Introduction Mobile-bearing total ankle arthroplasty has gained more interest in recent years. Clinical results show favourable but varying results, with survival rates between 70% and 90% at 10-year follow-up. Design-specific differences in early migration patterns might explain differences in result and possible modes of failure. Methods Prospective study of a cementless mobile-bearing total ankle arthroplasty by radiostereometric analysis (RSA). Fifteen total ankle arthroplasties were performed in patients with rheumatoid arthritis. The American Orthopaedic Foot and Ankle Society ankle score and radiostereometric radiographs were evaluated at regular intervals throughout the follow-up period: immediately postoperatively, 6 weeks postoperatively, 3 months, 6 months, and 12 months postoperatively and yearly thereafter. Results The postoperative clinical results improved. We observed increased migration of the tibial component during the first 3 months, but this stabilized by the 6-months followup. The mean lateral-medial migration was 0.8 mm, distal-proximal migration was 0.9 mm, and posteroanterior migration was −0.5 mm. The latter implicated that the total resultant migration was in anterior and valgus tilting of this tibial component. This resulted in a main mode of migration proximal, anterior and valgus tilting of the tibial component. Discussion This pilot study showed initial migration of this mobile-bearing ankle prosthesis into upward anterior and valgus tilting. However, migration stabilized at 6 months postoperatively. We think the surgical technique (anterior cortical window for placement) and the method of tibial fixation likely explain this migration

Introduction and Aims: Recently, concerns have emerged regarding the high stiffness of acetabular components inserted with alumina ceramic liners, which might potentially cause early migration and loosening. This study was designed to investigate in-vivo the migration pattern of these constructs. Method: Fifty patients (50 hips) operated on using the same surgical technique and the same prosthesis were randomised in two groups. The study group of hips was treated with an alumina ceramic liner, the control group of hips received a polyethylene liner. An alumina femoral head with a diameter of 28mm was used in all hips. Radiostereometric analysis (RSA) was performed to assess migration using serial follow-up radiographs. Results: The median pre-operative Harris hip score (HHS) was rated 48.9 points in the alumina group, and 47.7 points in the polyethylene group. At the two-year follow-up, the median HHS of the alumina group was rated 94.1 points, and was rated 93.7 points in the polyethylene group. There were no clinical or radiological signs of aseptic loosening. RSA of the alumina group of cups showed a median axial displacement of 0.026 mm (SD 0.35mm). The median axial displacement of the polyethylene group was 0.047 mm (SD 0.26 mm) (p=0.9). The median tilting of the cup was 0.21 degrees (SD 0.54 degrees) in the alumina group, and 0.35 degrees (SD 0.71 degrees) in the polyethylene group (p=0.12). Conclusion: At an average of two years post-operatively, the cups inserted with an alumina ceramic liner appeared stable, RSA showed low rates of non-progressive migration. Results did not differ from those observed using the same cup inserted with a polyethylene liner

Introduction. Modern cementless press fit stems rely on early fixation and stability for osteointegration and longterm success with early migration increasing the risk of failure. The Ein Bild Roentegen Analyse Femoral Component Analysis (EBRA-FCA) methods allow accurate measurement of femoral stem subsidence without the need for Tantalum markers. The degree of subsidence of femoral stems in the first two years has been shown to be highly predictive of failure when using the cut off value of 1.5 mm. We aimed to measure the early migration pattern of a titanium alloy, tapered, plasma and hydroxyapatite coated femoral stem and any factors associated with subsidence. Methods. Between January 2005-June 2007, 387 Accolade cementless femoral stems (Stryker, Allendale NJ) were implanted at our institution. Seventy-seven had a minimum of two years post operative follow up and a complete set of pre and postoperative radiographs for analysis. Our group inlcuded 45 females with a mean age of 71.4 years, and 32 males with a mean age of 68.5 years. The primary diagnosis was degenerative osteoarthritis in 71 patients, avascular necrosis in two, and post fracture in four patients. The average BMI was 27.1. We measured the canal index to assess bone quality and the canal calcar index to assess the proximal femoral morphology. Immediate postoperative radiographs were assessed for canal fill of the prosthesis and implantation varus/valgus angles. The EBRA-FCA software was used to obtain migration curves for each stem. Results. The mean follow up was 29.3months (24–48). The mean canal index was 0.55 (0.36–0.68) with a mean canal calcar index of 0.54 (0.39–0.79). The average canal fill index at the midpoint of the stem was <0.8 in 37 stems and >80 in 40 stems. The average subsidence at 24 months was 2 mm and this had risen to 2.4 mm by 36 months postoperatively. When analysed using a Kaplan Meier curve using 1.5 mm as an end point we found a survivorship of 63.4% (52.3–74.5) at 24 months and this had worsened to 41.6% (26.6–56.5) by 36 months. Multivariate and univariate regression analysis of measured variables did not reveal any significant hazard for any factor other than the larger stem sizes doing worse. Discussion. Although several cementless tapered stem designs have had an excellent track record, our migration analysis of the Accolade stem is somewhat concerning. Thirty three percent of stems had reached the 1.5 mm subsidence point by two years. This is of concern as work has previously shown this to predict failure of stems with aseptic loosening at ten years with an accuracy of 79%. If these stems go on to fail at the predicted rate this would represent an unacceptably high level of failure. Our data raises serious concerns about the overall clinical performance of this stem design due to poor initial stability and integration

Aseptic loosening is the most frequent cause of implant failure in total hip arthroplasty (THA). Additionally, failure rate was still found by some authors to be increased in patients with osteonecrosis of the femoral head (ON-FH). It is well evidenced that low initial fixation and early migration precedes and predicts long-term failure rate of both, the acetabular and femoral component in THA. This independent, double-blind, randomized, controlled study was primarily designed to evaluate whether a single infusion of 4 mg of zoledronic acid is sufficient to prevent implant migration determined by the EBRA-digital method. Fifty patients were consecutively enrolled between July 2002 and March 2005 to receive either 4 mg zoledronic acid (ZOL) or saline solution (CTR) one day after THA (Zweymüller system, cementless). Plain radiographs were performed postoperatively and all parameters were evaluated at each follow-up meeting interval at 7 weeks, 6 months, 1 year, and yearly thereafter during a median follow-up period of 2.8 years (2 years minimum). In CTR, subsidence increased up to −1.2 mm ± 0.6 SD at 2 years in CTR (P< 0.001). Less, but a near curve-linear shaped migration pattern was found for the ace-tabular component, with an averaged medialization of 0.6 mm ± 1.0 SD and a cranialization of 0.6 mm ± 0.8 SD at 2 years (P< 0.05, Friedman ANOVA) at 2 years. In ZOL, a significant reduction in bone turnover markers was accompanied by a complete prevention of cup migration in both, the transverse and vertical direction (P< 0.05, ANOVA), while there was only a trend to a decreased subsidence in stems. The study provides useful data which are promising and support the suggestions that bisphosphonates may offer significant opportunities to reduce and prevent implant migration of THA, thus increasing long-term durability of THA especially in selected high-risk patients

Purpose: We aimed to measure the early migration pattern of a titanium alloy, tapered, plasma and hydroxyapatite coated femoral stem and any factors associated with subsidence. Method: Between January 2005–June 2007, 387 Accolade cementless femoral stems (Stryker, Allendale NJ) were implanted at our institution. Seventy-seven had a minimum of two years post operative follow up and a complete set of pre and postoperative radiographs for analysis. Our group inlcuded 45 females with a mean age of 71.4 years, and 32 males with a mean age of 68.5 years. The primary diagnosis was degenerative osteoarthritis in 71 patients, avascular necrosis in two, and post fracture in four patients. The average BMI was 27.1. We measured the canal index to assess bone quality and the canal calcar index to assess the proximal femoral morphology. Immediate postoperative radiographs were assessed for canal fill of the prosthesis and implantation varus/valgus angles. The EBRA-FCA software was used to obtain migration curves for each stem. Best fit curve of subsidence over time was calculated and the data was analysed using a Kaplan Meier survivorship with 1.5 mm of subsidence as an endpoint. We then performed a multivariate and univariate regression analysis for predictors of subsidence. Results: The mean follow up was 29.3months (24–48). The mean canal index was 0.55 (0.36–0.68) with a mean canal calcar index of 0.54 (0.39–0.79). The average canal fill index at the midpoint of the stem was 80 in 40 stems. A total of 414 radiographs were analysed for the EBRA measurements. Of these 21 (5%) were discarded by the software as they did not meet the criteria for comparability. This led to the exclusion of seven patients, leaving the final study group of 77. All remaining patients had a minimum of four radiographs with an average of 4.6 for analysis. The average subsidence at 24 months was 2 mm and this had risen to 2.4 mm by 36 months postoperatively. When analysed using a Kaplan Meier curve using 1.5 mm as an end point we found a survivorship of 63.4% (52.3–74.5) at 24 months and this had worsened to 41.6% (26.6–56.5) by 36 months. Multivariate and univariate regression analysis of measured variables did not reveal any significant hazard for any factor other than the larger stem sizes doing worse. Conclusion: Although several cementless tapered stem designs have had an excellent track record, our migration analysis of the Accolade stem is somewhat concerning. Thirty three percent of stems had reached the 1.5 mm subsidence point by two years. This is of concern as work has previously shown this to predict failure of stems with aseptic loosening at ten years with an accuracy of 79%. If these stems go on to fail at the predicted rate this would represent an unacceptably high level of failure. Our data raises serious concerns about the overall clinical performance of this stem design due to poor initial stability and integration

Introduction: The use of screw fixation for cementless porous-coated acetabular components for primary total hip arthroplasty (THA) remains controversial. Aim of this study was to evaluate initial acetabular implant stability and late acetabular implant migration with screw fixation of the acetabular component in order to answer the question whether screws are necessary for the fixation of the acetabular component in cementless primary THA.

Methods: In a prospective study, 102 patients (107 hips) were available for follow up after primary THA using a cementless, porous-coated acetabular component. Patients were followed up at 6 and 12 weeks, 6 and 12 months and annually thereafter to an average of 2.6 ± 1.7 years. A total of 428 standardized radiographs were analyzed by the Einzel-Bild-Röntgen-Analyse (EBRA)-digital method. Additionally, the Harris Hip Score (HHS, 0–100) was assessed at the latest follow-up.

Results: 101 (94.4 %) implants did not show significant migration of more than 1 mm of the acetabular component. Six (5.6%) implants showed a migration of more than 1 mm: in 3 cases (2.8%), migration was progressive during follow-up and led to a revision surgery due to aseptic loosening. In 3 cases, migration came to a halt and cups were claimed stable. Individuals without cup migration had an average HHS of 78.4 ± 22.9, whereas patients who showed a cup migration of > 1 mm had 53.3 ± 24.2. Statistical analysis did not reveal preoperative patterns that would identify future migration.

Discussion: and Conclusion: Our findings show that the use of screw fixation for cementless porous-coated acetabular components for primary THA does not prevent cup migration.

Aims. Highly polished stems with force-closed design have shown satisfactory clinical results despite being related to relatively high early migration. It has been suggested that the minimal thickness of cement mantles surrounding the femoral stem should be 2 mm to 4 mm to avoid aseptic loosening. The line-to-line cementing technique of the femoral stem, designed to achieve stem press-fit, challenges this opinion. We compared the migration of a highly polished stem with force-closed design by standard and line-to-line cementing to investigate whether differences in early migration of the stems occur in a clinical study. Methods. In this single-blind, randomized controlled, clinical radiostereometric analysis (RSA) study, the migration pattern of the cemented Corail hip stem was compared between line-to-line and standard cementing in 48 arthroplasties. The primary outcome measure was femoral stem migration in terms of rotation and translation around and along with the X-, Y-, and Z- axes measured using model-based RSA at three, 12, and 24 months. A linear mixed-effects model was used for statistical analysis. Results. Results from mixed model analyses revealed a lower mean retroversion for line-to-line (0.72° (95% confidence interval (CI) 0.38° to 1.07°; p < 0.001), but no significant differences in subsidence between the techniques (-0.15 mm (95% CI -0.53 to 0.227; p = 0.429) at 24 months. Radiolucent lines measuring < 2 mm wide were found in three and five arthroplasties cemented by the standard and line-to-line method, respectively. Conclusion. The cemented Corail stem with a force-closed design seems to settle earlier and better with the line-to-line cementing method, although for subsidence the difference was not significant. However, the lower rate of migration into retroversion may reduce the wear and cement deformation, contributing to good long-term fixation and implant survival. Cite this article: Bone Joint J 2022;104-B(1):19–26

Aims. The Exeter short stem was designed for patients with Dorr type A femora and short-term results are promising. The aim of this study was to evaluate the minimum five-year stem migration pattern of Exeter short stems in comparison with Exeter standard stems. Methods. In this case-control study, 25 patients (22 female) at mean age of 78 years (70 to 89) received cemented Exeter short stem (case group). Cases were selected based on Dorr type A femora and matched first by Dorr type A and then age to a control cohort of 21 patients (11 female) at mean age of 74 years (70 to 89) who received with cemented Exeter standard stems (control group). Preoperatively, all patients had primary hip osteoarthritis and no osteoporosis as confirmed by dual X-ray absorptiometry scanning. Patients were followed with radiostereometry for evaluation of stem migration (primary endpoint), evaluation of cement quality, and Oxford Hip Score. Measurements were taken preoperatively, and at three, 12, and 24 months and a minimum five-year follow-up. Results. At three months, subsidence of the short stem -0.87 mm (95% confidence interval (CI) -1.07 to -0.67) was lower compared to the standard stem -1.59 mm (95% CI -1.82 to -1.36; p < 0.001). Both stems continued a similar pattern of subsidence until five-year follow-up. At five-year follow-up, the short stem had subsided mean -1.67 mm (95% CI -1.98 to -1.36) compared to mean -2.67 mm (95% CI -3.03 to -2.32) for the standard stem (p < 0.001). Subsidence was not influenced by preoperative bone quality (osteopenia vs normal) or cement mantle thickness. Conclusion. The standard Exeter stem had more early subsidence compared with the short Exeter stem in patients with Dorr type A femora, but thereafter a similar migration pattern of subsidence until minimum five years follow-up. Both the standard and the short Exeter stems subside. The standard stem subsides more compared to the short stem in Dorr type A femurs. Subsidence of the Exeter stems was not affected by cement mantle thickness. Cite this article: Bone Jt Open 2023;4(7):507–515

Aims. Femoral bone preparation using compaction technique has been shown to preserve bone and improve implant fixation in animal models. No long-term clinical outcomes are available. There are no significant long-term differences between compaction and broaching techniques for primary total hip arthroplasty (THA) in terms of migration, clinical, and radiological outcomes. Methods. A total of 28 patients received one-stage bilateral primary THA with cementless femoral stems (56 hips). They were randomized to compaction on one femur and broaching on the contralateral femur. Overall, 13 patients were lost to the ten-year follow-up leaving 30 hips to be evaluated in terms of stem migration (using radiostereometry), radiological changes, Harris Hip Score, Oxford Hip Score, and complications. Results. Over a mean follow-up period of 10.6 years, the mean stem subsidence was similar between groups, with a mean of -1.20 mm (95% confidence interval (CI) -2.28 to -0.12) in the broaching group and a mean of -0.73 mm (95% CI -1.65 to 0.20) in the compaction group (p = 0.07). The long-term migration patterns of all stems were similar. The clinical and radiological outcomes were similar between groups. There were two intraoperative fractures in the compaction group that were fixed with cable wire and healed without complications. No stems were revised. Conclusion. Similar stem subsidence and radiological and clinical outcomes were identified after the use of compaction and broaching techniques of the femur at long-term follow-up. Only the compaction group had intraoperative periprosthetic femur fractures, but there were no long-term consequences of these. Cite this article: Bone Jt Open 2021;2(12):1035–1042

Aims. Medial pivot (MP) total knee arthroplasties (TKAs) were designed to mimic native knee kinematics with their deep medial congruent fitting of the tibia to the femur almost like a ball-on-socket, and a flat lateral part. GMK Sphere is a novel MP implant. Our primary aim was to study the migration pattern of the tibial tray of this TKA. Methods. A total of 31 patients were recruited to this single-group radiostereometric analysis (RSA) study and received a medial pivot GMK Sphere TKA. The distributions of male patients versus female patients and right versus left knees were 21:10 and 17:14, respectively. Mean BMI was 29 kg/m. 2. (95% confidence interval (CI) 27 to 30) and mean age at surgery was 63 years (95% CI 61 to 66). Maximum total point motions (MTPMs), medial, proximal, and anterior translations and transversal, internal, and varus rotations were calculated at three, 12, and 24 months. Patient-reported outcome measure data were also retrieved. Results. MTPMs at three, 12, and 24 months were 1.0 mm (95% CI 0.8 to 1.2), 1.3 mm (95% CI 0.9 to 1.7), and 1.4 mm (0.8 to 2.0), respectively. The Forgotten Joint Score was 79 (95% CI 39 to 95) and Knee Injury and Osteoarthritis Outcome Score obtained at two years was 94 (95% CI 81 to 100), 86 (95% CI 75 to 93), 94 (95% CI 88 to 100), 69 (95% CI 48 to 88), and 81 (95% CI59 to 100) for Pain, Symptoms, Activities of Daily Living, Sport & Recreation, and Quality of Life, respectively. Conclusion. In conclusion, we found that the mean increase in MTPM was lower than 0.2 mm between 12 and 24 months and thus apparently stable. Yet the GMK Sphere had higher migration at one and two years than anticipated. Based on current RSA data, we therefore cannot conclude on the long-term performance of the implant, pending further assessment. Cite this article: Bone Jt Open 2021;2(9):737–744

Cementless stem designs in total hip arthroplasty differ in relation to geometry and area of fixation. We utilised radiostereometric analysis (RSA) to evaluate the 2-year migration of a novel, short, proximally coated femoral stem. 30 participants undergoing primary total hip replacement for any cause (rheumatoid or inflammatory arthritis, osteoarthritis) were prospectively recruited in this study. Osteoporotic patients and cases of suspected infection were excluded. All patients received a short blade stem, proximally coated with a reduced lateral shoulder and narrow triple taper geometry to minimise bone removal. RSA radiographs were performed post-operatively and at 6 weeks, 6 months, 1- and 2 years. The Harris Hip Score (HHS), Oxford Hip Score (OHS) and EQ-5D were collected at baseline and at 2 years post-operatively. The stability of implants and complications were captured during each follow-up visit. A total of 14 female and 16 male patients were recruited with a mean age of 64.8 (range 47 to 75). At two years the mean subsidence of the stem was 0.34 mm (SD 0.62) and the total migration 0.74 mm (SD 0.60). The mean medial translation at two years was 0.059 (0.24) and the mean anterior translation 0.12 (0.59) respectively. Baseline PROM scores improved significantly at 2-years from pre-operatively (median and interquartile range): HHS from 33 (18.25) to 92 (19), EQ5D from 0.5 (0.35) to 0.94 (0.17), OHS from 21 (18.25) to 42 (4.25). P-value for all comparisons was <0.001. 2-year follow up data revealed no complications. There were no stem revisions in study participants and no heterotopic ossifications were identified on radiographs. 2-year migration results of a cementless, short blade, proximally coated tapered femoral stem using RSA, showed the stem exhibits a predictable migration pattern and achieves initial stability. This is highly likely to translate to mid and long-term stability, which needs to be corroborated by long-term outcome studies. Furthermore, participants demonstrated excellent clinical, patient reported and radiological outcomes after 2 years of follow up to support expansion in the use of this prosthesis

Purpose: The purpose of this prospective blinded randomized control trial was to compare the stem migration of two cemented stem designs using radiostereometric analysis (RSA). This was essentially a safety study in which our hypothesis was that the newer design (CPCS, Smith and Nephew Inc) would demonstrate similar micro-motion to the well-established Exeter (Stryker) design. Method: Thirty patients were consented and enrolled into a blinded RCT in which 15 patients received a dedicated RSA CPCS stem and 15 patients received a RSA Exeter stem. Both stems are collarless tapered polished cemented stems, the only difference being a slight lateral to medial taper with the CPCS design. Outcome measures were compared (Hip Society Score, WOMAC, SF-12). RSA analysis was conducted immediately postoperatively, at 6 weeks, 3 months, 6 months, 1 year and 2 years. Results: No difference was found in any of the outcome measures pre-operatively or postoperatively. At 2 years, stem subsidence for the CPCS stem was approximately half that seen for the Exeter stem (0.565±0.189mm and 0.981±0.209mm respectively, p< 0.0001). In contrast, posterior (internal) rotation of the CPCS was approximately twice that of the Exeter stem (1.496±1.215° and 0.716±0.818° respectively, p=0.221). Other migration patterns were no different between stems. Conclusion: As expected with this stem design, both stems showed some axial and rotational migration within the cement mantle. The subtle differences in design may explain the differences in migration patterns. Our data suggests that the newer CPCS design should perform well over the long-term

Purpose: Porous metal technology may have significant impacts on implant fixation and long-term survival due to their high co-efficient of friction and similarity to trabecular bone in morphology and mechanical behaviour. While promising, the in vivo mechanical behaviour and micromotion at the interface has not previously been reported on. We report on the 2-year results of an RCT using radiosterometric analysis (RSA) to asses a porous metal (PM) monoblock tibial component. Method: Patients undergoing TKA were randomized to receive a either the PM (n=34) or the cemented tibial component (n=33). A standardized protocol was used for intra and post-operative factors. RSA exams were obtained postoperatively within 4 days of surgery and at 6, 12 and 24 months. One patient was excluded due to an intraoperative complication, and four others were lost to follow-up due to poor bead visibility or morbidity. Standard subjective outcome measures were applied. Results: There were no revisions in either group. The PM group exhibited two distinct migration patterns. One group stabilized immediately with similar migration to the cemented cases (0.38 vs. 0.46 p=0.4). A subset of 6 PM cases demonstrated significantly higher initial migration (mean=2.01mm, p< 0.01) but appeared stable at 2 years. In addition, 3 of the 6 high migration cases manifested independent bead subsidence. This was determined to be due to PM plate deformation. Two cemented cases were considered at risk for early failure due to aseptic loosening because of RSA migration pattern. There were no differences between groups in the subjective health outcome measures. Conclusion: A subset of PM components demonstrated high early migration followed by stabilization. It appears that some of these PM components deformed under load, most often in the posteromedial corner, perhaps as a result of malalignment or ligament imbalance. The implications of this finding are yet to be determined

Aim: To find out when, at which interface, and to what extent migration of the Exeter stem after revision with morselized allograft bone and cement takes place and to evaluate if restricted weight bearing had any influence on the migration pattern. Methods: 40 stem revisions were followed by radiostereometry (RSA). The surgical procedure described by the Exeter group in England (Gie et al 1993) was used. Results: Most migration occurs within the first weeks after surgery. The Exeter stem migrates “within” the cement mantle and the stem-cement beam also migrates relative to femur. All stems migrated distally and most of them also migrated medially or laterally and posteriorly. Migration was still observed in one third of stems between 1.5 and 2-year follow-ups. At 2 years stem subsidence averaged 2.5 mm, medial or lateral migration averaged 1.2 mm and posterior migration averaged 2.9 mm. No correlation to the preoperative bone stock deficiency was observed. Between 2 and 5 years only marginal migration occurred in 11 of the 15 stems followed for 5 years. No differences in the migration pattern were detected when free weight bearing was allowed immediately after revision in hips without intraoperative skeletal complications as compared to when restricted weight bearing was practiced. No rerevision was performed. Conclusions: Most migration occurs early. Subsidence occurs of the stem within the cement mantle and of the stem-cement beam. Many stems migrate marginally even after 2 years but this does not deteriorate the results during the first five years. Restricted weight bearing postoperatively in uncomplicated cases might not be needed

Purpose: To investigate the effect that gender may have on the RSA defined migration pattern of cemented and uncemented tibial components in total knee arthroplasty (TKA). Method: 70 patients with primary osteoarthritis of the knee were randomized to receive a Nexgen uncemented Trabecular Metal (TM) monoblock tibial component (n=37; 20 female; mean age=66 years; mean BMI=32) or cemented cobalt chrome modular tibial cmponent (n=33; 19 female; mean age=65 years; mean BMI=33). The same design of posterior stabilized tibial component was used in all cases. Four experienced knee surgeons followed a standardized surgical technique (PCL resection, patella resurfacing, RSA bead placement in poly-ethylene and tibia) and post-operative protocol (CPM as tolerated, no drains, WBAT). Within 4 days of surgery and at 6, 12 and 24 months post-operatively patients underwent bi-planar x-rays. RSA analysis was performed with MB-RSA (MEDIS, Leiden). Results were reported as maximum total point motion, and 6 degrees of freedom translations and rotations. A repeated measure ANOVA was used to test for differences and all statistical analysis was performed using Minitab V.14 (Minitab Inc, State College, PA, USA). Results: Highly significant differences were seen in the migration patterns in females between the TM and cemented tibial components. Females with the TM implant tended to rotate internally (0.29° vs. −0.16°, p< 0.0001), tilt posteriorly (−0.49° vs. 0.01°, p< 0.0001) and subside (−0.357mm vs. 0.00mm, p< 0.0001) compared with the female subjects with the cemented implant. In the male group, only subsidence was different between the TM and cemented groups (−0.344mm vs. −0.01mm, p< 0.0001). Conclusion: Uncemented TM implants in females tended to tilt posteriorly, rotate internally and subside. Uncemented implants in males tended only to subside. The increased tilting and rotation detected in females could be due to lower BMD or to mismatching between the shape of the female proximal tibial and the tibial component. These results may have implications for the current use of uncemented implants in females and for future design of uncemented implants for the female population

Introduction The aim of this study was to describe the migration pattern of the Exeter stem after revision with morsellised allograft bone and cement, to evaluate if restricted weight bearing had any influence on migration, and to measure, before and after revision, the quality of life comparing it to primary cemented hip arthroplasties. Methods Forty-one consecutive stem revisions were followed by radiostereometry (RSA, 1. Selvik 1989). The accuracy of the RSA set-up was between 0.3 mm and 0.7 mm. The surgical procedure described by the Exeter group (2. Gie 1993) was used. All were first time revisions for aseptic loosening and all patients had had their primary arthroplasty for osteoarthritis. Bone stock deficiency was classified according to Gustilo and Pasternak. Sixteen were type I, 20 type II, five type III but none was classified as type IV. The Nottingham Health Profile was used to measure quality of life before and after revision. Results All stems migrated distally and most of them also migrated medially or laterally and posteriorly. Migration was still observed in one third of stems between 1.5 and two year follow-ups. At two years stem subsidence averaged 2.5 mm, medial or lateral migration averaged 1.2 mm and posterior migration averaged 2.9 mm. No correlation to the pre-operative bone stock deficiency was observed. Between two and five years only marginal migration occurred in 12 of the 15 stems followed for five years. No differences in the migration pattern were detected when free weight bearing was allowed immediately after revision in hips without intra-operative skeletal complications compared to when restricted weight bearing was practiced. Most migration occurs within the first two weeks after surgery. NHP scales for pain, physical mobility, sleep and energy scales improved significantly. NHP scores were in all six scales comparable to those of primary arthroplasties. No rerevision was performed and no stem had radiographic sings of loosening. Conclusions Most migration occurred early after revision and decreased gradually. Marginal migration after two years does not deteriorate the results during the first five years after surgery. Quality of life (patient outcome) after revision with impacted morsellised allograft bone and cement was comparable to that of primary arthroplasties. In relation to the conduct of this study, one or more of the authors is in receipt of a research grant from a non-commercial source

Aims

Both the femoral and tibial component are usually cemented at revision total knee arthroplasty (rTKA), while stems can be added with either cemented or press-fit (hybrid) fixation. The aim of this study was to compare the long-term stability of rTKA with cemented and press-fitted stems, using radiostereometric analysis (RSA).

A large body of the orthopaedic literature clearly indicates that the cement mantle surrounding the femoral component of a cemented total hip arthroplasty should be at least 2 mm thick. In the early 1970s, another concept was introduced and is still in use in France consisting of implanting a canal filling femoral component line-to-line associated with a thin cement mantle. This principle has been named the “French paradox”. An explanation to this phenomenon has been provided by in-vitro studies demonstrating that a thin cement mantle in conjunction with a canal filling stem was supported mainly by cortical bone and was subjected to low stresses. We carried out a study to evaluate the in-vivo migration patterns of 164 primary consecutive Charnley-Kerboull total hip replacements. All prosthesis in the current series combined an all-polyethylene socket and a 22.2 mm stainless steel femoral head. The monobloc double tapered (5.9 degrees) femoral component was made of 316L stainless steel with a highly polished surface (Ra = 0.04 μm), a quadrangular section, and a neck-stem angle of 130 degrees. The stem was available in six sizes with a stem length (shoulder to tip) ranging from 110 mm to 160 mm, and a neck length ranging from 24 mm to 56 mm. For each size, the femoral component was available in two to four different diameters to adapt the implant to the medullary canal. Hence the whole range comprised a total of 18 standard femoral components. The femoral preparation included removal of diaphyseal cancellous bone to obtain primary rotational and varus/valgus stability of the stem prior to the line-to-line cementation. We used the Ein Bild Roentgen Analyse Femoral Component (EBRA-FCA) method to assess the subsidence of the femoral component. At the minimum 15-year follow-up, 73 patients were still alive and had not been revised at a mean of 17.3 years, 8 patients had been revised, 66 patients were deceased, and 8 patients were lost to follow-up. The mean subsidence of the entire series was 0.63 ± 0.49 mm (0 – 1.94 mm). When using a 1.5 mm threshold, only four stems were considered to have subsided. With revision of either component for any reason as the endpoint, the cumulative survival rate at 17 years was 90.5 ± 3.2% (95% CI, 84.2% to 96.8%). With radiological loosening of the femoral component as the endpoint, the cumulative survival rate at 17 years was 96.8 ± 3.1% (95% CI, 93.2% to 100%). This study demonstrated that, in most cases, a highly polished double tapered stem cemented line-to-line does not subside up to 18-year follow-up

Aims

Limited implant survival due to aseptic cup loosening is most commonly responsible for revision total hip arthroplasty (THA). Advances in implant designs and materials have been crucial in addressing those challenges. Vitamin E-infused highly cross-linked polyethylene (VEPE) promises strong wear resistance, high oxidative stability, and superior mechanical strength. Although VEPE monoblock cups have shown good mid-term performance and excellent wear patterns, long-term results remain unclear. This study evaluated migration and wear patterns and clinical and radiological outcomes at a minimum of ten years’ follow-up.

Aims

A novel enhanced cement fixation (EF) tibial implant with deeper cement pockets and a more roughened bonding surface was released to market for an existing total knee arthroplasty (TKA) system.This randomized controlled trial assessed fixation of the both the EF (ATTUNE S+) and standard (Std; ATTUNE S) using radiostereometric analysis.