Foot pain and related problems are quite common in the community. It is reported that 24% of individuals older than 45 experienced foot pain. Also, it is stated that at least two thirds of individuals experiences moderate physical disability due to foot problems. In the absence of evaluation of risk factors such as limited ankle dorsiflexion in the early period of the diseases (Plantar fasciitis, Achilles Tendinopathy e.g.) and the lack of mobile systems with portable remote access, foot pain becomes refractory/chronic foot pain, secondary pathologies and ends with workload of 1., 2. and 3rd level healthcare services. In the literature, manuel and dijital methods have been used to analyze the ankle range of motion (ROM). These studies are generally based on placing protractors on the image and / or angle detection from inclination measurement by using the gyroscope sensor of the mobile device. Some of these applications are effective and they are designed to be suitable for measuring in a clinical setting by a physician or physiotherapist. To the best of our knowledge, there is no system developed to measure real-time ankle ROM remotely with collaboration of the patients. In this research, we proposed to develop an ankle ROM analyze system with smart phone application that can be used comfortably by subjects. We present a case of a 22-year-old male with a symptomatic pes planus. The mobile application, which was used for data collection, was designed and implemented for Android devices. Initially, before the mobile application home page is opened, a consent page was submitted to the acceptance of individual within the scope of Law (KVKK) data privacy. Then, the participant was asked to state his sociodemographic characteristics [age, gender, height, weight] and dominant side. No history of foot-ankle injury, trauma, and surgery was recorded. Activity pain of the foot was 6 according to visual anolog scale (VAS) in the mobile application. His ankle dorsiflexion was 15 ° by manuel goniometer. Besides, server was responsible for storing the collected data and ROM measurement. ROM was calculated by processing the foot video which was sent through the mobile application. During the processing phase, a segmentation model was used which was trained with image process and deep learning methods. With the developed system, we obtained the manual goniometric measurement result with 2 degrees deviation. As the application is calibrated, it is expected to approach the actual measurement of ROM. We can conclude that mobile app-goniometer result in dorsiflexion measurement is a novel promising evaluation method for ankle ROM. it will be easy and practical to detect and monitor risk factor of the diseases, decrease medical costs, provide health services in rural areas, and contribution to life quality and to reduce the workload on physicians and physiotherapist

Intraoperative range of motion (ROM) radiographs are routinely taken during scaphoidectomy and four corner fusion surgery (S4CF) at our institution. It is not known if intraoperative ROM predicts postoperative ROM. We hypothesize that patients with a greater intra-operativeROM would have an improved postoperative ROM at one year, but that this arc would be less than that achieved intra- operatively. We retrospectively reviewed 56 patients that had undergone S4CF at our institution in the past 10 years. Patients less than 18, those who underwent the procedure for reasons other than arthritis, those less than one year from surgery, and those that had since undergone wrist arthrodesis were excluded. Intraoperative ROM was measured from fluoroscopic images taken in flexion and extension at the time of surgery. Patients that met criteria were then invited to take part in a virtual assessment and their ROM was measured using a goniometer. T-tests were used to measure differences between intraoperative and postoperative ROM, Pearson Correlation was used to measure associations, and linear regression was conducted to assess whether intraoperative ROM predicts postoperative ROM. Nineteen patients, two of whom had bilateral surgery, agreed to participate. Mean age was 54 and 14 were male and 5 were male. In the majority, surgical indication was scapholunate advanced collapse; however, two of the participants had scaphoid nonunion advanced collapse. No difference was observed between intraoperative and postoperative flexion. On average there was an increase of seven degrees of extension and 12° arc of motion postoperatively with p values reaching significance Correlation between intr-operative and postoperative ROM did not reach statistical significance for flexion, extension, or arc of motion. There were no statistically significant correlations between intraoperative and postoperative ROM. Intraoperative ROM radiographs are not useful at predicting postoperative ROM. Postoperative extension and arc of motion did increase from that measured intraoperatively

As the field of hip arthroscopy continues to develop, functional measures and testing become increasingly important in patient selection, managing patient expectations prior to surgery, and physical readiness for return to athletic participation. The Hip Sport Test (HST) was developed to assess strength, coordination, agility, and range of motion prior to and following hip arthroscopy as a functional assessment. However, the relationship between HST and hip strength, range of motion, and hip-specific patient reported outcome (PRO) measures have not been investigated. The purpose of this study was to evaluate the correlation between the HST scores and measurements of hip strength and range of motion prior to undergoing hip arthroscopy. Between September 2009 and January 2017, patients aged 18-40 who underwent primary hip arthroscopy for the treatment of femoroacetabular impingement with available pre-operative HST, dynamometry, range of motion, and functional scores (mHHS, WOMAC, HOS-SSS) were identified. Patients were excluded if they were 40 years old, had a Tegner activity score < 7, or did not have HST and dynamometry evaluations within one week of each other. Muscle strength scores were compared between affected and unaffected side to establish a percent difference with a positive score indicating a weaker affected limb and a negative score indicating a stronger affected limb. Correlations were made between HST and strength testing, range of motion, and PROs. A total of 350 patients met inclusion criteria. The average age was 26.9 ± 6.5 years, with 34% females and 36% professional athletes. Total and component HST scores were significantly associated with measure of strength most strongly for flexion (rs = −0.20, p < 0 .001), extension (rs = −0.24, p<.001) and external rotation (rs = −0.20, p < 0 .001). Lateral and diagonal agility, components of HST, were also significantly associated with muscle strength imbalances between internal rotation versus external rotation (rs = −0.18, p=0.01) and flexion versus extension (rs = 0.12, p=0.03). In terms of range of motion, a significant correlation was detected between HST and internal rotation (rs = −0.19, p < 0 .001). Both the total and component HST scores were positively correlated with pre-operative mHHS, WOMAC, and HOS-SSS (p<.001 for all rs). The Hip Sport Test correlates with strength, range of motion, and PROs in the preoperative setting of hip arthroscopy. This test alone and in combination with other diagnostic examinations can provide valuable information about initial hip function and patient prognosis

Aims. In computer simulations, the shape of the range of motion (ROM) of a stem with a cylindrical neck design will be a perfect cone. However, many modern stems have rectangular/oval-shaped necks. We hypothesized that the rectangular/oval stem neck will affect the shape of the ROM and the prosthetic impingement. Methods. Total hip arthroplasty (THA) motion while standing and sitting was simulated using a MATLAB model (one stem with a cylindrical neck and one stem with a rectangular neck). The primary predictor was the geometry of the neck (cylindrical vs rectangular) and the main outcome was the shape of ROM based on the prosthetic impingement between the neck and the liner. The secondary outcome was the difference in the ROM provided by each neck geometry and the effect of the pelvic tilt on this ROM. Multiple regression was used to analyze the data. Results. The stem with a rectangular neck has increased internal and external rotation with a quatrefoil cross-section compared to a cone in a cylindrical neck. Modification of the cup orientation and pelvic tilt affected the direction of projection of the cone or quatrefoil shape. The mean increase in internal rotation with a rectangular neck was 3.4° (0° to 7.9°; p < 0.001); for external rotation, it was 2.8° (0.5° to 7.8°; p < 0.001). Conclusion. Our study shows the importance of attention to femoral implant design for the assessment of prosthetic impingement. Any universal mathematical model or computer simulation that ignores each stem’s unique neck geometry will provide inaccurate predictions of prosthetic impingement. Cite this article: Bone Joint Res 2021;10(12):780–789

Aims. We aimed to assess the reliability and validity of OpenPose, a posture estimation algorithm, for measurement of knee range of motion after total knee arthroplasty (TKA), in comparison to radiography and goniometry. Methods. In this prospective observational study, we analyzed 35 primary TKAs (24 patients) for knee osteoarthritis. We measured the knee angles in flexion and extension using OpenPose, radiography, and goniometry. We assessed the test-retest reliability of each method using intraclass correlation coefficient (1,1). We evaluated the ability to estimate other measurement values from the OpenPose value using linear regression analysis. We used intraclass correlation coefficients (2,1) and Bland–Altman analyses to evaluate the agreement and error between radiography and the other measurements. Results. OpenPose had excellent test-retest reliability (intraclass correlation coefficient (1,1) = 1.000). The R. 2. of all regression models indicated large correlations (0.747 to 0.927). In the flexion position, the intraclass correlation coefficients (2,1) of OpenPose indicated excellent agreement (0.953) with radiography. In the extension position, the intraclass correlation coefficients (2,1) indicated good agreement of OpenPose and radiography (0.815) and moderate agreement of goniometry with radiography (0.593). OpenPose had no systematic error in the flexion position, and a 2.3° fixed error in the extension position, compared to radiography. Conclusion. OpenPose is a reliable and valid tool for measuring flexion and extension positions after TKA. It has better accuracy than goniometry, especially in the extension position. Accurate measurement values can be obtained with low error, high reproducibility, and no contact, independent of the examiner’s skills. Cite this article: Bone Joint Res 2023;12(5):313–320

Abstract. Objectives. Impingement in total hip replacements (THRs), including bone-on-bone impingement, can lead to complications such as dislocation and loosening. The aim of this study was to investigate how the location of the anterior inferior iliac spine (AIIS) affected the range of motion before impingement. Methods. A cohort of 25 CT scans (50 hips) were assessed and nine hips were selected with a range of AIIS locations relative to the hip joint centre. The selected CT Scans were converted to solid models (ScanIP) and THR components (DePuy Synthes) were virtually implanted (Solidworks). Flexion angles of 100⁰, 110⁰, and 120⁰ were applied to the femur, each followed by internal rotation to the point of impingement. The lateral, superior and anterior extent of the AIIS from the Centre of Rotation (CoR) of the hip was measured and its effect on the range of motion was recorded. Results. There was found to be a significant (p<0.05) inverse relationship between the ROM of the THR and the lateral measure of the AIIS. Of the three measures, the lateral AIIS measure showed the strongest relationship with ROM to impingement (R=0.73) with the anterior and superior measures resulting in R values of 0.41 and 0.56 respectively. For every millimetre lateral the AIIS location, there was typically a loss of 1.2° of range of motion. With increasing lateralisation, the AIIS was positioned more directly over the femur, thereby reducing the ROM in the THR during high flexion positions. No soft tissue was included in the models which would have affected the ROM. Conclusions. The results from this study have shown that the lateral measure of the AIIS could be a predictor for bone-on-bone impingement. To build confidence, wider study of AIIS location variation is needed, as well as analysis under impingement prone activities of daily living. Declaration of Interest. (b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project

There are a variety of sizes currently available for reverse total shoulder arthroplasty (RTSA) implant systems. Common sizing options include a smaller 36 to 38 mm or a larger 40 to 42 mm glenosphere, and are typically selected based on surgeon preference or patient size. Previous studies have only evaluated the abduction and adduction range of motion within a single plane of elevation, providing a limited view of the joint's possible range of motion. The purpose of this study was to use computer modeling to evaluate the abduction and adduction range of motion across multiple planes of elevation for a range of glenosphere sizes. Computed tomography images of four cadaveric specimens (age: 54 ± 24 years) were used to obtain the osseous anatomy to be utilised in the model. Solid-body motion studies of the RTSA models were constructed with varying glenosphere diameters of 33, 36, 39, 42, and 45 mm in Solidworks (Dassault Systems, US). The implant components were scaled, while maintaining a consistent centre of rotation. Simulations encompassing the full range of abduction and adduction were conducted for the planes of elevation between −15˚ and 135˚ at 15˚ intervals, with the motion of the humerus being constrained in neutral internal-external rotation throughout all planes. Angles of elevation were obtained utilising the humeral long axis and the RTSA centre of rotation. Statistical analysis was performed using repeated measures ANOVA. Glenosphere diameter was found to significantly affect the adduction range of motion (p=0.043), in which the largest size provided approximately 17˚ more adduction range of motion than the smallest. However, abduction range of motion was not found to be significantly affected through the alteration of glenosphere size (p=0.449). The plane of elevation was not found to significantly affect abduction or abduction (p=0.585 & p=0.225, respectively). Increasing glenosphere diameter resulted in an increased adduction range of motion when averaged across the tested planes of elevation; however the observed influence on abduction was not significant. These are similar to the trends observed in the previous single plane of elevation studies. These findings illustrate the importance of implant sizing related to range of motion. Further studies are required to determine the influence of glenosphere size on internal and external range of motion

Range of Motion (ROM) assessments are routinely used during joint replacement to evaluate joint stability before, during and after surgery to ensure the effective restoration of patient biomechanics. This study aimed to quantify axial torque in the femur during ROM assessment in total hip arthroplasty to define performance criteria against which hip instruments can be verified. Longer term, this information may provide the ability to quantitatively assess joint stability, extending to quantitation of bone preparation and quality. Joint loads measured with strain-gaged instruments in five cadaveric femurs prepared using posterior approach were analysed. Variables such as surgeon-evaluator, trial offset and specimen leg and weight were used to define 13 individual setups and paired with surgeon appraisal of joint tension for each setup. Peak torque loads were then identified for specific motions within the ROM assessment. The largest torque measured in most setups was observed during maximum extension and external rotation of the joint, with a peak torque of 13Nm recorded in a specimen weighing 98kg. The largest torque range (19.4Nm) was also recorded in this specimen. Other motions within the trial reduction showed clear peaks in applied torque but with lower magnitude. Relationships between peak torque, torque range and specimen weight produced an R2 value greater than 0.65. The data indicated that key influencers of torsional loads during ROM were patient weight, joint tension and limb motion. This correlation with patient weight should be further investigated and highlights the need for population representation during cadaveric evaluation. Although this study considered a small sample size, consistent patterns were seen across several users and specimens. Follow-up studies should aim to increase the number of surgeon-evaluators and further vary specimen size and weight. Consideration should also be given to alternative surgical approaches such as the Direct Anterior Approach

Nearly one quarter of ankle fractures have a recognized syndesmosis injury. An intact syndesmosis ligament complex stabilizes the distal tibio-fibular joint while allowing small, physiologic amounts of relative motion. When injured, malreduction of the syndesmosis has been found to be the most important independent factor that contributes to inferior functional outcomes. Despite this, significant variability in surgical treatment remains. This may be due to a poor understanding of normal dynamic syndesmosis motion and the resultant impact of static and dynamic fixation on post-injury syndesmosis kinematics. As the syndesmosis is a dynamic structure, conventional CT static images do not provide a complete picture of syndesmosis position, giving potentially misleading results. Dynamic CT technology has the ability to image joints in real time, as they are moved through a range-of-motion (ROM). The aim of this study was to determine if syndesmosis position changes significantly throughout ankle range of motion, thus warranting further investigation with dynamic CT. This is an a priori planned subgroup analysis of a larger multicentre randomized clinical trial, in which patients with AO-OTA 44-C injuries were randomized to either Tightrope or screw fixation. Bilateral ankle CT scans were performed at 1 year post-injury, while patients moved from maximal dorsiflexion (DF) to maximal plantar flexion (PF). In the uninjured ankles, three measurements were taken at one cm proximal to the ankle joint line in maximal DF and maximal PF: Anterior (ASD), middle (MSD), and posterior (PSD) syndesmosis distance, in order to determine normal syndesmosis position. Paired samples t-tests compared measurements taken at maximal DF and maximal PF. Twelve patients (eight male, six female) were included, with a mean age of 44 years (±13years). The mean maximal DF achieved was 1-degree (± 7-degrees), whereas the mean maximal PF was 47-degrees (± 8-degrees). The ASD in DF was 3.0mm (± 1.1mm) versus 1.9mm (± 0.8mm) in PF (p<0.01). The MSD in DF was 3.3mm (±1.1mm) versus 2.3mm (±0.9mm) in PF (p<0.01). The PSD in DF was 5.3mm (±1.5mm) versus 4.6mm (±1.9mm) in PF (p<0.01). These values are consistent with the range of normal parameters previously reported in the literature, however this is the first study to report the ankle position at which these measurements are acquired and that there is a significant change in syndesmosis measurements based on ankle position. Normal syndesmosis position changes in uninjured ankles significantly throughout range of motion. This motion may contribute to the variation in normal anatomy previously reported and controversies surrounding quantifying anatomic reduction after injury, as the ankle position is not routinely standardized, but rather static measurements are taken at patient-selected ankle positions. Dynamic CT is a promising modality to quantify normal ankle kinematics, in order to better understand normal syndesmosis motion. This information will help optimize assessment of reduction methods and potentially improve patient outcomes. Future directions include side-to-side comparison using dynamic CT analysis in healthy volunteers

Introduction. The reliability of currently available proximal humeral fracture classi?cation systems has been shown to be poor, giving rise to the question whether a more objective measure entails improved predictability of surgical outcome. This study aims to apply a novel software system to predict the functional range of motion of the glenohumeral joint after proximal humeral fracture. Method. Using a validated system that simulates bone-determined range of motion of spheroidal joints such as the shoulder joint, we categorically analysed a consecutive series of 79 proximal humeral fractures. Morphological properties of the proximal humerus fractures were related to simulated bone-determined range of motion. Results. The interobserver variability of range of motion assessment using our system showed excellent agreement (0.798). Maximal glenohumeral abduction and forward ?exion of intra-articular fractures were 34.3±6.6 SE and 60.7±12.4 SE degrees. For fractures with a displaced greater tuberosity abduction was 75.0±5.9 SE and forward flexion was 118.2±4.9 SE degrees, whilst for fractures where both tuberosities had been displaced they were 60.0±10.9 SE and 69.6±13.4 SE degrees respectively. For non-intra articular fractures without displaced tuberosities movements were 89.3±3.3 SE and 122.6±3.4 SE degrees respectively. The head inclination angle was positively correlated with maximum abduction (0.362, p = 0.014). Offset was negatively correlated with maximum abduction, but not statistically signi?cant (0.834, p = 0.087). Conclusion. This study has demonstrated a novel and effective tool allowing the prediction of functional motion after proximal humeral fracture based on bone anatomy. The study demonstrates that intra-articular fractures generally have the worst prognosis with regards to bone-determined ROM. Fractures with displaced tuberosities show more motion limitations for abduction than for forward ?exion. A reduced head inclination angle is a strong predictor of limited bone-determined range of motion for all types of proximal humerus fractures

Introduction: Cervical range of motion is affected by a wide variety of pathologies and is routinely measured in clinical assessment of the neck. It is therefore crucial to use a method that is both accurate and reliable but that is also non-invasive and inexpensive. This study assessed cervical range of motion using different methods of measurement, namely the universal goniometer and the cervical range of motion (CROM) goniometer. These methods were then compared with each other. In addition, we were interested in determining whether a single component of neck movement is representative of total cervical range of motion. Methods: 50 healthy subjects between the ages of 18–87 with no shoulder or spine pathology were asked to perform six active neck movements, flexion, extension, lateral flexion and axial rotation while the movements were measured first using the universal goniometer and then with the CROM goniometer. The CROM goniometer has been shown previously to have excellent validity and reliability. The researchers were trained to use the measuring techniques prior to data collection. All measurements were performed by the same researcher for each subject and the two researchers alternated between subjects. Results: Comparison between the universal goniometer and the CROM goniometer was performed using Bland and Altman plots. This revealed that 60.6% of universal goniometer readings were within ±5° of the CROM reading; however 31.6% of readings differed by > ±5° and 7.8% differed by > ±10°. The interobserver variance was calculated and there was excellent agreement between the two researchers for both the universal goniometer and CROM goniometer, with an intraclass correlation coefficient of ≥0.80 for every movement. Extension was the most predictive of total neck movement (Pearson coefficient 0.643, p < 0.001). This continues to be the case even when the negative effect of age on range of motion is taken into account. Discussion: The finding that extension was the most representative neck movement has implications for the assessment of cervical motion. Accordingly, if a single neck movement is measured to represent total range of motion, extension should be used. The comparison between the CROM and universal goniometer demonstrated that the majority of goniometer readings were within 5° of the CROM result; however, this was not consistently the case. Given that the CROM is a valid and reliable method of measuring neck movement, the inconsistency between the goniometer and CROM can be taken as inaccuracy on the part of the universal goniometer. As the interobserver variance is excellent one can assume that these results are reproducible and that the errors observed are a true reflection of the limitations of the device

Introduction: Subject to recent literature citing a reduction in ankle range of motion predisposing to ankle fractures in children, we decided prospectively to analyse the passive range of motion in children presenting to our fracture clinic with simple distal radial metaphyseal fractures treated conservatively in cast. The range of motion was assessed by two observers, and measured using a goniometer in 80 patients. (42 radial fractures and 38 controls) The controls were recruited from children presenting with lower limb injuries and with no prior history of an upper limb injury or neuromuscular condition. The fractures were as a result of simple falls onto the outstretched hand with definite radiological and clinical findings. The range of motion in the contralateral limb was assessed. Both groups showed an equal distribution of dominant and non-dominant limbs. Results: Both groups were well matched with an average age of 10 and 10.3 years fracture group and control group respectively, and gender 55% male fracture group and 52.5% control group. The m injured group showed a passive range of motion of 1680, whereas the control group showed a higher range of motion of 1820, a difference of 140 (p< . 005 student t-test). A third blinded independent observer of 20 children assessed Intra and interobserver error, and no observer was noted to have higher or lower readings. Conclusion: Children with radial fractures have a lower passive range of motion of their wrists than Controls. This may contribute to the aetiology of wrist fractures in a paediatric population. An possible explanation may be as cited in original work that children who sustain fractures have less mobility around their joints due to reduced elasticity in their musculoskeletal framework. Simple passive stretching of fracture prone joints should therefore be advised

Introduction. Sheffield Children's Hospital specialises in limb lengthening for children. Soft tissue contracture and loss of range of motion at the knee and ankle are common complications. This review aims to look at therapeutic techniques used by the therapy team to manage these issues. Materials & Methods. A retrospective case review of therapy notes was performed of femoral and tibial lengthening's over the last 3 years. Included were children having long bone lengthening with an iIntramedullary nail, circular frame or mono-lateral rail. Patients excluded were any external fixators crossing the knee/ankle joints. Results. 20 tibial and 25 femoral lengthening's met the inclusion criteria. Pathologies included, complex fractures, limb deficiency, post septic necrosis and other congenital conditions leading to growth disturbance. All patients had issues with loss of motion at some point during the lengthening process. The knee and foot/ankle were equally affected. Numerous risk factors were identified across the cohort. Treatment provided included splinting, serial casting, bolt on shoes, exercise therapy, electrical muscle stimulation and passive stretching. Conclusions. Loss of motion in lower limb joints was common. Patients at higher risk were those with abnormal anatomy, larger target lengthening's, poor compliance or lack of access to local services. Therapy played a significant role in managing joint motion during treatment. However, limitations were noted. No one treatment option gave preferential outcomes, selection of treatment needed to be patient specific. Future research should look at guidelines to aid timely input and avoid secondary complications

Introduction. Selection of an optimum thickness of polyethylene insert in total knee arthroplasty (TKA) is important for the good stability and range of motion (ROM). The purpose of this study is to investigate the amount of change of ROM as the thickness of trial insert increase. Material and Method. The study included 86 patients with 115 knees undergoing TKA from October 2012 to February 2014. There were 17 men and 69 women with an average age of 75±8 (58–92) years. The implants posterior stabilized knee (Scorpio NRG, Stryker) was used and all prostheses were fixed with cement. The ROM was measured by the goniometer under the general anesthesia at the time of operation in increments of 1°. Preoperative flexion angle was measured by passively flexing the patient's hip 90 degrees and allowing the weight of the leg to flex the knee joint (Lee et al 1998). Extension angle was measured by holding the heel and raising the leg by another examiner. During TKA, flexion and extension angle was measured in a similar manner when each insert trial (8, 10, 12, and 15mm) was inserted. After the wound closure and removing the draping, ROM was measured again. Statistical analysis of range of motion was performed using a paired t-test to determine significance. Results. Preoperative extension angle was-11.8±7.5°and flexion angle was 125.4±14.9 °. postoperative extension angle after removing drapes was −5.0±3.4°and flexion angle was126.4±8.8°. Although extension angle was improved statistically (p<0.001), flexion angle was not improved. Intraoperative extension and flexion angle that were measured with the same thick insert trial as the polyethylene insert finally selected was −3.7±3.0°and 120.8±9.8°respectively. The thickness of polyethylene insert finally set was 8mm (28knees), 10mm (58knee), 12mm (24 knee), and 15mm (5knee). The amount of deficit in extension ROM by changing the trial inserts those were measured intraoperatively were 2.5±2.2° (n=112, 8 to 10mm, p<0.01), 3.2±2.8° (n=80, 10 to 12mm, p< 0.01), and 4.7±2.5° (n=15, 12 to 15mm, p<0.01). Flexion angle was 0.6±4.3° (8 to 10mm, n.s), 1.5±4.0° (10 to 12mm, p=0.002), 2.6±4.0° (12 to 15mm, p=0.025). Discussion. Although it is important to select a sufficient thick polyethylene insert to prevent postoperative instability, excessive thick polyethylene can decrease ROM especially extension. In many type of prosthesis, thickness of polyethylene insert differs every 2 mm is prepared. In the current study, if the thickness of polyethylene is increased 2mm (8 to10mm and 10 to 12mm) or 3mm (12 to15mm), extension and flexion angle was decreased 2.5–4.7°and 0.6–2.6°respectively

Aims. Pelvic tilt (PT) can significantly change the functional orientation of the acetabular component and may differ markedly between patients undergoing total hip arthroplasty (THA). Patients with stiff spines who have little change in PT are considered at high risk for instability following THA. Femoral component position also contributes to the limits of impingement-free range of motion (ROM), but has been less studied. Little is known about the impact of combined anteversion on risk of impingement with changing pelvic position. Methods. We used a virtual hip ROM (vROM) tool to investigate whether there is an ideal functional combined anteversion for reduced risk of hip impingement. We collected PT information from functional lateral radiographs (standing and sitting) and a supine CT scan, which was then input into the vROM tool. We developed a novel vROM scoring system, considering both seated flexion and standing extension manoeuvres, to quantify whether hips had limited ROM and then correlated the vROM score to component position. Results. The vast majority of THA planned with standing combined anteversion between 30° to 50° and sitting combined anteversion between 45° to 65° had a vROM score > 99%, while the majority of vROM scores less than 99% were outside of this zone. The range of PT in supine, standing, and sitting positions varied widely between patients. Patients who had little change in PT from standing to sitting positions had decreased hip vROM. Conclusion. It has been shown previously that an individual’s unique spinopelvic alignment influences functional cup anteversion. But functional combined anteversion, which also considers stem position, should be used to identify an ideal THA position for impingement-free ROM. We found a functional combined anteversion zone for THA that may be used moving forward to place total hip components. Cite this article: Bone Jt Open 2021;2(10):834–841

Purpose. This study was to investigate the effect of posterior tibial slope (PTS) on the kinematics in the cruciate-retaining total knee arthroplasty (CR-TKA) using 2- to 3- dimensional registration technique. Material & Methods. A total of 75 knees in 58 patients were recruited and categorized into the following two groups according to PTS. Group A was categorized PTS under 7degrees (n = 33) and group B was categorized PTS over 7 degrees (n = 42). The average age of group A and group B at the time of fluoroscopic surveillance date was 73.5 ± 7.4 years and 74.3 ± 4.5 years, respectively and the average follow-up period from operation date to fluoroscopic surveillance date was 13.8 ± 9.3 months and 16.7 ± 8.6 months, respectively. In vivo kinematics during sequential deep knee bending under weight-bearing condition were evaluated using fluoroscopic image analysis and 2- to 3- dimensional registration technique. Range of motion (ROM), axial rotation, anteroposterior (AP) translations of medial and lateral nearest points of the femoral component relative to the tibial component were measured and compared between the two groups. The nearest points were determined by calculating the closest distance between the surfaces of femoral component model and the axial plane of coordinate system of the tibial component. We defined external rotation and anterior translation as positive. P values under 0.05 was defined as statistically significant. Results. The mean PTS in group A and B were 5.5 ± 1.4°and 9.9 ± 1.9°, respectively. There was no statistically significant difference in the degrees of axial rotation from 0° to 110° of flexion between the two groups (4.9 ± 4.2° vs 5.2 ± 4.2°, p > 0.05), respectively. The hyperextension of group B were significantly larger than group A (−2.3 ± 6.6°vs −9.8 ± 8.7°, p <0.05). The ROM of group B were significantly larger than group A (118.7 ± 10.8°vs 128.7 ± 17.7°, p <0.05). However, there was no significant difference in the maximum flexion between the two groups (116.4 ±10.8°vs 118.9±14.5°, p >0.05), respectively. In terms of AP translation, medial nearest points were located significantly more posterior at 0°, 10°, 30°, 40° of flexion in group B compared to group A. There was no significant difference in the location of lateral nearest points between the two groups during all knee range of motion. Discussion/Conclusion. The results shown in this study demonstrated that the PTS influenced the kinematics and ROM under weight-bearing condition in CR-TKA. The large PTS induced great posterior displacement of medial nearest points during early flexion phase and increased hyperextension between the femoral and tibial components

The incidence of first metatarsophalangeal joint (MTPJ) stiffness following bunion surgery varies in the literature from 2% to 60%. The causes include pre-existing degenerative joint disease, infection, chronic regional pain syndrome (Type 1), joint incongruence and avascular necrosis. The aim of this study was to establish whether closure of the capsule influences the range of motion in the first MTPJ. We performed a cadaveric study using a ‘Y’ shaped medial capsulotomy as our model. A mid-medial approach was performed on ten cadaveric feet, exposing the medial capsule of the 1st MTPJ. The range of motion of the 1st MTPJ was recorded, and a ‘Y’ shaped capsulotomy performed. The capsule was then closed in neutral, full plantar flexion, and full dorsi flexion and the range of motion recorded. When the capsule was closed with the first MTPJ at the limit of plantar flexion there was a mean loss of 13.7° of dorsi-flexion (range 12°–15°, p< 0.01) compared with the pre-capsulotomy range of motion. When the capsule was closed in dorsi-flexion there was a mean loss of 9.3° of plantar flexion (range 0°–20°, p< 0.05). There was no change in range of motion when the capsule was closed in neutral. Capsular closure can influence first MPTJ motion. Care should therefore be taken during capsular repair. Closure in extremes of extension or flexion, as advocated in some techniques such as the Mitchell osteotomy, should be avoided

Purpose: The purpose of this historical prospective study was to compare the pre and post-operative range of motion (ROM) and quality of life outcomes 6 months post-operatively in patients with partial and full-thickness tears of the rotator cuff. Methods: Data of 90 consecutive patients diagnosed with partial thickness tear (PTT) who had undergone decompression and or acromiploasty were compared with 90 patients (age and gender-matched) who had undergone repair of a full-thickness tear (FTT). The outcomes were objective pre and post-operative range of motion (ROM) in 5 directions and three patient-derived outcome measures; one disease-specific, the Western Ontario Rotator Cuff Index, and two shoulder specific measures: the American Shoulder & Elbow Surgeons standardized shoulder assessment form and, the Constant-Murley. A statistical paired t-test analysis was conducted between change (pre vs. 6 months) in ROM and QOL scores to examine the impact of severity on improvement between the 2 groups. Results: Forty-three females and 47 males in each group (180 subjects in total) were included in the analysis. The mean age was 54.8 and 54.9 for the PTT and FTT groups respectively. The PTT group was significantly stiffer in pre-operative passive flexion (p=0.010), abduction (p=0.022) and active external rotation at 0 degree of abduction (p=0.040). The 6-month WORC, ASES, and relative Constant all showed significant improvement in quality of life in both groups (p< 0.0001). There was a statistically significant difference in passive external rotation at 0 degrees of abduction between groups with FTT group being stiffer than the PTT group (p=0.019) post-operatively. Change in ROM was not significantly different in all other directions. Conclusions: The intent of this study was to compare the pre-operative and rate of improvement in two groups of patients suffering from different severity of pathology. The results indicate that quality of life improves significantly regardless of the extent of tear (partial thickness vs. full thickness). Patients with FTT may require a longer time to improve their range of motion in external rotation

Purpose. The remplissage procedure may be performed as an adjunct to Bankart repair to address an engaging Hill-Sachs defect. Clinically, it has been reported that the remplissage procedure improves joint stability but that it may also restrict shoulder range of motion. The purpose of this biomechanical study was to examine the effects of the remplissage procedure on shoulder motion and stability. We hypothesized that the remplissage procedure would improve stability and prevent engagement but may have a deleterious effect on motion. Method. Eight cadaveric forequarters were mounted on a custom biomechanical testing apparatus which applied simulated loads independently to the rotator cuff muscles and to the anterior, middle and posterior deltoid. The testing conditions included: intact shoulder, Bankart defect, Bankart repair, 2 Hill-Sachs defects (15%, 30%) with and without remplissage. Joint range of motion and translation were recorded with an optical tracking system. Outcomes measured were internal-external rotation range of motion in adduction and 90 combined abduction, extension range of motion and stability, quantified in terms of joint stiffness and engagement, in abduction. Results. With a 15% Hill-Sachs defect, the remplissage significantly reduced internal-external rotation in adduction (15.111.1, p=0.039), but not in abduction (7.79.0, p=0.380). In a 30% Hill-Sachs defect, the remplissage procedure significantly reduced internal-external rotation in adduction (19.57.8, p=0.001), and in abduction (12.28.6, p=0.03). The remplissage procedure significantly enhanced stability in the 15% Hill-Sachs defect (4.74.0 N/mm, p=0.038), and in the 30% defect (3.93.2 N/mm, P=0.030) compared to the unrepaired defect. All of the unrepaired 30% defects engaged and the remplissage procedure successfully eliminated engagement in each case. However, impingement of the repair on the posterior glenoid with paradoxical posterior pivoting of the humeral head was observed in 50% of the specimens. Conclusion. The remplissage procedure significantly augmented a Bankart repair in 15% and 30% Hill-Sachs defects and, in 30% Hill-Sachs defects, the remplissage successfully prevented engagement of the defect. The remplissage procedure, however, did significantly reduced shoulder internal-external rotation range of motion as reported clinically, and was also found to reduce extension in the two defect groups. During extension the intra-articular soft tissue bumper created by the remplissage procedure was found to impinge on the posterior glenoid rim and cause pivoting, which produced non-physiologic glenohumeral joint distraction. Therefore, the remplissage procedure stabilized the joint to a significantly greater degree than did a Bankart repair alone; however, it also significantly reduced shoulder range of motion

Introduction: Range of motion (ROM) is an important measure of the success of knee Arthroplasty. The extent to which pain relief contributes to improvements in knee ROM in total knee Arthroplasty (TKA) patients is unknown. This prospective study assessed the separate effects of pain abolition and surgery on ROM in a group of 141-osteoathritic patient’s undergoing TKA. Pain had a significant inhibitory effect on knee ROM. Improvements in ROM following TKA may be primarily due to pain relief. Methods: 141 randomly selected patients underwent LCS total knee arthroplasty (De Puy). A single surgeon performed all operations, using an identical surgical technique. Passive flexion and extension were measured when awake, under anaesthesia, and post-operatively under anaesthesia. Paired t-tests were used to test for significant differences between the measurements. Independent samples t-tests were used to test for significant differences between the changes in flexion, extension and ROM between the time points tested. Results:. When awake the mean flexion was 116.8°, extension 3.8°, and ROM 113.0°. When anaesthetised pre-op, the flexion was 130.2°, extension 0.8°, and ROM 129.4°. When anaesthetised post-op the flexion was 133.8°, extension 0.2°, and the ROM 133.5°. Knee flexion (p < 0.0001) and range of motion (p < 0.0001) were significantly greater and knee extension (p < 0.0001) was significantly reduced following anaesthesia only. A further significant increase in knee flexion (p < 0.0001) and range of motion (p = 0.00014) was observed post –operatively under anaesthetic. However knee extension did not significantly increase further (p = 0.29). The average improvement in range of motion once anaesthetised was 16.4° (SD = 13.1°) with the majority of this improvement due to an increase of flexion (average increase of 13.4° (SD = 11.9°) rather than an increase in extension (average increase of 3.0° (SD = 4.2°). The combined effect of surgery and anaesthetic was 20.5° (SD = 12.3°), with the majority of this improvement due to an increase of flexion (average increase of 17° (SD = 8.5°) rather than an increase in extension (average increase of 3.6° (SD = 6.0°). Discussion: Pain abolition resulted in a mean increase of 16.4° in the range of motion, and both TKA combined with pain abolition further increased significantly the range of motion to a mean of 20.5°. This study suggests that improvements in ROM following total knee arthroplasty are primarily due to reduction in the symptoms of pain and that other factors such as surgical technique and prosthesis design can further increase ROM. Future studies should record the measurements of passive flexion, extension and range of motion in the anaesthetised patient, as this will allow objective assessment of changes in range of movement