.92 [95% CI 0.81–1.05]; p=0.235) was not associated with a significant improvement in overall survival. On stratified analysis, radiation therapy was associated with improved overall survival for Ewing Sarcoma (HR 0.71 [95% CI 0.57–0.88]; p=0.002), but not for osteosarcoma (HR 1.14 [95% CI 0.91–1.43]; p=0.643) or chondrosarcoma (HR 1.08 [95 % CI 0.78–1.50]; p=0.643). Chemotherapy was associated with improved overall survival for osteosarcoma (HR 0.50 [95% CI 0.39–0.64]; p<0.001) and chondrosarcoma (HR 0.62 [95% CI 0.45–0.85]; p=0.003), but not Ewing sarcoma (HR 0.79 [95% CI 0.46–1.35]; p=0.385).

Surgical resection of the primary site significantly improves overall survival for primary malignant bone tumors with metastatic disease at presentation. Physicians should strongly consider surgical resection of the primary tumor, with adjunct systemic and/or radiation therapy (dependent on tumor histology), in patients presenting with metastatic disease at presentation.


Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_5 | Pages 57 - 57
1 Mar 2017
Noble P Gold J Patel R Lenherr C Jones H Ismaily S Alexander J
Full Access

INTRODUCTION

Cementless tibial trays commonly fail through failure of fixation due to excessive interface motion. However, the specific combination of axial and shear forces precipitating implant failure is unknown. This has led to generic loading profiles approximating walking to perform pre-clinical assessment of new designs, even though telemetric data demonstrates that much larger forces and moments are generated during other functional activities. This study was undertaken to test the hypotheses: (i) interface motion of cementless tibial trays varies as a function of specific activities, and (ii) the response of the cementless tibial interface to walking loading is not representative of other functional activities.

MATERIALS and METHODS

Six fresh-frozen cadaveric tibias were tested using a custom designed functional activity simulator after implantation of a posterior stabilized total knee replacement (NexGen LPS, Zimmer, Warsaw IN). Activity scenarios were selected using force (Fx, Fy, Fz) and moment (Mx, My, Mz) data from patients with instrumented tibial trays (E-tibia) published by Bergmann et al. A pattern of black and white spray paint was applied to the surface of the specimen including the tibial tray and bone. Each specimen was preconditioned through application of a vertical load of 1050N for 500 cycles of flexion-extension from 5–100°. Following preconditioning, each tibia was loaded using e-tibia values of forces and moments for walking, stair-descent, and sit-to-stand activities. The differential motion of the tibial tray and the adjacent bony surface was monitored using digital image correlation (DIC) (resolution: 1–2 microns in plane; 3–4 microns out-of-plane). Four pairs of stereo-images of the tray and tibial bone were prepared at sites around the circumference of the construct in both the loaded and unloaded conditions: (i) before and after pre-conditioning and (ii) before and after the 6 functional loading profiles. The images were processed to provide circumferential measurements of interface motion during loading. Differences in micromotion and migration were evaluated statistically using step-wise multivariate regression.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_3 | Pages 91 - 91
1 Jan 2016
Derasari A Gold J Alexander J Kim SW Patel R Parekh J Incavo S Noble P
Full Access

Introduction

Mechanically-assisted corrosion of the head-neck junction present a dilemma to surgeons at revision THR whenever the femoral component is rigidly fixed to the femur. Many remove the damaged femoral head, clean the femoral taper and fix a new head in place to spare the patient the risks associated with extraction and replacement of the well-functioning femoral stem. This study was performed to answer these research questions:

Will new metal heads restore the mechanical integrity of the original modular junction after impaction on corroded tapers?

Which variables affect the stability of the new interface created at revision THR?

Materials and Methods

Twenty-two tapers (CoCr, n=12; TiAlV, n=10) were obtained for use in this study. Ten stems were in pristine condition, while 12 stems had been retrieved at revision THR and with corrosion damage to the trunnion (Goldberg scale 4). Twenty-two new metal heads were obtained for use in the study, each matching the taper and manufacturer of the original component. The following test states were performed using a MTS Machine: 1. Assembly, 2. Disassembly, 3. Assembly, 4. Toggling and 5. Disassembly. All head assemblies were performed wet using 50% calf serum in accordance to ISO 7206-10. During toggling, each specimen's loading axis was aligned 25° to the trunnion axis in the frontal plane and 10° in the sagittal plane (Figure 1). Toggling was performed at 1Hz for 2,000 cycles with a sinusoidal loading function (230N–4300N). During loading, 3D motion of the head-trunnion junction was measured using a custom jig rigidly attached to the head and the neck of each prosthesis. Relative displacement of the head with respect to the neck was continuously monitored using 6 high resolution displacement transducers with an accuracy of ±0.6µm. Displacement data was independently validated using FEA models of selected constructs.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_2 | Pages 9 - 9
1 Feb 2015
Alexander J Chohan A Selfe J Richards J May K
Full Access

Background

Low back pain (LBP) is widespread in all populations and is a worldwide health problem, which poses substantial challenges for clinical management. Individuals with LBP may reduce their symptoms by implementing self-managed at-home interventions. The theoretical design of the LumbaCurve™ promotes the principles of a passive gravity-assisted traction (PGAT) stretch of the lumbar and sacral region in order to reduce LBP. This study aimed to assess the clinical effectiveness of the LumbaCurve™ in the management of LBP when compared to a control group of standardised care.

Methods

Following a screening form using Red Flags and STarT Back tools, 60 individuals with LBP were recruited to the 4-week intervention. Eligible participants completed a pre-intervention questionnaire and were randomly allocated to either ‘standardised care’ or ‘standardised care PLUS LumbaCurve™’ group. Intervention material was trialled for 4 weeks consecutively, followed by a post-intervention questionnaire. Pre and post assessments applied the Roland Morris Disability Questionnaire (RMDQ), Patient Reported Outcome Measures (PROMS).


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 142 - 142
1 Dec 2013
Alexander J Hexter A Ismaily S Hart A Noble P
Full Access

Introduction

Tribo-chemical damage of modular taper junctions is often observed at revision THR and may be a contributing factor to chronic inflammation of peri-prosthetic tissues through generation of chromium rich corrosion products. At the time of revision, surgeons may elect to leave the primary femoral stem in situ and replace the original femoral head with a new component. This decision is based on the assumption that the interface formed between the original trunnion and the new bore is capable of withstanding the loads and torques applied during use, without failure of the new interface. This study was performed to determine the extent to which the mechanical properties of the taper interface are degraded with varying degrees of tribo-chemical damage secondary to prior implantation.

Materials and Methods

Fifteen CoCr femoral heads (DePuy: 6, Smith & Nephew: 5; Zimmer: 4) were retrieved at revision THR and were examined with stereomicroscopy. The surface of each bore was scored for the presence of fretting and corrosion using the grading system of Goldberg et al. Nine additional heads in original (unimplanted) condition (3 per manufacturer) were also selected to act as controls. Each head was manually assembled on a matching unimplanted TiAlV trunnion in a mechanical testing machine (MTS Bionix) and loaded at 500N/sec to a maximum assembly load of 4000N. The head/trunnion specimen was then mounted in a torsional loading fixture and immersed in bovine serum. A cyclic torque was applied to the head with an initial maximum value of 2 Nm. The specimen was unloaded and held for a 30 sec wait period and the torsional loading was repeated to a peak value of 4 Nm. With each torsional cycle the peak torque was increased by 2 Nm until the taper junction underwent rotational failure. During testing, relative motion between the femoral head and the trunnion was measured with a displacement transducer (DVRT-3, MicroStrain, accuracy = ± 0.1%, resolution = 1.5 μm, hysteresis & repeatability = ± 1 μm). A separate disassembly test was performed by first assembling each specimen with 4000N and then applying a distraction force at 0.008 mm/sec until separation.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 85 - 85
1 Dec 2013
Noble P Ismaily S Gold J Stal D Brekke A Alexander J Mathis K
Full Access

Introduction:

Despite all the attention to new technologies and sophisticated implant designs, imperfect surgical technique remains a obstacle to improving the results of total knee replacement (TKR). On the tibial side, common errors which are known to contribute to post-operative instability and reduced function include internal rotation of the tibial tray, inadequate posterior slope, and excessive component varus or valgus. However, the prevalence of each error in surgeries performed by surgeons and trainees is unknown. The following study was undertaken to determine which of these errors occurs most frequently in trainees acquiring the surgical skills to perform TKR.

Materials and Methods:

A total of 43 knee replacement procedures were performed by 11 surgical trainees (surgical students, residents and fellows) in a computerized training center. After initial instruction, each trainee performed a series of four TKR procedures in cadavers (n = 2) and bone replicas (n = 2) using a contemporary TKR instrument set and the assistance of an experienced surgical instructor. Prior to each procedure, computer models of each cadaver and/or bone replica tibia were prepared by reconstructing CT scans of each specimen. All training procedures were performed in a navigated operating room using a 12 camera motion analysis system (Motion Analysis Inc.) with a spatial resolution in all three orthogonal directions of ± 0.15 mm.

The natural slope, varus/valgus alignment, and axial rotation of the proximal tibial surface were recorded prior to surgery and after placement of the tibial component. For evaluation of all data, acceptable limits for implantation were defined as: posterior slope: 0–10°; varus/valgus inclination of tibial resection: ± 3°; and external rotation: 0–10°.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 176 - 176
1 Jun 2012
Ismaily S Turns L Gold J Alexander J Mathis K Noble P
Full Access

Introduction

Although the “learning curve” in surgical procedures is well recognized, little data exists documenting the accuracy of surgeons in performing individual steps of orthopedic procedures. In this study we have used a validated computer-based training system to measure variations instrument placement and alignment in TKA, specifically those relating to tibial preparation.

Methods

Eleven trainees (surgical students, residents and fellows) were recruited to perform a series of 43 knee replacement procedures in a computerized training center. After initial instruction, each trainee performed a series of four TKA procedures in cadavers (n=2) and bone replicas (n=2) using a contemporary TKA instrument set and the assistance of an experienced surgical instructor. The Computerized Bioskills system was utilized to monitor the placement and orientation of the proximal tibial osteotomy and the tibial tray.


The Journal of Bone & Joint Surgery British Volume
Vol. 61-B, Issue 1 | Pages 101 - 106
1 Feb 1979
Alexander J Barron D

A prospective study on 227 patients undergoing arthroplasty of the hip was carried out with reference to the effects on the cardiovascular and respiratory systems. Investigations revealed that the placing of acrylic bone cement and the prosthesis in the femoral shaft produced clinical and biochemical disturbances which were consistent with pulmonary microembolism. A fall in arterial oxygen tension during the procedure and hypoxaemia extending into the postoperative period with elevation of serum lipase and a fall in triglycerides supported the idea that embolisation with marrow fat occurred. The method of venting (by catheter or proximal hole) did not influence the biochemical disturbances. The implications of these findings are discussed.