Ankle injuries in cricket fast bowlers are of topical interest with a number of elite pace bowlers recently sustaining injuries. Previous biomechanical research has concentrated on the injury risk to the fast bowler’s lumbar spine with no research focused on the leading leg and specifically the ankle biomechanics of the fast bowler and its predisposition to injury. We investigate the leading leg biomechanics in maximal and submaximal fast bowling. Ten fast-medium paced bowlers of elite level had their leading leg biomechanics assessed during their bowling action. Using a nine camera infra-red ViconTM 612 motion analysis system linked to a KistlerTM 9281CA force platform the moments of the subjects leading leg during their delivery stride was analysed. Each subject performed ten trials at a maximal ball release speed (> 97km/hr) and ten trials at a submaximal ball release speed (< 97km/hr) with the speed of the ball tracked by a SR3600 radar gun. All three large joints of the leg were observed and joint moments examined in both directions of all three orthogonal planes giving a total of eighteen joint moments investigated. Of these results only the difference in the ankle plantar flexion was found to be significant. The average ankle plantar flexion peak moment in the maximal and submaximal ball release speed groups were found to be 2.008Nm/kg and 1.790Nm/kg respectively. This difference was statistically significant (p< 0.02). The increased ankle plantar moment reflects the important role the ankle plays in the generation of extra ball release speed in the fast bowler. However this role does place increased stress on the ankle which may predispose it to injury. This study suggests that the ankle plays a significant role in the fast bowler’s delivery action and post injury rehabilitation needs to take this into consideration

Objective. To investigate the effectiveness of applying fast track surgery concept in primary total hip arthroplasty. Methods. The data of patients with primary total hip arthroplasty in our department from January 1, 2013 to October 1, 2015 were retrospectively analyzed. The patients were divided into traditional recovery group, enhanced recoverygroup and update enhanced recovery group according to different interventions. The blood loss, transfusion rate, complications rate, postoperative function, length of stay, hospitalization expense and readmission rate were compared between three groups. Results. A total of 435 cases were included. Compared with traditional recovery group, the average blood loss, length of stay and total cases of complication in update enhanced recovery group were reduced 91.44 ml, 1.34 days and 14.05%, respectively, and the differences showed statistical significance. From 2013 to 2015 the hip flexion and abduction degree increased annually, the differences also showed statistical significance. The blood transfusion rate, other complications and hospitalization expense were all reduced, but there were no statistical significance. Conclusions. The emphasis of fast track surgery concept in primary total hip arthroplasty was the management in perioperative period. Through continuous optimization of intervention measures under the guidance of evidence based medicine, it can effectively accelerate recovery, diminish complications and reduce the length of hospital stay

Introduction: Ankle injuries in cricketers are of topical interest with a number of elite fast bowlers sustaining injuries. Previous research has concentrated on the injury risk to the bowler’s vertebrae with no research focused on the ankle of the fast bowler and exploring the biomechanical basis for its predisposition to injury. Materials and methods: Ten elite level cricket fast bowlers had their ankle biomechanics assessed during their bowling action. Using a nine-camera infra-red ViconTM 612 motion analysis system linked to a KistlerTM 9281CA force platform the moments of the subjects leading leg ankle during their delivery stride was calculated and analysed. Each subject performed ten trials at their maximum ball release speed (> 97km/hr) and ten trials at less than their maximum ball release speed (< 97km/hr) with the velocity of the ball tracked by a SR3600 radar gun. Results: All six joint moments of the ankle were examined in both directions of all three orthogonal planes. Of these results only the difference in the ankle plantar flexion was found to be pertinent. The average ankle plantar flexion peak moment in the maximal ball release speed group was 2.008Nm/kg and in the sub-maximal ball release speed group 1.790Nm/kg. This difference was analysed using the paired Student t-test and was statistically significant (p< 0.02). Discussion: This study shows the ankle plays a significant part in the fast bowler’s delivery action and suggests a biomechanical reason for ankle injuries in these individuals. It is recommended that in fast bowlers with ankle injuries a graduated return to maximal speed bowling is utilised in rehabilitation to prevent further injury and long term morbidity. Conclusion: The increased ankle plantar moment reflects the important role the ankle plays in the generation of extra ball release speed in the cricket fast bowler

Recently, there is ongoing evidence regarding rapid recovery after orthopaedic surgery, with advantages for the patient relative to post operative pain, complications and functional recovery. The aim of this study is to present our experience in rapid recovery for adolescent idiopathic scoliosis in the last 2 years.

Retrospective study of 36 patients with adolescent idiopathic scoliosis, (age range 11 to 18 years) treated with spinal thoraco-lumbar posterior fusion with rapid post-operative recovery, compared with a similar group, treated with traditional protocol.

We found a statistically significant difference in terms of length-of-stay, patient-controlled-analgesia and use of oppioid and post operative blood transfusions. There was no difference in post operative infection rate.

Our experience shows better functional recovery, satisfactory controlled analgesia and reduction in costs of hospitalization with the use of ERAS protocols.

Aims

Hip dysplasia (HD) leads to premature osteoarthritis. Timely detection and correction of HD has been shown to improve pain, functional status, and hip longevity. Several time-consuming radiological measurements are currently used to confirm HD. An artificial intelligence (AI) software named HIPPO automatically locates anatomical landmarks on anteroposterior pelvis radiographs and performs the needed measurements. The primary aim of this study was to assess the reliability of this tool as compared to multi-reader evaluation in clinically proven cases of adult HD. The secondary aims were to assess the time savings achieved and evaluate inter-reader assessment.

Aims. It is important to analyze objectively the hammering sound in cup press-fit technique in total hip arthroplasty (THA) in order to better understand the change of the sound during impaction. We hypothesized that a specific characteristic would present in a hammering sound with successful fixation. We designed the study to quantitatively investigate the acoustic characteristics during cementless cup impaction in THA. Methods. In 52 THAs performed between November 2018 and April 2022, the acoustic parameters of the hammering sound of 224 impacts of successful press-fit fixation, and 55 impacts of unsuccessful press-fit fixation, were analyzed. The successful fixation was defined if the following two criteria were met: 1) intraoperatively, the stability of the cup was retained after manual application of the torque test; and 2) at one month postoperatively, the cup showed no translation on radiograph. Each hammering sound was converted to sound pressures in 24 frequency bands by fast Fourier transform analysis. Basic patient characteristics were assessed as potential contributors to the hammering sound. Results. The median sound pressure (SP) of successful fixation at 0.5 to 1.0 kHz was higher than that of unsuccessful fixation (0.0694 (interquartile range (IQR) 0.04721 to 0.09576) vs 0.05425 (IQR 0.03047 to 0.06803), p < 0.001). The median SP of successful fixation at 3.5 to 4.0 kHz and 4.0 to 4.5 kHz was lower than that of unsuccessful fixation (0.0812 (IQR 0.05631 to 0.01161) vs 0.1233 (IQR 0.0730 to 0.1449), p < 0.001; and 0.0891 (IQR 0.0526 to 0.0891) vs 0.0885 (IQR 0.0716 to 0.1048); p < 0.001, respectively). There was a statistically significant positive relationship between body weight and SP at 0.5 to 1.0 kHz (p < 0.001). Multivariate analyses indicated that the SP at 0.5 to 1.0 kHz and 3.5 to 4.0 kHz was independently associated with the successful fixation. Conclusion. The frequency bands of 0.5 to 1.0 and 3.5 to 4.0 kHz were the key to distinguish the sound characteristics between successful and unsuccessful press-fit cup fixation. Cite this article: Bone Jt Open 2024;5(3):154–161

Aims. It is important to analyze objectively the hammering sound in cup press-fit technique in total hip arthroplasty (THA) in order to better understand the change of the sound during impaction. We hypothesized that a specific characteristic would present in a hammering sound with successful fixation. We designed the study to quantitatively investigate the acoustic characteristics during cementless cup impaction in THA. Methods. In 52 THAs performed between November 2018 and April 2022, the acoustic parameters of the hammering sound of 224 impacts of successful press-fit fixation, and 55 impacts of unsuccessful press-fit fixation, were analyzed. The successful fixation was defined if the following two criteria were met: 1) intraoperatively, the stability of the cup was retained after manual application of the torque test; and 2) at one month postoperatively, the cup showed no translation on radiograph. Each hammering sound was converted to sound pressures in 24 frequency bands by fast Fourier transform analysis. Basic patient characteristics were assessed as potential contributors to the hammering sound. Results. The median sound pressure (SP) of successful fixation at 0.5 to 1.0 kHz was higher than that of unsuccessful fixation (0.0694 (interquartile range (IQR) 0.04721 to 0.09576) vs 0.05425 (IQR 0.03047 to 0.06803), p < 0.001). The median SP of successful fixation at 3.5 to 4.0 kHz and 4.0 to 4.5 kHz was lower than that of unsuccessful fixation (0.0812 (IQR 0.05631 to 0.01161) vs 0.1233 (IQR 0.0730 to 0.1449), p < 0.001; and 0.0891 (IQR 0.0526 to 0.0891) vs 0.0885 (IQR 0.0716 to 0.1048); p < 0.001, respectively). There was a statistically significant positive relationship between body weight and SP at 0.5 to 1.0 kHz (p < 0.001). Multivariate analyses indicated that the SP at 0.5 to 1.0 kHz and 3.5 to 4.0 kHz was independently associated with the successful fixation. Conclusion. The frequency bands of 0.5 to 1.0 and 3.5 to 4.0 kHz were the key to distinguish the sound characteristics between successful and unsuccessful press-fit cup fixation. Cite this article: Bone Jt Open 2024;4(3):154–161

The Fixion expandable nailing system provides an intramedullary fracture fixation solution without the need for locking screws. Proponents of this system have demonstrated shorter surgery times with rapid fracture healing, but several centres have reported suboptimal results with loss of fixation. This is the largest comparative series to be reported to date. We compared outcomes between 50 consecutive diaphyseal tibial fractures treated with a Fixion device at our institution to an age, sex and fracture configuration matched series of 57 fractures at a neighbouring hospital treated with a conventional interlocked intramedullary nail. Minimum follow up time was 2 years. Operating time was significantly reduced in the Fixion group (mean 61 minutes, range 20–99) compared to the interlocked group (88 minutes, 52–93), p< 0.00001. The union rate was no different between the Fixion group (93.9%) and the interlocked group (96.5%), p=0.527. Time to clinical and radiological union was significantly faster in the Fixion group (median 85 days, range 42–243) compared to the interlocked group (119, 70–362), p< 0.0001. The overall reoperation rate was lower in the Fixion series (24.5% vs 38.6%, p=0.121), although the majority of reoperations in the interlocked group were more minor, for screw removal. 3 Fixion nails were revised for fixation failure and 2 manipulations were required for rotational deformities after falls; all of these patients were non-compliant with post-operative instructions. There were no fixation failures in the interlocked group. 3 fractures were noted to propagate during inflation of Fixion nails. The Fixion nail is faster to implant and allows more physiological loading of the fracture, with a faster union time. However, these advantages are offset by a reduction in construct stability. Our results have demonstrated a learning curve with a reduction in complications as our indications were narrowed, avoiding osteoporotic, multifragmentary, unstable fractures and non-compliant patients

Anterior Cruciate Ligament injuries are a common cause of downgrade in Service personnel. The Multidisciplinary Injury Assessment Clinic (MIAC) is a service which patients can be referred to for expert musculoskeletal injury management. MIAC has a Fast Track (FT) referral system in place for imaging, and can subsequently refer isolated ACL injuries to a private provider for reconstruction. We examined this pathway in the South West region which has an overall population at risk of 19775. Over 4 years 173 knee injuries were referred to MIAC, of which 32 were ACL injuries. Of the 29 patients referred for MRI, the median time to imaging was 8 days with FT (n=13, range 2–14) and. 15 days via the NHS (n=16, range 5–64). The majority of injuries were found to involve multiple pathologies (n=19), excluding them from FT surgery. Time to NHS clinic from point of referral took a median time of 54 days, and onward delay to surgery was 47 days. None of the referrals to the private provider for reconstruction were accepted (n=3). We have identified aspects of current referral and treatment pathways that are inefficient and discuss a current solution utilising Military surgeons

Total knee arthroplasty (TKA) is a major orthopaedic intervention. The length of a patient's stay has been progressively reduced with the introduction of enhanced recovery protocols: day-case surgery has become the ultimate challenge.

This narrative review shows the potential limitations of day-case TKA. These constraints may be social, linked to patient’s comorbidities, or due to surgery-related adverse events (e.g. pain, post-operative nausea and vomiting, etc.).

Using patient stratification, tailored surgical techniques and multimodal opioid-sparing analgesia, day-case TKA might be achievable in a limited group of patients. The younger, male patient without comorbidities and with an excellent social network around him might be a candidate.

Demographic changes, effective recovery programmes and less invasive surgical techniques such as unicondylar knee arthroplasty, may increase the size of the group of potential day-case patients.

The cost reduction achieved by day-case TKA needs to be balanced against any increase in morbidity and mortality and the cost of advanced follow-up at a distance with new technology. These factors need to be evaluated before adopting this ultimate ‘fast-track’ approach.

Cite this article: Bone Joint J 2015;97-B(10 Suppl A):40–4.

Aims

Medial unicompartmental knee arthroplasty (mUKA) is an advised treatment for anteromedial knee osteoarthritis. While long-term survival after mUKA is well described, reported incidences of short-term surgical complications vary and the effect of surgical usage on complications is less established. We aimed to describe the overall occurrence and treatment of surgical complications within 90 days of mUKA, as well as occurrence in high-usage centres compared to low-usage centres.

Aims

To investigate the impact of consecutive perioperative care transitions on in-hospital recovery of patients who had primary total knee arthroplasty (TKA) over an 11-year period.

Introduction

To reduce several disadvantages many surgeons are not using tourniquet in TKA. Here we compared functional outcome along with pain and blood loss in sixty patients.

A near real-time, image-free, contact-determination algorithm is developed for the use of analyzing in vivo kinematics of an artificial knee joint. Using a three-dimensional motion tracker and the knowledge of the precise geometries of the contacting surfaces, the contact regions between two articular surfaces can be determined within seconds. The results are validated with the use of Fuji films, which show high degree of accordance in the contact regions determined. Applications include knee kinematics validation, TKA wear-pattern analysis, and intro-operative surgical assessment.

To determine the in vivo contact locations between total knee prosthetic components without the use of any imaging modality.

Validated with the Fuji film contact study, this computer algorithm provides an image-free, and accurate way of finding contact regions between prosthetic components.

An image-free, near real-time, algorithm is developed to study the in vivo contact condition between prosthetic components.

A Dynamic Reference Body (DRB) is attached to each of the Total Knee Arthroplasty component and their motions, while in contact with each other, are tracked with an optical spatial sensor. The geometries of the articular surfaces, represented in point-clouds with point-normal, were obtained from a laser-scanner at 0.4mm resolution. For each recorded pose, the contact between articular surfaces were determined by first matching point normal and then performing a nearest-point search, both facilitated by the use of a generalized binary-search-tree (kd-tree).

A size-3 Sigma Knee (Johnson& Johnson), represented by approximately 31,000/19,000 points for each of the femoral/tibial component, respectively, is used for this study. For each pose, the contact between components can be determined under one second on a 2GHz PC, rendering it applicable for intra-operative use. The contacts between prosthetic components are visualized using standard computer graphics techniques and contrasted with the contact obtained by Fuji film of the same pose. Depicted below, the contact regions determined by these two methods show high degree of accordance with each other. This allows for, in particular, an image-free TKA wear-pattern analysis.

Please contact Author for diagrams.

Background

For some time, optimized perioperative pathway protocols have been implemented in orthopedic surgery. In our hospital an accelerated clinical pathway has been successfully in effect for several years, focused on safely decreasing patients' length of stay and increasing their function at the time of discharge. The aim of the present project was to evaluate whether a further optimization is even more promising regarding early postoperative outcome parameters.

Introduction

Rapid identification of bacteria from extemporaneous samples would greatly help management of prosthesis joint infection. The aim of the present retrospective study was to evaluate a new molecular assay (GeneXpert MRSA-SA SSTI (Cepheid)) for detecting Staphylococcus aureus (SA) and methicillin resistance directly from bone and joint samples in less an hour (58 minutes).

Outcome measures are an essential element of our industry: comparing a novel procedure against an established one requires a reliable set of metrics that are comprehensible to both the technologist and the layman.

We surmised that a detailed assessment of function before and after knee arthroplasty, combined with a detailed set of personal goals would enable us to test the hypothesis that less invasive joint and ligament preserving operations could be demonstrated to be more successful, and cost effective. We asked the simple question: how well can people walk following arthroplasty, and can we measure this?

Abstract. Introduction. The study aims were to demonstrate rates, level, and time taken to RTP in elite sports after ACL reconstruction (ACL-R) and compare football and rugby. Methods. A retrospective review of a consecutive series of ACL-R between 2005 and 2019 was undertaken. Patients were included if they were elite athletes and were a minimum of 2 years post primary autograft ACL-R. The outcomes measured were return to play (RTP), (defined as participation in a professional match or in national/ international level amateur competition), time to RTP after surgery, and RTP level (Tegner score). Results. Three hundred and ninety four elite athletes with 420 ACL-Rs (235 in footballers, 125 in rugby players and 60 in other sports) were included. 95.7% of all athletes returned to competition at a mean of 10.3 months after ACL-R with 90.1% at the same / higher level. There was no difference in RTP rates between rugby and football. Rugby players RTP faster than footballers (9.6 vs 10.6 months, (p=0.027). Overall re-rupture rate within 2 years was 6.4% but not significantly different between football (8.1%) and rugby (7.2%). Footballers were more likely to rupture their ACL during jumping / landing manoeuvres and to receive a PT graft than rugby players. There were no significant differences between football and rugby regarding patient characteristics, intraoperative findings and re-operation rates. Conclusion. Over 95% of all elite athletes RTP after primary ACL-R with 90% able to play at the same level. Rugby players RTP significantly faster than footballers

Total Knee Arthroplasty (TKA) improves the quality of life of osteoarthritic and rheumatoid arthritis patients, however, is associated with moderate to severe postoperative pain. There are multiple methods of managing postoperative pain that include epidural anesthesia but it prevents early mobilization and results in postoperative hypotension and spinal infection. Controlling local pain pathways through intra-articular administration of analgesics is a novel method and is inexpensive and simple. Hence, we assess the effects of postoperative epidural bupivacaine injection along with intra-articular injection in total knee replacement patients. The methodology included 100 patients undergoing TKA randomly divided into two groups, one administered with only epidural bupivacaine injection and the other with intra-articular cocktail injection. The results were measured based on a 10-point pain assessment scale, knee's range of motion (ROM), and Lysholm knee score. The VAS score was lower in the intra-articular cocktail group compared to the bupivacaine injection group until the end of 1-week post-administration (p<0.01). Among inter-group comparisons, we observed that the range of motion was significantly more in cocktail injection as compared to the bupivacaine group till the end of one week (p<0.05). Lysholm's score was significantly more in cocktail injection as compared to the bupivacaine group till the end of one week (p<0.05). Our study showed that both epidural bupivacaine injection and intra-articular injection were effective in reducing pain after TKA and have a comparable functional outcome at the end of 4 weeks follow up. However, the pain relief was faster in cases with intra-articular injection, providing the opportunity for early rehabilitation. Thus, we recommend the use of intra-articular cocktail injection for postoperative management of pain after total knee arthroplasty, which enables early rehabilitation and faster functional recovery of these patients