While the COVID-19 pandemic highlighted the need for more accessible anatomy instruction tools, it is also well known that the time allocated to practical anatomy teaching has reduced in the past decades. Notably, the opportunity for anatomy students to learn osteology is not prioritised, nor is the ability of students to appreciate osteological variation. As a potential method of increasing accessibility to bone models, this study describes the process of developing 3D-printed replicas of human bones using a combination of structured light scanning (SLS) technology and 3D printing. Human bones were obtained from the Anatomy Lab at the University of Edinburgh and were digitised using SLS via an Einscan H scanner. The resulting data was then used to print multiple replicas of varying materials, colours, scales and resolutions on an Ultimaker S3 3D printer. To gather opinion on these models and their variables, surveys were completed by anatomy students and educators (n=57). Data was collected using a Likert scale response, as well as free-text answers to gather qualitative information. 3D scans of the scapula, atlas (C1 vertebrae) and femur were successfully obtained. Plastic replicas were produced with defined variables in 4 separate stations e.g. different colours, to obtain results from survey respondents. For colour, 87.7% of survey respondents preferred white models, with 7% preferring orange and 5.3% preferring blue. For material, 47.4% of respondents preferred PLA (Polylactic acid), while 33.3% preferred ABS (Acrylonitrile butadiene styrene), 12.3% preferred Pet-G (Polyethylene terephthalate glycol), 3.5% preferred Glassbend and 3.5% had no preference. Additional results based on scale and resolution were also collected. This initial study has demonstrated a proof-of-concept workflow for SLS technology to be combined with 3D printing to produce plastic replicas of human bones. Our study has provided key information about the colour, scale, material and resolution required for these models. Our future work will focus on determining accuracy of the models and their use as teaching aids for osteology education

3D printing can be used for the regeneration of complex tissues with intricate 3D microarchitecture. Trabecular bone is a complex and porous structure with a high degree of anisotropy. Changes in bone microarchitecture are associated with pathologies such as osteoporosis [1]. The objective of this study is to determine the viability of using 3D printing to replicate trabecular bone structures with a good control over the microarchitecture and mechanical properties. Cylindrical samples of bovine trabecular bone were used in this study. Micro-computed tomography (microCT) was carried out and an isotropic voxel size of 22 µm was obtained (Xradia Versa 520, Zeiss, USA). After 3D reconstruction the main microstructure characteristics were analysed using ImageJ (NIH, US). The 3D printed bone replicas were created by segmenting the microCT imaged bone tissue and then converted into a STL file using Avizo (FEI, US). The 3D printer used for this study was the ProJet 5500X (3D Systems, US), which allows a number of different materials to be printed in the same built with a resolution of 25 µm. Preliminary results were obtained using one single material (VisiJet CR-WT, Tensile Modulus: 1–1.6 GPa, Tensile Strength: 37–47 MPa). The 3D printed bone replicas followed a critical cleaning step to remove any remaining support material in the pores. MicroCT was then carried out for the bone replicas obtaining the same isotropic voxel size as for their biological counterparts. ImageJ was used to obtain the main microstructure characteristics. The values of bone volume fraction (BV/TV), mean trabecular thickness (Tb.Th), mean trabecular spacing (Tb.Sp), and degree of anisotropy (DA) were measured for bone samples and their 3D printed replicas [2]. Preliminary results on the first bone sample with its 3D printed replica showed similar apparent trabecular structures. Their respective BV/TV was found to be 0.24 (bone) and 0.43 (replica). The Tb.Th and Tb.Sp were 0.222 mm and 0.750 mm respectively for the bone and 0.376 mm and 0.575 mm for the replica. Finally, their respective DA was found to be 0.68 (bone) and 0.66 (replica). The main microstructure characteristics analyzed showed some differences between the bone sample and the 3D printed replica. In particular, the 3D microstructures resulted over-dimensioned mainly due to factors such as microCT voxel size, resolution of the 3D printer and supporting material removal. However this is a preliminary investigation. Further analysis will focus on optimizing the microCT imaging as well as the 3D printing process to achieve more accurate bone replicas. In addition, multi-material printing will be employed to optimize some of the mechanical properties obtained through in situ microCT testing and FE subject-specific modelling

Osteoporosis is a progressive, chronic disease of bone metabolism, characterized by decreased bone mass and mineral density, predisposing individuals to an increased risk of fractures. The use of animal models, which is the gold standard for the screening of anti-osteoporosis drugs, raises numerous ethical concerns and is highly debated because the composition and structure of animal bones is very different from human bones. In addition, there is currently a poor translation of pre-clinical efficacy in animal models to human trials, meaning that there is a need for an alternative method of screening and evaluating new therapeutics for metabolic bone disorders, in vitro. The aim of this project is to develop a 3D Bone-On-A-Chip that summarizes the spatial orientation and mutual influences of the key cellular components of bone tissue, in a citrate and hydroxyapatite-enriched 3D matrix, acting as a 3D model of osteoporosis. To this purpose, a polydimethylsiloxane microfluidic device was developed by CAD modelling, stereolithography and replica molding. The device is composed by two layers: (i) a bottom layer for a 3D culture of osteocytes embedded in an osteomimetic collagen-enriched matrigel matrix with citrate-doped hydroxyapatite nanocrystals, and (ii) a upper layer for a 2D perfused co-culture of osteoblasts and osteoclasts seeded on a microporous PET membrane. Cell vitality was evaluated via live/dead assay. Bone deposition and bone resorption was analysed respectively with ALP, Alizarin RED and TRACP staining. Osteocytes dendrite expression was evaluated via immunofluorescence. Subsequently, the model was validated as drug screening platform inducing osteocytes apoptosis and administrating standard anti-osteoporotic drugs. This device has the potential to substitute or minimize animal models in pre-clinical studies of osteoporosis, contributing to pave the way for a more precise and punctual personalized treatment

INTRODUCTION. Most total knees today are CR or PS, with lateral and medial condyles similar in shape. There is excellent durability, but a shortfall in functional outcomes compared with normals, evidenced by abnormal contact points and gait kinematics, and paradoxical sliding. However unicondylar, medial pivot, or bicruciate retaining, are preferred by patients, ascribed to AP stability or retention of anatomic structures (Pritchett; Zuiderbaan). Recently, Guided Motion knees have been shown to more closely reproduce anatomic kinematics (Walker; Willing; Amiri; Lin; Zumbrunn). As a design approach we proposed Design Criteria: reproduce the function of each anatomic stabilizing structure with bearing surfaces on the lateral and medial sides and intercondylar; resected cruciates because this is surgically preferred; avoid a cam-post because of central femur bone removal, soft tissue entrapment, noises, and damage (Pritchett; Nunley). Our hypothesis was that these criteria could produce a Guided Motion design with normal kinematics. METHODS & MATERIALS. Numerous studies on stability and laxity showed the ACL was essential to controlling posterior femoral displacement on the tibia whether the knee was loaded or unloaded. Under load, the anterior upwards slope of the medial tibial plateau prevented anterior displacement (Griffen; Freeman; Pinskerova; Reynolds). The posterior cruciate and the downward lateral tibial slope produced lateral rollback in flexion. The Replica Guided Motion knee had 3 bearings (Fig 1). The lateral side was shallow and sloped posteriorly, with a posterior lip to prevent excess displacement. The medial anterior tibial and femoral slopes were increased as in the anatomic knee. In the intercondylar region, a saddle bearing replaced ACL function by controlling posterior femoral displacement. For testing, a typical PS design was used as comparison. A Knee Test Machine (Fig 2) flexed the knee, and applied axial compression, shear and torque to represent a range of functions. Bone shapes were reproduced by 3D printing and collaterals by elastomeric bands. Motion was recorded with a digital camera, and Geomagic to process data. RESULTS. The kinematics of normal knees was the benchmark (Arno). The results for neutral path of motion, and the AP laxity about the neutral path, are shown (Fig 3). The PS showed symmetric motion, with anterior medial sliding and excessive constraint in low and high flexion. For the Replica, the medial condyle remained almost constant, but the lateral side rolled posteriorly with flexion, less than normal to prevent damage to the posterior lateral tibial plastic. The lateral side had similar anterior laxity to anatomic, but more than anatomic in late flexion. Based on 10 parameter motion scoring, the Replica was closer to normal than the PS, 82% cf 51%. DISCUSSION. Functional outcomes after TKA are less than normal, TKA design being a likely factor. The approach shown here is intended to reproduce more anatomic kinematics of neutral path of motion and laxity. Such a Replica Guided Motion knee, based on an anatomic structure/stability approach, could reproduce close to normal kinematics even without the cruciates or a cam-post. This may result in improved functional outcomes, and a closer feeling of a normal knee. For any figures or tables, please contact authors directly (see Info & Metrics tab above).

Cells typically respond to a variety of geometrical cues in their environment, ranging from nanoscale surface topography to mesoscale surface curvature. The ability to control cellular organisation and fate by engineering the shape of the extracellular milieu offers exciting opportunities within tissue engineering. Despite great progress, however, many questions regarding geometry-driven tissue growth remain unanswered. Here, we combine mathematical surface design, high-resolution microfabrication, in vitro cell culture, and image-based characterization to study spatiotemporal cell patterning and bone tissue formation in geometrically complex environments. Using concepts from differential geometry, we rationally designed a library of complex mesostructured substrates (10. 1. -10. 3. µm). These substrates were accurately fabricated using a combination of two-photon polymerisation and replica moulding, followed by surface functionalisation. Subsequently, different cell types (preosteoblasts, fibroblasts, mesenchymal stromal cells) were cultured on the substrates for varying times and under varying osteogenic conditions. Using imaging-based methods, such as fluorescent confocal microscopy and second harmonic generation imaging, as well as quantitative image processing, we were able to study early-stage spatiotemporal cell patterning and late-stage extracellular matrix organisation. Our results demonstrate clear geometry-dependent cell patterning, with cells generally avoiding convex regions in favour of concave domains. Moreover, the formation of multicellular bridges and collective curvature-dependent cell orientation could be observed. At longer time points, we found clear and robust geometry-driven orientation of the collagenous extracellular matrix, which became apparent with second harmonic generation imaging after ∼2 weeks of culture. Our results highlight a key role for geometry as a cue to guide spatiotemporal cell and tissue organisation, which is relevant for scaffold design in tissue engineering applications. Our ongoing work aims at understanding the underlying principles of geometry-driven tissue growth, with a focus on the interactions between substrate geometry and mechanical forces

In the last years, 3d printing has progressively grown and it has reached a solid role in clinical practice. The main applications brought by 3d printing in orthopedic surgery are: preoperative planning, custom-made surgical guides, custom-made im- plants, surgical simulation, and bioprinting. The replica of the patient's anatomy, starting from the elaboration of medical volumetric images (CT, MRI, etc.), allows a progressive extremization of treatment personalization that could be tailored for every single patient. In complex cases, the generation of a 3d model of the patient's anatomy allows the surgeons to better understand the case — they can almost “touch the anatomy” —, to perform a more ac- curate preoperative planning and, in some cases, to perform device positioning before going to the surgical room (i.e. joint arthroplasty). 3d printing is also commonly used to produce surgical cutting guides, these guides are positioned intraoperatively on given landmarks to guide the surgeon to perform a specific surgical act (bone osteotomy, bone resection, implant position, etc.). In total knee arthroplasty, custom-made cutting guides have been developed to help the surgeon align the femoral and tibial components to the pre-arthritic condition with- out the use of the intramedullary femoral guide. 3d printed custom-made implants represent an emerging alternative to biological reconstructions especially after oncologic resection surgery or in case of complex arthroplasty revision surgery. Custom-made implants are designed to re- place the original shape and size of the patient's bone and they allow an extreme personalization of the treatment for every single patient. Patient-specific surgical simulation is a new frontier that promises great benefits for surgical training. a solid 3d model of the patient's anatomy can faithfully reproduce the surgical complexity of the patient and it allows to generate surgical simulators with increasing difficulty to adapt the difficulties of the course with the level of the trainees performing structured training paths: from the “simple” case to the “complex” case

Vertebral metastases are the most common type of malignant lesions of the spine. Although this tumour is still considered incurable and standard treatments are mainly palliative, the standard approach consists in surgical resection, which results in the formation of bone gaps. Hence, scaffolds, cements and/or implants are needed to fill the bone lacunae. Here, we propose a novel approach to address spinal metastases recurrence, based on the use of anti-tumour metallic-based nanostructured coatings. Moreover, for the first time, a gradient microfluidic approach is proposed for the screening of nanostructured coatings having anti-tumoral effect, to determine the optimal concentration of the metallic compound that permits selective toxicity towards tumoral cells. Coatings are based on Zinc as anti-tumour agent, which had been never explored before for treatment of bone metastases. The customized gradient generating microfluidic chip was designed by Autodesk Inventor and fabricated from a microstructured mould by using replica moulding technique. Microstructured mould were obtained by micro-milling technique. The chip is composed of a system of microfluidic channels generating a gradient of 6 concentrations of drug and a compartment with multiple arrays of cell culture chambers, one for each drug concentration. The device is suitable for dynamic cultures and in-chip biological assays. The formation of a gradient was validated using a methylene blue solution and the cell loading was successful. Preliminary biological data on 3D dynamic cultures of stromal cells (bone-marrow mesenchymal stem cells) and breast carcinoma cells (MDA-MB-231) were performed in a commercial microfluidic device. Results showed that Zn eluates had a selective cytotoxic effect for tumoral cells. Indeed, cell migration and cell replication of treated tumoral cells was inhibited. Moreover, the three-dimensionality of the model strongly affected the efficacy of Zn eluates, as 2D preliminary experiments showed a high cytotoxic effect of Zn also for stromal cells, thus confirming that traditional screening tests on 2D cultured cells usually lead to an overestimation of drug efficacy and toxicity. Based on preliminary data, the customized platform could be considered a major advancement in cancer drug screenings as it also allows the rapid and efficient screening of biomaterials having antitumor effect

Background. Total Ankle Replacement (TAR) has become a common surgical procedure for severe Osteoarthritis of the ankle. Unlike hip and knee, current TARs still suffer from high failure rates. A key reason could be their non-anatomical surface geometry design, which may produce unnatural motion and load-transfer characteristics. Current TARs have articular surfaces that are either cylindrical or truncated cone surfaces following the Inman truncated cone concept from more than 60 years ago [1]. Our recent study demonstrated, that the surfaces of the ankle can be approximated by a Saddle-shaped, Skewed, truncated Cone with its apex directed Laterally (SSCL) [2]. This is significantly different than the surface geometry used in current TAR systems. The goal of this study was to develop and test the reliability of an in vitro procedure to investigate the effect of different joint surface morphologies on the kinematics of the ankle and to use it to compare the effect of different joint surface morphologies on the 3D kinematics of the ankle complex. Methodology. The study was conducted on ten cadaver ankle specimens. Image processing software (Analyze Direct. TM. ) was used to obtain 3D renderings of the articulating bones. The 3D bone models were then introduced into engineering design software packages (, Geomagic. TM. and Inventor. TM. ) to produce a set of four custom-fit virtual articular surfaces for each specimen: 1. Exact replica of the natural surfaces; 2. cylindrical; 3. truncated cone with apex oriented medially according to Inman's postulate; and 4. SSCL. The virtual TAR implants were exported to a 3D printing software and 3D physical models of each implant was produced in PLA using 3D printing (Figure 1). The intact cadaver was tested first in a specially design loading and measuring system [3] in which external moments were applied across the ankle in the three planes of motion and the resulting motion was measured through a surgical navigation system (Figure 1). Each of the four customized implant sets were then surgically introduced one at a time and the test was repeated. From the results, the ankle, subtalar and complex kinematics could be compared to that of the intact natural joint. Results and Conclusions. 1. Replacing the natural ankle joint surfaces by artificial exact replicas do not significantly affect the kinematic characteristics thus establishing good reliability of the experimental technique. This high reliability is an important finding proving that the combined factors involved in the process, such as replacing the natural surfaces with artificial replicas and the overall surgical procedure, do not significantly affect the kinematic characteristics of the ankle joint; 2. The SSCL implant produces close to intact joint kinematics (Figure 3), 3. The SSCL produces closer to normal kinematics then TARs with either cylindrical surfaces or those representing a symmetric truncated cone with apex oriented medially (Figure 3). For any figures or tables, please contact authors directly (see Info & Metrics tab above).

Total knee arthroplasty (TKA) is widely accepted as a successful surgical intervention to treat osteoarthritis and other degenerative diseases of the knee. However, present statistics on limited survivorship and patient-satisfaction emphasise the need for an optimal endoprosthetic care. Although, the implant design is directly associated with the clinical outcome comprehensive knowledge on the complex relationship between implant design (morphology) and function is still lacking. The goal of this study was to experimentally analyse the relationship between the trochlear groove design of the femoral component (iTotal CR, ConforMIS, Inc., Bedford, MA, USA) and kinematics in an in vitro test setup based on rapid prototyping of polymer-based replica knee implants. The orientation of the trochlear groove was modified in five different variations in a self-developed computational framework. On the basis of the reference design, one was medially tilted (−2°) and four were laterally tilted (+2°, +4°, +6°, +8°). For manufacturing, we used rapid prototyping to produce synthetic replicates made of Acrylnitril-Butadien-Styrol (ABS) and subsequent post-processing with acetone vapor. The morpho-functional analysis of the replicates was performed in our experimental knee simulator. Tibiofemoral and patellofemoral kinematics were recorded with an optical tracking system during a semi-active flexion/extension (∼10° to 90°) motion. Looking at the results, the patellofemoral kinematics, especially the medial/lateral translation and internal/external rotation were mainly affected. During low flexion, the patella had a more laterally position relative to the femur with increasing lateral trochlear orientation. The internal/external rotation initially differentiated and converged with flexion. Regarding the tibiofemoral kinematics, only the tibial internal/external rotation showed notable differences between the modified replica implants. We presented a workflow for an experimental morpho-functional analysis of the knee and demonstrated its feasibility on the example of the trochlear groove orientation which might be used in the future for comprehensive implant design parameter optimisation, especially in terms of image based computer assisted patient-specific implants

Introduction:. Despite all the attention to new technologies and sophisticated implant designs, imperfect surgical technique remains a obstacle to improving the results of total knee replacement (TKR). On the tibial side, common errors which are known to contribute to post-operative instability and reduced function include internal rotation of the tibial tray, inadequate posterior slope, and excessive component varus or valgus. However, the prevalence of each error in surgeries performed by surgeons and trainees is unknown. The following study was undertaken to determine which of these errors occurs most frequently in trainees acquiring the surgical skills to perform TKR. Materials and Methods:. A total of 43 knee replacement procedures were performed by 11 surgical trainees (surgical students, residents and fellows) in a computerized training center. After initial instruction, each trainee performed a series of four TKR procedures in cadavers (n = 2) and bone replicas (n = 2) using a contemporary TKR instrument set and the assistance of an experienced surgical instructor. Prior to each procedure, computer models of each cadaver and/or bone replica tibia were prepared by reconstructing CT scans of each specimen. All training procedures were performed in a navigated operating room using a 12 camera motion analysis system (Motion Analysis Inc.) with a spatial resolution in all three orthogonal directions of ± 0.15 mm. The natural slope, varus/valgus alignment, and axial rotation of the proximal tibial surface were recorded prior to surgery and after placement of the tibial component. For evaluation of all data, acceptable limits for implantation were defined as: posterior slope: 0–10°; varus/valgus inclination of tibial resection: ± 3°; and external rotation: 0–10°. Results:. The tibial component was implanted with an average posterior slope of 3.4° ± 3.4°. In 83% of trials, the trainees cut the tibia with less posterior slope than intended (average shortfall: 2.0° ± 4.0°). In 14% of cases the tibial resection sloped anteriorly, whereas in another 5% the posterior slope exceeded 10°. The coronal alignment of the tibial osteotomy averaged 0.1° ± 2.9° of valgus, with 19% of components were implanted in more than 3° of valgus vs. 14% varus (>3°). The average rotational orientation of the tibial component was 5.4° ± 5.3° of external rotation. Overall, 21% of components were placed in internal rotation, and a further 29% in more than 10° of external rotation. Rotational malalignment of the tibial component was the most common error in technique encountered in the study population. Conclusion:. 1. Tibial preparation still presents significant difficulty to many less experienced surgeons, despite the use of modern instrumentation and careful didactic instruction. 2. The most prevalent error in tibial preparation in TKR is malrotation of the tibial component, especially in internal rotation. 3. The errors measured in the computerized bioskills lab replicate clinical cases often presenting with symptoms necessitating early revision. 4. Greater attention is needed to training of surgical skills and intraoperative assessment of sources of technical error, such as component position to improve clinical outcomes of TKR

Background: Interfacial gaps between cement and femoral hip implants are a potential source of stem debounding and loosening. We used a CT-scan technique to measure the characteristics of these gaps for two different implant types and two different implantation protocols. Methods: Using a third generation cementing technique, 22 plastic replicas of straight Charnley-Kerboul stems (Stratec) and 18 replicas of anatomic Lubinus SPII stems (Waldemar-Link) were implanted in 20 pairs of embalmed cadaver femora. In each pair of femora, the same stem type was used. However, at one side a stem with the same size as the broach was used (line-to-line), while at the other, we cemented a stem that was one size smaller (undersized). Based on a validated CT-scan measurement tool[. 1. ], we quantified the extent of interfacial gaps, determined their location and measured the cement thickness in areas with and without gaps. Differences in interfacial gaps between both implant types and both implantation techniques were analysed with a general linear model (GLM). Results: In total 10308 connective CT-images were segmented and analysed. Interfacial gaps were found in every specimen (average: 6.43% of the stem surface), but their extent varied widely between specimens (SD: 8.99%; 0.15% – 31.69%). According to a GLM, the quantity of interfacial gaps did not vary significantly between implant types (Kerboul: 7.92±10.69%; Lubinus: 4.61±6.14%, p=0.246) and between implantation techniques (line-to-line: 7.73±10.24%; undersized: 5.13±7.57%, p=0.416). Irrespective of the implant type and the implantation protocol, flat regions of the stem surface showed significantly more interfacial gaps than corner regions (flat: 6.02%; corner: 4.36%; Chi-square: p< 0.001). Overall, more gaps were found at the anterior surface of the implant (anterior: 7.61%; medial: 4.99%; lateral: 4.46%; posterior: 4.43%; Chi-square: p< 0.001). For Kerboul and line-to-line stems, the extent of interfacial gaps increased consistently from the distal to the proximal stem region. This was not true for Lubinus and undersized stems. The thickness of the cement mantle showed no significant differences in areas with and without interfacial gaps (cement thickness: 3.50 mm in gap regions and 3.45 mm in regions without gaps, paired t-test: p=0.823). Conclusions: Interfacial gaps between a femoral hip implant and cement are common and were found in all specimens. As these gaps can be extensive (up to 30 % of the stem surface), they could influence implant stability and survival. The interfacial gaps described here were probably due to air that was introduced along the implant during stem insertion. Further studies are needed to confirm that theory, to determine the consequences of these gaps and to search for methods to prevent them

To determine the mechanisms and extents of popliteus impingements before and after TKA and to investigate the influence of implant sizing. The hypotheses were that (i) popliteus impingements after TKA may occur at both the tibia and the femur and (ii) even with an apparently well-sized prosthesis, popliteal tracking during knee flexion is modified compared to the preoperative situation. The location of the popliteus in three cadaver knees was measured using computed tomography (CT), before and after implantation of plastic TKA replicas, by injecting the tendon with radiopaque liquid. The pre- and post-operative positions of the popliteus were compared from full extension to deep flexion using normosized, oversized and undersized implants (one size increments). At the tibia, TKA caused the popliteus to translate posteriorly, mostly in full extension: 4.1mm for normosized implants, and 15.8mm with oversized implants, but no translations were observed when using undersized implants. At the femur, TKA caused the popliteus to translate laterally at deeper flexion angles, peaking between 80º-120º: 2.0 mm for normosized implants and 2.6 mm with oversized implants. Three-dimensional analysis revealed prosthetic overhang at the postero-superior corner of normosized and oversized femoral components (respectively, up to 2.9 mm and 6.6 mm). A well-sized tibial component modifies popliteal tracking, while an undersized tibial component maintains more physiologic patterns. Oversizing shifts the popliteus considerably throughout the full arc of motion. This study suggests that both femoro- and tibio-popliteus impingements could play a role in residual pain and stiffness after TKA

A large number of total hip arthroplasties (THA) are performed each year, of which 60 % use cementless femoral fixation. This means that the implant is press-fitted in the bone by hammer blows. The initial fixation is one of the most important factors for a long lasting fixation [Gheduzzi 2007]. It is not easy to obtain the point of optimal initial fixation, because excessively press-fitting the implant by the hammer blows can cause peak stresses resulting in femoral fracture. In order to reduce these peak stresses during reaming, IMT Integral Medizintechnik (Luzern, Switzerland) designed the Woodpecker, a pneumatic reaming device using a vibrating tool. This study explores the feasibility of using this Woodpecker for implant insertion and detection of optimal fixation by analyzing the vibrational response of the implant and Woodpecker. The press-fit of the implant is quantified by measuring the strain in the cortical bone surrounding the implant. An in vitro study is presented. Two replica femur models (Sawbones Europe AB, Malmo Sweden) were used in this study. One of the femur models was instrumented with three rectangular strain gauge rosettes (Micro-Measurements, Raleigh, USA). The rosettes were placed medially, posteriorly and anteriorly on the proximal femur. Five paired implant insertions were performed on both bone models, alternating between standard hammer blow insertions and using the Woodpecker. The vibrational response was measured during the insertion process, at the implant and Woodpecker side using two shock accelerometers (PCB Piezotronics, Depew, NY, USA). The endpoint of insertion was defined as the point when the static strain stopped increasing. Significant trends were observed in the bandpower feature that was calculated from the vibrational spectrum at the implant side during the Woodpecker insertion. The bandpower is defined as the percentage power of the spectrum in the band 0–1000 Hz. Peak stress values calculated from the strain measurement during the insertion showed to be significantly (p < 0.05) lower at two locations using the Woodpecker compared to the hammer blows at the same level of static strain. However, the final static strain at the endpoint of insertion was approximately a factor two lower using the Woodpecker compared to the hammer. A decreasing trend was observed in the bandpower feature, followed by a stagnation. This point of stagnation was correlated with the stagnation of the periprosthetic stress in the bone measured by the strain gages. The behavior of this bandpower feature shows the possibility of using vibrational measurements during insertion to assess the endpoint of insertion. However it needs to be taken into account that it was not possible to reach the same level of static strain using the Woodpecker as with the hammer insertion. This could mean that either extra hammer blows or a more powerful pneumatic device could be needed for proper implant insertion

Introduction. While fixation on the acetabular side in resurfacing implants has been uncemented, the femoral component is usually cemented. The most common causes for early revision in hip resurfacing are femoral head and or neck fractures and aseptic loosening of the femoral component. Later failures appear to be more related to adverse soft-tissue reactions due to metal wear. Little is known about the effect of cementing techniques on the clinical outcome in hip resurfacing, since retrieval analysis of failed hip resurfacing show large variations. Two cementing techniques have dominated. The indirect low viscosity (LV) technique as for the Birmingham Hip resurfacing (BHR) system and the direct high viscosity (HV) technique as for the Articular Surface replacement (ASR) system. The ASR was withdrawn from the market in 2010 due to inferior short and midterm clinical outcome. This study presents an in vitro experiment on the cement mantle parameters and penetration into ASR resurfaced femoral heads comparing both techniques. Methods. Five sets of paried frozen cadavar femura (3 male, 2 female) were used in the study. The study was approved by ethics committee. Plastic ASR replicas (DePuy, Leeds, UK), femoral head size 47Ø were used. The LV technique was used for the right femora (Group A, fig. 1 and 3) while the HV technigue was used for the left femora (Group B. Fig 2 and 4). The speciments were cut into quadrants. An initiial visual, qualitative evaluation was followed by CT analysis of cement mantle thickness and cement penetration into bone. Results. No significant differences were seen between the four quadrants within each group. The LV technigue resulted in greater cement penetration and increased cement mantle under the top proximally. The HV technique showed less penetration and lower cement mantle. See figures 1–4. Discussion. The aim was to analyze the effect of the cementing techniques used in hip resurfacing practice. The ASR implant was chosen to improve understanding of whether the implant may have been sensitive to cementing techniques and whether an analysis of cementing with the recommended HV technique may assist in explaning the high incidence of short-term ASR revisions due to fractures. Findings for the HV technigue would indicate a superior technique according to consensus in conventional arthropalsty However, this contradicts clinical evidence on resurfacing, where LV cementation has been shown tho be superior. The superficial intergration in the HV technigue may result in only a superficial integration and subsequently suboptimal fixation to bone. To view tables/figures, please contact authors directly

Summary Statement. We are taking very expensive cutting edge technology, usually reserved for industry, and using it with the help of open source free software and a cloud 3D printing services to produce custom and anatomically unique patient individual implants for only £32. This is approx. 1/100. th. of the traditional cost of implant production. Introduction. 3D printing and rapid prototyping in surgery is an expanding technology. It is often used for preoperative planning, procedure rehearsal and patient education. There have been recent advances in orthopaedic surgery for the development of patient specific guides and jigs. The logical next step as the technology advances is the production of custom orthopaedic implants. Our aim was to use freely available open source software, a personal computer and consumer access online cloud 3D printing services to produce an accurate patient specific orthopaedic implant without utilising specialist expertise, capital expenditure on specialist equipment or the involvement of traditional implant manufacturing companies. This was all to be done quickly, cost effectively and in department. Methods & Materials. Using standard computed tomography (CT) scan and the standard file format of digital imaging and communications in medicine (DICOM) data, a 3D surface reconstruction was made of a cadaveric radial head using the software OsiriX (DICOM image processing software for Apple OS X). This data was then processed in Meshlabs (a system for the processing and editing of unstructured 3D triangular meshes) to create a mirror image 3D model of the radial head with a stem added to produce prosthesis suitable to replace the contra lateral radial head. Both packages are distributed under open-source licensing—Lesser General Public Licence (LGPL)—and are therefore free. This was then uploaded and 3D printed using a process of selective laser sintering (SLS) in stainless steel via the commercial cloud printing service . Shapeways.com. . Results & Conclusions. The model produced was an accurate mirror image replica of the patient's original anatomy (all measurements equal +/− 0.2mm using TS411212 Digital Vernier Expert Caliper 300mm P=0.001 Showing no significant statistical difference. Production from original CT scan took a total of 10 days and the total cost including shipping was £32. This was then re-implanted in to the contra lateral cadaveric radius. We achieved our aims and goals of quick, cost effective and accurate implant creation

Introduction. Although the “learning curve” in surgical procedures is well recognized, little data exists documenting the accuracy of surgeons in performing individual steps of orthopedic procedures. In this study we have used a validated computer-based training system to measure variations instrument placement and alignment in TKA, specifically those relating to tibial preparation. Methods. Eleven trainees (surgical students, residents and fellows) were recruited to perform a series of 43 knee replacement procedures in a computerized training center. After initial instruction, each trainee performed a series of four TKA procedures in cadavers (n=2) and bone replicas (n=2) using a contemporary TKA instrument set and the assistance of an experienced surgical instructor. The Computerized Bioskills system was utilized to monitor the placement and orientation of the proximal tibial osteotomy and the tibial tray. Results. The tibial component was implanted with an average posterior slope of 3.2°±2.7°. In 14% of cases the tibial resection sloped anteriorly, and in another 5%, the posterior slope exceeded 10°. In 83% of trials, the trainees cut the tibia with less posterior slope than intended, ranging from −10.0° to +5.6° (average:−2.0°±4.0°). The average rotational orientation of the tibial component was 5.4°±5.3°of external rotation, however individual values ranged from 7.6°of int rot to 14.4°of ext rot. Overall, 19% of components were placed in internal rotation. Conclusions. Tibial preparation still presents significant difficulty to many less experienced surgeons, despite the use of modern instrumentation and careful didactic instruction. The errors measured in the computerized bioskills lab unfortunately replicate clinical cases often presenting with symptoms necessitating early revision,. Greater attention is needed to training of surgical skills and intraoperative assessment of component position to improve clinical outcomes of TKA

AIM: Chronic osteomyelitis is a difficult to treat infection requiring prolonged antimicrobial therapy and involving systems of local antimicrobial delivery. Linezolid is a new antimicrobial agent with well documented in vitro activity against gram positive cocci when resistance to other antistaphylococcal agents is present. Few data are present regarding its embedding in local antimicrobial delivery systems and subsequent elution. The elution of linezolid by a polylactic acid (PLA) system was studied. METHODS: Linezolid was dry-mixed with PLA at a ratio of 1:9, ie 50mg of linezolid were mixed with 450mg PLA. The mixture was diluted with 0,5mL of methanol and placed at the bottom of a cylindrical vial. Two replicas were created and one mL of Mueller-Hinton broth was added over the free solid surface of each mixture. Vials were transferred to a 37°C incubator and broth was replaced every 48h for 11 days. Concentration of linezolid was determined by an HPLC method using a Zorbax Eclipse XDB-C8 column and UV detection. RESULTS: Mean linezolid concentration at days 1, 3, 5, 7, 9 and 11 was 2778.54 mg/L, 2456.22 mg/L, 668.63 mg/L, 324.86 mg/L, 390.10 mg/L, and 155.28 mg/L respectively. CONCLUSION: Elution of linezolid by a PLA local delivery system remains very high throughout the period studied. The results are promising for the therapy of staphylococcal chronic osteomyelitis with the use of a PLA local antimicrobial delivery system employing linezolid

The concept of non-anatomic reversed arthroplasty is becoming increasingly popular. The design medializes and stabilizes the center of rotation, and lowers the humerus relative to the acromion, and lengthens the deltoid muscle up to 18%. Such a surgically created global distraction of muscles is likely to affect nervous structures. When nerves are stretched up to 5–10%, axonal transport and nerve conduction starts to be impaired. At 8% of elongation, venous blood flow starts to diminish and at 15% all circulation in and out of the nerve is obstructed. [. 1. ] To understand nerve dynamics following reversed arthroplasty, we investigated nerve strain and excursion in a cadaver model. In a formalin-embalmed female cadaver specimen, the brachial plexus en peripheral upper limb nerves were carefully dissected and injected with an iodine containing contrast medium. At the same time 1.2 mm-diameter leaded markers were implanted at topographically crucial via points for later enhanced recognition on CT reconstructions. After the first session of CT scanning a plastic replica of the Delta reversed shoulder prosthesis® was surgically placed followed by re-injection of the plexus with the same solution. The preoperative and the postoperative specimen were studied using a helical CT scan with a 0,5 mm slice increment. The Mimics® (Materialise NV, Belgium) software package was used for visualization and segmentation of CT images and 3D rendering of the brachial plexus and peripheral nerves. After surgery, there was an average increase in nerve strain below physiologically relevant amplitudes. In a few local segments of the brachial plexus an increase in nerve strain exceeding 5–10 % was calculated. The largest increase in strain (up to 19%) was observed in a segment of the medial cord. These results suggest there might be a clinically relevant increase in nerve strain following reversed shoulder arthroplasty

Introduction: The cement mantle is a critical factor in the longevity of cemented total hip arthroplasty (THA). Concern has been raised about the reliability of plain radiographs for its assessment. A new high-definition, three-dimensional (3-D), in vitro method of cement mantle evaluation has been developed. Aim: To compare cement mantle quality in six contemporary stem designs. Methods: Exact resin replicas of six contemporary stem designs were implanted into cadaver femora using third generation techniques. The specimens were imaged with a high-speed, helical, computerised, tomographic scanner. Computer-assisted, 3-D analysis of the cement mantle thickness was made. Comparisons were made between different stem designs and also with plain film assessments of the mantles. Results: Standard radiographs overestimated mantle thickness (p< 0.05) and underestimated the deficiencies. The percentage area of cement mantle that was thinner than 2mm ranged from 9% to 28%. Slight malrotation or malalignment of the stem with respect to the broach envelope produced deficient mantles. Characteristic patterns of deficiencies were seen for different stem designs. Conclusions: Plain x-rays overestimated the cement thickness, frequently missed areas of substandard cement, and should, therefore, be interpreted cautiously. The cement mantle varies widely depending on the stem design and surgical technique, and commonly used designs have significant deficiencies in their mantles by standard criteria despite proper surgical technique. Surgeons should be familiar with the stem that they use and its instrumentation to maximise outcomes. This is a valuable technique for the study of the cement mantle as it relates to implant design, surgical technique and patient anatomy

Summary Statement. Uptake of robotically-assisted orthopaedic surgery may be limited by a perceived steep learning curve. We quantified the technological learning curve and 5 surgeries were found to bring operating times to appropriate levels. Implant positioning was as planned from the outset. Introduction. Compared to total knee replacement, unicondylar knee replacement (UKR) has been found to reduce recovery time as well as increase patient satisfaction and improve range of motion. However, contradictory evidence together with revision rates concern may have limited the adoption of UKR surgery. Semi-active robotically-assisted orthopaedic tools have been developed to increase the accuracy of implant position and subsequent mechanical femorotibial angle to reduce revision rates. However, the perceived learning curve associated with such systems may cause apprehension among orthopaedic surgeons and reduce the uptake of such technology. To inform this debate, we aimed to quantify the learning curve associated with the technological aspects of the NavioPFS™ (Blue Belt Technologies Inc., Pittsburgh, USA) with regards to both operation time and implant accuracy. Methods. Five junior orthopaedic trainees volunteered for the study following ethical permission. All trainees attended the same initial training session and subsequently each trainee performed 5 UKR surgeries on left-sided synthetic femurs and tibiae (model 1146–2, Sawbones-Pacific Research Laboratories Inc, Vashon, WA, USA). A few days lapsed between surgeries, which were all completed in a two week window. Replica Tornier HLS Uni Evolution femoral and tibial implants (Tornier, France) were implanted without cementation. Each surgery was videoed and timings taken for key operation phases, as well as the overall operative time. A ball point probe with four reflective spherical markers attached was used to record the position of manufactured divots on the implant, which allowed the 3D position of the implant to be compared to the planned position. Absolute translational and rotational deviations from the planned position were analysed. Results. Total surgical time decreased significantly with surgery number (p < 0.001) from an initial average of 85 minutes to 48 minutes after 5 surgeries. All stages, except the cutting tool set up, demonstrated a significant difference in operative time with increasing number of surgeries performed (all p < 0.05) with the cutting phase decreasing from 41 to 23 minutes (p < 0.001). The translational and rotational accuracy of the implants did not significantly vary with surgery number. Discussion and Conclusion. The accuracy in implant position obtained by trainee surgeons on synthetic bones were similar to published data for experienced orthopaedic surgeons on other systems on cadavers. Whilst cadaver operations increase the complexity of operation, this should not theoretically affect the robotic system in preventing innaccurate implantation. Moreover, the fact that this accuracy was obtainable on the first surgery clearly demonstrates the system's ability in ensuring accurate implantation. Five surgeries dramatically reduced the total operative time, and moreover, the trend suggests that more surgeries would further decrease the total operation time. It was not the intention of the study to compare absolute trainee times on synthetic bones to surgeons with cadavers, but the learning curve of the protocol and technology suggests a halving of the operation time after 5 sessions would not be unrealistic