Background. Chronic low back pain is strongly linked to degeneration of the intervertebral disc (IVD), which currently lacks any targeted treatments. This study explores NPgel, a biomaterial combined with notochordal cells (NC), developmental precursor cells, as a potential solution. NCs, known for anti-catabolic effects on IVD cells, present a promising avenue for regenerating damaged IVD tissue. Methods. Bovine IVDs underwent enzymatic degeneration before NPgel (+/- NC) injection. Degenerated bovine IVDs were cultured under biomechanical loading for 21 days. Histology and immunohistochemistry assessed NC survival, phenotype, and matrix production. Within an in vivo sheep pilot study, NPgel (+/- NC) was injected into degenerated IVDs, blood was taken, and immune cell activation was monitored via flow cytometry over three months post-injection. Results. Within the ex vivo model, IVDs injected with NPgel (+/- NC) exhibited increased matrix expression and deposition. Viable NCs were detected post-culture, indicating survival and matrix production. In the in vivo model, NPgel injection into sheep IVDs did not significantly increase activation of immune cells compared to controls, suggesting no systemic inflammatory effects. Conclusion. NPgel, combined with NCs, shows promise for IVD regeneration. Ex vivo findings indicate NPgel supports NC survival and matrix production. Moreover, in vivo results demonstrate the absence of systemic immunogenic responses post-NPgel injection. This suggests NPgel's potential as a carrier for NCs in IVD regeneration therapy. These findings underscore NPgel's candidacy for further investigation in addressing chronic low back pain associated with IVD degeneration. Subsequent research, including long-term efficacy and safety evaluations, is imperative for clinical translation. Conflicts of interest. There are no conflicts of interest. Sources of funding. iPSpine, grant # 825925, Horizon 2020

Orthopedic device-related bone infection is one of the most distressing complications of the surgical fixation of fractures. Despite best practice in medical and surgical interventions, the rate of infection remains stubbornly persistent, and current estimates indicate that treatment failure rates are also significant. As we approach the limit of the effectiveness of current anti-infective preventative and therapeutic strategies, novel approaches to infection management assume great importance. This presentation will describe our efforts to develop and test various hydrogels to serve as customized antibiotic delivery vehicles for infection prevention and treatment. Hydrogels offer solutions for many of the challenges faced by complex trauma wounds as they are not restricted spatially within a poorly defined surgical field, they often degrade rapidly with no compatibility issues, and releases 100% of the loaded antibiotic. The preliminary data set proving efficacy in preventing and treating infection in both rabbit and sheep studies will be described, including local antibiotic concentrations in the intramedullary canal over time, compared to that of the more conventional antibiotic loaded bone cement. These two technologies show potential for the prevention and treatment of infection in trauma patients, with a clear focus on optimized antibiotic delivery tailored for complex wounds

Recent clinical data suggest improvement in the fixation of tibia trays for total knee arthroplasty when the trays are additive manufactured with highly porous bone ingrowth structures. Currently, press-fit TKA is less common than press-fit THA. This is partly because the loads on the relatively flat, porous, bony apposition area of a tibial tray are more demanding than those same porous materials surrounding a hip stem. Even the most advanced additive manufactured (AM) highly porous structures have bone ingrowth limitations clinically as aseptic loosening still remains more common in press-fit TKA vs. THA implants. Osseointegration and antibacterial properties have been shown in vitro and in vivo to improve when implants have modified surfaces that have biomimetic nanostructures designed to mimic and interact with biological structures on the nano-scale. Pre-clinical evaluations show that TiO. 2. nanotubes (TNT), produced by anodization, on Ti6Al4V surfaces positively enhance the rate at which osseointegration occurs and TNT nano-texturization enhances the antibacterial properties of the implant surface. 2. In this in vivo sheep study, identical Direct Metal laser Sintered (DMLS) highly porous Ti6Al4V specimens with and without TNT surface treatment are compared to sintered bead specimens with plasma sprayed hydroxyapatite-coated surface treatment. Identical DMLS specimens made from CoCrMo were also implanted in sheep tibia bi-cortically (3 per tibia) and in the cancellous bone of the distal femur and proximal tibia (1 per site). Animals were injected with fluorochrome labels at weeks 1, 2 and 3 after surgery to assess the rate of bone integration. The cortical specimens were mechanically tested and processed for PMMA histology and histomorphometry after 4 or 12 weeks. The cancellous samples were also processed for PMMA histology and histomorphometry. The three types of bone labels were visualized under UV light to examine the rate of new bony integration. At 4 weeks, a 42% increase in average pull-out shear strength between nanotube treated specimens and non-nanotube treated specimens was shown. A 21% increase in average pull-out shear strength between nanotube treated specimens and hydroxyapatite-coated specimens was shown. At 12 weeks, all specimens had statistically similar pull-out values. Bone labels demonstrated new bone formation into the porous domains on the materials as early as 2 weeks. A separate in vivo study on 8 rabbits infected with methicillin-resistant Staphylococcus aureus showed bacterial colonization reduction on the surface of the implants treated with TNT. In vitro and in vivo evidence suggests that nanoscale surfaces have an antibacterial effect due to surface energy changes that reduce the ability of bacteria to adhere. These in vivo studies show that TNT on highly porous AM specimens made from Ti6Al4V enhances new bone integration and also reduce microbial attachment

Objectives

We sought to determine if a durable bilayer implant composed of trabecular metal with autologous periosteum on top would be suitable to reconstitute large osteochondral defects. This design would allow for secure implant fixation, subsequent integration and remodeling.

Aim

Cementless prosthesis is one of the major bone-implant interface fixation methods in total joint replacement. Grit blasted surface, hydroxyapatite coated surface and plasma sprayed metallic porous coating have been popularly used. The latter has demonstrated higher bone implant mechanical stability in previous laboratory study in early and middle stages. However, question remains what the mechanism is to make it performing better and how to improve them further. This study is designed to examine the mode of failure in bone-implant interface in a sheep model.

Objectives

Osteochondral injuries, if not treated adequately, often lead to severe osteoarthritis. Possible treatment options include refixation of the fragment or replacement therapies such as Pridie drilling, microfracture or osteochondral grafts, all of which have certain disadvantages. Only refixation of the fragment can produce a smooth and resilient joint surface. The aim of this study was the evaluation of an ultrasound-activated bioresorbable pin for the refixation of osteochondral fragments under physiological conditions.

Thermal damage to bone related to the exothermic polymerisation of bone cement (PMMA) remains a concern. A series of studies were conducted to examine PMMA bone interface during cemented arthroplasty. In vitro and in vivo temperature distributions were performed in the laboratory and human and animal surgery. In vivo (10 patients) measurements of cement temperature during cementing of BHR femoral prosthesis using thermocouples. Intra-operative measurement of cement temperature in BHR in the presence of femoral head cysts was examined in patients. The BHR femoral heads were sectioned to assess cement mantle as well as position of thermocouples. An additional study was performed in sheep with PMMA implanted into cancellous defects. Thermocouples were used to monitor temperature in the cement as well as adjacent bone. Histology and CT was used to assess any thermal damage. The exothermic reaction of PMMA during polymerization does indeed result in an increase in temperature at the interface with bone. The in vivo study recorded a maximum temperature of 49.12C for approximately three minutes in the cancellous bone underneath the BHR prosthesis. This exposure is probably not sufficient to cause significant injury to the femoral head. The maximum temperature of the cement on the surface of the bone was 54.12C, whereas the maximum recorded in the cement in the mixing bowl was 110.2C. In the presence of artificial cysts within the bone, however, temperatures generated within the larger cysts, and even at the bone-cement interface of these cysts, reached levels greater than those previously shown to be harmful to bone. This occurred in one case even in the 1 cc cyst. Routine histology revealed a fibrous layer at the cement bone interface in the sheep study. Fluorescent microscopy demonstrated bone label uptake adjacent to the defect site. Histology did not reveal thermal necrosis in the defects in terms of bony necrosis. CT data was used to measure the amount of PMMA placed into each defect. This analysis revealed a range of volumes that did not seem to influence the histology. The heat of cement polymerisation in resurfacing as performed in our study is not sufficient to cause necrosis. This may reflect the ability of the body to rapidly conduct heat away by acting as a heat sink. The temperature-conducting properties of the metal prosthesis are also likely to be important

Purpose: Recent advances in arthroscopic shoulder surgery has expanded the options available to surgeons repairing rotator cuff tears. There are now a variety of suture techniques that arthroscopists can use to fix tears but limited data on which might work best, particularly for double row techniques. The objective of this study was to compare the initial cyclic loading and load to failure properties of two arthroscopic double row fixation with that of the open double row technique. Method: Thirty sheep shoulders were harvested and the infraspinatus tendons dissected free from all surrounding muscles and osseous attachments. Three double row stitch configurations (arthroscopic standard, arthroscopic mason-allen, open mason-allen) were performed and tested. The shoulders were then secured in a material testings machine and cyclically loaded between 5 and 100 N at 0.20 Hz for 10 cycles and then loaded to failure under displacement control at 1 mm/sec. Stiffness and ultimate load were measured and compared. The failure type, either through suture or anchor pull out, was also recorded. Results: None of the specimens failed under cyclic loading. The ultimate load to failure was significantly higher for the open double row and the arthroscopic mason-allen compared to the standard double row technique. No significant differences in stiffness were found among the stitches. All failures occurred at the suture-tendon junction. Conclusion: In this in vitro cadaver sheep study, the arthroscopic mason-allen and open mason-allen techniques had a significantly higher ultimate load to failure than the standard double row technique. Stitching methods that strengthen the tendon-suture interface can improve the strength of double row rotator cuff repairs

The aim of this study was to determine the function of the meniscofemoral ligament in the cranio-caudal and rotatory laxity of the ovine stifle.

Twenty fresh cadaveric ovine stifles were harvested from fully mature sheep, average weight 25kg. The joint was denuded of its muscular attachments leaving the capsule, including the patella and patellar tendon undisturbed. The femur and tibia were divided 10 cm from the joint line, positioned in cylindrical pots, and secured in polymethylmethacrylate bone cement. The stifles were tested in a four-degree-of-freedom rig positioned in an Instron materials testing machine. This allowed unconstrained coupled tibial rotations and translations during application of cranial (anterior) and caudal (posterior) draw forces. Forces up to a maximum of 100Nm were applied in the anterior and posterior directions, and the resultant translations were measured. These parameters were assessed at 30, 60, 90, and 110 degrees of flexion in ten intact stifles. Similar measurements were carried out after division of the caudal (posterior) cruciate ligament, followed by division of the meniscofemoral ligament. The sequence of division was reversed for a further ten stifles.

Division of the meniscofemoral ligament resulted in an 18–38% increase in posterior translation at all angles of flexion, both in the intact and in the caudal cruciate ligament-deficient stifle (p< 0.05). There was no significant increase in anterior translation. This effect was largest with the joint relatively extended (at 30°). Division of the meniscofemoral ligament also resulted in a 5–32% increase in internal rotation of the tibia after application of a 6Nm torque in the caudal cruciate-deficient knee. This was significant at 30° and 110° flexion (p< 0.05).

The meniscofemoral ligament is a significant secondary restraint in resisting the posterior draw and internal tibial rotation in the sheep stifle joint. This is the first study demonstrating a functional role for this structure in any animal. Its counterpart in the human is the posterior meniscofemoral ligament of Wrisberg. Several studies have demonstrated similarities between the sheep stifle and the human knee. Confirmation of a similar role for the ligament of Wrisberg in the human knee would have a significant bearing on the prognosis and management of the posterior cruciate ligament injured knee.