header advert
Results 21 - 30 of 30
Results per page:
Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_10 | Pages 84 - 84
1 May 2016
Trinh T Kang K Lim D Yoo O Lee M Jang Y
Full Access

Introduction

Revision total knee arthroplasty (TKA) has been often used with a metal block augmentation for patients with poor bone quality. However, bone defects are frequently detected in revision TKA used with metal block augmentation. This study focused on identification of a potential possibility of the bone defect occurrence through the evaluation of the strain distribution on the cortical bone of the tibia implanted revision TKA with metal block augmentation, during high deep flexion.

Materials and Methods

Composite tibia finite element (FE) model was developed and revision TKA FE model with a metal block augmentation (Baseplate size #5 44AP/67ML, Spacer size #5 44AP/67ML, Stem size Φ9, L30, Augment #5 44AP/67ML thickness 5mm) was integrated with the composite tibia FE model. 0°, 30° 60°, 90°, 120° and 140° flexion positions were then considered with femoral rollback phenomenon [Fig 1.A]. A compressive load of 1,600N through the femoral component was applied to the composite tibia FE model integrated with the tibia component, sharing by the medial and lateral condyles, simulating a stance phase before toe-off [Fig 1.B].


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIV | Pages 76 - 76
1 Oct 2012
Song E Seon J Kang K Park C Yim J
Full Access

This prospective study was undertaken to compare the clinical and radiological results and the in vivo stabilities of anteromedial (AM) and posterolateral (PL) bundle augmentation during anterior cruciate ligament (ACL) reconstruction.

Forty-two ACL partial tears that underwent isolated bundle augmentation (22 AM and 20 PL bundles) were evaluated with a minimum follow-up of 1 year. For in vivo intraoperative stability testing, anteroposterior and external/internal rotation stabilities were measured at 0, 30, 60, and 90° of flexion using a navigation system. Ranges of motion, Lachman and pivot shift test results, Tegner activity scores, and Lysholm knee scores of the AM and PL bundle groups were compared. In addition, Telos arthrometer determined stabilities were compared.

In-vivo intraoperative stability testing showed that mean preoperative anterior translation at 30° of flexion was greater in the AM group (8.7 vs. 6.5, p = 0.04), whereas mean rotational amount was larger in the PL group (by 2.9 at 0° and 3.6 at 30° of flexion). After ACL reconstruction, no significant differences were found between the two groups in terms of anterior and rotational stabilities at any flexion angle. Furthermore, clinical outcomes in the two groups were not significantly different. Lachman and pivot shift test results and instrumented laxity findings were similar for the two groups at final follow up.

In this study, the authors carefully preserved the remnant injured ACL, and achieved excellent anterior stability recoveries and good rotatory stabilities. No significant intergroup difference was found in terms of intraoperative stability or clinical parameters after ACL reconstruction.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIV | Pages 77 - 77
1 Oct 2012
Song E Seon J Kang K Park C Yim J
Full Access

The purpose of this study were to evaluate early intra-operative experiences of a custom-fit total knee arthroplasty (TKA) system and to determine the precision of long leg alignment and component placement achieved using this system.

Seventeen patients underwent sagittal MRI of an arthritic knee to determine component placement for TKA from October 2010 and March 2011. Cutting guides were machined to control all intra-operative cuts, and cutting guide placements were recorded by navigation system. Radiographic parameters regarding mechanical axis changes, and inclinations of the femoral and tibial components were measured. Outcome was defined as “excellent” when values of each parameters were within ± 2°, as “acceptable” when within ± 3°, and as “outliers” when >± 3° of optimum.

The cutting guide placement was within ±2° of the target angle for inclinations of femoral and tibial components. The cutting heights were within 2mm for distal femoral and proximal tibia. Mechanical axis changed from a mean of 8.57° varus to 0.49° valgus, and mean coronal inclinations of femoral and tibial components were 89.52° and 90.12°, respectively, at last follow up visits. There were no outliers and all of them were classified as excellent. Mean sagittal inclinations of the femoral and tibial components were 1.06° and 84.56°, respectively. There were no intra-operative or acute post-operative complications.

The custom-fit TKA system system provides an effective, safe means of achieving an accurate mechanical axis and of reducing prosthetic alignment outliers. However, further long term follow-up is needed.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIV | Pages 44 - 44
1 Oct 2012
Song E Seon J Kang K Park C Yim J
Full Access

This study was performed to measure intra-operative varus-valgus laxities from 0° to 90° of flexion during cruciate retaining total knee arthroplasty (TKA) using the modified balanced gap technique. Forty nine patients awaiting unilateral TKA for osteoarthritis were enrolled into this prospective study. Flexion and extension gaps were measured at full extension and at 90° of flexion using a tensioning device before femoral bone cutting. After implantation and closing the medial parapatellar arthrotomy, varus-valgus laxities at 0, 30, 60 and 90° of flexion were also measured using a navigation system.

Mean total varus-valgus laxities were significantly less at 0° of flexion (3.8±1.7°) than at the other selected flexion angles. Mean varus laxity was peaked at 3.1±2.2° at 60° of flexion and reached a nadir of 2.0±1.0° at 0° of flexion, which represented a significant difference. On increasing flexion from 0° to 60°, mean valgus laxity increased from 1.8±1.3° to 2.9±1.6°, which was significant, but no significant difference was found for other angles.

The use of the balanced gap technique for cruciate retaining TKA using a navigation system, which allows accurate soft tissue balancing via real time gap size feedback, could be helpful for achieving good in vivo laxities throughout range of motion without significant mid flexion laxity.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIV | Pages 41 - 41
1 Oct 2012
Song E Seon J Kang K Park C Yim J
Full Access

The elevation of the joint line is considered a possible cause of mid-flexion instability in total knee arthroplasty (TKA). The authors evaluated the effects of joint line change on mid-flexion stability in cruciate retaining TKA.

Seventy-nine knees treated by cruciate retaining TKA using a modified balanced gap technique were included in this prospective study. After prosthesis insertion, valgus and varus stabilities were measured under valgus and varus stress using a navigation system at 0, 30, 60 and 90° of knee flexion. Changes of joint lines were measured preoperatively and postoperatively and compared. The knees were allocated to a “No change group (≤4mm, 62 patients)” or to an “Elevation group (>4mm, 17 patients)”. Medio-lateral stabilities (defined as the sums of valgus and varus stabilities measured intra-operatively) were compared in the two groups.

The mean joint line elevation was 4.6mm in the no change group and 1.7mm in the elevation group. Mean medio-lateral stability at 30° of knee flexion was 4.8±2.3 mm in the no change group and 6.3±2.7 mm in the elevation group, and these values were significantly different (p = 0.02). However, no significant differences in medio-lateral stability were observed at other flexion angles (p>0.05).

Knees with a < 5mm joint line elevation provide better mid-flexion stability after TKA. The results of this study suggest that a < 5mm elevation in joint line laxity is acceptable for cruciate retaining TKA.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIV | Pages 49 - 49
1 Oct 2012
Song E Seon J Kang K Park C Yim J
Full Access

Recently, axial radiography has received attention for the assessment of distal femur rotational alignment, and satisfactory results have been as compared with the CT method. The purpose of this study was to assess rotational alignment of the femoral component in knee flexion by axial radiography and to compare flexion stabilities achieved by navigational and robotic total knee arthroplasty (TKA). In addition, the authors also evaluated the effects of flexion stability on functional outcomes in these two groups.

Sixty-four patients that underwent TKA for knee osteoarthritis with a minimum of follow-up of 1 year constituted the study cohort. Patients in the navigational group (N = 32) underwent TKA using the gap balancing technique and patients in the robotic group (N = 32) underwent TKA using the measured resection technique. To assess flexion stability using axial radiography a novel technique designed by the authors was used. Rotations of femoral components and mediolateral gaps in the neutral position on flexion radiographs was measured and compared. Valgus and varus stabilities under valgus-varus stress loading, and total flexion stabilities (defined as the sum of valgus and varus stability) were also compared, as were clinical outcomes at final follow up visits.

A significant difference was found between the navigation and robotic groups for mean external rotation of the femoral component (2.1° and 0.4°, respectively; p = 0.003). Mean mediolateral gap in neutral at 90° flexion position was 0.17° in the navigation group and 0.07° in the robotic group (p = 0.126), and mean total stability was 7.82° in the robotic group and 8.10° in the navigation group (p = 0.35). Clinically, no significant intergroup difference was found in terms of ranges of motion, HSS scores, KS scores, or WOMAC scores.

Both navigational and robotic techniques provide excellent clinical and flexion stability results. Furthermore, axial radiography was found to provide a useful, straightforward means of detecting rotational alignment, flexion gaps, and flexion stability.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIV | Pages 50 - 50
1 Oct 2012
Song E Seon J Kang K Park C Yim J
Full Access

The purpose of this study was to compare posterior tibial slope preoperatively and postoperatively in patients undergoing navigational opening-wedge High tibial osteotomy (HTO) and to compare posterior slope changes for 2 and 3-dimentional (D) navigation versions.

Between May 2009 and September 2010, 35 patients with unicompartmental osteoarthritis and varus deformity were treated by navigation-assisted open-wedge HTO. Patients were randomly divided into two groups according to the version of the Orthopilot (Aesculap) navigation system used; 2D group (18 patients, 2-D version) and 3D group (17 patients, 3-D version). Radiologic evaluations were conducted using pre- and postoperative leg axes. Posterior slope of proximal tibiae were measured using the proximal tibial anatomic axis method.

Postoperatively the mechanical axis was corrected adequately to a mean valgus of 2.81° in 2D group and of 3.15° in 3D group. Mean posterior slopes were well maintained, and measured 7.9° and 10.3° preoperatively and 8.99° and 9.14° postoperatively in 2D and 3D groups, respectively. No significant difference was found between the two navigation versions with respect to posterior tibial slope; mean tibial slope changes were 1.09° and −0.2° in 2D and 3D groups (p = 0.04).

Navigation-assisted opening-wedge HTO greatly improves the accuracy of the desired postoperative mechanical femorotibial axis and posterior tibial slope, and the use of 3D navigation results in significantly less change in posterior tibial slope. The authors recommend the use of the 3D navigation because they provide real time intraoperative information about coronal, sagittal, and transverse axis, which are important for the maintenance of a normal posterior tibial slope.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIV | Pages 86 - 86
1 Oct 2012
Song E Seon J Kang K Park C Yim J
Full Access

The preoperative prediction of gap balance after robotic total knee arthroplasty (TKA) is difficult. The purpose of this study was to evaluate the effectiveness of a new method of achieving balanced flexion-extension gaps during robotic TKA.

Fifty one osteoarthritic patients undergoing cruciate retaining TKA using robotic system were included in this prospective study. Preoperative planning was based on the amount of lateral laxity in extension and flexion using varus stress radiograph. After complete milling by the robot and soft tissue balancing, intra-operative extension and flexion gaps were measured using a tensioning device. Knees were subdivided into three groups based on lateral laxities in 0° and 90° of flexion, as follows; the tight extension group (≥ 2mm smaller in extension than flexion laxity), the tight flexion group (≥ 2mm smaller in flexion than extension laxity), and the balanced group (< 2mm difference between laxities). In addition, intra-operative gap balance results were classified as acceptable (0–3mm larger in flexion than in extension), tight (larger in extension than in flexion) or loose (> 3mm larger in flexion than in extension) based on differences between extension and flexion gaps.

During preoperative planning, 34 cases were allocated to the balanced group, 16 to the tight extension group and 1 case was allocated to the tight flexion group. Intra-operative gap balance was acceptable in 46 cases, 4 cases had a tight result, and one case had a loose flexion gap.

We concluded that preoperative planning based on the amount of lateral laxity determined using varus stress radiographs may be useful for predicting intraoperative gap balance and help to achieve precise gap balance during robotic TKA.


The Journal of Bone & Joint Surgery British Volume
Vol. 93-B, Issue 10 | Pages 1400 - 1404
1 Oct 2011
Lee C Chung SS Shin S Park S Lee H Kang K

We examined the differences in post-operative functional disability and patient satisfaction between 56 patients who underwent a lumbar fusion at three or more levels for degenerative disease (group I) and 69 patients, matched by age and gender, who had undergone a one or two level fusion (group II). Their mean age was 66 years (49 to 84) and the mean follow-up was 43 months (24 to 65).

The mean pre-operative Oswestry Disability Index (ODI) and visual analogue scale (VAS) for back and leg pain, and the mean post-operative VAS were similar in both groups (p >  0.05), but post-operatively the improvement in ODI was significantly less in group I (40.6%) than in group II (49.5%) (p < 0.001). Of the ten ODI items, patients in group I showed significant problems with lifting, sitting, standing, and travelling (p < 0.05). The most significant differences in the post-operative ODI were observed between patients who had undergone fusion at four or more levels and those who had undergone fusion at less than four levels (p = 0.005). The proportion of patients who were satisfied with their operations was similar in groups I and II (72.7% and 77.0%, respectively) (p = 0.668). The mean number of fused levels was associated with the post-operative ODI (r = 0.266, p = 0.003), but not with the post-operative VAS or satisfaction grade (p > 0.05). Post-operative functional disability was more severe in those with a long-level lumbar fusion, particularly at four or more levels, but patient satisfaction remained similar for those with both long- and short-level fusions.


The Journal of Bone & Joint Surgery British Volume
Vol. 87-B, Issue 12 | Pages 1666 - 1668
1 Dec 2005
Rowe S Jung S Lee K Bae B Cheon S Kang K

The purpose of this study was to determine the annual incidence of Perthes’ disease in Korea and compare this with other populations. A survey identified all newly diagnosed children with Perthes’ disease aged 14 years or younger in South Honam, Korea, between January 1999 and December 2001. A total of 84 children were included: 29 in 1999, 28 in 2000 and 27 in 2001. The mean annual incidence was 3.8 per 100 000. This is similar to that reported in other Asian countries, but higher than in black populations and lower than in Caucasians.