Introduction

Proximal short stems have gained in popularity for perceived bone preservation but more recently, physiological loading. We report the medium term success of a calcar loading, short stem in a large cohort from a single unit with multiple surgeons.

The ODEP (Orthopaedic Data Evaluation Panel) rating system should offer a surgeon and patient extra information when making a choice on which implant to use. However, in the current economic environment, ratings may also influence implant choice by contracting bodies. Our aim was to determine the performance of commonly used Acetabular and femoral components in our unit and compare these to their published ODEP ratings (or absence of rating).

We analysed all of the following primary THR components (12,792) for revision for any reason, using same date ranges as ODEP where more than 100 implantations had occurred. Hip components: Trinity (3A in 2013), Trilogy (10A* in 2016), Atlas (10A in 2013), Trilogy TMT (10A 2010) Durom (not rated), BHR (10A, 2010), ACCIS (not rated); Femoral components: Taperfit (10A in 2013), Taperloc (10A* in 2016), Metafix (3A in 2013), CPT (10A in 2012), Ecofit (not Rated), ESOP (not rated), Minihip (3A 2013), Durom (not rated), BHR (10A 2010), ACCIS (not rated).

Analysis of Kaplan Meier survival curves was undertaken for all components. The rated components and non-rated components were compared using HR and logrank tests for all time groups when ratings were introduced. No statistical difference was observed in any group except for the Trinity cup which had a 98.2% (1344 cups) survival at 6 years.

Component survival in our unit was better than ODEP suggested failure for A category of not more than 1% per year, for all components.

Whilst we applaud the intention to improve data available for prostheses, the present ODEP system does not distinguish between performances of different implants in our unit. We therefore recommend care when relying upon ODEP ratings to make clinical or contracting decisions.

Press-fit fixation of uncemented acetabular components is increasingly being used for total hip replacement (THR) surgery. This study was aimed to analyse the survival of an established, un-cemented flexible metal backed cup with non-highly cross-linked polyethylene in primary and simple revision THR.

We assessed the outcome of 1703 consecutive cementless elastic acetabular cups (Atlas, FH France) with non-highly cross-linked polyethylene (GUR1030) in total hip replacement surgery. There were 1582 patients (513 males and 1079 females) with mean age of 74 years (36–97 years). Seventeen senior operating surgeons accounted for 88.5% of cases from a single arthroplasty unit. Survival analysis was calculated using the Kaplan Meier Estimator. At 184 months post surgery the survivorship was 92.4% (95% CI 88.3–94.7) with cup revision for any cause as an endpoint. Three patients died within first month of surgery and 268 patients (17.13%) died due to unrelated causes.

Overall, 59 patients had revisions (3.5%), Thirty eight patients (2.3%) were due to acetabular causes such as: aseptic loosening in 6 patients (0.35%); hip instability in 13 patients (0.76%); and deep infection in 11 patients (0.64%).

We believe the cementless elastic acetabular cup on in total hip replacement is tolerant of technique and patient variation and continues to give excellent long-term results and its continued widespread use can be recommended.

National Institute of Clinical Excellence (NICE) recommended total hip replacement (THR) surgery for fit patients with fracture neck of femur (NOF) in 2011. Our hospital implemented hip fracture program to follow these recommendations the same year. However, the increased incidence of further procedures compared with those undergoing the THR for osteoarthritis alone has led to concern regarding dislocation and other complications when using THR treatment for fracture NOF particularly with the posterior approach.

We introduced dual mobility implant for THR for hip fracture program patients to minimize risk of hip instability but allowing the use of the posterior approach which is recognised as giving a faster recovery than the Hardinge type approaches in this patient group. The Arthroplasty database for hip fracture program was reviewed from September 2011 to September 2015 for appropriateness of this treatment. During this period, 120 Dual Mobility THRs were carried out in 119 patients (36 males, 84 females) with mean age at 78 years (42–94) and average follow-up of 24 months (2–56 months). All patients were either operated by a fellowship trained arthoplasty surgeons or the senior surgeons using posterior approach. All patients undergoing THR for NOF were found to meet the NICE guidelines criteria for THR. No post-operative dislocation, infection, hetotropic ossification or lysis was recorded. Mean Harris Hip Score (HHS) at 19 months was 82 (54–98). In this cohort 112 patients (94.3%) were able to ambulate in non-trendlenburg gait pattern. One patient developed deep vein thrombosis in early post-operative period.

This study emphasises beneficial use the dual mobility implant combined with the posterior approach in THR for fracture NOF patients and highlights the areas of improvements in hip fracture management.

This study examined whether TiNbN surface characteristics can reduce corrosion and wear of Chrome Cobalt Molybdenum Metal-on Metal bearings.

Two series of patients had plasma concentrations of chromium and cobalt at intervals following surgery. The First Series comprised a retrospective analysis of 52 consecutive cases (49 patients, 73–96 months following operation; age at surgery: 33–78) who had undergone an ACCIS (Implantcast, Germany) Modular Large Head hip replacement. The Second Series comprised a prospective, consecutive series of 125 cases (109 patients, 1–61 months following operation; age at surgery: 24–75) who had undergone an ACCIS Resurfacing Hip Replacement in whom pre-operative samples and periodic post-operative metal ion analysis was obtained. Cup inclination and anteversion angles, patient outcome and Harris hip scores at last follow-up were also recorded.

The first series revealed medians for [Cr] of 1.2 (range <0.5–2.4) ug/l and [Co] of 3.3 (range <0.15–8.18) ug/l. Four patients were not available for measurement. The second series gave one year [Cr] of 0.8 (range <0.5–1.6) ug/l and [Co] of 0.2 (range <0.15–0.9) ug/l and at two years [Cr] of 0.2 (range <0.5–1.5) ug/l and [Co] of 0.8 (range <0.15–1.0) ug/l. There was no correlation with cup inclination (38° to 62°) or anteversion (0° to 32°) in either group. Mean Harris Hip Scores were 80.9 and 92.3 respectively.

Low median levels of metal ions were found in the First Series (despite differing stem type usage). The low median ion levels were more consistent in the Resurfacing patients of the Second Series. The Titanium Niobium Nitride Ceramic Surface Engineering Metal-on-Metal bearing implants appear to protect against raised plasma [Cr] and [Co] both over time and with outlying cup positions. The Harris Hip Scores suggest a good patient outcome for the hip replacements in both series. Further study by a randomised controlled prospective analysis is suggested.

The ACCIS system comprises a bearing of a 5 micron surface ceramic upon a Chrome Cobalt Molybdenum (CrCoMo) substrate which allows for a homogeneous couple. The Titanium Niobium Nitride (TiNbN) microceramic applied by Plasma Vapour Deposition. In comparison with CrCoMo alloy, TiNbN gives a hard (2800 vs 489V), smooth (0.23 vs 0.55Rz), low friction (0.079–0.1 vs 0.11–0.56mu pin on disk test), wetable surface which when combined allows for the potential of gaining fluid film lubrication (lambda>3) on a smaller head diameter than an untreated surface. These properties are postulated to reduce wear and hence lower the release of Cr and Co ions in vivo. The surface microceramic also prevents exposure to release of Cr and Co by corrosion. The surface modified implants were first used in 2003 in large head arthroplasty and later in 2005 with resurfacing implants. Two series of patients implanted by a single surgeon were examined to elucidate the metal ion release of the ACCIS system. The first series retrospectively examined 52 consecutive Large Head Arthroplasty cases for [Cr], [Co] and [Mo] levels. A mean follow-up time of 7.5 yrs (77–101mths) with 9 patients being lost to revision and death by the time of the study. Median levels of [Cr] 1.6, [Co] 4.76 and [Mo] 2.5 µg/l were obtained. The second series prospectively examined the [Cr] and [Co] levels with the pre-operative values as controls in 125 resurfacing cases with the ACCIS microceramic. The second series gave no rising trend observed at up to 5 years ([Cr & Co] (range < 0.5–1.6 µg/l). It is postulated that the ACCIS surface microceramic reduces wear and also reduces the effective patch size for a given load thus allowing for a greater Patch to Edge Distance allowing a greater tolerance to cup positioning. A RCT is currently underway.

Introduction: The articulating surfaces of a new metal-on-metal (MoM) hip prosthesis system were engineered with the ceramic Titanium-Niobium-Nitride (TiNbN) by Physical Vapor Deposition (PVD). The value of PVD technology rests in its ability to modify the surface properties of a device without changing the underlying material properties and biomechanical functionality. In addition to enhancing wear resistance, PVD coatings reduce friction and improve corrosion resistance and thus minimize metal ion release.

Purpose of the study: to investigate whether the elevation of the ion levels of chromium and cobalt, which is normally seen in the blood of patients after MoM hip arthroplasty, could be prevented by the use of the new MoM hip prosthesis with ceramic engineered articulating surfaces.

Materials and Methods: The ACCIS components are manufactured from casted hi-carbon Co-Cr-Mo alloy. Heat treatment reduces the block-carbides in number and size. The surfaces are polished and are micro-finished. Then the surfaces undergo TiNbN-ceramic surface engineering by PVD. The ACCIS prostheses for total hip- and resurfacing arthroplasty are manufactured by implantcast, Buxtehude, Germany.

200 ACCIS resurfacing hip prostheses were implanted in three centers: Morriston Hospital, Swansea, UK, Neville Hall Hospital, Abergavenny, UK and Arthro Clinic, Hamburg, Germany. Blood samples of 60 randomly selected patients were analyzed before surgery and at intervals of 3, 6, 12 and 24 months after surgery. Independent trace metal measurements were performed at the Universitätsklinikum Carl Gustav Carus Dresden, Germany.

Results: The Chromium concentrations were median 0,8215 (0,25–4,6) and the cobalt concentrations were median 1,34 (0,72–4,24)μ gr/L. None of the patients at any moment after operation showed significant increase of Cr and Co ions in the blood and ion levels above the normal limits as described in the Hand book for environmental medicine (1) were exceptional.

Discussion: The median concentrations of chromium and cobalt are significantly lower than levels published in the literature for other MoM metal prostheses. Because the ion level is believed to be a diagnostic tool to identify problems, the absence of an increase of the metal ion levels most probably demonstrates that wear of the metal surfaces can be only minimal (2).

Conclusion:

Surface engineering of metal articular surfaces effectively minimizes corrosion and metal ion release.

Background The magnitude of the medial offset and the limb length discrepancy after a total hip replacement (THR) significantly alters the biomechanics of the hip. If both these components are not properly restored, the rate of dislocation may increase. Further decreased offset may result in impingement at the extremes of movement, and also results in soft-tissue laxity, while increased offset increases stress within the stem that may lead to stem fracture or loosening. In addition to affecting the clinical outcome, limb length discrepancy may also cause legal problems.

Aim To find out whether intraoperative assessment and restoration of desired offset, and correction of limb length discrepancy actually corrects these two components as assessed by postoperative radiographs.

Material and Methods We evaluated 39 consecutive THRs in 37 patients who had the surgery performed via the posterior approach. Intraoperatively the medial offset was measured using a ruler from the tubercle in the trochanteric fossa to the centre of rotation of the head, and then check again after the seating of the femoral prosthesis. The size of the head was then accordingly altered. The limb length was measured using the ruler parallel from the lesser trochanter, and taking it upto the tip of the greater trochanter. The preoperative and the postoperative radiographs were evaluated for the medial offset and limb length discrepancy. The medial offset was calculated as a ratio in reference to the opposite side.

Results The median medial offset was 93.9 (85–100) preoperatively and 94.2 (85–110) postoperatively. The median limb length discrepancy was improved from a preoperative −4.84mm (0 to −30mm) to a postoperative −0.06mm (−9 to +16mm).

Discussion Preoperative templating may be a way of obtaining the correct medial offset and limb length in THRs. However, varus or valgus placement, and sinking or protrusion of the prosthesis may alter both these components significantly. Hence, intraoperative measurement and thus changing the components and the position of the stem accordingly may be the best method in addition to preoperative templating, in achieving the required offset and minimising limb length discrepancy in THRs.

The aim of our study was to assess the accuracy of the theatreman system for data retrieval and to identify possible causes of the inaccuracies found.

A retrospective analysis was undertaken in our orthopaedic and trauma theatres at Morriston Hospital, Swan-sea. We reviewed 110 operations carried out in the department over a six-week period.

The following sources were assessed: case notes, theatre logbooks, theatre coding sheets and data from the-atreman.

Our study identifies inaccuracies and problems in data collection and its retrieval. This problem has been already highlighted by other sources.

As the codes are such a source of inaccuracy, with modern high processing capacity computers, we believe accuracy could be vastly improved by using plain language data entry. This avoids manual conversion to codes and eliminates inte-operator discrepancies and reluctance for some complex code entry. For only 25% of the cases to be retrievable from the theatreman system shows that the whole system and not only the input of data are at fault. As a unit, if we used this information to represent our workload, we would significantly be underestimating our workload.

There is a need for a computer system that recognises words, has ease of data input, generates operation notes and perhaps linked into the patient’s notes. We acknowledge that electronic case notes may help to correct some of these problems but worry that a system introduced with accuracy of data retrieval similar to the theatreman system, is worthless.