Introduction. In Europe a femoral neck retaining stem (Metha, Aesculap Inc, Tuttlingen, Germany) has been reported with excellent midterm survivorship. We report on a US series and compare it to a review of reports in Europe over the past decade to determine if US experience matches that in Europe. Methods. A review of published studies was performed on PubMed with search terms: Hip, replacement, arthroplasty, and Metha. We found four publications that met the criteria of reporting survivorship and reasons for revision surgery. The results from these four articles combined had 4179 THA with the Metha stem. After IRB approval three orthopaedic groups in the US were used to combine their experience over the last 11 years. These US sources had 824 surgeries performed between 2008–2019. We then reported on all revisions for comparison of survivorship. Results. In the four publications [1–4] there was a reported 4.8% failure over 5–10 years for any reason. In the 824 US cases there were 3 periprosthetic infections, 4 periprosthetic fractures (all within 15 months) and 2 revisions for other reasons (thigh pain and leg length discrepancy). If stem revisions for any reason are taken into account the Kaplan-Meier Survivorship at 5 years is 94.0%, and if only aseptic loosening is considered then the survivorship is 99.1% at 5 years and 98.4% at 11 years. Conclusion. Bone sparing implants for primary total hip replacement have seen the popularization of mid stems in the USA but a FNR stem has not seen significant popularity. This report from a three surgeon experience has excellent survivorship with two aseptic loosening cases both determined at time of periprosthetic fracture. Survivorship for this series at 11 years of 98.4% for aseptic loosening matches many reports of mid length or standard length primary total hip stems in national registry databases

The histopathology of periprosthetic tissues has been important to understanding the relationship between wear debris and arthroplasty outcome. In a landmark 1977paper, Willert and Semlitsch (1) used a semiquantitative rating to show that tissue reactions largely reflected the extent of particulate debris. Notably, small amounts of debris, including metal, could be eliminated without “overstraining the tissues” but excess debris led to deleterious changes. Currently, a plethora of terms is used to describe tissues from metal-on-metal (M-M) hips and corroded modular connections. We reviewed the evaluation and reporting of local tissue reactions over time, and asked if a dose response has been found between metal and tissue features, and how the use of more standardized terms and quantitative methodologies could reduce the current confusion in terminology. Methods. The PubMed database was searchedbetween 2000 and 2015 for papers using “metal sensitivity /allergy /hypersensitivity, Adverse Local Tissue Reaction (ALTR): osteolysis, metallosis, lymphocytic infiltration, Aseptic Lymphocytic Vasculitis-Associated Lesions (ALVAL), Adverse Reaction to Metal Debris (ARMD) or pseudotumor/ pseudotumour” as well as metal-on-metal / metal-metal AND hip arthroplasty/replacement. Reports lacking soft tissue histological analysis were excluded. Results. 131 articles describing M-M tissue histology were found. In earlier studies, the terms metal sensitivity / hypersensitivity /allergy implied or stated the potential for a Type IV delayed type hypersensitivity response as a reason for revision. More recently those terms have largely been replaced by broader terms such as ALTR, ALVAL and ARMD. ALVAL and metal hypersensitivity were often used interchangeably, both as failure modes and histological findings. Several histology scoring systems have been published but were only used in a limited number of studies. Correlations of histological features with metal levels or component wear were inconclusive, typically because of a high degree of variability. Interestingly, there were very few descriptions that concluded that the observed reactions were benign / normal or anticipated i.e. regardless of the histological features, extent of debris or failure mode, the histology was interpreted as showing an adverse reaction. Discussion. There is now an expanded set of terms to describe tissues but they lack clear definitions and typically do not use quantitative histological data to describe a wide range of periprosthetic reactions to metal. Lower limits of inflammation, necrosis or re-organization that represent a “normal” reaction to surgery and/or small amounts of wear debris are not clearly defined and are rarely discussed. The widespread adoption of the term “adverse” in the present tissue lexicon implies a cause and effect relationship between metal wear and corrosion products and histological features even though this has yet to be determined. The use of quantitative histological scores rather than subjective histological descriptions is imperative to improve the understanding and reporting of the range of periprosthetic reactions. In particular, a new lexicon that allows for a level of tissue reaction that is not misinterpreted as adverse is required

Artificial joints have been increasingly used in the treatment of physically disabled people who suffer from joint diseases such as osteoarthritis and rheumatoid arthritis. Ultra high molecular weight polyethylene (UHMWPE) is commonly used in hard-on-polymer joints as an impact-absorbing material for artificial hip joints because of its very low friction coefficient, high wear resistance, impact strength, and biocompatibility. However, particles generated by excessive wear and fatigue can cause osteolysis, which may lead to loosening. This has led to recent interest in metal-on-metal joints, which can provide better wear properties than hard-on-polymer joints, leading to reduced osteolysis. However, during gait, metal-on-metal joints are exposed to greater impacts than hard-on-polymer joints. These impacts can cause severe pain in patients who have undergone hip replacement arthroplasty. In previous work, we proposed a double-shell metal-on-metal artificial hip joint in which a single garter spring was inserted between the inner and outer acetabular shell of an impact relief device[1]. A garter spring is usually used by loading a compression stress from the outside to the center axis. The acetabular shell is composed of two layers as shown in Fig.1. In the current work, the performance of single and dual garter springs was investigated using static compression and free-fall type impact tests. Static compression tests were conducted on a conventional vise to examine the deformation of various kinds of garter springs under uniaxial loading. Free-fall impact tests, on the other hand, were conducted on a free-fall type impact test machine as shown in Fig. 2. The impact relief ability of the garter springs under impact loading was examined, and the maximum impact load and maximum impact load arriving-time were estimated[2]. The relief ability was also investigated for smaller and larger diameter garter springs with a three-pitch angle, and the maximum applied load was determined by taking into account the applied load on actual hip joints. Static compression test results indicated that some kinds of garter spring could withstand vertical loads of over 6000N, which is estimated to be equal to maximum vertical load during jumping. The pitch angle increased with an increase in the compression load and the shape of the coil ring deformed from a circular to ellipsoidal shape as the compression load increased, which may lead to a reduction in impact load and an increase in impact relief time. The impact test results for a single spring indicated that the maximum impact load decreased in reverse proportion to the maximum impact load arriving-time. A smaller diameter garter spring provided less maximum impact load and longer arriving maximum load time. In the case of dual garter springs, which have smaller and larger diameter garter springs, the springs offered a lower maximum impact load and a longer impact load arriving-time than a single spring

Our center has performed hip replacement arthroplasties since 1997. The purpose of this study was to assess the long term clinicoradiological results of a total hip replacement using the double tapered Mallory-Head system. The results of a consecutive series of 81 total hip replacements in 75 patients were reviewed three to eleven years (average eight years) postoperatively. The diagnosis were avascular necrosis for 46 hips (57%), osteoarthritis for 12 hips (15%), RA for 9 hips (11%), and others. The clinical result was evaluated on the basis of the modified Harris hip score, modified Merle d’Aubigné-Postel score. A detailed radiographic analysis was also performed. The average modified Harris hip score improved from 56 points to 92 points. The average modified Merle d’Aubigné-Postel score was 15 points at the latest follow up, and 55 hips(68%) were classified as the clinical grades of excellent or good results. Two acetabular components were revised because of loosening, and one was revised because of recurrent dislocation. We concluded that the clinical and radiological evaluations of the total hip replacements, using the Mal-lory-Head system showed good results with mid-term follow-up

Introduction: Arthroplasty plays a growing role in our society today. Due to scientific and medical progress there are an increasing number of viable candidates and the improvement of quality of life thereafter speaks for itself. Even though the operations are largely successful, complications after joint replacement surgery occur frequently. Approximately 10% of lower limb arthroplasties need surgical revision, of which 70% are due to loosening. The purpose of this study was to assess the feasibility of 18-fluorodeoxyglucose positron emission tomography (18FFDG–PET) in detecting septic and aseptic endoprosthetic loosening of hip and knee endoprostheses. Materials and Methods: Thirty-three patients (age range: 45–90y) with lower limb arthroplasty complaints (74 prostheses) were studied preoperatively with 18F-FDG-PET. All patients underwent surgery at a later stage with microbiological culturing to differentiate aseptic and septic loosening and to confirm the final diagnosis. Prostheses were tested intraoperatively for stability and microbiology. Results: The sensitivity/specificity of 18F-FDG-PET towards implant loosening in the hip was 80%/87%, in the knee 56%/82%. The sensitivity/specificity for infectious loosening in hip replacement arthroplasties was 67%/83%, in the knee 14%/89%. Discussion: 18F-FDG-PET seems an excellent method for detecting hip endoprosthetic loosening and a moderate tool to diagnose hip implant infection. It should not be seen as the method of choice to diagnose knee endoprosthetic loosening and infection

Introduction: Arthroplasty plays a growing role in our society today. Due to scientific and medical progress there are an increasing number of viable candidates and the improvement of quality of life thereafter speaks for itself. Even though the operations are largely successful, complications after joint replacement surgery occur frequently. Approximately 10% of lower limb arthroplasties need surgical revision, of which 70% are due to loosening. The purpose of this study was to assess the feasibility of 18-fluorodeoxyglucose positron emission tomography (18F-FDG-PET) in detecting septic and aseptic endoprosthetic loosening of hip and knee endoprostheses. Materials and Methods: Thirty-three patients (age range: 45 – 90y) with lower limb arthroplasty complaints (74 prostheses) were studied preoperatively with 18F-FDG-PET. All patients underwent surgery at a later stage with microbiological culturing to differentiate aseptic and septic loosening and to confirm the final diagnosis. Prostheses were tested intraoperatively for stability and microbiology. Results: The sensitivity/specificity of 18F-FDG-PET towards implant loosening in the hip was 80%/87%, in the knee 56%/82%. The sensitivity/specificity for infectious loosening in hip replacement arthroplasties was 67%/83%, in the knee 14%/89%. Discussion: 18F-FDG-PET seems an excellent method for detecting hip endoprosthetic loosening and a moderate tool to diagnose hip implant infection. It should not be seen as the method of choice to diagnose knee endoprosthetic loosening and infection

Computer aided joint replacement surgery is being used increasingly. It is more commonly used at present in the knee replacement surgery as compared to hip replacement arthroplasty. It is still under developmental phase. The published literature shows there is increased accuracy of the component placement of acetabular cup and femoral stem. We describe the technique for the Stryker navigation system as used in total hip arthroplasty. The technique used by us presently is an active tracker system. This is a both way communication system of infrared waves between the trackers and the sensors. The trackers are fixed to the bones, then the registration of patient specific anatomy is done and hip arthroplasty is performed with aid of the computer navigation. The computer navigation gives the values of the component orientation in space. It gives the implant position in the pelvis and femur models generated by the computer but fed in and created by the surgeon. It is important that the data fed to the computer in making the model of pelvis and femur is accurate. It is surgeon dependent. At the end of surgery one can also evaluate impingement and range of motion. It also shows the change in offset of the centre of rotation of the hip as well as leg lengthening. While it can aid in the technical performance it is essential that the surgeon does not go blind to his operating environment as the computer navigation is to help the surgeon, not replace

Introduction: Osteonecrosis of the femoral head occurs in young patients. The preservation of the hip joint is vitally important because hip replacement arthroplasty is associated with high rates of failure in young and active patients. Curved intertrochanteric varus osteotomy is one of several joint preserving procedures used to treat these patients. Methods: Between June 2003 and June 2006, 46 patients (49 hips) who had osteonecrosis of the femoral head were treated with curved intertrochanteric varus osteotomy. There were 23 men and 23 women who had a mean age at the time of osteotomy was 33 years (range, 17 to 51 years). The osteotomy was fixed with a 120 degree compression hip screw in the first 34 hips and with a 95 degree dynamic condylar screw in the remaining 15 hips. Clinical evaluation was performed using the scoring system of Merle d’Aubigne et al. Radiological failure of the operation was defined as further collapse of the femoral head by more than 2 mm or progressive narrowing of the joint space compared with the immediate postoperative radiograph. Results: The mean duration of follow-up was 22 months (range, 12 to 48 months). One patient (one hip) required a total hip arthroplasty due to loss of fixation and penetration of the lag screw into the joint space. In two patients (two hips), the plate fractured at 3 and 4 months after the operation, which was changed to a new plate. Thus, 48 of the 49 hips survived at a mean follow-up 22 months. In these 48 hips, the mean Merle d’Aubigne hip score was 17.2 points at latest evaluation and there was no instance of radiologic failure. Discussion: Curved intertrochanteric varus osteotomy is a satisfactory joint preserving method to treat osteonecrosis of the femoral head

Metal-on-metal bearing surfaces have been reintroduced for use in total hip replacement, despite concerns regarding the potential risks posed by metallic by-products. We have compared periprosthetic tissues from metal-on-metal and metal-on-polyethylene hip replacements at revision surgery with control tissues at primary arthroplasty. Tissues were obtained from 9 control, 25 contemporary metal-on-metal, 9 CoCr-on-polyethylene and 10 titanium-on-polyethylene hip replacement arthroplasties. Each was processed for routine histology with Haematoxylin and Eosin. Quantitative stereological analysis was performed at the light microscopic level. Metal-on-metal sections showed more surface ulceration and this was correlated with the density of inflammation in the deeper tissues layers. Metal-on-metal tissues displayed a pattern of well-demarcated tissue layers, which were rarely seen in metal-on-polyethylene cases. In metal-on-polyethylene cases, the inflammation was predominantly histiocytic. Metal-on-metal cases by contrast showed a lymphocytic infiltrate with abundant plasma cells. Metal-on-metal tissues showed a striking pattern of peri-vascular inflammation with prominent lymphocytic cuffs especially deep to areas of surface ulceration. Levels of inflammation were higher in cases revised for failure than in those retrieved at autopsy or exploratory surgery. Total replacement and surface replacement designs of metal-on-metal arthroplasty showed similar histological changes. Plasma cells were not seen in any of the metal-on-polyethylene cases. The differences between the patterns of inflammation and cellular infiltration seen in metal-on-metal and metal-on-polyethylene tissues were highly statistically significant. The pattern and type of inflammation in periprosthetic tissues from metal-on-metal and metal-on-poly-ethylene arthroplasties is very different. Our findings support the conclusion that metal-on-metal articulations are capable of generating a form of immunological response to metallic wear debris that has not been described previously. The incidence and clinical implications of these immunological responses in failed metal-on-metal joints are unknown

Pain relief in hip arthroplasty plays an important role in the intra/post operative stages in order to achieve an almost pain free post operative recovery period to mobilise the patient as early and safely as possible and avoid undesirable post surgical complications. A consecutive series of 99 total hip arthroplasties in 93 patients performed by a single surgeon between December 1996 and January 2006 were assessed for signs of clinical or radiological loosening. Intra-operative local anaesthetic mixture (Ropivacaine-Ketorolac (30mg) -Adrenaline or RKA mixture) was infiltrated into the joint capsule and surrounding tissue around the acetabular component, and into the different muscle layers in the thigh around the femoral component. A total of 150–200 mls of this mixture was injected and a further 50 mls (with 30mg ketorolac) injected through a catheter left in-situ before discharge 12 to 24 hours later. Radiographic analysis was carried out using the Hodgkinson criteria to predict acetabular component loosening and the Gruen method to determine femoral component loosening. Of the 99 hybrid hips, 57 were right and 42 were left hip arthroplasties and 6 patients had bilateral consecutive hips done. 5 were performed for revision of fractured necks of femur in Birmingham hip resurfacings and one total hip arthroplasty revised to a hybrid and the remaining 92 were primary hybrid hip arthroplasties. The arthroplasties were performed for Osteoarthritis (89), Rheumatoid arthritis (4), and others (6). At mean follow up of 4.2 years, no aseptic loosening was noted radiologically or clinically, no components have been revised for failure or loosening and no components have dislocated. The use of high dose local infiltration NSAIDs in the intraoperative and early post operative phase does not seem to affect prosthetic fixation at-least during short to mid term follow up of total hip joint arthroplasties

Objectives

To investigate psychosocial and biomedical outcomes following total hip replacement (THR) and to identify predictors of recovery from THR.