Introduction

Traditionally, radiological union of fractures treated with an Ilizarov frame is confirmed by a period of dynamization - destabilisation of the frame for a period prior to removal. Reduced clinic availability during the COVID-19 pandemic caused a shift to selective dynamisation in our department, whereby lower risk patients had their frames removed on the same day as destabilisation. This study investigates the effects of this change in practice on outcomes and complication rates.

Aims

Iliopsoas impingement occurs in 4% to 30% of patients after undergoing total hip arthroplasty (THA). Despite a relatively high incidence, there are few attempts at modelling impingement between the iliopsoas and acetabular component, and no attempts at modelling this in a representative cohort of subjects. The purpose of this study was to develop a novel computational model for quantifying the impingement between the iliopsoas and acetabular component and validate its utility in a case-controlled investigation.

Abstract

Background

To improve patient pathways we have, in selected patients, begun to acutely apply circular (rather than temporary monolateral) fixators with simultaneous or subsequent soft tissue closure. We present early results.

Despite of the high success of TKA, 20% of recipients remain dissatisfied with their surgery. There is an increasing discordance in the literature on what is an optimal goal for component alignment. Furthermore, the unique patient specific anatomical characteristics will also play a role. The dynamic characteristic of a TKR is a product of the complex interaction between a patient's individual anatomical characteristics and the specific alignment of the components in that patient knee joint. These interactions can be better understood with computational models. Our objective was to characterise ligament characteristics by measuring knee joint laxity with functional radiograph and with the aid of a computational model and an optimisation study to estimate the subject specific free length of the ligaments.

Pre-operative CT and functional radiographs, varus and valgus stressed X-rays assessing the collateral ligaments, were captured for 10 patients. CT scan was segmented and 3D–2D pose estimation was performed against the radiographs. Patient specific tibio-femoral joint computational model was created. The model was virtually positioned to the functional radiograph positions to simulate the boundary conditions when the knee is stressed. The model was simulated to achieve static equilibrium. Optimisation was done on ligament free length and a scaling coefficient, flexion factor, to consider the ligaments wrapping behaviour.

Our findings show the generic values for reference strain differ significantly from reference strains calculated from the optimised ligament parameters, up to 35% as percentage strain. There was also a wide variation in the reference strain values between subjects and ligaments, with a range of 37% strain between subjects. Additionally, the knee laxity recorded clinically shows a large variation between patients and it appears to be divorced from coronal alignment measured in CT. This suggests the ligaments characteristics vary widely between subjects and non-functional imaging is insufficient to determine its characteristics. These large variations necessitate a subject-specific approach when creating knee computational models and functional radiographs may be a viable method to characterise patient specific ligaments.

We analysed the functional and psychological outcomes in children and adolescents with complex tibial fractures treated with the Ilizarov method at our frame unit.

An observational study with prospective data collection and retrospective analysis of clinical data was undertaken. Patients younger than 18 years and an open physis were included. The Ilizarov method (combined with percutaneous screw fixation in physeal injuries) was applied and immediate weightbearing recommended.

Sixty four patients (50 male, 14 female) aged between 4 and 17 years were admitted to our Major Trauma Centre from 2013 until 2016 (25 tertiary referrals). Thirty one (48%) patients were involved in road traffic accidents, 12 (19%) sustained injuries in full contact sports. The average weight was 51 kg (range 16–105 kg). Twenty three open tibial fractures (14 Gustilo 3A and 9 Gustilo 3B) and 15 associated physeal injuries were treated among a cohort of closed tibial fractures with significant displacement (10 failed conservative treatment prior to frame treatment).

We report a 100% union rate with a median hospital stay of 4 days (range 2–19) and a median frame time of 105 days (range 62–205 days). Malunions (> 5 degrees in any plane) were not observed. Three patients required bone transport. At the time of submission, 70% of patients and their parents reported functional outcomes using the Paediatric Quality of Life Inventory (PedsQL) at minimum six months post frame. The PedsQLTM 4.0 Generic Core Scales are comprised of parallel child self-report and parent proxy-report formats. Children's physical average scores were 79 out of 100 and average psychosocial scores were 80 out of 100 and for parent average physical scores were 78 out of 100 and the same for parent average psychosocial scores. These results suggest high levels of quality of life on the PedsQL. The median visual analogue health score (0–100) was 81 out of 100 (71–100), median Lysholm knee scores 98 (range 49–100) and median Olerud & Molander ankle scores 75 (range 40 – 100).

Regardless of age, weight and soft tissue damage and complexity of fracture pattern, the Ilizarov method has shown to be safe and effective treating tibial fractures in the paediatric and adolescent population admitted to our Major Trauma Centre. Furthermore, patients reported high physical and psychosocial functioning following treatment.

Level of evidence: IV (case series)

Introduction

Distal tibial fractures are notoriously difficult to treat and a lack of consensus remains on the best approach. This study examined clinical and functional outcomes in such patients treated definitively by circular external fixation (Ilizarov). Patients and Methods: Between July 2011 and May 2016, patients with fractures extending to within 1 muller square of the ankle were identified from our prospective Ilizarov database. Existing data was supplemented by review of clinical records. Fractures were classified according to the AO/OTA classification. Functional outcome data, including general measures of health related quality of life (SF-12 and Euroqol) and limb specific scores (Olerud and Molander Score and Lysholm scores) had been routinely collected for part of the study period. Patients in whom this had not been collected were asked to complete these by post. Adverse events were documented according to Paley's classification of: problems, obstacles and complications.

Introduction

Successful designs of total hip replacement need to be robust to surgery-related variability. Until recently, only simple parametric studies have explored the influence of surgical variability [1]. This study presents a systematic method for quantifying the effect of variability in positioning on the primary stability of femoral stems using finite element (FE) models.

Introduction

Pre-clinical testing of orthopaedic devices could be improved by comparing performance with established implants with known clinical histories. Corail and Summit (DePuy Synthes, Warsaw) are femoral stems with proven survivorship of 95.1% and 98.1% at 10 years [1], which makes them good candidates as benchmarks when evaluating new stem designs. Hence, the aim of this study was to establish benchmark data relating to the primary stability of Corail and Summit stems.

Introduction

Primary stability is essential for long-term performance of cementless femoral components. There is debate as to whether collars contribute to primary stability. The results from experimental studies and finite element (FE) analysis have been variable and contradictory. Subtle differences in performance are often swamped by variation between cadaveric specimens in vitro, whereas FE studies tend to be performed on a single femur. However, FE studies have the potential to make comparisons of implant designs within the same cohort of femurs, allowing for subtle performance differences to be identified if present. This study investigates the effect of a collar on primary stability of a femoral prosthesis across a representative cohort of femurs.

We sought to determine what dimensional changes occurred from wear testing of a total knee implant, as well as whether any changes developed within the polyethylene subsurface. Three fixed bearing implants underwent wear simulator testing to 6.1 million cycles. Gravimetric analysis and micro-CT scans were performed pre-test, mid-test, and post-test. Wear volume and surface deviations were greater during 0–3.2 million cycles (91±12 mm³) than from 3.2–6.1 million cycles (52±18 mm³). Deviations (wear and creep) occurred across all surfaces of the tibial inserts, including the articular surface, backside surface, sides, and locking mechanism. No subsurface changes were found. The micro-CT results were a useful adjunct to gravimetric analysis, better defining the dimensional changes that occurred with testing and ruling out subsurface fatigue.

Introduction:

Primary stability is crucial for long-term fixation of cementless tibial trays. Micromotion less than 50 μm is associated with stable bone ingrowth and greater than 150 μm causes the formation of fibrous tissue around the implant [1, 2]. Finite element (FE) analysis of complete activities of daily living (ADL's) have been used to assess primary stability, but these are computationally expensive. There is an increasing need to account for both patient and surgical variability when assessing the performance of total joint replacement. As a consequence, an implant should be evaluated over a spectrum of load cases. An alternative approach to running multiple FE models, is to perform a series of analyses and train a surrogate model which can then be used to predict micromotion in a fraction of the time. Surrogate models have been used to predict single metrics, such as peak micromotion. The aim of this work is to train a surrogate model capable of predicting micromotion over the entire bone-implant interface.

BACKGROUND:

Implant wear continues to be a limitation of total knee replacement (TKR). Wear simulator studies are a valuable screening tool in new implant development. The purpose of this study was to determine the ability of micro-CT to prospectively measure wear in TKR implants during a wear simulator trial.

The aim of this study was to perform a comprehensive evaluation of the changes in function from pre- to post-surgery in total and unilateral knee arthroplasty (UKA/TKA) patients. Twenty healthy (age 62.4 ±5.9, 11 male), 14 UKA (age 60.9 ±10.1, 8 male) and 17 TKA (age 67.2 ±8.1, 9 male) patients were studied. KA patients were assessed four weeks pre- and six months post-operation. Measures of perceived pain and function were collected using Oxford Knee Score (OKS) questionnaire. Tests of objective function included joint range of motion (RoM), ultrasound imaging, and 3-D motion analysis/inverse modelling from gait and sit-stand. An optimal set of variables was used to classify KA function using the Cardiff DST method. Pre-KA and healthy individuals were accurately classified (96%). Post-operation questionnaire measures of function improved for both UKA and TKA groups. However, observed measures of RoM, muscle atrophy and gait had only limited gains. This resulted in 57% of UKA and only 27% of TKA patients being classified as healthy post-operation. The results of this study show that 6 months post-surgery UKA patients had higher function than TKA. Using statistical approaches to combine functional assessments has provided an accurate platform to classify function and estimate changes from pre- to post-surgery. The clinical application of this tool requires further investigation and comparison to commonly used clinical techniques.

Post-operative regimes involving the use of intra-articular local anaesthetic infiltration may allow early mobilisation in patients undergoing total knee arthroplasty. Few studies have evaluated such regimes outside specialist arthroplasty units. We aimed to determine whether an enhanced recovery programme including the use of local anaesthetic administration could be adapted for use in a district general setting.

Following introduction of this regime to our unit, 100 consecutive patients undergoing primary total knee arthroplasty were reviewed. 56 patients underwent a standard analgesic regime involving a general or spinal anaesthetic and oral analgesics post operatively (group1). 48 patients underwent the newly introduced regime, which included pre-operative counselling, peri-articular local anaesthetic infiltration at operation and intra-articular local anaesthetic top-up administration post-operatively for 24 hours (group 2). Length of stay, post-operative analgesic requirements, and range of knee motion post-operatively were compared.

Median length of stay was less for patients in group 2 compared with those in group 1 (4 days compared to 5 days, p<0.05). Patients in group 2 required lower total doses of opiate analgesia post-operatively. 90% of patients in group 2 were ambulant on the first post operative day, compared with less than 25% of patients in group 1. Mean knee flexion on discharge was greater in patients in group 2 compared with those in group 1 (85 degrees compared with 75 degrees). No infective complications from intra-articular catheter placement were observed. However, technical difficulties were encountered during the introduction period, including loss of catheter placement, leakage of local anaesthetic and adaptation of nursing time for top-up anaesthetic administration.

A rehabilitation regime involving local anaesthetic infiltration for total knee arthroplasty can successfully be adapted for use in a district general setting. Our results suggest if initial technical difficulties are overcome, this regime can provide effective postoperative analgesia, early mobilisation and reduced hospital stay.

Introduction

Cementless tibial fixation has been used for over 30 years. There are several potential advantages including preservation of bone stock and ease of revision. More importantly, for young active patients there is the potential for increased longevity of fixation. However, the clinical results have been variable, with reports of extensive radiolucent lines, rapid early migration and aseptic loosening. Problems appear to stem from a failure to become sufficiently osseointegrated, which in turn suggests a lack of primary stability. In order to achieve boney ingrowth, interface micromotions should be less than 50 microns, whereas fibrous tissue formation is known to occur if micrmotions are in excess of 150 microns. The degree of micromotion at the bone-implant interface are dependent on the kinematics and kinetics of the replaced joint. Finite element analyses has been used to assess primary stability, however, it is becoming increasing difficult to differentiate performance. The aim of this study was too examine the micromotion for a variety of different activities for three commercially available tibial tray designs.

Introduction

The number of total knee joint replacements has increased dramatically, from 28,000 in 2004 to over 73,000 in 2008 in the UK. This increase in procedures means that there is a need to assess the performance of an implant design in the general population. For younger, more active patients, cementless tibial fixation is an attractive alternative means of fixation and has been used for over 30 years. However, the clinical results with cementless fixation have been variable, with reports of extensive radiolucent lines, rapid early migration and aseptic loosening [1]. This study investigates the inter-patient variability of bone strain at the implant-bone interface of 130 implanted tibias over a full gait cycle.

The Acoustic Emission (AE) technique has been described as possessing ‘many of the qualities of an ideal damage-monitoring technique’, and the technique has been used successfully in recent years to aid understanding of failure mechanisms and damage accumulation in bone cement during de-bonding of the cement-metal interface fatigue loading, pre-load cracking during polymerisation and to describe and locate damage within an entire stem construct. However, most investigations to date have been restricted to in-vitro testing using surface mounted sensors. Since acoustic signals are attenuated as they travel through a material and across interfaces, it is arguable that mounting the sensors on the bone surface to investigate damage mechanisms occurring within the bone cement layer is not ideal. However, since direct access to the bone cement layer is not readily available, the bone surface is often the only practical option for sensor positioning.

This study has investigated the potential for directly embedding AE sensors within the femoral stem itself. This enables a permanent bond between the sensor and structure of interest, allows closer proximity of the sensor to the region of interest, and eliminates potential complications and variability associated with fixing the sensor to the sample. Data is collected during in-vitro testing of nominal implanted constructs, and information from both embedded and externally mounted AE sensors are compared and corroborated by microComputed Tomography (micro-CT) images taken both before and after testing.

The use of multiple AE sensors permitted the location as well as the chronology of damage events to be obtained in real time and analysed without the need for test interruption or serial sectioning of the test samples. Parametric analysis of the AE signal characteristics enabled those events likely to be associated with cracking as opposed to interfacial rubbing or de-bonding to be differentiated and it was shown that the embedded sensors gave a closer corroboration to observed damage using micro-CT and were less affected by unwanted sources of noise.

The results of this study have significant implications for the use of AE in assessing the state of total hip replacement (THR) constructs both in-vitro and potentially in-vivo. Incorporating the sensors into the femoral stem during in-vitro testing allows for greater repeatability between tests since the sensors themselves do not need to be removed and re-attached to the specimen. To date, all in-vivo studies attempting to use the AE technique to monitor the condition of any replacement arthroplasty device have used externally mounted sensors and suffered from the attenuation of acoustic information through flesh and skin. It is hypothesised that the use of directly embedded AE sensors may provide the first steps towards an in-vivo, cost effective, user friendly, non-destructive system capable of continuously monitoring the condition of the implanted construct and locating the earliest incidences of damage initiation.

Orthopaedic implants are often fixed into place using bone cement. The degradation of the cement mantle has been implicated as playing a major role in the loosening of these implants, and this often necessitates revision surgery. The present work has used the non-destructive acoustic emission (AE) technique to monitor the initiation and evolution of fatigue damage in bone cement constructs. Using this technique, it should be possible to gain an understanding of failure progression in cemented orthopaedic devices. Previous work in this area has focused on AE activity originating from the eventual failure location in order to identify those signatures associated with critical fatigue cracks. This usually involves analysing AE signatures associated with the final stages of failure; however, there have been limited investigations that have looked at the damage that takes up most of the crack propagation life of the sample, (i.e. microcracking formation and development), that occurs away from the failure site, but could still play a role in final failure.

In this study, dog-bone-shaped specimens of bone cement were subjected to uniaxial tensile fatigue loading, with damage monitored along the length of specimens using AE. Where specimens exhibited AE activity at locations away from the fracture site, they were sectioned and subjected to synchrotron tomography, which enabled high resolution images of these regions to be obtained. Microcracks of the order of 20 microns were observed in areas where AE had identified early, non-critical damage; in contrast, no microcracking was observed in areas that either remained unloaded or exhibited no AE. To further corroborate these observations, and characterise the damage mechanisms involved, scanning electron microscopy (SEM) was applied to the sectioned samples. In those locations where significant yet non-critical AE occurred, there was evidence of crack-bridging, suggesting that crack closure mechanisms may have slowed down or even arrested crack propagation within the bone cement.

These findings further validate the use of AE as a passive non-destructive method for the identification and understanding of damage evolution in cemented orthopaedic devices.

During hip replacement surgery the hip centre may become offset from its natural position and it is important to investigate the effect of this on the musculoskeletal system. Johnston et al [1] found that medialisation of the hip centre reduced the hip joint moment, hip contact and abductor force using a musculoskeletal model with hip centre displacements in 10mm increments. More recently an in vivo study found that the range of displacement of the hip centre of rotation was from 4.4mm laterally to 19.1mm medially [2]. To investigate the hypothesis that medialisation of the hip centre reduces the hip contact force, a musculoskeletal model of a single gait cycle was analysed using three scenarios with the hip in the neutral position and with it displaced by 10mm medially and laterally.

The lower limb musculoskeletal model included 162 Hill type muscle units in each leg and uses a muscle recruitment criterion based on minimising the squared muscle activities, where the muscle activity is the muscle force divided by the muscle’s maximum potential force. The maximum potential force is affected by the length of the muscle unit and the muscle’s tendons each are calibrated to give the correct length in its neutral position. The same gait analysis data from one normal walking cycle was applied to each modelled scenario and the resultant hip joint moment, hip contact force and muscle forces were calculated. The abductor muscles forces were summed and the peak force at heel strike reported. The peak resultant hip moments and the peak hip contact forces at heel strike are also reported and compared between the different scenarios. The scenarios were each run twice, once with the muscle tendon lengths calibrated for the hip in the altered position and subsequently with the muscle tendon lengths maintained from the neutral hip position.

For the medialising of the femoral head, the hip contact force and the peak abductor force were reduced by 4% and 2% respectively compared the neutral position. However if the tendon lengths of the muscles were maintained from the neutral position, the medial displacement model had a 3% higher hip contact force and a 6% larger abductor force than calculated for the neutral position. Although the peak resultant hip joint moment increases with a lateral displacement by 3%, the peak abductor force and peak hip contact force have a reduced force of 3% compared to the neutral hip. Using the muscle tendon lengths calibrated for the hip in the original position produces a 3% increase in the hip contact and abductor force for the lateralised femoral head.

This study has shown that the hip contact force and abductor force depend on the calibration of the muscle’s tendon lengths. Using the model with muscles calibrated for the altered hip centre produced the hypothesed reduction in hip contact force. However, maintaining the tendon lengths from the neutral position had a significant effect the calculated forces. The hip contact and abductor forces increased in the models with the original tendon lengths and the effect was also found to be greater when the hip was displaced medially.