To evaluate whether continuous training and education of posture can help children to improve kyphosis. A smart harness consisting of a tight-fitting harness and a posture sensing system was developed to measure kyphosis and to provide vibratory feedback during daily activities. The posture sensing system consisted of two sensor units and both units contained a 3-axis accelerometer and a 2-axis gyroscope to calculate the orientation. The dimensions and weight of each unit were 55 mm x 35 mm x 15 mm and 25g, respectively. One unit served as a master (placed at the T3 vertebral level) and the second unit served as a slave (placed at the T12 level) and they communicated wirelessly. The master unit calculated the kyphotic angle, similar to the vertebral centroid method but based on the sagital profile, and provided the vibratory feedback. One volunteer wore the unit and performed different postures and activities (walking, sitting, bending and sudden change from sitting to walking) in a gait analysis laboratory. The posture sensing system was sampled at 30Hz and a gait analysis 8-camera system was sampled at 60Hz. The kyphotic angles captured by the smart harness and camera system were compared. After this validation, the system was tested by 5 normal subjects (M, 25 10 years old) 3 hours per day for 4 consecutive days. For the first 2 days there was no feedback and the last 2 days there was feedback. The system took a sample every 30 seconds. When an undesirable posture was detected, the system switched to a fast sample mode at which time the system took ten measurements with a sample rate of 10 Hz for 1 second to further validate the measured kyphotic angle. These 10 measures were averaged to avoid feedback for postures that lasted only for a very short period of time. Posture orientation data was stored in the sensing unit memory and downloaded for outcomes evaluation.Purpose
Method
To correlate the initial brace correction with quantity and quality of brace wear within the first 6 months for the treatment of adolescent idiopathic scoliosis (AIS). Brace treatment for AIS has been debated for years. Prediction of treatment outcomes is difficult as the actual brace usage is generally unknown. As technology became more advanced, electronic devices were able to measure adherence in both quantity (how much time the brace has been worn) and quality (how tightly the brace has been worn) of brace usage without need for patient interaction. The developed adherence monitor consisted of a force sensor and a data acquisition unit. Subjects were monitored within the first 6 months of brace wear. The data sample rate was set to be one sample per minute. Data was downloaded at the patients routine clinical visits. The prescription, first in-brace and first follow-up out-of-brace Cobb angles were measured. Twelve AIS subjects (10F, 2M), age between 9.8 and 14.7 years, average 11.9 1.5 years, who were prescribed a new TLSO and full-time brace wear (23 hours/day) participated. All braces were made by the same orthotist. The force value at the major pressure pad at the prescribed tightness level was recorded as the individualized reference value. The normalized force value (measured force magnitude relative to the individualized reference value) was used for the quality factor. The time of brace usage relative to the prescribed time was used as the quantity factor.Purpose
Method