Aims

Metal and ceramic humeral head bearing surfaces are available choices in anatomical shoulder arthroplasties. Wear studies have shown superior performance of ceramic heads, however comparison of clinical outcomes according to bearing surface in total shoulder arthroplasty (TSA) and hemiarthroplasty (HA) is limited. This study aimed to compare the rates of revision and reoperation following metal and ceramic humeral head TSA and HA using data from the National Joint Registry (NJR), which collects data from England, Wales, Northern Ireland, Isle of Man and the States of Guernsey.

Aims

The aim of this study was to assess the quality and scope of the current cost-effectiveness analysis (CEA) literature in the field of hand and upper limb orthopaedic surgery.

The modern humeral head resurfacing was developed by Stephen Copeland, M.D. and introduced in 1986 as an alternative to stemmed humeral implants. At the time, first and second generation monoblock and modular stems with non-offset humeral heads posed many challenges to the surgeon to recreate the pre-morbid humeral head anatomy during anatomic TSA. The consequences of non-anatomic humeral head replacement were poor range of motion, increased native glenoid or glenoid component wear and premature rotator cuff failure. Additionally, the early generation humeral stems were very difficult to extract when revision was needed. The original stemless devices were cup resurfacing implants that were designed based on the early hip experience. The Copeland resurfacing device offered the ability to better match native humeral head anatomy and was considered less invasive and easier to revise. Glenoid exposure required more extensive dissection but TSA could be successfully completed. Clinical results for motion, function and outcome scores are similar to stemmed implants. The survivorship of the implants is also on par with other available implants and loosening has not been an issue. Stress shielding is not reported. Multiple manufacturers offered similar products all designed to try to predictably recreate the pre-morbid anatomy and to make insertion easier. Critical review of resurfacing arthroplasty radiographs has raised concern about the challenges of placing the implant with proper sizing and position. Most surgeons have implanted resurfacing implants as hemiarthroplasties. The development of anatomic TSA implants has allowed surgeons to better recreate the normal pre-morbid anatomy of the humerus. Newer stem designs are convertible or easily removable. This counters many of the original design benefits of resurfacing. The primary reason for revision of resurfacing implants is malposition followed by glenoid arthrosis and rotator cuff failure. Revision surgery after resurfacing has had mixed results. Stemless implants were introduced in Europe 13 years ago. Stemless devices share the benefits of resurfacing as minimally invasive and easier to revise. The added benefit of better glenoid access allows the surgeon to implant a glenoid. Most available implants have minimal follow-up. Mid-term follow-up of one design has demonstrated good fixation and loosening is uncommon. No studies are available that critically evaluate the surgeon's ability to recreate normal pre-morbid anatomy, whether revision arthroplasty is bone preserving and if results of revision will improve

Aims

The PROximal Fracture of the Humerus Evaluation by Randomisation (PROFHER) randomised clinical trial compared the operative and non-operative treatment of adults with a displaced fracture of the proximal humerus involving the surgical neck. The aim of this study was to determine the long-term treatment effects beyond the two-year follow-up.

Hemi shoulder arthroplasty is a rather successful procedure although revision surgery due to secondary glenoid erosion is reported in more than 25%. The downside of common shoulder arthroplasty is that in a deltopectoral approach the subscapularis tendon needs to be detached for exposure of the humeral head. Refixation of subscapularis tendon is associated with a retear rate of 4%, furthermore with progressing fatty muscle infiltration and loss of function. In case of revision surgery a second subscapularis tendon detachment is even more associated with worse function. Thus, arthroscopic humeral head resurfacing is an expedient alternative for minimal invasive humeral head arthroplasty without compromising subscapularis function. The purpose of this study was to report first clinical and subjective results after arthroscopic-assisted resurfacing of the humeral head. For this prospective case series, 24 patients (7 females, 17 males; mean age 59 years, range 42–73 years) undergoing arthroscopic-assisted partial shoulder resurfacing with the partial eclipse prosthesis were included in the study. Clinical conditions and subjective assessments were evaluated before surgery and annually thereafter using the Constant score (CS), active range of motion (ROM), visual analog scale (VAS) for pain, and the American Shoulder and Elbow Surgeons scale (ASES). Radiological outcomes and major complications were monitored. The mean CS for all patients improved significantly from 51 points preoperatively to 83 points 12 months after surgery (p=0.005). Trends towards increasing ROMs were detected. Subjective scores significantly improved from baseline to the 1-year follow-up (VAS: from 6.4 to 2.5, p=0.010; ASES: from 47 to 76, p=0.026). The majority of patients (88%) stated that they would undergo the procedure again. Revisions were indicated in 17% due to progression of osteoarthritis. Arthroscopic-assisted partial humeral head resurfacing as a minimal invasive procedure with the advantages of bone stock preservation and intact subscapularis tendon allowed immediate postoperative active mobilization and provided significant improvements in subjective outcome. In case of revision surgery a primary situation was encountered with postoperative results comparable to primary arthroplasty

In the past century several shoulder reconstruction systems with different types of prostheses and fixation methods have been developed to improve shoulder arthroplasty, especially to cover a wide range of pathologies and revision situations. The aim of this prospective trial was to report clinical and radiological mid-term results of a stemless humeral head replacement with metaphyseal hollow screw fixation. A consecutive series of 147 shoulders in 138 patients (84 female, 54 male; mean age of 67 years, range 40–84) undergoing stemless humeral head arthroplasty were considered for this single-centre trial. We prospectively followed 120 shoulders (40 hemi- and 80 total-arthroplasties) for an average of five years or until a reoperation. Patient's clinical and functional outcome was evaluated according to the Constant score and active range of motions (ROM) was measured. Patient's satisfaction with the treatment was evaluated. Additionally, operating times and complications were recorded. Radiological assessment for radiolucencies or implant migration was performed. The mean Constant score significantly increased from 35 points preoperatively to 62 points at the last follow-up (p<0.001). All subcomponents (pain, daily activity, ROM, strength) of the Constant score were significantly (p<0.001) higher at follow-up. Active flexion improved from 90° to 150° (p<0.001), active abduction from 78° to 120° (p<0.001), and active external rotation from 20° to 40° (p<0.001) between preoperative and last clinical assessment. Furthermore, 54% of the patients were very satisfied, 34% satisfied, and 12% unsatisfied. Operating times of the new stemless prosthesis were significantly shorter compared to a stemmed prosthesis. Over the follow-up period, all humeral head components were radiological centred, changing radiolucencies were detected; however no implant loosening occurred. Revision surgery for implant loosening only occurred in the metal-backed glenoid component with hollow screw fixation; otherwise no complication due to implant loosening was detected. The promising five-year results suggest that the concept of this stemless humeral head replacement might be an expedient alternative to existing shoulder replacements. Anatomical cutting of the humeral head and hollow screw fixation allow a familiar access to the glenoid combined with a shaft independent, less complex bone-sparing surgery along with shorter operating times and favourable revision situation

Aims

A pragmatic multicentre randomised controlled trial (PROFHER) was conducted in United Kingdom National Health Service (NHS) hospitals to evaluate the clinical effectiveness and cost effectiveness of surgery compared with non-surgical treatment for displaced fractures of the proximal humerus involving the surgical neck in adults.

Hill-Sachs and reverse Hill-Sachs lesions come in different shapes and sizes, and their effect on “glenoid track” can vary. Small Hill-Sachs lesions that do not engage can be successfully treated with a Bankart repair alone done arthroscopically or open. Moderate, engaging, Hill-Sachs lesions can be treated either with the addition of remplissage to an arthroscopic Bankart or by adding the triple blocking effect of the Bristow-Latarjet procedure. Surface replacements vary in size from the small hemi-cap type of procedure to an entire humeral head replacement (HHR). These devices can be used as opposed to allograft replacement when the risk of post-reconstruction arthritis is high with the aforementioned more conventional treatment techniques. When 45% or more of the humeral head is involved with the lesion, or Outerbridge stage III and IV changes prevail, a HHR is preferred. An oval shaped HHR is the author's preference, and the long diameter can be used to provide coverage anteriorly or posteriorly and is particularly useful in large Hill-Sachs lesions associated with epilepsy

The Hill-Sachs lesion is a bony defect of the humeral head that occurs in association with anterior instability of the glenohumeral joint. Hill-Sachs lesions are common, with an incidence approaching nearly 100% in the setting of recurrent anterior glenohumeral instability. However, the indications for surgical management are very limited, with less than 10% of anterior instability patients considered for treatment of the Hill-Sachs lesion. Of utmost importance is addressing bone loss on the anterior-inferior glenoid, which is highly successful at preventing recurrence of instability even with humeral bone loss. In the rare situation where the Hill-Sachs lesion may continue to engage the glenoid, surgical management is indicated. Surgical strategies are variable, including debridement, arthroscopic remplissage, allograft transplantation, surface replacement, and arthroplasty. Given that the population with these defects is typically comprised of young and athletic patients, biologic solutions are most likely to be associated with decades of sustainable joint preservation, function, and stability. The first priority is maximizing the treatment of anterior instability on the glenoid side. Then, small lesions of less than 10% are ignored without consequence. Lesions involving 10–20% of the humeral head are treated with arthroscopic remplissage (defect filled with repair of capsule and infraspinatus). Lesions greater than 20% that extend beyond the glenoid tract are managed with fresh osteochondral allografts to biologically restore the humeral head. Lesions great than 40% are most commonly associated with advanced arthritis and deformity of the humeral articular surface and are therefore treated with a humeral head replacement. This treatment algorithm maximises our ability to stabilise and preserve the glenohumeral joint

The Hill-Sachs lesion is a bony defect of the humeral head that occurs in association with anterior instability of the glenohumeral joint. Hill-Sachs lesions are common, with an incidence approaching nearly 100% in the setting of recurrent anterior glenohumeral instability. However, the indications for surgical management are very limited, with less than 10% of anterior instability patients considered for treatment of the Hill-Sachs lesion. Of utmost importance is addressing bone loss on the anterior-inferior glenoid, which is highly successful at preventing recurrence of instability even with humeral bone loss. In the rare situation where the Hill-Sachs lesion may continue to engage the glenoid, surgical management is indicated. Surgical strategies are variable, including debridement, arthroscopic remplissage, allograft transplantation, surface replacement, and arthroplasty. Given that the population with these defects is typically comprised of young and athletic patients, biologic solutions are most likely to be associated with decades of sustainable joint preservation, function, and stability. The first priority is maximising the treatment of anterior instability on the glenoid side. Then, small lesions of less than 10% are ignored without consequence. Lesions involving 10–20% of the humeral head are treated with arthroscopic remplissage (defect filled with repair of capsule and infraspinatus). Lesions greater than 20% that extend beyond the glenoid tract are managed with fresh osteochondral allografts to biologically restore the humeral head. Lesions great than 40% are most commonly associated with advanced arthritis and deformity of the humeral articular surface and are therefore treated with a humeral head replacement. This treatment algorithm maximises our ability to stabilise and preserve the glenohumeral joint

Some surgeons are reluctant to perform a reverse total shoulder arthroplasty (RTSA) on both shoulders because of concerns regarding difficulty with activities of daily living post-operatively as a result of limited rotation of the shoulders. Nevertheless, we hypothesised that outcomes and patient satisfaction following bilateral RTSA would be comparable to those following unilateral RTSA. A single-surgeon RTSA registry was reviewed for patients who underwent bilateral staged RTSA with a minimum follow-up of two years. A unilateral RTSA matched control was selected for each shoulder in those patients undergoing bilateral procedures. The Constant–Murley score (CMS), American Shoulder and Elbow Surgeons (ASES) score, Subjective Shoulder Values (SSV), visual analogue scale (VAS) for pain, range of movement and strength were measured pre- and post-operatively. The mean CMS, ASES, SSV, VAS scores, strength and active forward elevation were significantly improved (all p < 0.01) following each operation in those undergoing bilateral procedures. The mean active external rotation (p = 0.63 and p = 0.19) and internal rotation (p = 0.77 and p = 0.24) were not significantly improved. The improvement in the mean ASES score after the first RTSA was greater than the improvement in its control group (p = 0.0039). The improvement in the mean CMS, ASES scores and active forward elevation was significantly less after the second RTSA than in its control group (p = 0.0244, p = 0.0183, and p = 0.0280, respectively). Pain relief and function significantly improved after each RTSA in those undergoing a bilateral procedure.

Bilateral RTSA is thus a reasonable form of treatment for patients with severe bilateral rotator cuff deficiency, although inferior results may be seen after the second procedure compared with the first.

Cite this article: Bone Joint J 2013;95-B:1232–8.

Instability after arthroplasty of the shoulder is difficult to correct surgically. Soft-tissue procedures and revision surgery using unconstrained anatomical components are associated with a high rate of failure. The purpose of this study was to determine the results of revision of an unstable anatomical shoulder arthroplasty to a reverse design prosthesis. Between 2004 and 2007, 33 unstable anatomical shoulder arthroplasties were revised to a reverse design. The mean age of the patients was 71 years (53 to 86) and their mean follow-up was 42 months (25 to 71). The mean time to revision was 26 months (4 to 164). Pain scores improved significantly (pre-operative visual analogue scale (VAS) of 7.2 (sd 1.6); most recent VAS 2.2 (sd 1.9); p = 0.001). There was a statistically significant increase in mean active forward elevation from 40.2° (sd 27.3) to 97.0° (sd 36.2) (p = 0.001). There was no significant difference in internal (p = 0.93) or external rotation (p = 0.40). Radiological findings included notching in five shoulders (15%) and heterotopic ossification of the inferior capsular region in three (9%). At the last follow-up 31 shoulders (94%) were stable. The remaining two shoulders dislocated at 2.5 weeks and three months post-operatively, respectively. According to the Neer rating system, there were 13 excellent (40%), ten satisfactory (30%) and ten unsatisfactory results (30%). Revision of hemiarthroplasty or anatomical total shoulder replacement for instability using a reverse design prosthesis gives good short-term results.

Cite this article: Bone Joint J 2013;95-B:668–72.

Various surgical treatment were reported on rheumatoid shoulder. However, there were no recommended surgeries in the Japanese 2. nd. basic published text of rheumatoid disease. We had performed total shoulder arthroplasty(TSA) and humeral head replacement (HHR) in patient with Rheumatoid shoulder from 1992. The aim of this study was to compare the outcome of humeral head replacement, 2. nd. generation TSA and 3. rd. generation TSA in patients followed more than 5 years with rheumatoid shoulder. Material & Method. From 1992–2007, we performed shoulder arthroplasty in 42 shoulders in 40 patients. Six cases were not able to follow due to die and lost. All 36 shoulders in 34 patients could be followed with x-ray examinations more than 5 years. Averaged follow-up period was 8.6 years (range 5–14.5). HHR with intact cuff performed in 10 shoulders, 2. nd. generation TSA with intact cuff in 10, 3. rd. generation TSA in intact cuff in 10 and HHR with muscle tendon transfer in 6 shoulders. The shoulder score of Japanese Orthopaedic Association)JOA score. Modified Neer classification, ROM, lucent lines in X-ray and complications were investigated. Results. In JOA score, 3. rd. generation TSA revealed highest score (84 points). Also, in Modified Neer classification, excellent results were obtained 50% of cases in 3. rd. generation TSA. On the other hand, HHR with muscle tendon transfer group has no cases of excellent results. In flexion & external rotation, 3. rd. generation TSA had achieved satisfactory results. In X-ray, all glenoid component had a lucent line around the keel type glenoid in 2. nd. generation TSA. However, only 1.6 points in Lazarus claasification revealed in peg type component in 3. rd. generation TSA. No nerve injuries and instability were found after surgery. However, two infections and two glenoid resurfacing need after surgery. Discussion. In this mid-term results, 3. rd. generation type of TSA system could get favorable results in RA shoulders with intact cuff. However, the treatment for rheumatoid shoulder cases which has masssive rotator cuff defect is still remained as difficult problem

Introduction. We performed humeral head replacement (HHR) with smaller head for closing the cuff defect in patients of cuff tear arthropathy (CTA). And also, if the cuff defect could not close by decreasing the head size, we add muscle tendon transfer such as latissimus dorsi transfer for posterosuperior defect and pectoralis major transfer for anterosuperior defect. Aim. The purpose of this study was to investigate clinical and functional outcomes of this procedure for CTA according to Hamada-Fukuda classification. Methods. 76 shoulders in 77 patients with CTA underwent HHR based on our strategy at average age of 74 years. Hamada-Fukuda classification was classified into five categories. There were 13 type 1, 24 type 2, 26 type 3, 9 type 4, 5 type 5. Clinical outcomes (JOA score) were evaluated at an average of 25 months. Results. The average Japanese Orthopaedic Association shoulder score all improved significantly. Forward elevation improved from 57° to 146.5° in type 1, 65.5° to 132.1° in type 2, 82° to 123.9° in type 3, 90.6° to 122.1° in type 4 and 91° to 130° in type 5. Improvement of External rotation 25° in type 1, 23.1° in type 2, 10.89°in type 3, 11.3° in type 4 and −7.3° in type 5. Internal rotation similarly improved between Hamada-Fukuda classification. Conclusion. In patients of type 1 and 2, our procedure could get a good ER recovery. However, in patients of type 3, 4, and 5, functional outcomes were partly inferior to type 1 and 2. Our procedure for type 1 and 2 CTA is one of useful methods

Introduction. In recently, Reverse shoulder arthroplasty (RSA) in patients with irreparable rotator cuff tear has been worldwidely performed. Many studies on RSA reported a good improvement in flexion of the sholulder, however, no improvement in external rotation (ER)and internal rotation motion (IR). Additionally, RSA has some risks to perform especially in younger patients, because high rates of complications such as deltoid stretching and loosening, infection, neurologic injury, dislocation, acromial fracture, and breakage of the prosthesis after long-term use were reported. Favard et al noted a 72% survival with a Constant-Murley score of <30 at 10 years with a marked break occurring at 8 years. Boileau et al noted caution is required, as such patients are often younger, and informed consent must obviously cover the high complication rate in this group, as well as the unknown longer-term outcome. Its use should be limited to elderly patients, arguably those aged over 70 years, with poor function and severe pain related to cuff deficiency. We developed a novel strategy in 2001, in which we used the humeral head to close the cuff defect and move the center of rotation medially and distally to increase the lever arm of the deltoid muscle. Aim. The aim of this study was to investigate clinical outcome of our strategy for younger patients with an irreparable rotator cuff tear. Materials and Methods. Eighteen shoulders (9 of male patients, 9 of female patients) of patients under 70 years old with an irreparable cuff tears and who were treated with Humeral Head Replacement (HHR) and cuff reconstruction were followed up for more than 12 months. The average age was 63.9 years (range, 58–69 years). The average follow-up period was 27.3 months (range, 12–76 months). The cuff defect was successfully closed in 8 shoulders, whereas 8 shoulders required a Latissimus Dorsi transfer; one other shoulder required a Pectralis Major transfer, and one required both Latissimus dorsi and pectoralis major transfers. Range of motion (flexion, ER), the shoulder score of Japanese Orthopaedic Association (JOA score), and complications were evaluated. Results. Shoulder pain decreased in all patients after surgery. JOA score was improved from 41.1 to 82.6 points after surgery, Flexion motion improved from 72.5 to 145.6 degrees postoperatively and ER increased from 17.5 to 37.8 degrees postoperatively. There were no complications. Conclusion. In our study, HHR using the small head of the humerus and cuff reconstruction for patients under 70 years old with an irreparable rotator cuff tear yielded favorable results as compared to RSA, especially in terms of the ER Furthermore, the advantages of our strategy is able to keep bone stock of the glenoid after surgery. If revision surgery is required, RSA can be performed. Since the patients included in our study were relatively active, long-term follow-up will be required to assess their progress

The December 2012 Shoulder & Elbow Roundup³⁶⁰ looks at: whether allograft is biomechanically superior in large Hill-Sachs defects; glenoid bone loss in shoulder dislocators; repairing irreparable cuff tears; acromioclavicular joint injuries; whether more radiographs equals more surgery; whether reverse TSR is cheaper than hemiarthroplasty; autologous chondrocyte implantation in the shoulder; and fracture of the clavicle.

The October 2012 Shoulder & Elbow Roundup. 360. looks at: fast-absorbing suture anchors for use in shoulder labral tears; double-row rotator cuff repair; degenerate massive rotator cuff tears addressed with partial repair; open and arthroscopic stabilisation of Bankart lesions; predicting the risk of revision humeral head replacement; arthroscopic treatment for frozen shoulder; and long-term follow-up of the Bristow-Latarjet procedure

There is little information about the management of peri-prosthetic fracture of the humerus after total shoulder replacement (TSR). This is a retrospective review of 22 patients who underwent a revision of their original shoulder replacement for peri-prosthetic fracture of the humerus with bone loss and/or loose components. There were 20 women and two men with a mean age of 75 years (61 to 90) and a mean follow-up 42 months (12 to 91): 16 of these had undergone a previous revision TSR. Of the 22 patients, 12 were treated with a long-stemmed humeral component that bypassed the fracture. All their fractures united after a mean of 27 weeks (13 to 94). Eight patients underwent resection of the proximal humerus with endoprosthetic replacement to the level of the fracture. Two patients were managed with a clam-shell prosthesis that retained the original components. The mean Oxford shoulder score (OSS) of the original TSRs before peri-prosthetic fracture was 33 (14 to 48). The mean OSS after revision for fracture was 25 (9 to 31). Kaplan-Meier survival using re-intervention for any reason as the endpoint was 91% (95% confidence interval (CI) 68 to 98) and 60% (95% CI 30 to 80) at one and five years, respectively.

There were two revisions for dislocation of the humeral head, one open reduction for modular humeral component dissociation, one internal fixation for nonunion, one trimming of a prominent screw and one re-cementation for aseptic loosening complicated by infection, ultimately requiring excision arthroplasty. Two patients sustained nerve palsies.

Revision TSR after a peri-prosthetic humeral fracture associated with bone loss and/or loose components is a salvage procedure that can provide a stable platform for elbow and hand function. Good rates of union can be achieved using a stem that bypasses the fracture. There is a high rate of complications and function is not as good as with the original replacement.

In recently, reverse shoulder arthroplasty for rotator cuff deficient arthritis is widely used in the world. However, a high complication rate was reported and worried about long-term results after reverse shoulder arthroplasty. From 2001, we performed a novel strategy for these cases such as rotator cuff reconstruction w/ or w/o muscle transfer and a humeral head replacement with using smallest head to decrease joint volume. The aim of this study was to investigate with clinical outcomes after this surgery more than two years follow-up. Materials & methods. Fifty six shoulders underwent humeral head replacement (HHR) with or without tendon transfer for cuff tear arthropathy was able to follow-up more than two years. The mean age was 74 years (60 to 83 years). 42 cuff tear arthropathy, 6 RA, 5 re-tear after cuff repair with arthritis, and 1 arthritis after infection were included. Coracoacromial arch preserved Superior approach with preserving coracoacromial arch was used for replacement the humeral stem and head. Almost of the cases could be repaired with using a smallest head because of the height of humeral head and joint volume were decreased. However, when rotator cuff remained in irreparable condition, a latissimus dorsi tendon or a pectoralis major tendon from same shoulder was transferred for cuff reconstruction. The patients were divided by 2 groups; 36 shoulders of HHR without tendon transfer and 20 shoulders of HHR with tendon transfer. Each patient was evaluated with Japan Orthopaedic Association score (JOA score) and modified Neer's limited goals rating scale after a least 2 year of follow-up. Results. In all cases, preoperative severe pain was dramatically improved. JOA score improve from 40.2 preoperatively to 80.2 postoperatively. Twelve shoulders estimated as excellent in modified Neer's classification, 34 in satisfactory and 10 in unsatisfactory. Half of cases with RA were unsatisfactory results. Postoperative active flexion statistically improved compared to preoperative range of motion. Averaged postoperative flexion was 136 degrees (preop.;68.8) and postoperative external rotation was 28.6 degrees (preop.;13.2). However, there was no significant difference of external rotation in the HHR group between pre and postoperative evaluation. The radiographic evaluation showed four cases of glenoid erosion. One case had arthroscopic Suprascapular nerve release eight years after surgery. Conclusions. The current results were consistent with the prior studies. Our novel strategy is considered as one of useful procedure for cuff tear arthropathy. However, the case which classified with Seebauer type IIB should not be recommended

Purpose: The success of humeral head replacement following fracture is reliant on several factors, one of which is version. The correct humeral version (HV) is highly variable, and is patient and side dependent. In the setting of fracture, there is no intra-operative landmark to guide the surgeon as to the anatomic version. This study has examined computed tomography (CT) of the shoulder and compared the HV to the metaphyseal version (MV) to evaluate reliability in predicting the anatomic version. Method: A retrospective review of 50 shoulder CT scans was carried out. Patients were excluded if the anatomy prevented HV or MV evaluation. The HV and MV was measured by 2 independent evaluators. Inter and intra-rater reliability was performed. Results: There were 27 right and 23 left shoulder CT’s reviewed. The mean age of patients was 45.3 (range 13–85). The difference between the MV and HV was approximately 2.8 (95% CI 0.63–5.1). Inter and intra-rater reliability was 0.966 and 0.984, respectively. Conclusion: Determining the version of the humeral head in the setting of fracture is difficult and highly inaccurate. The biceps groove has been previously cited as a landmark for arthroplasty position, however, given the anatomic variability, version may be miscalculated. We have demonstrated the medial calcar of the proximal humerus is within 3 degrees of the actual humeral head version. This CT guided approach is novel, reproducible and demonstrates excellent reliability. It is both accurate and consistent and may be successfully utilized in the setting where normal anatomic landmarks are absent, such as fracture