Addressing bone defects is a complex medical challenge that involves dealing with various skeletal conditions, including fractures, osteoporosis (OP), bone tumours, and bone infection defects. Despite the availability of multiple conventional treatments for these skeletal conditions, numerous limitations and unresolved issues persist. As a solution, advancements in biomedical materials have recently resulted in novel therapeutic concepts. As an emerging biomaterial for bone defect treatment, graphene oxide (GO) in particular has gained substantial attention from researchers due to its potential applications and prospects. In other words, GO scaffolds have demonstrated remarkable potential for bone defect treatment. Furthermore, GO-loaded biomaterials can promote osteoblast adhesion, proliferation, and differentiation while stimulating bone matrix deposition and formation. Given their favourable biocompatibility and osteoinductive capabilities, these materials offer a novel therapeutic avenue for bone tissue regeneration and repair. This comprehensive review systematically outlines GO scaffolds’ diverse roles and potential applications in bone defect treatment.

Cite this article: Bone Joint Res 2024;13(12):725–740.

Aims

This cross-sectional study aimed to investigate the in vivo ankle kinetic alterations in patients with concomitant chronic ankle instability (CAI) and osteochondral lesion of the talus (OLT), which may offer opportunities for clinician intervention in treatment and rehabilitation.

The December 2024 Knee Roundup³⁶⁰ looks at: Unicompartmental knee arthroplasty and total knee arthroplasty in the same patient?; Lateral unicompartmental knee arthroplasty: is it a good option?; The fate of the unresurfaced patellae in contemporary total knee arthroplasty: early- to mid-term results; Tibial baseplate migration is not associated with change in PROMs and clinical scores after total knee arthroplasty; Unexpected positive intraoperative cultures in aseptic revision knee arthroplasty: what effect does this have?; Kinematic or mechanical alignment in total knee arthroplasty surgery?; Revision total knee arthroplasty achieves minimal clinically important difference faster than primary total knee arthroplasty; Outcomes after successful DAIR for periprosthetic joint infection in total knee arthroplasty.

The December 2024 Arthroplasty Roundup³⁶⁰ looks at: Aspirin for hip and knee arthroplasty?; VTE prophylaxis; VTE prophylaxis part II.

Aims

This study aimed to determine clinical outcomes; relationships between postoperative anterior, lateral, and posterior acetabular coverage and joint survival; and prognostic factors for joint survival after transposition osteotomy of the acetabulum (TOA).

Aims

Approximately 10% to 20% of knee arthroplasty patients are not satisfied with the result, while a clear indication for revision surgery might not be present. Therapeutic options for these patients, who often lack adequate quadriceps strength, are limited. Therefore, the primary aim of this study was to evaluate the clinical effect of a novel rehabilitation protocol that combines low-load resistance training (LL-RT) with blood flow restriction (BFR).

Aims

Electromagnetic induction heating has demonstrated in vitro antibacterial efficacy over biofilms on metallic biomaterials, although no in vivo studies have been published. Assessment of side effects, including thermal necrosis of adjacent tissue, would determine transferability into clinical practice. Our goal was to assess bone necrosis and antibacterial efficacy of induction heating on biofilm-infected implants in an in vivo setting.

Aims

A recent study used the RAND Corporation at University of California, Los Angeles (RAND/UCLA) method to develop anatomical total shoulder arthroplasty (aTSA) appropriateness criteria. The purpose of our study was to determine how patient-reported outcome measures (PROMs) vary based on appropriateness.

Aims

Frailty has been gathering attention as a factor to predict surgical outcomes. However, the association of frailty with postoperative complications remains controversial in spinal metastases surgery. We therefore designed a prospective study to elucidate risk factors for postoperative complications with a focus on frailty.

Lisfranc injuries were previously described as fracture-dislocations of the tarsometatarsal joints. With advancements in modern imaging, subtle Lisfranc injuries are now more frequently recognized, revealing that their true incidence is much higher than previously thought. Injury patterns can vary widely in severity and anatomy. Early diagnosis and treatment are essential to achieve good outcomes. The original classification systems were anatomy-based, and limited as tools for guiding treatment. The current review, using the best available evidence, instead introduces a stability-based classification system, with weightbearing radiographs and CT serving as key diagnostic tools. Stable injuries generally have good outcomes with nonoperative management, most reliably treated with immobilization and non-weightbearing for six weeks. Displaced or comminuted injuries require surgical intervention, with open reduction and internal fixation (ORIF) being the most common approach, with a consensus towards bridge plating. While ORIF generally achieves satisfactory results, its effectiveness can vary, particularly in high-energy injuries. Primary arthrodesis remains niche for the treatment of acute injuries, but may offer benefits such as lower rates of post-traumatic arthritis and hardware removal. Novel fixation techniques, including suture button fixation, aim to provide flexible stabilization, which theoretically could improve midfoot biomechanics and reduce complications. Early findings suggest promising functional outcomes, but further studies are required to validate this method compared with established techniques. Future research should focus on refining stability-based classification systems, validation of weightbearing CT, improving rehabilitation protocols, and optimizing surgical techniques for various injury patterns to ultimately enhance patient outcomes.

Cite this article: Bone Joint J 2024;106-B(12):1431–1442.

Aim. Periprosthetic joint infection (PJI) is one of the main reasons for revision surgery after primary unicompartmental knee arthroplasty (UKA), total knee arthroplasty (TKA) or total hip arthroplasty (THA). Currently the MSIS and EBJIS criteria sets are considered to be the gold standards in determining PJI. These criteria sets are complex and contain tests that are time-consuming and many are rather costly. Therefore, further research is indicated to find a simpler but equally reliable diagnostic test. In this study we evaluated the additional value of calprotectine measurement in synovial fluid in patients undergoing hip and knee (revision) arthroplasty following routine work-up. Method. In a retrospective cohort study, we analyzed 182 synovial fluid samples from 143 patients with suspected PJI after UKA, TKA, THA or revision arthroplasty. Twenty-six of those cases were classified as PJI according to the MSIS and EBJIS criteria. Subsequently, synovial calprotectin was determined, using a lateral flow assay and two cut-off thresholds of ≥14 mg/L and ≥50 mg/L. Sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) of synovial calprotectin was determined. Results. When applying the MSIS and EBJIS criteria and a calprotectin level ≥14 mg/L, synovial calprotectin revealed an area under the curve of 0.96 (95% CI 0.90-1.00), with 92.3% sensitivity and 100% specificity. The PPV and NPV were 100% and 92.9% respectively. When applying the MSIS and EBJIS criteria and a calprotectin level ≥ 50 mg/L, synovial calprotectin revealed an area under the curve of 0.94 (95% CI 0.87-1.00), with 88.5% sensitivity and 100% specificity. The PPV and NPV were 100% and 89.7% respectively. Conclusions. The value of calprotectin in synovial fluid gives valuable information with a single test result, resulting in high predictive value in the diagnosis of PJI after hip or knee arthroplasty and should seriously be considered as part of PJI diagnostics in an outpatient clinical setting. The high specificity can help rule in patients that are suspected of PJI. Therefor this test can be helpful in a preop diagnostic work-up to avoid unnecessary revisions in patients with well-placed and well-fixed arthroplasties with a suspected PJI. These conclusions are independent of which criteria set was used as a gold standard

Aims

Pain is the most frequent complaint associated with osteonecrosis of the femoral head (ONFH), but the factors contributing to such pain are poorly understood. This study explored diverse demographic, clinical, radiological, psychological, and neurophysiological factors for their potential contribution to pain in patients with ONFH.

Aim. Accurate diagnosis is key in correctly managing prosthetic joint infection(PJI). Shoulder PJI definition and diagnosis is challenging. Current PJI definitions, based overwhelmingly in hip/knee research, may not accurately diagnose shoulder PJI. Our aim is to compare the preoperative performance of two PJI definitions comparing it to definitive postoperative classification. Method. This is a retrospective study of patients who have undergone total shoulder revision surgery for infection between 2005 and 2022. Cases were classified using two different PJI definitions: a)the European Bone and Joint Infection Society (EBJIS) and; 2)the 2018 International Consensus Meeting(ICM) PJI specific shoulder definition. Preoperative classification was based on clinical features, inflammatory markers and synovial fluid leukocyte count and definitive classification also considered microbiology and histology results. Results. Preoperative and definitive PJI classification status of the 21 patients included were evaluated and is summarized in table 1. The shoulder specific 2018 ICM definition showed the highest agreement between preoperative and definitive classification (76.2%, k=0.153, p=0.006) compared to EBJIS (52.4%, k=0.205, p=0.006). In all cases, the classification was changed because of positive intraoperative microbiology (at least two identical isolates). Microbiology findings showed coagulase negative staphylococci, Staphyloccocus aureus and Cutibacterium acnes to be the most frequent. Four patients had polymicrobial infections. Conclusions. Both the EBJIS 2021 and 2018 ICM definitions have low accuracy in predicting shoulder PJI preoperatively. Clearly further studies with larger cohorts are in dire need focusing specifically on shoulder revision arthroplasty to improve on existing definitions. Caution is advised while extrapolating of criteria/thresholds recommended for hip/knee joints. For any tables or figures, please contact the authors directly

Aim. We prospectively evaluated four different microbiological tools for diagnostics of prosthetic joint infections (PJI), and assessed their impact on the categorization of infection according to EBJIS guidelines. We compared culture, in-house real-time mPCR for S. aureus, S. lugdunensis, S. hominis, S. epidermidis, S. capitis, S. haemolyticus, C. acnes (mPCR), broad-spectrum PCR (Molzym) with 16S rRNA V3-V4 amplicon Sanger sequencing (16S PCR), and 16S rRNA V3-V4 amplicon next-generation sequencing (16S NGS) on MiSeq (Ilumina). Methods. A total of 341 samples (sonication fluid, tissue biopsy, synovial fluid) were collected from 32 patients with suspected PJI who underwent 56 revision surgeries at the Orthopaedic Centre University Hospital Ljubljana, between 2022 and 2024. Samples were processed using standard protocols for routine culture, followed by DNA isolation using the MagnaPure24 (Roche). All samples were tested with mPCR, and an additional ≥4 samples from each revision (244 in total) were subjected to further metagenomic analysis. Culture results were considered positive if the same microorganism was detected in ≥2 samples, ≥50 CFU/ml were present in the sonication fluid, or ≥1 sample was positive for a more virulent microorganism or if the patient had received antibiotic treatment. Results. Each tool demonstrated high sensitivity for correct EBJIS categorization (100% culture and 16S NGS, 96.88% mPCR and 16S PCR). The highest specificity was observed with mPCR and 16S PCR (87.5%), while culture (79.17%) and NGS (37.5%) showed lower specificity. In 27% (15/56) of revisions, all microbiological tests were negative, although infection was confirmed with histology in one case, and four cases were classified as infection-likely based on clinical signs. In 20% (11/56) of cases, all microbiological tests were positive; in three cases a combination of other EBJIS criteria (without microbiology) categorized the episodes as infection-likely and one as infection-unlikely, emphasizing the importance of microbiological tests in diagnostic criteria. In 43% (24/56) of revisions categorized as infection-unlikely using a combination of other EBJIS criteria, five had positive culture, and three had positive mPCR and 16S PCR. Fifteen (62%) had positive 16S NGS, 12 due to a low number of reads, which may indicate low-grade infection or possible contamination. Conclusion. To date, no test can be established as the ultimate gold standard. The lack of interpretation criteria can result in low specificity of some methods, as the threshold is difficult to determine. A multidisciplinary approach with combination of microbiological tools is still considered the most efficient

Aim. Swedish guidelines on antibiotic prophylaxis in arthroplasty surgery recommend cloxacillin in fixed doses that pay little attention to the patient's renal function and weight. Nevertheless, there are no studies on whether the resulting free prophylactic cloxacillin in vivo concentrations are optimal. We aimed to evaluate whether the current recommended prophylactic dosage of cloxacillin is adequate. Method. We performed a prospective two-centre study, measuring the free (active) cloxacillin concentrations in plasma throughout surgery, in patients subject to primary hip and knee prosthetic joint replacements, aiming at 100 patients per centre. To account for plasma-bone exposure differences, concentrations were considered adequate if twice the epidemiological cut-off value for cloxacillin concerning wild type Staphylococcus aureus whereas two-three times were labelled threshold values. The two enrolling hospitals are acute care hospitals in central Sweden, also performing 600 - 1200 primary hip and knee joint arthroplasties annually. All patients scheduled for elective primary hip or knee replacements from January 2022 to April 2024 were eligible for participation. Exclusion criteria were allergy towards penicillins, cognitive disorders leading to inability to sign informed consent, and an absence of interpreter in case of a patient not speaking Swedish or English. Results. We present results from the first 49 patients included. Four patients had free cloxacillin concentrations below cut-off (8.2%). These four cases had prolonged surgeries of 77-100 minutes. An additional 5/49 (10.2%) had threshold values. Conversely 5/49 (10.2%) cases had concentrations exceeding 15 times the needed. No cases with threshold or low cloxacillin concentrations were attributable to a lack of concerning timing and dosing of cloxacillin. All concentrations were above or equal to our cut-off at the start of surgery. Eighteen percent of patients were of normal of weight (BMI 18.5- 25). Of the rest 4% were morbidly obese (BMI >40), 41% obese (BMI 30-40) and 37% overweight (BMI 25-30). Twenty seven percent (43/159) had diabetes and 45% suffered cardiac disease. Conclusions. Some patients in our cohort had insufficient active cloxacillin levels at the end of prosthetic joint surgery. Previous studies indicate that insufficient prophylactic antibiotic concentrations might lead to an enhanced risk of prosthetic joint infections. Other patients were massively overdosed, leading to unnecessary ecological effects and potentially adverse reactions. As inadequate cloxacillin concentrations were not associated with a lack of compliance to current guidelines a change in practise might be needed. Our final results may help to determine how dosing should be adjusted

Aim. To date, no ultimate diagnostic gold standard for prosthetic joint infections (PJI) has been established. In recent years, next generation sequencing (NGS) has emerged as a promising new tool, especially in culture-negative samples. In this prospective study, we performed metagenomic analysis using 16S rRNA V3-V4 amplicon NGS in samples from patients with suspected PJI. Methods. A total of 257 (187 culture-negative (CN) and 70 culture-positive (CP)) prospectively collected tissues and sonication fluid from 32 patients (56 revisions) were included. 16S rRNA V3-V4 amplicons were sequenced using Illumina's MiSeq (California, USA) followed by bioinformatic analysis using nf-core/ampliseq pipeline. Results. We successfully sequenced 255 samples and detected a total of 105 microorganisms. These were mainly environmental microorganisms present in a small number of reads (≤100), indicating possible contamination. Pseudomonas spp. (non-aeruginosa species) was detected most frequently in 73% (187/255) of samples. The test showed limitations in species classification and identified microorganisms mainly at genus level. Significant differences in the number of reads were observed when comparing CN (≤100) and CP (≥1000) samples. In two CP, no bacteria were identified with sequencing, which is probably due to low bacterial load (1 CFU. Haemophilus spp. was detected with a significant number of reads (≥10000) in five samples from a single patient, in whom infection was considered likely according to EBJIS criteria, changing it to confirmed infection. Staphylococcus spp. was identified with ≥10000 reads in two CNs from an individual who was receiving antibiotic treatment at the time, had clinical signs of infection, and had a confirmed infection with S. lugdunensis one month earlier. Cutibacterium spp. with 36% (93/257) and Staphylococcus spp. with 34% (87/257) were detected with a minimal number of reads (≤100) in several CN, indicating possible contamination with normal skin microbiota. In one patient, Facklamia spp., an opportunistic pathogen, was detected in two samples by sequencing, but not by culture. Conclusions. We consider 16S rRNA V3-V4 amplicon sequencing to be a promising tool; however, further studies are needed to clarify uncertainties regarding the interpretation of the results in combination with other criteria. Using this method, we were able to successfully confirm infection in two patients whose microbiological results were initially negative, leading to a change from likely to confirmed infection in one case. The thresholds and interpretation of the results are currently unclear, therefore the method is being used experimentally rather than diagnostically at the time of writing

Aims

The Bankart and Latarjet procedures are two of the most common surgical techniques to treat anterior shoulder instability with satisfactory clinical and functional outcomes. However, the outcomes in the adolescent population remain unclear, and there is no information regarding the arthroscopic Latarjet in this population. The purpose of this study was to evaluate the outcomes of the arthroscopic Bankart and arthroscopic Latarjet procedures in the management of anterior shoulder instability in adolescents.

Introduction. Patient-specific biomechanical modeling using Finite Element Analysis (FEA) is pivotal for understanding the structural health of bones, optimizing surgical procedures, assessing outcomes, and validating medical devices, aligning with guidance issued by standards and regulatory bodies. Accurate mapping of image-to-mesh-material is crucial given bone's heterogeneous composition. This study aims to rigorously assess mesh convergence and evaluate the sensitivity of material grouping strategies in quantifying bone strength. Method. Subject-specific geometry and nonlinear material properties were derived from computed tomography (CT) scan data of one cadaveric human vertebral body. Linear tetrahedral elements with varying edge lengths between 2mm and 0.9mm were then generated to study the mesh convergence. To compare the effectiveness of different grouping strategies, three approaches were used: Modulus Gaping (a user-defined absolute threshold of Young's modulus ranging from 500 MPa to 1 MPa), Percentual Thresholding (relative parameter thresholds ranging from 50% to 1%), and Adaptive clustering (unsupervised k-means-based clustering ranging from 10 to 200 clusters). Adaptive clustering enables a constant number of unique material properties in cross-specimen studies, improving the validity of results. Result. Mesh convergence was evaluated via fracture load and reached at a 1mm mesh size across grouping strategies. All strategies exhibit minimal deviation (within 5%) from individually assigned material parameters, except Modulus Gaping, with a 500 MPa threshold (32% difference). Computational efficiency, measured by runtime, significantly improved with grouping strategies, reducing computational cost by 82 to 94% and unique material count by up to 99%. Conclusion. Different grouping strategies offer comparable mesh convergence, highlighting their potential to reduce computational complexity while maintaining accuracy in the biomechanical modeling of bones and suggesting a more efficient approach than individual element materials. The higher efficiency of FEA may increase its applicability in clinical settings with limited computational resources. Further studies are needed to refine grouping parameters and assess their suitability across different subjects

Aims

The aim of this study was to compare patient-reported outcomes (PROMs) following isolated anterior cruciate ligament reconstruction (ACLR), with those following ACLR and concomitant meniscal resection or repair.

Aims

The mechanism by which synovial fluid (SF) kills bacteria has not yet been elucidated, and a better understanding is needed. We sought to analyze the antimicrobial properties of exogenous copper in human SF against Staphylococcus aureus.