The December 2023 Hip & Pelvis Roundup³⁶⁰ looks at: Early hip fracture surgery is safe for patients on direct oral anticoagulants; Time to return to work by occupational class after total hip or knee arthroplasty; Is there a consensus on air travel following hip and knee arthroplasty?; Predicting whether patients will achieve minimal clinically important differences following hip or knee arthroplasty; High-dose dual-antibiotic-loaded cement for hip hemiarthroplasty in the UK (WHiTE 8): a randomized controlled trial; Vitamin E – a positive thing in your poly?; Hydroxapatite-coated femoral stems: is there a difference in fixation?

Surgical treatment of Hip PJI by resection of the infected implants and tissue and placement of a “spacer” which elutes antibiotic via antibiotic loaded cement is an accepted treatment option. There is some controversy over whether this “spacer” should be articulating or static. Proponents of the articulating option argue that there is improved function and maintenance of the soft tissue envelop. Critics have suggested that additional biomaterials may compromise eradication of infection. This study compares our results of the 2 treatment options. A review of our institutional PJI database between 2016 and 2021 identified 87 patients who were treated with resection arthroplasty for unilateral total hip PJI. The cohort was analyzed for demographics and type for surgery, as well as medical comorbidities, survivorship, and treatment success. 44 patients were female, the mean age of all patients was 62. 44 patients were treated with Articulating apacers, and 43 patients treated with static spacers. There was no significant difference between ASA or Elixhauser score, and no significant difference between mortality or treatment failure. This study did not show any difference between the patients who receive static spacers, from those who received articulating spacers, and deomstrated similar treatment success rates. From this data there does not appear to be any difference in success rates between those patients that were treated with static spacers and those that were treated with articulating spacers

Aims

Periprosthetic hip-joint infection is a multifaceted and highly detrimental outcome for patients and clinicians. The incidence of prosthetic joint infection reported within two years of primary hip arthroplasty ranges from 0.8% to 2.1%. Costs of treatment are over five-times greater in people with periprosthetic hip joint infection than in those with no infection. Currently, there are no national evidence-based guidelines for treatment and management of this condition to guide clinical practice or to inform clinical study design. The aim of this study is to develop guidelines based on evidence from the six-year INFection and ORthopaedic Management (INFORM) research programme.

Aim. Aim was to compare revision rates when using single versus dual antibiotic loaded cement (ABLC) in hip fracture arthroplasty and aseptic revision hip or knee arthroplasty using data from the Dutch national joint registry (LROI). Methods. All primary cemented (hemi-)arthroplasties for acute hip fractures and cemented aseptic hip or knee revision arthroplasties, were incorporated in 3 datasets. All registered implants between 2007 and 2018 were included (minimum 2 years follow-up). Primary end-point was subsequent revision rates for infection and for any reason in the single and dual ABLC groups. Cumulative crude incidence of revision was calculated using competing risk analysis. Results. A total of 22,308 hip fracture arthroplasties, 2,529 hip revision and 7,124 knee revision arthroplasties were registered and analyzed in the study period. The majority of hip fracture patients (97.1%) was treated with single ABLC. For hip and knee revision arthroplasties dual ABLC was used in 33.8% and 25.7%. The revision rate for infection in the fracture arthroplasty group was not different between groups (0.5% versus 0.8%, p=0.27). The re-revision rate following hip or knee revision based on single versus dual ABLC was not different between groups (3.2% versus 2.8%, p=0.82 for hip revision and 1.8% versus 2.5%, p=0.36 for knee revision). In addition, the re-revision rate for any reason was not different in all three datasets. The crude cumulative revision and re-revision rates for any reason based on single ABLC versus dual ABLC showed no differences in all three datasets. The crude cumulative 7-year re-revision rate for any reason following revision THA with Gentamicin ABLC use was 11.8%, with Gentamicin + Clindamycin ABLC use 13.1% and with Erythromycin + Colistin ABLC use 14.8% (ns). The crude cumulative 9-year re-revision rate for any reason following revision TKA with Gentamicin ABLC use was 17.7% and with Gentamicin + Clindamycin ABLC use 16.5% (ns). Conclusions. In conclusion, we could not show a difference in revision rate for hip fracture arthroplasty or re-revision rates for revision hip- or knee arthroplasty with the use of dual ABLC compared to single ABLC bone cement, with 7and 9 year follow up. The low percentage of dual ABLC in hip fracture arthroplasties in our registry do not enable us to make a reliable estimation of the added value in this patient category. The results of this study do not confirm the potential benefit of dual ABLC use in revision cases

Aims

With increasing burden of revision hip arthroplasty (THA), one of the major challenges is the management of proximal femoral bone loss associated with previous multiple surgeries. Proximal femoral arthroplasty (PFA) has already been popularized for tumour surgeries. Our aim was to describe the outcome of using PFA in these demanding non-neoplastic cases.

Introduction and Objective. The continued effectiveness of antibiotic loaded bone cements is threatened by antibiotic resistance. The common antiseptic, chlorhexidine (CHX), is a potential alternative to antibiotics in bone cements, but conventional salts are highly soluble, causing burst release and rapid decline to subinhibitory local CHX concentrations. Here, chlorhexidine triphosphate (CHX-TP), a low solubility CHX salt, is investigated as an alternative antimicrobial in PMMA bone cements. The aim was to assess duration of antimicrobial release and antimicrobial efficacy, along with handling, setting and mechanical properties of CHX-TP loaded cements, compared with an existing cement formulation containing gentamicin. Materials and Methods. Palacos R (Heraeus Medical, Newbury, UK) with 0, 1, 4, 7 and 12% CHX-TP (w/w) cements were prepared by combining solid CHX-TP with Palacos R components, and compared with Palacos R+G. All cements were prepared without vacuum and under ISO 5833:2002 conditions. Cements were tested under ISO 5833:2002 for compressive and bending properties, setting time, maximum temperature and doughing time. Antimicrobial release from the cements into deionised water was studied and antimicrobial efficacy of unaged and aged cements against Staphylococcus aureus (ATCC 29213) was assessed using a disc diffusion assay. Results. Compressive strength of CHX-TP loaded cements was not significantly different to Palacos R or Palacos R+G (p > 0.05, all exceeding ISO 5833:2002 minimum of 70 MPa). Mean bending strength was significantly lower with CHX-TP loading (p < 0.05) than bending strength of Palacos R and Palacos R+G, though all bending moduli exceeded the ISO 5833:2002 minimum (1800 MPa). All cements studied were within the ISO 5833:2002 limits for setting time (3 to 15 min), doughing time (≤ 5 min) and maximum temperature (90 . o. C). Mean doughing time for Palacos R, Palacos R+G and Palacos R + 12 % CHX-TP respectively: 52.5 s, 45 s and 45 s. Mean setting time and mean maximum temperature for Palacos R, Palacos R+G and Palacos R + 1, 4, 7 and 12% CHX-TP respectively: 11.00 min (73 . o. C), 11.25 min (72 . o. C), 12.25 min (66 . o. C), 10.50 min (70 . o. C), 10.00 min (70 . o. C), 10.75 min (62 . o. C). Sustained CHX release into deionised water was observed from all Palacos R + CHX-TP cements. Duration varied according to CHX-TP dosing and diminished over time, although to an extent that itself varied with dosing. 1 % CHX-TP ceased releasing CHX at 6.9 weeks; 4 % CHX-TP ceased at 67.7 weeks; 7 % and 12 % CHX-TP were ongoing at 75.5 weeks. Palacos R+G cements ceased releasing detectable levels of gentamicin after 14.4 weeks. Palacos R+G and Palacos R + CHX-TP cement discs showed efficacy against S. aureus (ATCC 29213) when applied as prepared (unaged) to S. aureus bacterial lawns in disc diffusion assays, with CHX-TP cements showing dose dependency. Zone of inhibition (ZOI) size was significantly reduced for Palacos R+G cements and Palacos R + 1% CHX-TP cements after 1 week and 6 weeks aging, compared to ZOI from unaged cements (p < 0.05). ZOI size produced by Palacos R + 4, 7, and 12 % CHX-TP cements did not decline significantly after 6 weeks aging (p > 0.05). Conclusions. CHX-TP can be incorporated into the Palacos R cement matrix up to 12% w/w without deterioration of compressive strength, bending modulus, doughing time, setting time or maximum temperature. Bending strength was significantly reduced at all CHX-TP loadings studied. Palacos R + 4, 7 and 12% CHX-TP cements provided sustained CHX release, exceeding the duration of gentamicin release from Palacos R+G, and showed sustained efficacy against S. Aureus after 6 weeks aging, which was not achieved by Palacos R+G cements

Orthopedic device-related bone infection is one of the most distressing complications of the surgical fixation of fractures. Despite best practice in medical and surgical interventions, the rate of infection remains stubbornly persistent, and current estimates indicate that treatment failure rates are also significant. As we approach the limit of the effectiveness of current anti-infective preventative and therapeutic strategies, novel approaches to infection management assume great importance. This presentation will describe our efforts to develop and test various hydrogels to serve as customized antibiotic delivery vehicles for infection prevention and treatment. Hydrogels offer solutions for many of the challenges faced by complex trauma wounds as they are not restricted spatially within a poorly defined surgical field, they often degrade rapidly with no compatibility issues, and releases 100% of the loaded antibiotic. The preliminary data set proving efficacy in preventing and treating infection in both rabbit and sheep studies will be described, including local antibiotic concentrations in the intramedullary canal over time, compared to that of the more conventional antibiotic loaded bone cement. These two technologies show potential for the prevention and treatment of infection in trauma patients, with a clear focus on optimized antibiotic delivery tailored for complex wounds

Aims

Periprosthetic hip and knee infection remains one of the most severe complications following arthroplasty, with an incidence between 0.5% to 1%. This study compares the outcomes of revision surgery for periprosthetic joint infection (PJI) following hip and knee arthroplasty prior to and after implementation of a specialist PJI multidisciplinary team (MDT).

Aims. Patients receiving cemented hemiarthroplasties after hip fracture have a significant risk of deep surgical site infection (SSI). Standard UK practice to minimize the risk of SSI includes the use of antibiotic-loaded bone cement with no consensus regarding type, dose, or antibiotic content of the cement. This is the protocol for a randomized clinical trial to investigate the clinical and cost-effectiveness of high dose dual antibiotic-loaded cement in comparison to low dose single antibiotic-loaded cement in patients 60 years and over receiving a cemented hemiarthroplasty for an intracapsular hip fracture. Methods. The WHiTE 8 Copal Or Palacos Antibiotic Loaded bone cement trial (WHiTE 8 COPAL) is a multicentre, multi-surgeon, parallel, two-arm, randomized clinical trial. The pragmatic study will be embedded in the World Hip Trauma Evaluation (WHiTE) (ISRCTN 63982700). Participants, including those that lack capacity, will be allocated on a 1:1 basis stratified by recruitment centre to either a low dose single antibiotic-loaded bone cement or a high dose dual antibiotic-loaded bone cement. The primary analysis will compare the differences in deep SSI rate as defined by the Centers for Disease Control and Prevention within 90 days of surgery via medical record review and patient self-reported questionnaires. Secondary outcomes include UK Core Outcome Set for hip fractures, complications, rate of antibiotic prescription, resistance patterns of deep SSI, and resource use (more specifically, cost-effectiveness) up to four months post-randomization. A minimum of 4,920 patients will be recruited to obtain 90% power to detect an absolute difference of 1.5% in the rate of deep SSI at 90 days for the expected 3% deep SSI rate in the control group. Conclusion. The results of this trial will provide evidence regarding clinical and cost-effectiveness between low dose single and high dose dual antibiotic-loaded bone cement, which will inform policy and practice guidelines such as the National Institute for Health and Care Excellence guidance on management of hip fractures. Cite this article: Bone Jt Open 2021;2(2):72–78

Despite the increasing availability of bone grafting materials, the regeneration of large bone defects remains a challenge. Especially infection prevention while fostering regeneration is a crucial issue. Therefore, loading of grafting material with antibiotics for direct delivery to the site of need is desired. This study evaluates the concept of local delivery using in vitro and in vivo investigations. We aim at verifying safety and reliability of a perioperative enrichment procedure of demineralized bone matrix (DBM) with gentamicin. DBM (DBMputty, DIZG, Germany) was mixed with antibiotic using a syringe with an integrated mixing propeller (Medmix Systems, Switzerland). Gentamicin, as powder or solution, was mixed with DBM at different concentrations (25 −100 mg/g DBM), release and cytotoxicity was analyzed. For in vivo analysis, sterile drill hole defects (diameter: 6 mm, depth: 15 mm) were created in diaphyseal and metaphyseal bones of sheep (Pobloth et al. 2016). Defects (6 – 8 per group and time point) were filled with DBM or DBM enriched with gentamicin (50 mg/g DBM) or left untreated. After three and nine weeks, defect regeneration was analyzed by µCT and histology. The release experiments revealed a burst release of gentamicin from DBM independent of the used amount, the sampling strategy, or the formulation (powder or solution). Gentamicin was almost completely released after three days in all set-ups. Eluates showed an antimicrobial activity against S. aureus over at least three days. Eluates had no negative effect on viability and alkaline phosphatase activity of osteoblast-like cells (partially published Bormann et al. 2014). µCT and histology of the drill hole defects revealed a reduced bone formation with gentamicin loaded DBM. After nine weeks significantly less mineralized tissue was detectable in metaphyseal defects of the gentamicin group. Histological evaluation revealed new bone formation starting at the edges of the drill holes and growing into the center over time. The amount of DBM decreased over time due to the active removal by osteoclasts while osteoblasts formed new bone. Using this mixing procedure, loading of DBM was fast, reliable and possible during surgical setting. In vitro experiments revealed a burst and almost complete release after three days, antimicrobial activity and good biocompatibility of the eluates. Gentamicin/DBM concentration was in the range of clinically used antibiotic-loaded-cement for prophylaxis and treatment in joint replacement (Jiranek et al. 2006). The delayed healing seen in vivo was unexpected due to the good biocompatibility found in vitro. A reduced healing was also seen in spinal fusion where DBM was mixed with vancomycin (Shields et al. 2017), whereas DBM with gentamicin or DBM/bioactive glass with tobramycin had no negative effect on osteoinductivity or femur defect healing, respectively (Lewis et al. 2010, Shields et al. 2016). In conclusion, loading of DBM with gentamicin showed a proper antibiotic delivery over several days, covering the critical phase shortly after surgery. Due to the faster and complete release of the antibiotic compared to antibiotic loaded cement, the amount of antibiotic should be much lower in the DBM compared to cement

Aims

The aim of this study was to assess the effects of transferring patients to a specialized arthroplasty centre between the first and second stages (interstage) of prosthetic joint infection (PJI) of the knee.

Background. Antibiotic loaded bone cement (ALBC) is commonly used in cemented total hip arthroplasty (THA) in an attempt to reduce the risk of prosthetic joint infection (PJI). However, its role versus plain cement remains controversial due to the potential risk of developing resistant organisms and potential excess costs incurred from its usage. We investigated the relationship of ALBC and plain cement in affecting outcome of revision surgery after primary THA. Methodology. We conducted a retrospective study of data collected from National Joint Registry for England and Wales, Northern Ireland and the Isle of Man between 1. st. September 2005 until 31. st. August 2017. A logistic regression analysis model was used to investigate the association between ALBC versus plain cement and the odds ratio (OR) for revision, adjusting for age, ASA grade, bearing surfaces, head size and cup and stem fixation. Indications for revision recorded in NJR were considered in separate models. Results. We identified 418,925 THAs where bone cements were used (22,037 plain cement; 396,888 ALBC). After adjusting for confounding factors, the risk of revision for infection was lower with ALBC (OR 0.77, 95% CI 0.62–0.95). There was also lower risk of revision for aseptic loosening of stem (OR 0.53, 95% CI 0.39–0.72), aseptic loosening of socket (OR 0.46, 95% CI 0.37– 0.58). When breaking down hips into fully cemented or hybrid fixation, the protective effect of ALBC against infection was only apparent in fully cemented (OR 0.65, 95% CI 0.48–0.87) when compared against hybrid fixation (OR 0.90, 95% CI 0.66–1.23). Discussion. Within the limits of registry analysis, this study has demonstrated an association between the use of ALBC and lower rates of revision for infection and aseptic loosening. Conclusion. This finding supports the current use of ABLC in cemented THAs

Introduction. Periprosthetic joint infection (PJI) is a serious problem and requires great effort and cost for its treatment. Treatment options may vary from resection arthroplasty, retention of prosthesis with debridement, one stage revision and two stage revision with handmade antibiotic impregnated cement spacer or with prefabricated antibiotic loaded cement spacer. Two stage revision remains the gold standard for the treatment of periprosthetic joint infection after Total Hip Arthroplasty (THA). This study was aimed to find the efficacy and cost effectiveness of handmade antibiotic impregnated articulating cement spacer over commercially available prefabricated antibiotic loaded cement spacer for the treatment of deep PJI of hip prosthesis and to evaluate its functional outcome. Material and methods. A total of 23 PJI patients were enrolled in this prospective cohort study. In the two stages of revision, the first stage consisted of thorough debridement, implant removal and implantation of handmade articulating antibiotic impregnated cement spacer. The second stage surgery consisted of removal of cement spacer, thorough debridement and implantation of new prosthesis. All patients were followed for a period of 24 months. Results. A total of 23 patients (15 males and 8 females) underwent two stage revision arthroplasty for chronic periprosthetic joint infection. The mean age of the patient was 57 years. The handmade antibiotic impregnated cement spacer was retained for 16– 20 weeks. Common organism observed was coagulase negative staphylococci followed by Staphylococcus aureus. After an average follow up of 2 years, 20 patients with PJI remained clinically free of infection. In 2 patients there was recurrence of infection. Conclusion. We conclude that two stage revision by hand made cement spacer is successful in eradication of infection with satisfactory functional outcome. Furthermore, these handmade cement spacer are cost effective and their efficacy may be comparable to commercially available prefabricated spacer

Background. Tigecycline, the first member of glycylcycline family, has effective antimicrobial activity against resistant and implant associated infectious organisms. The objectives of this study are to assess the compressive and tensile mechanical strength characteristics of tigecycline loaded bone cement and to compare them with vancomycin and daptomycin loaded bone cements which are used in prosthetic joint infections with resistant microorganisms. Methods. A control group without antibiotics and three antibiotic loaded bone cement groups with varying concentrations (1g, 2g and 3g vancomycin, 0.5g, 1g and 1.5g daptomycin and 50mg, 100mg and 150mg tigecycline) were prepared and tested according to ASTM F451 and ISO 5833 standards. Statistical analysis of the obtained data done by using LSD (least significant difference) and Bonferroni corrected Mann Whitney tests. Results. Both compression and tension tests showed that all determined antibiotic concentrations resulted in significant decrease when compared to the control group. Despite heterogenous statistical results, it was seen that the mechanical strength of tigecycline loaded bone cement was not significantly lower (even higher in some comparisons) when compared to vancomycin and daptomycin loaded bone cements. Conclusion. When used at defined concentrations, tigecycline loaded bone cement does not have mechanical disadvantage compared to vancomycin and daptomycin loaded bone cements. Thus, it should be kept in mind as an option in appropriate clinical situations

Objectives. Investigate the incorporation of an antibiotic in bone cement using liposomes (a drug delivery system) with the potential to promote osseointegration at the bone cement interface whilst maintaining antibiotic elution, anti-microbiological efficacy and cement mechanical properties. Prosthetic joint infection and aseptic loosening are associated with significant morbidity. Antibiotic loaded bone cement is commonly used and successfully reduces infection rates; however, there is increasing resistance to the commonly used gentamicin. Previous studies have shown gentamicin incorporated into bone cement using liposomes can maintain the cement's mechanical properties and improve antibiotic elution. The phospholipid phosphatidyl-l-serine has been postulated to encourage surface osteoblast attachment and in a liposome could improve osseointegration, thereby reducing aseptic loosening. Preliminary clinical isolate testing showed excellent antimicrobial action with amoxicillin therefore the study aims were to test amoxicillin incorporated into bone cement using liposomes containing phosphatidyl-l-serine in terms of antibiotic elution, microbiological profile and mechanical properties. Methods. Amoxicillin was encapsulated within 100nm liposomes containing phosphatidyl-L-serine and added to PMMA bone cement (Palacos R (Heraeus Medical, Newbury, UK)). Mechanical testing was performed according to Acrylic Cement standards (ISO BS 5833:2002). Elution testing was carried out along with microbiological testing utilising clinical isolates. Results. Liposomal encapsulated amoxicillin PMMA bone cement exceeded minimum ISO BS 5833:2002 standards, had better elution at 12.9% when compared with plain amoxicillin (p=0.036 at 48 hours) or commercial gentamicin cement (Palacos R+G, Heraeus Medical, Newbury, UK – previous studies showed 6% elution over the same time period). Amoxicillin showed superior antimicrobial action when compared with gentamicin of the same concentration. However, liposomal encapsulated amoxicillin in solution and liposomal encapsulated amoxicillin in PMMA were both less effective than free amoxicillin in bacterial growth inhibition. The liposomal amoxicillin also seemed to decrease the cement setting time. Conclusions. Phosphatidyl-l-serine containing liposomes maintained the cement's mechanical properties and seemed to have better antibiotic elution, however, had less effective antibacterial action than plain amoxicillin. This difference in antibacterial action requires further investigation along with investigation of osteoblast attachment to phosphatidyl-l-serine containing liposomes within cement. Plain amoxicillin, for those not penicillin allergic, seems to be a credible alternative to gentamicin for incorporation in PMMA bone cement. It has shown superior antibacterial action, which may improve infection rates, whilst maintaining the cement's mechanical properties

Total joint replacement (TJR), such as hip and knee replacement, is commonly used for the treatment of end stage arthritis. The use of Poly (methylmethacrylate) bone cement is a gold standard in such replacement, where it fixes the implant in place and transfer stresses between bone and implant, and frequently used for local delivery of drugs such as antibiotics. The use of antibiotic loaded bone cement is considered a well-established standard in the treatment and prophylaxis of Prosthetic joint infections (PJI). PJIs is a serious problem that decreases success rate of surgery and can be life threatening to patients, where the incidence can reach up 2% in total and hip replacements and up to 40% for revision surgery. Currently used antibiotic loaded bone cements have many limitations, including burst release of < 10% of antibiotic added. This burst release falls rapidly below inhibitory level within few days, which leads to selection of resistant antimicrobial strains and does not provide prophylaxis from early and delayed stage infection. This study aims to provide a controlled release for gentamicin when loaded on Silica nanoparticles (NP) using layer-by-layer technique (LbL) to provide prophylaxis and treatment from postsurgical infections. The gentamicin loaded NPs were incorporated into PMMA bone cement and the new nanocomposite is characterized for gentamicin release, antimicrobial and mechanical properties. Our results showed that the nanocomposite gentamicin release continued for 30 days at concentration 3 times higher than the commercial formulation containing the same amount of gentamicin, where burst release for few days were observed. Moreover, the nanocomposite showed superior antimicrobial inhibition for bacterial growth and good cytocompatibility without adversely affecting the cement compressive strength, bending and fracture toughness properties

Aim. To assess the effectiveness of role of frozen section in revision arthroplasty. Method. 21 patients with infected hip arthroplasties were operated in the form of one or two-staged revision hip arthroplasties. A frozen section was obtained intra-operatively and >5 PMN's/ HPF was considered as a positive indicator of infection. Fig 1 llustrating frozen section image. If the frozen section was reported negative (≤5 PMN's/HPF), the revision prosthesis was implanted after a thorough debridement and a wash. If the frozen section was reported as positive, after the debridement a non-articulating antibiotic loaded cement spacer was implanted for 8 weeks, supplemented with 3 weeks of intravenous antibiotics and 3 weeks of oral antibiotics. This was followed by an antibiotic free interval of 2 weeks. The patient was taken up for a revision surgery once the frozen section study was negative (≤5 PMN's/HPF). The patients were followed up for minimum of 1 year to a maximum of 2 years after the revision for any evidence of infection (assessed clinically and serologically, radiologically). Results. 15 patients had a positive frozen section (>5PMN's/HPF) in the first stage and were treated with prosthesis removal and cement spacer insertion for 8 weeks. In the 2nd stage, out of 15 patients, 14 underwent revision arthroplasty, while 1 patient underwent reapplication of the cement spacer. As per the follow up of ESR & CRP values, clinically and radiologically no patients had any evidence of infection. The average follow up was 17.04 months (range 12–24 months). 1 patient had persistently raised ESR (34mm/hr) which may be attributable to other causes Frozen section analysis of PMN's per high power field had 100% specificity in our patients in detecting periprosthetic joint infection. Conclusions. Intraoperative frozen section study is a reliable indicator in predicting a diagnosis of PJI with good accuracy in ruling out this diagnosis. Frozen section study should thus be considered a relevant part of the challenging diagnostic work-up for patients undergoing revision hip arthroplasty

The infected joint arthroplasty continues to be a very challenging problem. Its management remains expensive, and places an increasing burden on health care systems. It also leads to a long and difficult course for the patient, and frequently a suboptimal functional outcome. The choice of a particular treatment program will be influenced by a number of factors. These include the acuteness or chronicity of the infection; the infecting organism(s), its antibiotic sensitivity profile and its ability to manufacture glycocalyx; the health of the patient; the fixation of the prosthesis; the available bone stock; and the particular philosophy and training of the surgeon. For most patients, antibiotics alone are not an acceptable method of treatment, and surgery is necessary. The standard of care for established infection is two stage revision with antibiotic loaded cement during the interval period and parental antibiotic therapy for six weeks. Single stage revision may have economic and functional advantages, however. We have devised a protocol that dictates the type of revision to be undertaken based on host, organism and local factors. Our protocol has included single stage revision using antibiotic loaded cement in both THA and TKA. This was only undertaken when sensitive organisms were identified pre-operatively by aspiration and appropriate antibiotics were available to use in cement. Patients with immunocompromise, multiple infecting organisms or recurrent infection were excluded. Patients with extensive bone loss that required allograft reconstruction or where a cementless femoral component was necessary were also excluded. Our algorithm was validated first in the hip and extended to infected TKA in 2004. This protocol has now been applied in over 100 TKA revisions for infection between 2004 and 2009. Our single stage revision rate is now over 25%. We continue to see a lower reinfection rate in these carefully selected patients, with high rates of infection control and satisfaction and better functional and quality of life scores than our two stage revision cases. Whilst our indications are arbitrary and not based on specific biomarkers, we present excellent results for selective single stage exchange. A minimum three year follow-up suggests that these patients have shorter hospital stays, higher satisfaction rates and better knee scores. An ongoing evaluation is in place. One stage revision arthroplasty for infection offers potential clinical and economic advantages in selected patients

Aim. Bacterial biofilms play a key role in prosthetic infection (PI) pathogenesis. Establishment of the biofilm phenotype confers the bacteria with significant tolerance to systemic antibiotics and the host immune system meaning thorough debridement and prosthesis removal often remain the only possible course of treatment. Protection of the prosthesis and dead-space management may be achieved through the use of antibiotic loaded cements and beads to release high concentrations of antibiotics at the surgical site. The antibacterial and antibiofilm efficacy of these materials is poorly understood in the context of mixed species models, such as are often encountered clinically. Methods. A P. aeruginosa and S. aureus in vitro co-culture biofilm model was grown using 1/5th BHI supplemented with 20 µM hemin. The ability of beads made from a synthetic calcium sulfate (CaSO4) loaded with vancomycin, tobramycin and vancomycin & tobramycin in combination to prevent biofilm formation and kill established co-culture biofilms were assessed using viable cell counts and confocal scanning laser microscopy (CSLM) over a 7 day time course. To assay for genetic changes to the individual species as a result of their presence together within a biofilm, mutation rates were measured using fluctuation analysis following growth as planktonic and biofilm cultures, alone or in co-culture. Mutants were determined based on their ability to grow on agar plates containing an inhibitory concentration of rifampicin. Mutation rates were calculated using the Ma-Sandri-Sarkar Maximum Likelihood Estimator and 94% confidence intervals compared for significance. Results. Mixed species biofilms displayed differential sensitivity to vancomycin alone and tobramycin alone CaSO4-loaded beads relative to single species biofilms. Preliminary data suggests 10- and 100-fold increase in mutation rates of P. aeruginosa and S. aureus, respectively, when in a co-culture relative to monospecies biofilm which, while further work is needed, may directly or indirectly contribute to the differing antibiotic sensitivities observed. A broad-spectrum intervention of CaSO4-loaded vancomycin & tobramycin beads was able to prevent bacterial colonisation and attenuate P. aeruginosa and S. aureus mixed species biofilm formation for multiple days. Conclusions. Synthetic antibiotic-loaded CS beads, with a broad-spectrum antibiotic combination, have potential to reduce or eliminate mixed species biofilm formation on implant material by providing locally high concentrations over sufficient time periods to aid in the management of PIs. * Stimulan, Biocomposites Ltd