There has been a longstanding need for a structural biomaterial that can serve as a bone graft substitute or implant construct and is effective for fixation by bone ingrowth. A porous tantalum material was developed to address these issues. The purpose of this paper and presnetation is to describe the properties and 2 to 5 year clinical results of porous tantalum in various reconstructive orthopaedic procedures. Porous tantalum has been used to manufacture primary and revision acetabular cups, acetabular augments, tibial and patella implants, patellar augments, structural devices for the treatment of osteonecrosis, and spinal fusion implants. Clinical follow-up includes: 2–5 year clinical and radiographic evaluation of: 414 monoblock cups in primary THA, 36 monoblock cups and 587 revision hemispheres used in revision THR, 16 hips revised with acetabular augments and revision hemispheres; 2 to 4 years for 101 tibial implants used in primary TKR and 69 patellas used in cementless TKR; 2–4 years for 11 patellar augments in salvage TKR, 1–5 years for 53 revision TKRs using knee spacers; 1–4 years for 91 osteone-crosis hip implants; and for 15 cervical fusion cases. This innovative tantalum implant material with trabecular architecture possesses advantages in stiffness, friction coefficient, porosity, rate and extent of tissue ingrowth, and versatility in manufacturing of structural devices. It has been clinically validated in numerous and diverse reconstructive procedures.
Press-fit acetabular reconstructions have become the standard THA; however, controversies remain. The purpose of this study was to critically evaluate serial radiographs for initial cup stability, i.e. gaps and signs of periacetabular interface changes for a porous tantalum monoblock socket. A multicenter study evaluating 574 primary THRs (542 patients) performed by 9 surgeons at 7 hospitals, all with a monoblock cup without screws. Analyses included clinical outcomes and detailed 2-year minimum radiographic evaluation by one independent observer (mean follow-up, 33 months). Complications included 9 intra-operative acetabular fractures. Among the 123 cases excluded from radiographic evaluations: deceased (19), lost-to-follow-up (8), 7 early revisions (recurrent dislocations (6) and one trauma-related loosening), and sepsis (3). Patient demographics (414 hips): mean age 65 years (19–93); 58 percent females. Baseline radiographs revealed 113 zones in 85 hips (21 percent) with acetabular gaps; 36 in zone I, 72 in zone II, and 5 in zone III. Of these radiolucencies, 57 zones were 1 mm or less and 56 zones ranged from 2 to 5 mm. At last follow-up, 64 hips (75 percent) had complete gap fill-in, including 100 percent of gaps greater than 3 mm. There were no socket migrations, no evidence of lysis, no revisions for loosening, and no complete periacetabular interface radiolucencies. The fill-in of preexisting OA cysts and gaps is attributed to adequate initial stability and osteointegration into the porous tantalum. These results suggest that a monoblock cup without screws is an attractive option in THA.
This paper reports the prospective 2 to 4 year clinical results of a porous tantalum monoblock tibia used in primary TKR, with comparison to a cemented modular tibial implant of the same articulating design. The subject tibial implant is relatively flexible design comprised of a porous tantalum base plate and direct compression molded polyethylene, with initial fixation achieved by press-fitting two porous tantalum posts. The porous tantalum implant was used without bone cement in 72 knees and with cement in 29 cases. The comparative tibial component was a cemented modular design with the same articulating surface. Clinical and radiographic data were collected prospectively, and consecutively, for 165 primary TKR cases implanted from 2000 – 2003 James Wood, Maurice Cates, Audley Mackel, Randall Morgan, Robert Poggie The early clinical and radiographic results for the porous tantalum monoblock tibia (cemented and cementless) and the modular cemented implant were statistically the same. The preliminary evidence suggests that cementless application of this design is an attractive alternative for younger, more active patients.
Revision TKA patients who have severe patellar bone loss or undergo patellectomy often have inferior clinical results. Current treatments are limited and often unsatisfactory. This study reports the surgical technique and clinical follow-up (4-year minimum) for 10 patients who underwent revision or salvage TKA and received a porous tantalum implant for replacement of their patella. The prosthesis is comprised of two parts, a poroustantalum base and titanium suture ring for initial fixation, and a polyethylene surface that is cemented to the base. The surgical technique evolved over the course of the first three cases, during which the suture technique and size (non-absorbable number 2) and bone preparation were defined. The results of this study indicate that this porous tantalum patella is an effective prosthetic option that is capable of improving function and reducing pain for patients with severe patellar boneloss and complicating factors.