The choice of whether to perform antegrade intramedullary nailing (IMN) or plate fixation (PF) poses a conundrum for the surgeon who must strike the balance between anatomical restoration while reducing elbow and shoulder functional impairment. Most humeral middle third shaft fractures are amenable to conservative management given the considerable acceptable deformity and anatomical compensation by patients. This study is concerned with the patient reported outcomes regarding shoulder and elbow function for IMN and PF respectively.

A prospective cohort study following up all the cases treated surgically for middle third humeral fractures from 2016 to 2022 at a single centre. Telephonically an analogue pain score, an American Shoulder and Elbow Society (ASES) score for shoulder function and the Oxford Elbow score (OES) for elbow function were obtained.

One hundred and three patients met the inclusion criteria. Twenty four patients participated in the study, fifteen had IMN (62.5%) and nine had PF (37.5%.). The shoulder function outcomes showed no statistical difference with an average ASES score of sixty-six for the IMN group and sixty-nine for the PF group. Women and employed individuals expressed greater functional impairment. Hand dominance has no impact on the scores of elbow and shoulder function post operatively. The impairment of abduction score post antegrade nailing was higher in the antegrade nailing group than the plated group. The OES demonstrated greater variance in elbow function in the PF group with the IMN group expressing greater elbow disfunction.

This study confirms that treatment of middle third humerus shaft fractures by plate fixation is marginally superior to antegrade intramedullary nailing in preserving elbow function and abduction ability.

Abstract

Abstract

The Coronavirus pandemic mandated an immediate and dramatic change in the delivery of acute trauma services to minimise face-to-face contact. In our hospital, patients presenting to the Emergency Department with a knee injury and no fracture seen on Xrays were referred to a “Virtual Fracture Clinic” (VFC) where Xrays and clinical notes were reviewed by the duty Trauma and Orthopaedic Consultant the following working day. We present the outcomes of 101 consecutive patients managed through this process and deemed to have a “Soft Tissue Knee Injury” with a minimum follow-up of six months.

All Xrays were reviewed by a sub-specialist knee surgeon blinded to notes or clinical outcomes. Electronic clinical records were reviewed to determine further clinical appointments, surgical treatment and pending interventions.

Of 101 patients, the knee surgeon diagnosed 1 Fracture, 4 Lipo-haemarthroses, 41 significant effusions and 55 patients with normal Xrays. Correlation to urgent surgery was 100% for fracture (1/1), 25% for Lipo-haemarthrosis (1/4), 7.3% for significant effusion (3/41) and 9.1% for normal Xrays (5/55). A further 9.8% (4/41) of the “effusion” group and 7.3% (4/55) of the “normal” group were subsequently listed for non-urgent surgery.

Overall 17% (7/41) of “effusion” patients and 16% (9/55) of “normal” patients required surgery. Management plans from VFC varied within groups.

Acute “soft-tissue” injuries of the knee in adults cannot be reliably managed via VFC based on X-ray findings. A staged review by an appropriately trained health professional could reduce demand on acute knee surgical clinics and may enhance patient outcomes.

Introduction

Offset femoral broach handles have become more common as the anterior approach in total hip arthroplasty has increased in popularity. The difference in access to the femur compared to a posterior approach necessitates anterior and, in some cases, lateral offsets incorporated into the design of the broach handle to avoid interference with the patient's body and to ensure accessibility of the strike plate.

Using a straight broach handle with a primary stem, impaction force is typically directed along the axis of the femoral broach. However, the addition of one or more offsets to facilitate an anterior approach results in force transmission in the transverse plane, which is unnecessary for eating the femoral broach. The direction of forces transmitted to the broach via strike plate impaction can introduce a large moment. A negative consequence of this moment is the amplification of stresses/strains at the bone/broach interface, which increases the likelihood of femoral fracture during impaction.

It was proposed that optimizing the angle of the strike plate could minimize the moment to reduce the unintended stresses/strains at the bone/broach interface.

Introduction

Outcomes following large joint arthroplasty are influenced by the accuracy of implant placement. Patient specific (PS) technology has been used in knee arthroplasty surgery however, its application in total hip arthroplasty remains relatively unexplored.

Background

High functional aspirations and an active ageing population equate to a growing number of patients awaiting hip arthroplasty demanding superior biomechanical function. The purpose of this study was to compare the biomechanics of top walking speed between two commonly used hip arthroplasty procedures to determine if a performance advantage existed.

SUMMARY

We report a prospective study of clinical data collected pre, intra and post operation to remove both cup and head components of 118 failed, current generation metal on metal (MOM) hips. Whilst component position was important, the majority were unexplained failures and of these the majority (63%) had cup inclination angles of less than 55 degrees. Poor biocompatibility of the wear debris may explain many of the failures.

Purpose: The authors would like to report the outcome following evaluation of surgical treatment for acetabular fractures with more than 10 years follow-up.

Materials and methods: 133 consecutive patients were evaluated with 10–16 years post surgery follow-up (mean 12 years). Mean age was 34 years (17 to 70 range) and male: female were 2:1. 90% of our cases were tertiary referrals. The follow-up assessments included AP pelvis and Judet view radiographs and clinical evaluation was performed with the Harris hip score, Modified Merle d’Aubigne score and the SF 36v2 health survey.

Results: Fracture reduction was anatomical in 69% of the patients and in 31% it was non-anatomical. The reduction of the acetabular fractures was considered anatomical when all five lines on post-operative radiographs were corrected and the hip was congruent. Among our patients, 19% had excellent clinical results according to the modified Merle d’Aubigne Score and 58% according to the Harris Hip Score. A poor clinical outcome was identified in 18% of our patients according to the modified Merle d’Aubigne Score and 23% according to the Harris Hip Score. Radiographic evidence of osteoarthritis was in 35,8% of our patients (all grades of arthritis). 6 of our patients had neurological complications (sciatic nerve palsy) (3 pre-operatively, 2 post- operatively and in one patient there was a delayed sciatic nerve palsy secondary to haematoma). In 7 patients (8.6%) there was heterotopic ossification but in only three that was clinically a problem. Two patients developed intraoperatively pulmonary embolism. We had no post-operative deep vein thrombosis or pulmonary embolism.

Conclusions: Our results compare favourably with those of previous published studies with shorter follow-up period. Anatomical fracture reduction is mandatory and improves the clinical outcome. Infection and avascular necrosis are associated with poor clinical outcome. Early surgical intervention for displaced acetabular fractures can improve the final outcome.

Acetabular and pelvic fractures are amongst the most challenging to treat, still requiring major open surgery. The operations to reduce and fix them entail lengthy operative time, significant blood loss and use of ionising radiation.

We report on the initial stages of developement of a minimally invasive method for navigated reduction and percutaneous fixation of acetabular fractures (NRFA). A commercial navigation platform (Acrobot Ltd.) will be adapted for use with this technique. CT based planning will be used to identify the correct realignment of the the bone fragments, which will then be reduced percutaneously with the aid of two tracked arms attached to the navigation system. Schanz pins, which are inserted in pre-operatively planned sites in each fragment using safe trajectories, are handled as joysticks to manipulate the fracture under computer assistance. Registration of the fragments after insertion of the joysticks will be carried out by means of fluoroscopic images of the AP and Judet views of the fractured acetabulum. Once reduction is achieved by following on-screen instructions, the joysticks are held in place by a custom clamping system connected to one of the arms, while the other is used for percutaneous insertion of column screws.

This technique is potentially suitable for a number of acetabular fractures which include transverse, anterior column, posterior column, T-fractures and some associated both columns fractures. These constitute over 50% of Letournel’s and 60% of Matta’s original series of acetabular fractures. Furthermore, this percutaneous technique could reduce bleeding, wound complications, hospital stay and cost of treatment. Intra operative ionising radiation would be greatly reduced for both patients and the surgeons.

Adequate training with the use of this software may provide a greater number of surgeons the capability to surgically treat these complex fractures.

Purpose: The relationship of pattern of injury to this region of the knee to the intraoperative finding of abnormal common peroneal nerve position and associated nerve palsy was studied.

Methods: 54 consecutive patients with posterolateral corner disruption requiring surgery were assessed prospectively by MRI, arthroscopic examination, and by operative display. The pattern of disruption, the status of the biceps tendon and any displacement of the common peroneal nerve were recorded.

Results: Of the 54 cases, there were 9 with CPN palsy, 18 were seen to have distal injuries (13 suffering a fibular head avulsion fracture and 5 biceps tendon avulsion with no fracture). There was a strong relationship (p< 0.001) between such distal posterolateral corner injury and abnormal position of the common peroneal nerve, as 16 of the 18 (90%) patients were seen to have abnormal nerve position. No proximal injury resulted in abnormal nerve position and only 1 was associated with CPN palsy. 7 of the 13 cases of fibular head fracture had CPN palsy, and 1 of the 5 distal soft tissue avulsions.

Conclusion: There is a strong association of distal soft tissue avulsion and fibular head fracture and CPN palsy in these injuries. Whenever such a distal injury is suspected, the surgeon operating in this region should expect an abnormal position of the common peroneal nerve and appreciate the increased risk of iatrogenic damage. Presumably since the CPN is intimately bound to the biceps tendon by deep fascia, proximal retraction of the biceps tendon results in displacement of the CPN to an abnormal position and accounts for the high incidence of nerve palsy.

Aims: The objective of this study was to clinically assess the outcome of CADCAM femoral components in the revision hip replacement. Methods: Between 1991 and 2000, 125 revision total hip replacements using CAD-CAM femoral components were performed. Clinical assessment was performed using the Harris Hip score, by direct patient consultation, and telephone or postal questionnaire. Survivorship was defined as the requirement for revision. Results: The patients were reviewed at a mean of 5.2 yrs (1 to 10)

The mean Harris hip score increased from 44 points (range, 27 to 71 points) preoperatively to 71 points (range, 21 to 98 points) at the time of the most recent follow-up. 9 patients required subsequent revision; 4 for aseptic loosening, 1 for septic loosening and 4 for fracture of the femoral component. Conclusions: CAD-CAM technology provides a viable alternative to the challenge of revision hip surgery, with results comparable to other cementless techniques.