Advertisement for orthosearch.org.uk
Results 1 - 3 of 3
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 409 - 410
1 Nov 2011
Stulberg S Moen T Ghate R Salaz N
Full Access

Originally introduced in 1997, porous tantalum is an attractive alternative metal for orthopaedic implants because of its unique mechanical properties. Porous tantalum has been used in numerous types of orthopaedic implants, including acetabular cups in total hip arthroplasty. The early clinical results from porous tantalum acetabular cups have been promising. The purpose of this study was to evaluate the presence of bone ingrowth and the incidence of osteolytic lesions in the acetabular cup -at 10 year follow up – in patients who had a total hip arthroplasty with a monoblock porous tantalum acetabular cup.

50 consecutive patients underwent a total hip arthroplasty with a monoblock porous tantalum acetabular component. All patients had computed tomography at an average of 10 years of follow-up. The computed tomography scan used a standard, validated protocol to evaluate bony ingrowth in the cup and for the presence of osteolysis.

The computed tomographic scans showed evidence of extensive bony ingrowth, and no evidence of osteolysis.

This study reports the 10-year results of a monoblock porous tantalum acetabular cup. This is the first study to evaluate a porous tantalum acetabular cup with the use of computed tomography. These results show that a porous tantalum monoblock cup has excellent bony ingrowth and no evidence osteolysis at 10 year follow-up. These results suggest that porous tantalum is an attractive material for implantation in young, active patients.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 449 - 449
1 Nov 2011
Puri L Moen T Villacis D
Full Access

When compared with traditional techniques, computer-assisted total knee arthroplasty (TKA) has been shown to allow more accurate coronal alignment of the implants with fewer “outliers.” Most navigation systems in computer-assisted TKA utilize rigidly-fixed trackers placed on both the femur and tibia, a computer workstation, and navigation software to determine the mechanical axis of the extremity intraoperatively, in real time. The purpose of this study was to report the initial experience of a single surgeon with a novel navigation system. This system utilizes a “pinless” technique using trackers that are mounted at the articular surface of the knee instead of being fixed to the femur and tibia.

Sixty-Six consecutive TKAs were performed using a novel “pinless” navigation system by a single surgeon. At 4 weeks post-operatively, coronal alignment was assessed with long-standing AP radiographs. The alignment measurements were then compared to historical controls.

The average alignment in the coronal plane was 1.73° +/−1.50° deviation from neutral alignment. Variance was 2.26°. The c onfidence interval constructed with an alpha value of.05 was (1.50°, 2.40°). Five knees had a coronal alignment greater than 3° from neutral. Of these five, three had an ipsilateral total hip replacement, and 2 were morbidly obese. There were no pin site infections nor pin site fractures. There was 1 late hematogenous infection.

This study reports an initial single-surgeon experience of a novel “pinless” navigation technique for TKA. The technique in this study is a novel and safe method to reconstruct a neutral mechanical axis, as it avoids the morbidity of the application of navigation tracking pins and therefore enhances patient safety.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 7 - 8
1 Mar 2010
Koo S Koh J Moen T Nuber G
Full Access

Purpose: Recent advances in arthroscopic shoulder surgery has expanded the options available to surgeons repairing rotator cuff tears. There are now a variety of suture techniques that arthroscopists can use to fix tears but limited data on which might work best, particularly for double row techniques. The objective of this study was to compare the initial cyclic loading and load to failure properties of two arthroscopic double row fixation with that of the open double row technique.

Method: Thirty sheep shoulders were harvested and the infraspinatus tendons dissected free from all surrounding muscles and osseous attachments. Three double row stitch configurations (arthroscopic standard, arthroscopic mason-allen, open mason-allen) were performed and tested. The shoulders were then secured in a material testings machine and cyclically loaded between 5 and 100 N at 0.20 Hz for 10 cycles and then loaded to failure under displacement control at 1 mm/sec. Stiffness and ultimate load were measured and compared. The failure type, either through suture or anchor pull out, was also recorded.

Results: None of the specimens failed under cyclic loading. The ultimate load to failure was significantly higher for the open double row and the arthroscopic mason-allen compared to the standard double row technique. No significant differences in stiffness were found among the stitches. All failures occurred at the suture-tendon junction.

Conclusion: In this in vitro cadaver sheep study, the arthroscopic mason-allen and open mason-allen techniques had a significantly higher ultimate load to failure than the standard double row technique. Stitching methods that strengthen the tendon-suture interface can improve the strength of double row rotator cuff repairs.