Abstract. Introduction. Recurrent groin pain following periacetabular osteotomy (PAO) is a challenging problem. The purpose of our study was to evaluate the position and dynamics of the psoas tendon as a potential cause for recurrent groin pain following PAO. Methods. Patients with recurrent groin pain following PAO were identified from a single surgeon series. A total of 13 patients with 18 hips (4.7%) out of a 386 PAO, had recurrent groin pain. Muscle path of the psoas tendon was accurately represented using 3D models from CT data were created with Mimics software. A validated discrete element model using rigid body springs was used to predict psoas tendon movement during hip circumduction and walking. Results. Five out of the 18 hips did not show any malformations at the osteotomy site. Thirteen hips (72%) showed malformation secondary to callus at the superior pubic ramus. These were classified into: osteophytes at the osteotomy site, hypertrophic callus or non-union and malunion at the osteotomy. Mean minimal distance of the psoas tendon to osteophytes was found to be 6.24 mm (n=6) and to the osteotomy site was 14.18 mm (n=18). Conclusions. Recurrent groin pain after PAO needs a thorough assessment. One need to have a high suspicion of psoas issues as a cause. 3D CT scan may be necessary to identify causes related to healing of the pubic osteotomy. Dynamic ultrasound of the psoas psoas tendon may help in evaluating for psoas impingement as a cause of recurrent groin pain in these cases

Psoas tendinopathy is a potential cause of groin pain after primary total hip arthroplasty (THA). The direct anterior approach (DAA) is becoming increasingly popular as the standard approach for primary THA due to being a muscle preserving technique. It is unclear what the prevalence is for the development of psoas-related pain after DAA THA, how this can influence patient reported outcome, and which risk factors can be identified. This retrospective case control study of prospectively recorded data evaluated 1784 patients who underwent 2087 primary DAA THA procedures between January 2017 and September 2019. Psoas tendinopathy was defined as (1) persistence of groin pain after DAA THA and was triggered by active hip flexion, (2) exclusion of other causes such as dislocation, infection, implant loosening or (occult) fractures, and (3) a positive response to an image-guided injection with xylocaine and steroid into the psoas tendon sheath. Complication-, re-operation rates, and patient-reported outcome measures (PROMs) were measured. Forty-three patients (45 hips; 2.2%) were diagnosed with psoas tendinopathy according to the above-described criteria. The mean age of patients who developed psoas tendinopathy was 50.8±11.7 years, which was significantly lower than the mean age of patients without psoas pain (62.4±12.7y; p<0.001). Patients with primary hip osteoarthritis were significantly less likely to develop psoas tendinopathy (14/1207; 1.2%) in comparison to patients with secondary hip osteoarthritis to dysplasia (18/501; 3.6%) (p<0.001) or FAI (12/305; 3.9%) (p<0.001). Patients with psoas tendinopathy had significantly lower PROM scores at 6 weeks and 1 year follow-up. Psoas tendinopathy was present in 2.2% after DAA THA. Younger age and secondary osteoarthritis due to dysplasia or FAI were risk factors for the development of psoas tendinopathy. Post-operatively, patients with psoas tendinopathy often also presented with low back pain and lateral trochanteric pain. Psoas tendinopathy had an important influence on the evolution of PROM scores

Tenotomy of the iliopsoas tendon has been described as an effective procedure to treat refractive groin pain induced by iliopsoas tendinitis. However, the procedure forces the rectus femoris to act as the primary hip flexor and little is known about the long-term effects of this procedure on the peri-articular muscle envelope (PAME). Studies suggest that iliopsoas tenotomy results in atrophy of the iliopsoas and decreased hip flexion strength with poorer outcomes, increasing the susceptibility for secondary tendinopathy. The aim of this study is to describe changes in the PAME following psoas release. All patients who presented for clinical examination at our hospital between 2016 and 2021 were retrospectively reviewed. Patients who presented after psoas tenotomy with groin pain and who were unable to actively lift the leg against gravity, were included. Pelvic MRI was taken. Qualitative muscle evaluation was done with the Quartile classification system. Quantitative muscle evaluation was done by establishing the cross-sectional area (CSA). Two independent observers evaluated the ipsi- and contralateral PAME twice. The muscles were evaluated on the level: iliacus, psoas, gluteus minimus-medius-maximus, rectus femoris, tensor fasciae lata, piriformis, obturator externus and internus. For the qualitative evaluation, the intra- and inter-observer reliability was calculated by using kappastatistics. A Bland-Altman analysis was used to evaluate the intra- and inter-observer reliability for the quantitative evaluation. The Wilcoxon test was used to evaluate the changes between the ipsi- and contra-lateral side. 17 patients were included in the study. Following psoas tenotomy, CSA reduced in the ipsilateral gluteus maximus, if compared with the contralateral side. Fatty degeneration occurred in the tensor fascia latae. Both CSA reduction and fatty degeneration was seen for psoas, iliacus, gluteus minimus, piriformis, obturator externus and internus. No CSA reduction and fatty degeneration was seen for gluteus medius and rectus femoris. Conclusions/Discussion. Following psoas tenotomy, the PAME of the hip shows atrophy and fatty degeneration. These changes can lead to detrimental functional problems and may be associated with debilitating rectus femoris tendinopathy. In patients with psoas tendinopathy, some caution is advised when considering an iliopsoas tenotomy

Sarcopenia has been observed to be a predictor of mortality in international studies of patients with metastatic disease of the spine. This study aimed to validate sarcopenia as a prognostic tool in a New Zealand setting. A secondary aim of this study was to assess the intra-observer reliability of measurements of psoas and vertebral body cross sectional areas on computed tomography imaging. A cohort of patients who had presented to Waikato Hospital with secondary neoplasia in the spinal column from 2014 to 2018 was selected. Cross sectional psoas and vertebral body areas were measured at the mid-pedicle L3 level, followed by calculation of the psoas to vertebral body cross sectional area ratio. Psoas to vertebral body cross sectional area ratio was compared with survivorship. The strength of the correlation between sarcopenia and survivorship was compared with the correlation between serum albumin and survivorship, as well as the correlation between the Metastatic Spine Risk Index (MSRI) and survivorship. A total of 110 patients who received operative (34) and non-operative (76) were included. The results demonstrate that psoas to vertebral body cross sectional area ratio is not statistically significantly correlated with survivorship (p=0.53). Serum albumin is significantly correlated with survivorship (p<0.0001), as was the MSRI. There is good intra-observer and inter-observer reliability for measurements of psoas to vertebral body cross sectional area. This study failed to demonstrate the utility for the psoas to vertebral body cross sectional area ratio that other studies have demonstrated in estimating survivorship. Serum albumin levels remain a useful prognostic indicator in patients with secondary tumours in the vertebral column

Iliopsoas tendonitis after total hip arthroplasty (THA) can be a considerable cause of pain and patient dissatisfaction. The optimal cup position to avoid iliopsoas tendonitis has not been clearly established. Implant designs have also been developed with an anterior recess to avoid iliopsoas impingement. The purpose of this cadaveric study was to determine the effect of cup position and implant design on iliopsoas impingement. Bilateral THA was performed on three fresh frozen cadavers using oversized (jumbo) offset head center revision acetabular cups with an anterior recess (60, 62 and 66 mm diameter) and tapered wedge primary stems through a posterior approach. A 2mm diameter flexible stainless steel cable was inserted into the psoas tendon sheath between the muscle and the surrounding membrane to identify the location of the psoas muscle radiographically. CT scans of each cadaver were imported in an imaging software. The acetabular shells, cables as well as pelvis were segmented to create separate solid models of each. The offset head center shell was virtually replaced with an equivalent diameter hemispherical shell by overlaying the outer shell surfaces of both designs and keeping the faces of shells parallel. The shortest distance between each shell and cable was measured. To determine the influence of cup inclination and anteversion on psoas impingement, we virtually varied the inclination (30°/40°/50°) and anteversion (10°/20°/30°) angles for both shell designs. The CT analysis revealed that the original orientation (inclination/anteversion) of the shells implanted in 3 cadavers were as follows: Left1: 44.7°/23.3°, Right1: 41.7°/33.8°, Left2: 40/17, Right2: 31.7/23.5, Left3: 33/2908, Right3: 46.7/6.3. For the offset center shells, the shell to cable distance in all the above cases were positive indicating that there was clearance between the shells and psoas. For the hemispherical shells, in 3 out of 6 cases, the distance was negative indicating impingement of psoas. With the virtual implantation of both shell designs at orientations 40°/10°, 40°/20°, 40°/30° we found that greater anteversion helped decrease psoas impingement in both shell designs. When we analyzed the influence of inclination angle on psoas impingement by comparing wire distances for three orientations (30°/20°, 40°/20°, 50°/20°), we found that the effect was less pronounced. Further analysis comparing the offset head center shell to the conventional hemispherical shell revealed that the offset design was favored (greater clearance between the shell and the wire) in 17 out of 18 cases when the effect of anteversion was considered and in 15 out of 18 cases when the effect of inclinations was considered. Our results indicate that psoas impingement is related to both cup position and implant geometry. For an oversized jumbo cup, psoas impingement is reduced by greater anteversion while cup inclination has little effect. An offset head center cup with an anterior recess was effective in reducing psoas impingement in comparison to a conventional hemispherical geometry. In conclusion, adequate anteversion is important to avoid psoas impingement with jumbo acetabular shells and an implant with an anterior recess may further mitigate the risk of psoas impingement

Introduction. Iliopsoas tendonitis after total hip arthroplasty (THA) can be a considerable cause of pain and patient dissatisfaction. The optimal cup position to avoid iliopsoas tendonitis has not been clearly established. Implant designs have also been developed with an anterior recess to avoid iliopsoas impingement. The purpose of this cadaveric study was to determine the effect of cup position and implant design on iliopsoas impingement. Materials. Bilateral THA was performed on three fresh frozen cadavers using oversized (jumbo) offset head center revision acetabular cups with an anterior recess (60, 62 and 66 mm diameter) and tapered wedge primary stems through a posterior approach. The relatively large shell sizes were chosen to simulate THA revision cases. At least one fixation screw was used with each shell. A 2mm diameter flexible stainless steel cable was inserted into the psoas tendon sheath between the muscle and the surrounding membrane to identify the location of the psoas muscle radiographically. Following the procedure, CT scans were performed on each cadaver. The CT images were imported in an imaging software for further analysis. The acetabular shells, cables as well as pelvis were segmented to create separate solid models of each. To compare the offset head center shell to a conventional hemispherical shell in the same orientation, the offset head center shell was virtually replaced with an equivalent diameter hemispherical shell by overlaying the outer shell surfaces of both designs and keeping the faces of shells parallel. enabled us to assess the relationship between the conventional shells and the cable. The shortest distance between each shell and cable was measured. To determine the influence of cup inclination and anteversion on psoas impingement, we virtually varied the inclination (30°/40°/50°) and anteversion (10°/20°/30°) angles for both shell designs. Results. The CT analysis revealed that the original orientation (inclination/anteversion) of the shells implanted in 3 cadavers were as follows: Left1: 44.7°/23.3°; Right1: 41.7°/33.8°; Left2: 40.0/17; Right2: 31.7/23.5; Left3: 33.0/2908; Right3: 46.7/6.3. For the offset center shells, the shell to cable distance in all the above cases were positive indicating that there was clearance between the shells and psoas. For the hemispherical shells, in 3 out of 6 cases, the distance was negative indicating impingement of psoas. With the virtual implantation of both shell designs at orientations 40°/10°, 40°/20°, 40°/30° we found that greater anteversion helped decrease psoas impingement in both shell designs. When we analyzed the influence of inclination angle on psoas impingement by comparing wire distances for three orientations (30°/20°, 40°/20°, 50°/20°), we found that the effect was less pronounced. Further analysis comparing the offset head center shell to the conventional hemispherical shell revealed that the offset design was favored (greater clearance between the shell and the wire) in 17 out of 18 cases when the effect of anteversion was considered and in 15 out of 18 cases when the effect of inclinations was considered. Discussion. Our results indicate that psoas impingement is related to both cup position and implant geometry. For an oversized jumbo cup, psoas impingement is reduced by greater anteversion while cup inclination has little effect. An offset head center cup with an anterior recess was effective in reducing psoas impingement in comparison to a conventional hemispherical geometry. In conclusion, adequate anteversion is important to avoid psoas impingement with jumbo acetabular shells and an implant with an anterior recess may further mitigate the risk of psoas impingement

Introduction and Objective. The human body is designed to walk in an efficient way. As energy can be stored in elastic structures, it is no surprise that the strongest elastic structure of the human body, the iliofemoral ligament (IFL), is located in the lower limb. Numerous popular surgical hip interventions, however, affect the structural integrity of the hip capsule and there is a growing evidence that surgical repair of the capsule improves the surgical outcome. Though, the exact contribution of the iliofemoral ligament in energy efficient hip function remains unelucidated. Therefore, the objective of this study was to evaluate the influence of the IFL on energy efficient ambulation. Materials and Methods. In order to assess the potential passive contribution of the IFL to energy efficient ambulation, we simulated walking using the large public dataset (n=50) from Schreiber in a the AnyBody musculoskeletal modeling environment with and without the inclusion of the IFL. The work required from the psoas, iliacus, sartorius, quadriceps and gluteal muscles was evaluated in both situations. Considering the large uncertainty on ligament properties a parameter study was included. Results. A significant reduction in the active component of all hip flexors was observed when the IFL is intact. The required muscle work was found to be reduced by as much as 48% (CI: 29–62%), 61% (CI: 35–84%) and 38% (CI: 2–69%) for the psoas, iliacus, and sartorius muscle respectively. The IFL inclusion has no major effect on the required work from the quadriceps and the gluteal muscle group. The energy storage in the IFL is largest at maximal hip extension and the contribution to forward motion is the largest at the start of the swing phase. Conclusions. The iliofemoral ligament seems to be a crucial structure in energy efficient walking. The findings support need for meticulous reconstruction of the capsule ligament in case of surgical damage

A previously fit and well 58 year old male suffered from a bilateral psoas haematoma (PH) following 52 days of veno-venous extracorporeal membranous oxygenation (VV-ECMO) for severe Coronavirus disease (COVID-19), refractory to all non-invasive and medical therapies. He developed multiple complications, including inability to walk or weight-bear, due to lumbar plexopathy triggered by bilateral PH compression, compounded by COVID-19-related mononeuritis multiplex. The patient was referred to our institution with a known diagnosis of bilateral PH and after spinal multidisciplinary team (MDT) input, was deemed not for surgical or interventional radiology treatments. The patient received extensive neurorehabilitation, coordinated by multiple MDTs. Although PH has been correlated to COVID-19, to the best of our knowledge this is the first reported case of such a complex presentation resulting in a dramatic bilateral PH. Health records from 3 large UK teaching hospitals were collected regarding treatment and follow up appointments, following patient's written informed consent. Patient's comorbidities, duration in hospital units, MDT inputs, health assessments, mobilisation progress and neurologic assessments, were all recorded. Data was collected retrospectively then prospectively due to lengthy in-patient stay. The literature review was conducted via PubMed and open access sources, selecting all the relevant studies and the ECMO guidelines. Patient received treatment from 3 different units in 3 hospitals over 212 days including 103 days in neurorehabilitation. Involvement of physiotherapy, dietitians, speech and language teams, neurologist, neurophysiotherapists, occupational therapists was required. The patient progressed from a bed-bound coma and inability to walk, to standing with lower limb backslab at discharge. Additionally, he was referred for elective exploratory surgery of the psoas region for scar debridement and potential nerve graft repair of the lumbosacral plexus. The surgery outcome is cautiously optimistic, with some improvement in nerve conduction studies, however is currently unknown regarding recovery progress and return to premorbid functional baseline. The novelty of this presentation yields significant learning points regarding early recognition of PH, requirements for vast MDT input and specialist use of VV-ECMO in severe COVID-19 patients. It also highlights the broad pathophysiology of SARS-CoV-2 causing neuropathy and coagulopathy; understanding this will optimise robust anticoagulation guidelines, required in VV-ECMO

Background. Trunk muscles play an important role in supporting the spinal column. A decline in trunk muscle mass, as measured by bioelectrical impedance analysis (TMM–BIA), is associated with low back pain and poor quality of life. Purpose. The purpose of this study was to determine whether TMM–BIA correlates with quantitative and functional assessments traditionally used for the trunk muscles. Methods. We included 380 participants (aged ≥ 65 years; 152 males, 228 females) from the Shiraniwa Elderly Cohort (Shiraniwa) study, for whom the following data were available: TMM–BIA, lumbar magnetic resonance imaging (MRI), and back muscle strength (BMS). We measured the cross-sectional area (CSA) and fat-free CSA of the paravertebral muscles (PVM), including the erector spinae (ES), multifidus (MF), and psoas major (PM), on an axial lumbar MRI at L3/4. The correlation between TMM–BIA and the CSA of PVM, fat-free CSA of PVM, and BMS was investigated. Results. TMMBIA correlated with the CSA of total PVM and each individual PVM. A stronger correlation between TMM–BIA and fat-free CSA of PVM was observed. The TMM–BIA also strongly correlated with BMS. Conclusion. TMM–BIA is an easy and reliable way to evaluate the trunk muscle mass in a clinical setting. Conflict of interest. None. Sources of funding. None

Dual mobility is a French concept that appeared in the 1970s and was initially intended to reduce dislocation rates. In recent years, this concept has evolved with new HA titanium spray coatings, new external macrostructures, and better-quality polyethylene. This has allowed to extend the indications to younger and therefore active populations. The objective of our work is to analyze at least 10 years a homogeneous and continuous series of 170 primary total hip replacements associating a latest generation Novae Sunfit. ®. dual mobility cup with a straight femoral stem. Only primary arthroplasties for osteoarthritis or necrosis were included. Total hip arthroplasty was always performed through a posterolateral approach. All patients had regular clinical and radiological follow-up. The average follow-up in our series was 11.5 years. The average age of the population is 71 years. At the last follow-up, there were 17 deaths, 6 losses to follow up and 9 adverse events, including 1 cup change for psoas impingement and 1 dislocation. The low rate of dislocation at 11 years confirms the high stability of the dual mobility, which should be recommended for primary procedure for patients at high risk of postoperative instability. The lack of intraprosthetic dislocation due to wear at 11 years of follow-up highlights the good quality of the latest generation of polyethylene, and the need to combine high-polished surfaces and a refined femoral neck with a dual mobility cup. Finally, the lack of aseptic loosening confirms the quality of the secondary fixation of these implants and justifies their wider use in all patients

The insidious and occult characteristics of psoas abscess and clinical features similar to conditions like lumbar strain, abdominal/urologic disorders sometimes cause diagnostic delays; resulting in considerably high morbidity and mortality. Chronic inflammatory conditions of the digestive tract and tuberculosis of spine are the commonest source of secondary abscess in the developed and developing countries, respectively [1]. We report a case of an 86 year with a psoas abscess secondary to mucinous adenocarcinoma of colon. 86 year old female presented with right thigh pain in February 2014. CT scan confirmed the clinical suspicion of right psoas abscess which was drained surgically. Intraoperatively, we found pus mixed with mucinous material coming from a small opening in a rounded structure lateral to psoas which could not be identified. The abscess recurred within 2 days. Culture grew Pseudomonas aerugenosa and streptococcus viridans and histopathology showed metastatsis of mucin secreting adenocarcinoma infiltrating the muscle with pyogenic abscess. Repeat CT scan showed abscess communicating with tumor in the colon(Fig 1). Abscess was drained, but tumor was not addressed considering patients age. The infection resolved with 6 weeks of oral linezolid, however the patient expired after 8 months. Cultures in secondary psoas abscess are often mixed, with E. coli and Bacteroides spp predominating. One must rule out gastrointestinal/genitourinary pathology in cases where the CT/ USG guided culture reports are suggestive of gram negative infection. The fact that carcinoma of the colon could be a cause of psoas abscess should be considered when an unexplained psoas abscess is diagnosed [2]. Acknowledgements. None of the authors received payments or services, either directly or indirectly from a third party in support of any aspect of this work that could be perceived to influence what is written

Abstract. Background. Optimal acetabular component position in Total Hip Arthroplasty is vital for avoiding complications such as dislocation, impingement, abductor muscle strength and range of motion. Transverse acetabular ligament (TAL) and posterior labrum have been shown to be a reliable landmark to guide optimum acetabular cup position. There have been reports of iliopsoas impingement caused by both cemented and uncemented acetabular components. Acetabular component mal-positioning and oversizing of acetabular component are associated with iliopsoas impingement. The Psoas fossa (PF) is not a well-regarded landmark to help with Acetabular Component positioning. Our aim was to assess the relationship of the TAL and PF in relation to Acetabular Component positioning. Methods. A total of 12 cadavers were implanted with the an uncemented acetabular component, their position was initially aligned to TAL. Following optimal seating of the acetabular component the distance of the rim of the shell from the PF was noted. The Acetabular component was then repositioned inside the PF to prevent exposure of the rim of the Acetabular component. This study was performed at Smith & Nephew wet lab in Watford. Results. Out of the twelve acetabular components that were implanted parallel to the TAL, all had the acetabular rim very close or outside to the psoas notch with a potential to cause iliopsoas impingement. Alteration of the acetabular component position was necessary in all cadavers to inside the PF to prevent iliopsoas impingement. It was evident that the edge of PF was not aligned with TAL. Conclusion. Optimal acetabular component position is vital to the longevity and outcome following THA. TAL provides a landmark to guide acetabular component position. We feel the PF is a better landmark to allow appropriate positioning of the acetabular component inside bone without exposure of the component rim and thus preventing iliopsoas impingement at the psoas notch. Declaration of Interest. (b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project

Abstract. Optimal acetabular component position in Total Hip Arthroplasty is vital for avoiding complications such as dislocation and impingement, Transverse acetabular ligament (TAL) have been shown to be a reliable landmark to guide optimum acetabular cup position. Reports of iliopsoas impingement caused by acetabular components exist. The Psoas fossa (PF) is not a well-regarded landmark for Component positioning. Our aim was to assess the relationship of the TAL and PF in relation to Acetabular Component positioning. A total of 22 cadavers were implanted on 4 occasions with the an uncemented acetabular component. Measurements were taken between the inner edge of TAL and the base of the acetabular component and the distance between the lower end of the PF and the most medial end of TAL. The distance between the edge of the acetabular component and TAL was a mean of 1.6cm (range 1.4–18cm). The distance between the medial end of TAL and the lowest part of PF was a mean of 1.cm (range 1,3–1.8cm) It was evident that the edge of PF was not aligned with TAL. Optimal acetabular component position is vital to the longevity and outcome following THA. TAL provides a landmark to guide acetabular component position. However we feel the PF is a better landmark to allow appropriate positioning of the acetabular component inside edge of the acetabulum inside the bone without exposure of the component rim and thus preventing iliopsoas impingement at the psoas notch and resultant groin pain

Introduction. Adolescent Idiopathic Scoliosis (AIS) is a three-dimensional deformity of the spine with unclear etiology. Due to the asymmetry of lateral curves, there are differences in the muscle activation between the convex and concave sides. This study utilized a comprehensive thoracic spine and ribcage musculoskeletal model to improve the biomechanical understanding of the development of AIS deformity and approach an explanation of the condition. Methods. In this study, we implemented a motion capture model using a generic rigid-body thoracic spine and ribcage model, which is kinematically determinate and controlled by spine posture obtained, for instance, from radiographs. This model is publicly accessible via a GitHub repository. We simulated gait and standing models of two AIS (averaging 15 years old, both with left lumbar curve and right thoracic curve averaging 25 degrees) and one control subject. The marker set included extra markers on the sternum and the thoracic and lumbar spine. The study was approved by the regional Research Ethics Committee (Journal number: H17034237). Results. We investigated the difference between the muscle activation on the right and left sides including erector spinae (ES), psoas major (PS), and multifidus (MF). Results of the AIS simulations indicated that, on average throughout the gait cycle, the right ES, left PS and left MF had 46%, 44%, and 23% higher activities compared to the other side, respectively. In standing, the ratios were 28%, 40%, and 19%, respectively. However, for the control subject, the differences were under 7%, except ES throughout the gait, which was 17%. Conclusion. The musculoskeletal model revealed distinct differences in force patterns of the right and left sides of the spine, indicating an instability phenomenon, where larger curves lead to higher muscle activations for stabilization. Acknowledgement. The project is funded by the European Union's Horizon 2020 program through Marie Skłodowska-Curie grant No. [764644]

Introduction. Dual-mobility (DM) liners have increased popularity due to the range of motion and stability provided by these implants. However, larger head diameters have been associated with anterior hip pain, due to surrounding soft-tissue impingement, particularly the iliopsoas. To address this, an anatomically contoured dual mobility (ACDM) liner was designed by reducing the volume of the liner below the equator (Fig1). Previous cadaver studies have shown that the ACDM significantly reduces iliopsoas tenting and trapping of the liner compared to conventional designs. We created a finite element study based on previous cadaver testing to further analyze the effectiveness of the ACDM design in reducing soft-tissue impingement, specifically the tendon-liner contact pressure and the tendon stress. Methods. The finite element model was developed within COMSOL 4.3b. The psoas tendon was modelled as a Yeoh hyper-elastic Material, which uses 3 constants (c1-c3), density (1.73g/cm3) and a bulk modulus (26GPa)[Hirokawa,2000]. In a previous, separate study, the average stiffness of 10 psoas tendon samples (5 cadavers), were measured to be 339[N/mm] in the linear region with average width and thickness of 14mmX4mm. The 3 constants were tuned to match experimental uniaxial test data, and were 5[GPa], 0[Gpa], and 46[GPa] for c1, c2, and c3 respectively. The implant components were rigidly modeled relative to the psoas. Cadaver specific CT models were used to create the FEA geometry. The insertion points for the Psoas were digitally determined on the proximal end of the lesser trochanter, and the psoas notch on the pelvis for hip flexion angles of −15°, 0°, 15° and 30°. These insertion points determined the length of the psoas and its relative position to the femoral head in 3D. The specific liner size and position for each cadaver was determined by implant planning with the CT models. In this abstract, we only present data for 2 specimens (left/right hips) with 44mm conventional DM, and 44mm ACDM, matching specimen anatomy. A 500N tensile load was applied to the psoas tendon proximally to simulate moderate physiological loading, the average/max stresses and contact pressures between the psoas and the two liner designs were determined. Results. At all flexion angles from −15° to 30°, the ACDM had lower psoas-liner contact pressure and stress compared to the conventional liner. Both contact pressure and tendon stress decreased for both liners with increasing hip flexion. At −15° flexion angle, there was an average contact pressure difference of .51MPa between the conventional and ACDM designs, or 37% decrease in pressure when using the ACDM. The average difference in tendon stress was 67.9MPa, or a 59% decrease in stress when using the ACDM (fig2, fig3). Conclusion. This study utilized cadaver specific FEA models to evaluate interaction between the iliopsoas tendon and conventional and ACDM liners. Although this abstract presented FEA models for only four hips (two specimens), the results show a notable reduction in contact pressure and tendon stress with ACDM designs. This validates findings from previous cadaver studies, suggesting that anatomically contoured designs could reduce anterior hip pain and soft tissue impingement

Iliopsoas impingement occurs in between 5–30% of patients after hip arthroplasty and has been thought to only be caused by an oversized cup, cup malpositioning, or the depth of the psoas valley. However, no study has associated the relationship between preoperative measurements with the risk of impingement. This study sought to assess impingement between the iliopsoas and acetabular cup using a novel validated model to determine the risk factors for iliopsoas impingement. 413 patients received lower limb CT scans and lateral x-rays that were segmented, landmarked, and measured using a validated preoperative planning protocol. Implants were positioned according to the preference of ten experienced surgeons. The segmented bones were transformed to the standing reference frame and simulated with a novel computational model that detects impingement between the iliopsoas and acetabular cup. Definitions of patients at-risk and not at-risk of impingement were defined from a previous validation study of the simulation. At-risk patients were propensity score matched to not at-risk patients. 21% of patients were assessed as being at-risk of iliopsoas impingement. Significant differences between at-risk patients and not at-risk patients were observed in standing pelvic tilt (p << 0.01), standing femoral internal rotation (p << 0.01), medio-lateral centre-of-rotation (COR) change (p << 0.01), supine cup anteversion (p << 0.01), pre- to postoperative cup offset change (p << 0.001), postoperative gross offset (p = 0.009), and supero-inferior COR change (p = 0.02). Impingement between the iliopsoas and acetabular cup is under-studied and may be more common than is published in the literature. Previously it has been thought to only be related to cup size or positioning. However, we have observed significant differences between at-risk and not at-risk patients in additional measurements. This indicates that its occurrence is more complex than simply being related to cup position

Purpose of the study: Intramuscular injection of the botulinum toxin into the psoas can be proposed for permanent hip flexion due to spastic disorders. Several approaches have been described: retrograde subinguinal, anterolateral suprailiac, and posterior. Ultrasound or computed tomography can be used to guide needle position. These approaches are however limited to access to the L4 region, i.e. far from the motor points and with the risk of injury to the ureter. The purpose of this work was to determine the innervations of the psoas muscle that would be best adapted to this type of injection and thus to describe the most effective and reliable approach. Material and methods: This anatomy study included 20 dissections to: describe vertebral insertions of the psoas major and the psoas minor and to measure their distance from the iliac crest; define the region where the ureter crosses in front of the psoas. Results: More than 80% of the psoas muscles presented a proximal insertion on the transverse process of T12 and the body of L1; the mean length of the psoas in the adult is 27 cm above the inguinal ligament; the nerve roots collateral to the lumbar plexus are: 33% L2, 25% L3, 19% L1, 9% L4, 3% L5 and 1% T12, the remainder arising directly from the femoral nerve; the L2-L3 region is situated 4.6 cm on average above the iliac crest. Discussion: The region facing the L2-L3 space enables access to more than 50% of the psoas nerve branches. Injection via a posterior approach situated in adults 4.6 cm above the iliac crest and identified fluoroscopically is the most reliable access. This will avoid injury to the ureter which lies lower. Conclusion: This anatomy study described a new more effective less dangerous approach for botulinum toxin injections into the psoas muscle

En bloc resection for primary bone tumours and isolated metastasis are complex surgeries associated with a high rate of adverse events (AEs). The primary objective of this study was to explore the relationship between frailty/sarcopenia and major perioperative AEs following en bloc resection for primary bone tumours or isolated metastases of the spine. Secondary objectives were to report the prevalence and distribution of frailty and sarcopenia, and determine the relationship between these factors and length of stay (LOS), unplanned reoperation, and 1-year postoperative mortality in this population. This is a retrospective study of prospectively collected data from a single quaternary care referral center consisting of patients undergoing an elective en bloc resection for a primary bone tumour or an isolated spinal metastasis between January 1st, 2009 and February 28th, 2020. Frailty was calculated with the modified frailty index (mFI) and spine tumour frailty index (STFI). Sarcopenia, determined by the total psoas area (TPA) vertebral body (VB) ratio (TPA/VB), was measured at L3 and L4. Regression analysis produced ORs, IRRs, and HRs that quantified the association between frailty/sarcopenia and major perioperative AEs, LOS, unplanned reoperation and 1-year postoperative mortality. One hundred twelve patients met the inclusion criteria. Using the mFI, five patients (5%) were frail (mFI ³ 0.21), while the STFI identified 21 patients (19%) as frail (STFI ³ 2). The mean CT ratios were 1.45 (SD 0.05) and 1.81 (SD 0.06) at L3 and L4 respectively. Unadjusted analysis demonstrated that sarcopenia and frailty were not significant predictors of major perioperative AEs, LOS or unplanned reoperation. Sarcopenia defined by the CT L3 TPA/VB and CT L4 TPA/VB ratios significantly predicted 1-year mortality (HR of 0.32 per one unit increase, 95% CI 0.11-0.93, p=0.04 vs. HR of 0.28 per one unit increase, 95% CI 0.11-0.69, p=0.01) following unadjusted analysis. Frailty defined by an STFI score ≥ 2 predicted 1-year postoperative mortality (OR of 2.10, 95% CI 1.02-4.30, p=0.04). The mFI was not predictive of any clinical outcome in patients undergoing en bloc resection for primary bone tumours or isolated metastases of the spine. Sarcopenia defined by the CT L3 TPA/VB and L4 TPA/VB and frailty assessed with the STFI predicted 1-year postoperative mortality on univariate analysis but not major perioperative AEs, LOS or reoperation. Further investigation with a larger cohort is needed to identify the optimal measure for assessing frailty and sarcopenia in this spine population

Introduction. Most of patients with unilateral hip disease shows muscle volume atrophy of pelvis and thigh in the affected side because of pain and disuse, resulting in reduced muscle weakness and limping. However, it is unclear how the muscle atrophy correlated with muscle strength in the patient with hip disorders. A previous study have demonstrated that the volume of the gluteus medius correlated with the muscle strength by volumetric measurement using 3 dimensional computed tomography (3D-CT) data, however, muscles influence each other during motions and there is no reports focusing on the relationship between some major muscles of pelvis and thigh including gluteus maximus, gluteus medius, iliopsoas and quadriceps and muscle strength in several hip and knee motions. Therefore, the purpose of the present study is to evaluate the relationship between muscle volumetric atrophy of major muscles of pelvis and thigh and muscle strength in flexion, extension and abduction of hip joints and extension of knee joint before surgery in patients with unilateral hip disease. Material and Methods. The subjects were 38 patients with unilateral hip osteoarthritis, who underwent hip joint surgery. They all underwent preoperative computed tomography (CT) for preoperative planning. There were 6 males and 32 females with average age 59.5 years old. Before surgery, isometric muscle strength in hip flexion, hip extension, hip abduction and knee extension were measured using a hand held dynamometer (µTas F-1, ANIMA Japan). Major muscles including gluteus maximus, gluteus medius, iliopsoas and quadriceps were automatically extracted from the preoperative CT using convolutional neural networks (CNN) and were corrected manually by the experienced surgeon. The muscle volumetric atrophy ratio was defined as the ratio of muscle volume of the affected side to that of the unaffected side. The muscle weakness ratio was defined as the ratio of muscle strength of the affected side to that of the unaffected side. The correlation coefficient between the muscle atrophy ratio and the muscle weakness ratio of each muscle were calculated. Results. The average muscle atrophy ratio was 84.5% (63.5%–108.2%) in gluteus maximus, 86.6% (65.5%–112.1%) in gluteus medius, 81.0% (22.1%–130.8%) in psoas major, and 91.0% (63.8%–127.0%) in quadriceps. The average muscle strength ratio was 71.5% (0%–137.5%) in hip flexion, 88.1% (18.8%–169.6%) in hip abduction, 78.6% (21.9%–130.1%) in hip extension and 84.3% (13.1%–122.8%) in knee extension. The correlation coefficient between the muscle atrophy and the ratio of each muscle strength between the affected and unaffected side were shown in Table 1. Conclusion. In conclusion, the muscle atrophy of gluteus medius muscle, psoas major muscle and quadriceps muscle significantly correlated with the muscle weakness in hip flexion. The muscle atrophy of psoas major muscle and quadriceps muscle also significantly correlated with the muscle weakness in knee extension. There were no significant correlation between the muscle atrophy and the muscle weakness in hip extension and abduction

Introduction. Iliopsoas impingement is a well described cause of groin pain after direct anterior total hip arthroplasty (THA). We proposed to evaluate the incidence, natural history and response to treatment of iliopsoas impingement after direct anterior total hip arthroplasty. Methods. A retrospective chart review of 725 consecutive patients who underwent anterior approach total hip arthroplasty between 2009 and 2014 was conducted. All surgeries were performed by one of two surgeons. Patients were included if they underwent primary anterior approach THA and had a minimum of 2 years of follow up. Patients who had a posterior approach, revision surgery or had less than 2 years of follow up were excluded. Iliopsoas impingement was identified if patients reported groin pain at greater than 6 weeks of postoperative follow up and in association with pain with resisted seated hip flexion. The natural history and response to treatment was recorded for patients identified as having iliopsoas impingement. Results. 900 patients met inclusion criteria. Of these, 120 (13.4%) developed groin pain following direct anterior total hip arthroplasty. The average time of onset was at 21 months postoperatively. At 2 years postoperatively, 16% of patients had symptoms, whereas 84% had resolution. 28% of patients responded to structured physical therapy, 22% improved with home stretching, 19% improved after arthroscopic psoas release, 9% after psoas sheath injection, and 6% required acetabular component revision. Conclusion. In our study population, iliopsoas impingement is not an uncommon finding after direct anterior total hip arthroplasty, but nearly half of these patients responded well to home stretching or physical therapy. In some cases, psoas injection and arthroscopic release was necessary. Rarely, cup revision was required for symptomatic relief