Advertisement for orthosearch.org.uk
Results 1 - 5 of 5
Results per page:
Orthopaedic Proceedings
Vol. 103-B, Issue SUPP_3 | Pages 49 - 49
1 Mar 2021
Pasic N Degen R Burkhart T
Full Access

Hip arthroscopy rates continue to increase. As a result, there is growing interest in capsular management techniques. Without careful preservation and surgical techniques, failure of the repair result in capsular deficiency, contributing to iatrogenic instability and persistent post-operative pain. In this setting, capsular reconstruction may be indicated, however there is a paucity of objective evidence comparing surgical techniques to identify the optimal method. Therefore, the objective of this study was to evaluate the biomechanical effect of capsulectomy and two different capsular reconstruction techniques (iliotibial band [ITB] autograft and Achilles tendon allograft) on hip joint kinematics in both rotation and abduction/adduction.

Eight paired fresh-frozen hemi-pelvises were dissected of all overlying soft tissue, with the exception of the hip joint capsule. The femur was potted and attached to a load cell connected to a joint-motion simulator, while the pelvis was secured to a custom-designed fixture allowing adjustment of the flexion-extension arc. Optotrak markers were rigidly attached to the femur and pelvis to track motion of the femoral head with respect to the acetabulum. Pairs were divided into ITB or Achilles capsular reconstruction. After specimen preparation, three conditions were tested: (1) intact, (2) after capsulectomy, and (3) capsular reconstruction (ITB or Achilles). All conditions were tested in 0°, 45°, and 90° of flexion. Internal rotation (IR) and external rotation (ER) as well abduction (ABD) and adduction (ADD) moments of 3 N·m were applied to the femur via the load cell at each position. Rotational range of motion and joint kinematics were recorded.

When a rotational force was applied the total magnitude of internal/external rotation was significantly affected by the condition of the capsule, independent of the type of reconstruction that was performed (p=0.001). The internal/external rotation increased significantly by approximately 8° following the capsulectomy (p<0.001) and this was not resolved by either of the reconstructions; there remained a significant difference between the intact and reconstruction conditions (p=0.035). The total anterior/posterior translation was significantly affected by the condition of the capsule (p=0.034). There was a significant increase from 6.7 (6.0) mm when the capsule was intact to 9.0 (6.7) mm following the capsulectomy (p=0.002). Both of the reconstructions (8.6 [5.6] mm) reduced the anterior/posterior translation closer to the intact state. There was no difference between the two reconstructions. When an abduction/adduction force was applied there was a significant increase in the medial-lateral translation between the intact and capsulectomy states (p=0.047).

Across all three flexion angles the integrity of the native hip capsule played a significant role in rotational stability, where capsulectomy significantly increased rotational ROM. Hip capsule reconstruction did not restore rotational stability and also increased rotational ROM compared to the intact state a statistically significant amount. However, hip capsule reconstruction restored coronal and sagittal plane stability to approach that of the native hip. There was no difference in stability between ITB and Achilles reconstructions across all testing conditions.


Orthopaedic Proceedings
Vol. 102-B, Issue SUPP_7 | Pages 28 - 28
1 Jul 2020
Burkhart T Baha P Getgood A Degen R
Full Access

While hip arthroscopy utilization continues to increase, capsular management remains a controversial topic. Therefore the purpose of this research was to investigate the biomechanical effect of capsulotomy and capsular repair techniques on hip joint kinematics in varying combinations of sagittal and coronal joint positions.

Eight fresh-frozen hemipelvises (4 left, 6 male) were dissected of all overlying soft tissue, with the exception of the hip joint capsule. The femur was potted and attached to a load cell, while the pelvis was secured to a custom-designed fixture allowing static alteration of the flexion/extension arc. Optotrak markers were rigidly attached to the femur and pelvis to track motion of the femoral head with respect to the acetabulum.

Following specimen preparation, seven conditions were tested: i) intact, ii) after portal placement (anterolateral and mid-anterior), iii) interportal capsulotomy (IPC) [35 mm in length], iv) IPC repair, v)T-capsulotomy [15 mm longitudinal incision], vi) partial T-repair (vertical limb), vii) full T-repair. All conditions were tested in 15° of extension (−15˚), 0°, 30°, 60° and 90° of flexion. Additionally, all flexion angles were tested in neutral, as well as maximum abduction and adduction, resulting in 15 testing positions. 3Nm internal and external rotation moments were manually applied to the femur via the load cell at each position. Rotational range of motion and joint kinematics were recorded.

IPC and T-capsulotomies increased rotational ROM and mediolateral (ML) joint translation in several different joint configurations, most notably from 0–30˚ in neutral abduction/adduction. Complete capsular repair restored near native joint kinematics, with no significant differences between any complete capsular repair groups and the intact state, regardless of joint position. An unrepaired IPC resulted in increased rotational ROM, but no other adverse translational kinematics. However, an unrepaired or partially repaired T-capsulotomy resulted in increased rotational ROM and ML translation.

The results of this study show that complete capsular repair following interportal or T-capsulotomy adequately restores rotational ROM and joint translation to near intact levels. Where feasible, complete capsular closure should be performed, especially following T-capsulotomy. However, further clinical evaluation is required to determine if adverse kinematics of an unrepaired capsule are associated with patient reported outcomes.


Orthopaedic Proceedings
Vol. 102-B, Issue SUPP_6 | Pages 149 - 149
1 Jul 2020
Burkhart T Getgood A Abbott M Dentremont A
Full Access

Previous studies have identified the anterolateral complex (ALC) as having an important role in controlling anterolateral rotatory laxity following anterior cruciate ligament injury and subsequent reconstruction. In particular, injury to the iliotibial band (ITB) and its component deep (dITB) and capsulo-osseous (coITB) layers, have been shown to significantly correlate with different grades of the pivot-shift test in patients with acute ACL injuries. However, the kinematic properties of the capsulo-osseous layer of the ITB, throughout knee range of motion, are not fully understood.

The purpose of this study was to quantify the kinematic behaviour of the capsulo-osseous layer of the ITB through various degrees of knee flexion. Ten fresh-frozen cadaveric knee specimens were dissected to expose the capsulo-osseous layer of the iliotibial band. Radiopaque beads were embedded, at standardized increments (12.5%, 25%, 50% and 75% of total length from proximal to distal), into the tissue and fluoroscopic images were taken from 0o to 105o of knee flexion in 15° increments. The positions of the beads were identified in each image and the length, width, and area changes of the capsulo-osseous layer were calculated. Comparisons of the total length of the anterior and posterior borders of the coITB through knee ROM were conducted using a two-way (8 knee angles by 2 borders) repeated measures analysis of variance (rm-ANOVA), whereas the effect of knee angle on isometry and total area changes was assessed using one-way rm-ANOVAs (α=0.05)

There was a significant increase in the length of the anterior capsulo-osseous layer at flexion angles greater than 15o and on the posterior border at angles greater than 75 o with changes occurring primarily at 12.5 % of the total length. In addition, at all flexion angles the length changes were significantly larger in the anterior border compared to the posterior border. Meanwhile, non-homogenous decreases in width and area were found with increasing flexion angle. The distance between the capsulo-osseous layer insertion on the distal femur and proximal tibia significantly increased from 60o-105o, maximal changes occurred at 105o (9.64 [4.12] %, p = 0.003).

The primary finding of this study was that the coITB behaved in a non-isometric fashion, with significant increases in length occurring at flexion angles greater than 15o. Moreover, these changes in length were non-homogenous across the different regions of the coITB that were investigated, with the greatest changes occurring in the proximal segments (0–25%). The data presented here suggest that coITB in flexion angles from 0o to 105o behaves in a non-isometric fashion, with the majority of its length change occurring in its proximal segment. Further quantification of the pathway that the coITB takes with respect to osseous landmarks may result in improvements in ALC procedures as an augmentation to ACL reconstruction, thereby potentially improving rotational stability and clinical outcomes.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_21 | Pages 64 - 64
1 Dec 2016
Corbo G Lording T Burkhart T Getgood A
Full Access

Injury to the anterolateral ligament (ALL) has been reported to contribute to high-grade anterolateral laxity following anterior cruciate ligament (ACL) injury. Failure to address ALL injury has been suggested as a cause of persistent rotational laxity following ACL reconstruction. However, lateral meniscus posterior root (LMPR) tears have also has been shown to cause increased internal rotation and anterior translation of the knee. Due to the anatomic relationship of the ALL and the lateral meniscus, we hypothesise that the ALL and lateral meniscus work synergistically, and that a tear to the LMPR will have the same effect on anterolateral laxity as an ALL tear in the ACL deficient knee.

Sixteen fresh frozen cadaveric knee specimens were potted into a hip simulator(femur) and a six degree-of-freedom load cell (tibia). Two rigid optical trackers were inserted into the proximal femur and distal tibia, allowing for the motion of the tibia with respect to the femur to be tracked during biomechanical tests. A series of points on the femur and tibia were digitised to create bone coordinate systems that were used to calculate the kinematic variables. Biomechanical testing involved applying a 5Nm internal rotation moment to the tibia while the knee was in full extension and tested sequentially in the following three conditions: i) ACLintact; ii) Partial ACL injury (ACLam) – anteromedial bundle sectioned; iii) Full ACL injury (ACLfull). The specimens were then randomised to either have the ALL sectioned first (ALLsec) followed by the LMPRsec or vice versa. Internal rotation and anterior translation of the tibia with respect to the femur were calculated. A mixed two-way (serial sectioning by ALL section order) repeated measures ANOVA (alpha = 0.05).

Compared to the ACLintact condition, internal rotation was found to be 1.78° (p=0.06), 3.74° (p=0.001), and 3.84° (p=0.001) greater following ACLfull, LMPRsec and ALLsec respectively. LMPRsec and the ALLsec resulted in approximately 20 of additional internal rotation (p=0.004 and p=0.01, respectively) compared with the ACL deficient knee (ACLfull). No difference was observed between the ALL and LMPR sectioned states, or whether the ALL was sectioned before or after the LMPR (p=0.160). A trend of increasing anterior translation was observed when the 5Nm internal rotation moment was applied up until the ACL was fully sectioned; however, these differences were not significant (p=0.070).

The ALL and LMPR seem to have a synergistic relationship in aiding the ACL in controlling anterolateral rotational laxity. High-grade anterolateral laxity following ACL injury may be attributed to injuries of the ALL and/or the LMPR. We suggest that the lateral meniscus should be thought of as part of the anterolateral capsulomeniscal complex (i.e., LM, ITB, and ALL) that acts as a stabiliser of anterolateral rotation in conjunction with the ACL.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_20 | Pages 86 - 86
1 Nov 2016
Burkhart T Perry K Dobbin E Herman B Howard J Lanting B
Full Access

The purpose of this study was to determine the effect of sectioning the relevant soft tissues and a TKA on the medial and lateral knee joint gap.

Twelve intact lower extremity cadaveric specimens (mean (SD) age 76.5 (11.6) years) were tested. A custom designed knee tensioner was developed that allowed the separate application of forces to the medial and lateral components of the knee. The distance between the bottom of the load cell and the top of a compression rod was measured with digital calipers (precision = 0.1mm). Loads of 100N and 200N were then applied to each compartment and the resulting displacement was measured. The two loads were applied to the knee in the following conditions: i) All soft tissues intact; ii) an arthrotomy; iii) ACL sectioned; iv) PCL sectioned; v) release of the mid-coronal tissues; and vi) TKA. Finally, tensions were applied for all conditions from 90° to 0° of knee flexion in 30° increments.

There was a significant effect of soft tissue release on the magnitude of the gap at the 100N load application, such that there was an increase in the when the mid-coronal MCL release was performed compared to the intact (2.2mm) and arthrotomy (1.75mm) conditions. With respect to the 200N load application there was a statistically significant tissue release effect, where differences were detected between the mid-coronal MCL release and intact (3.04mm) and arthrotomy conditions (2.31mm). At the 100N load there was a significance increase in the gap compared to the intact knee. There was also a significant condition by knee angle interaction where the gap was approximately 4mm larger following the TKA compared to the intact condition when the knee was flexed at 90°. Furthermore, there was a statistically significant 4.8mm and 3.8mm difference between 90° and 0° and 60° and 0° of knee flexion respectively, for the TKA condition only. At the 200N load application the gap width increased significantly by 2.5mm following the TKA. Finally, there was a significant condition by knee angle interaction where the change in gap width increased significantly from the intact (7.54mm) to the TKA condition (13.88mm) at 90° of knee flexion. There was a statistically significant difference in the TKA condition between 60° and 0° of knee flexion.

Releasing the soft tissues increases the gap between the tibia and femur, when compared to the intact condition, with significance occurring only following the mid-coronal release. Furthermore, the TKA did not return the knee to its intact state as was evident by the significant difference between the TKA and intact conditions. This suggests that the resulting kinematics may not accurately match those pre-surgery resulting in un-physiological motion patterns and the possibility of early failure and revision.