Aims. Excessive chondrocyte hypertrophy is a common feature in cartilage degeneration which is susceptible to joint overloading, but the relationship between mechanical overloading and chondrocyte hypertrophy still remains elusive. The aim of our study was to explore the mechanism of mechanical compression-induced chondrocyte hypertrophy. Methods. In this study, the temporomandibular joint (TMJ) degeneration model was built through forced mandibular retrusion (FMR)-induced compression in TMJ. Chondrocytes were also mechanically compressed in vitro. The role of O-GlcNAcylation in mechanical compression-induced chondrocyte hypertrophy manifested through specific activator Thiamet G and inhibitor OSMI-1. Results. Both in vivo and in vitro data revealed that chondrocyte hypertrophic differentiation is promoted by compression. Immunofluorescent and immunoblotting results showed that protein pan-O-GlcNAcylation levels were elevated in these hypertrophic chondrocytes. Pharmacologically inhibiting protein pan-O-GlcNAcylation by OSMI-1 partially mitigated the compression-induced hypertrophic differentiation of chondrocytes. Specifically, runt-related transcription factor 2 (Runx2) and SRY-Box 9 transcription factor (Sox9) were subjected to modification of O-GlcNAcylation under mechanical compression, and pharmacological activation or inhibition of O-GlcNAcylation affected the transcriptional activity of Runx2 but not Sox9. Furthermore, compression-induced protein pan-O-GlcNAcylation in chondrocytes was induced by enhanced expression of glucose transporter 1 (GLUT1), and depletion of GLUT1 by WZB117 dampened the effect of compression on chondrocyte hypertrophy. Conclusion. Our study proposes a novel function of GLUT1-mediated protein O-GlcNAcylation in driving compression-induced hypertrophic differentiation of chondrocytes by O-GlcNAc modification of Runx2, which promoted its transcriptional activity and strengthened the expressions of downstream hypertrophic marker. Cite this article: Bone Joint Res 2025;14(3):209–222

Introduction: Compression staples are indicated for use in forefoot osteotomies and midfoot and forefoot fusions. The staple design can be divided into “Mechanical Compression” or “Shape Memory”. Although they are becoming increasingly popular because of their ease of use, there is little data published on the effectiveness of the true compression achieved across bony surfaces. There is no data on the optimal limb-length to staple width ratio required for compression. We aimed to compare four commercially available types of compression staple and measure the compression force achieved. Methods and Materials: Compression in porcine tibia, cancellous bone substitute and perspex was compared using a load cell mounted within a simulated fusion site between two test blocks. The amplified output was continuously recorded using a datalogger and the data analysed. Two designs of “mechanical” compression staple and two designs of “shape memory” staple were tested. The effect of altering limb length on compression was also noted. Results: The “mechanical” compression staples splayed open with the limbs of both designs causing either no compression or even distraction at simulated fusion site. Distractive forces of up to 23N were recorded. By contrast, the “shape memory” staples all achieved compression at the fusion site of between 5–25N. Limb length did not appear to alter the compression force achieved. Discussion: “Mechanical” compression staples act in a similar way to basic AO principles of a 2-hole compression plate used without a lag screw technique or pre-bending. Although there is compression of the cis-cortex, the limbs of the staple splay open with a fulcrum around the bridge-limb intersection resulting in distraction of the trans-cortex. “Shape memory” staples compress both the cis- and trans-cortices along the length of the limb leading to adequate stability and compression forces across the fusion site. Conclusion: This study demonstrates that “mechanical” compression staples cause a distractive force rather than a compressive force and manufacturers should be aware that further design modifications are required to prevent this. We recommend that “shape memory” staples, standard staples or lag screws are used instead. The limb-length to staple width ratio does not appear to be important

Introduction: Compression staples are becoming increasingly popular for osteotomies and arthrodesis. Their design can be divided into “Mechanical Compression” or “Shape Memory”. However, there are no publications investigating the actual compressive forces achieved or the ideal limb-length to staple width ratio. Methods and Materials: Compression was compared using a load cell mounted within a previously validated simulated fusion site. Two designs each of “mechanical compression” and “shape memory” staples were tested and filmed. The effect of altering limb length on compression was noted. Results: Both designs of “mechanical compression” staple splayed open causing either no net compression or even distraction. Distractive forces of up to 23N were recorded. The “shape memory” staples all achieved compression at the fusion site of between 5 and 25N. Limb length did not appear to alter the compression force achieved. The outcome was not affected by the material used. Discussion: “Mechanical compression” staples act in a similar manner to the AO principle of a 2-hole compression plate used without a lag screw or pre-bending. Although there is compression of the cis-cortex, the limbs of the staple splay open with a fulcrum around the bridge-limb intersection resulting in distraction of the trans-cortex. “Shape memory” staples compress both the cis-and trans-cortices along the length of the limb leading to adequate stability and compression forces across the fusion site. Conclusion: “Mechanical compression” staples cause a distractive force rather than a compressive force and we therefore recommend that they are not relied upon for fusion and the manufacturers need to modify the product or it’s indications for use. The “shape memory” staples do provide compression and the length-to-width ratio of the staple does not appear to be important

Compression staples are a popular form of fixation for osteotomy and arthrodesis. “Mechanical Compression” or “Shape Memory” designs are commercially available. We performed a biomechanical study to assess suitability for their intended functions. Compression was measured using a load cell mounted within a simulated arthrodesis site. Two designs of mechanical compression and shape memory staples were tested and compared. The effect of altering the length of the staple limb was also assessed. Both designs of mechanical compression staple had divergence of their fixation limbs causing inconsistent compression or even distraction. The shape memory staples all achieved a consistent compressive force at the fusion site. Staple limb length did not appear to alter the compression force generated. The limbs of Mechanical Compression Staples splay open with a fulcrum at the intersection bridge. As a result, there is distraction of the far cortex and compression of the proximate cortex. Shape memory staples compress both the near and far cortices leading to stability and compression forces across the arthrodesis site

Aims. To assess the cost-effectiveness of a two-layer compression bandage versus a standard wool and crepe bandage following total knee arthroplasty, using patient-level data from the Knee Replacement Bandage Study (KReBS). Methods. A cost-utility analysis was undertaken alongside KReBS, a pragmatic, two-arm, open label, parallel-group, randomized controlled trial, in terms of the cost per quality-adjusted life year (QALY). Overall, 2,330 participants scheduled for total knee arthroplasty (TKA) were randomized to either a two-layer compression bandage or a standard wool and crepe bandage. Costs were estimated over a 12-month period from the UK NHS perspective, and health outcomes were reported as QALYs based on participants’ EuroQol five-dimesion five-level questionnaire responses. Multiple imputation was used to deal with missing data and sensitivity analyses included a complete case analysis and testing of costing assumptions, with a secondary analysis exploring the inclusion of productivity losses. Results. The base case analysis found participants in the compression bandage group accrued marginally fewer QALYs, on average, compared with those in the standard bandage group (reduction of 0.0050 QALYs (95% confidence interval (CI) -0.0051 to -0.0049)), and accumulated additional mean costs (incremental cost of £52.68 per participant (95% CI 50.56 to 54.80)). Findings remained robust to assumptions tested in sensitivity analyses, although considerable uncertainty surrounded the outcome estimates. Conclusion. Use of a two-layer compression bandage is marginally less effective in terms of health-related quality of life, and more expensive when compared with a standard bandage following TKA, so therefore is unlikely to provide a cost-effective option. Cite this article: Bone Jt Open 2024;5(7):550–559

Introduction. Vertebral compression fractures are the most common type of osteoporotic fracture. Though 89% of clinical fractures occur anteriorly, it is challenging to replicate these ex vivo with the underlying intervertebral discs (IVDs) present. Furthermore, the role of disc degeneration in this mechanism is poorly understood. Understanding how disc morphology alters vertebral strain distributions may lead to the utilisation of IVD metrics in fracture prediction, or inform surgical decision-making regarding instrumentation type and placement. Aim. To determine the effect of disc degeneration on the vertebral trabecular bone strain distributions in axial compression and flexion loading. Methods. Eight cadaveric thoracolumbar segments (T11-L3) were prepared (N=4 axial compression, N=4 flexion). µCT-based digital volume correlation was used to quantify trabecular strains. A bespoke loading device fixed specimens at the resultant displacement when loaded to 50N and 800N. Flexion was achieved by adding 6° wedges. Disc degeneration was quantified with Pfirrmann grading and T2 relaxation times. Results. Anterior axial strains were 80.9±39% higher than the posterior region in flexion (p<0.01), the ratio of which was correlated with T2 relaxation time (R. 2. =0.80, p<0.05). In flexion, the central-to-peripheral axial strain ratio in the endplate region was significantly higher when the underlying IVDs were non-degenerated relative to degenerated (+38.1±12%, p<0.05). No significant differences were observed in axial compression. Conclusion. Disc degeneration is a stronger determinant of the trabecular strain distribution when flexion is applied. Load transfer through non-degenerate IVDs under flexion appears to be more centralised, suggesting that disc degeneration predisposes flexion-type compression fractures by shifting high strains anteriorly. Conflicts of interest. The authors declare none. Sources of funding. This work was funded by the Engineering & Physical Sciences Research Council (EP/V029452/1), and Back-to-Back

Introduction. Continuous compression implants (CCIs) are small memory alloy bone staples that can provide continuous compression across a fracture site, which change shape due to temperature changes. Reviews of CCIs in orthopaedics have documented their use in mainly foot and ankle surgery, with very limited descriptions in trauma. They could be beneficial in the management of complex or open injuries due to their low profile and quick insertion time. The aim of this case series were to clarify the use of CCIs in modern day limb reconstruction practice. Materials & Methods. This was a single centred study looking retrospectively at prospective data for patients who were treated for an acute fracture or non-union with a CCI between September 2019 and May 2023. Primary outcome was to determine the function and indication of the CCI as judged retrospectively and secondary outcomes investigated unplanned returns to theatre for infection or CCI failure. Results. Sixty patients were eligible with a mean age of 44.2 (range 8–89). Fifty-one patients were treated for acute fractures, nine for non-unions; and almost half (27 patients) had open injuries. There were seven different sites for treatment with a CCI, the most common being tibia (25 patients) and humerus (14 patients). Of the 122 CCIs used, 80 were used as adjuncts for fixation in 48 patients. Their indication as an adjunct fell into three distrinct categories – reduction of fracture (39 CCIs), fixation of key fragments (38 CCIs) and compression (3 CCIs). Of these 48 patients, 4 patients had a frame fixation, 19 had a nail fixation, 24 patients had a plate fixation. Forty-two CCIs were used in isolation as definitive fixation, all were for midfoot dislocations expect an open iliac wing fixation from a machete attack and an isolated paediatric medial malleolus fixation. Two patients returned to theatre for infection and two due to CCI failure. Conclusions. This series has demonstrated the versality of CCIs across multiple sites of the body and for a large variety of injuries. It has identified, when not used in isolation, three main indications to support traditional orthopaedic fixations. Given the unpredictability in limb reconstruction surgery, the diversity and potential of CCIs could form part of the staple diet in the modern-day practice

Objectives. The additive use of an external modular device may improve dorsal compression forces in pelvic external fixation. This would improve the efficiency of indirect reduction and stabilization with an anterior pelvic external fixator. The purpose of this study was to determine the forces of the posterior pelvis achieved by a new device improving the application of a supraacetabular anterior external fixator compared with other constructs. Material and Method. Synthetic pelvic models were used. Complete pelvic ring instability was created by symphyseal and unilateral sacroiliac joint disruption. Four different constructs of fixation were tested. A pressure-sensitive film was placed in the sacroiliac joint. The constructs were applied in a standardized way. The maximum sacroiliacal compression loads (N) of each trial was recorded. Statistics was performed with the student t-test. Results. Standard supraacetabular two-pin external fixator achieved a dorsal compression load of 13.84 (SD 8.13). The new dorsal pelvic compression device delivered 177.05N (SD 32.32) of load across the sacroiliac joint when the pins were inserted half way and 183.58N (SD 46.64) with full pin insertion. Both the half- and full-pin construct demonstrated a significant dorsal load improvement with the pelvic compressor (p<0.05) compared with the standard supraacetabular fixator group. The C-clamp revealed compression forces of 384.88N (SD 22.95), which was significantly greater than all the other groups (p<0.05). Conclusion. We tested a simple and new modular device for improved application of pelvic external fixation. The centres of rotation of supra-acetabular pins were determined and used to achieve greater dorsal compression forces in disrupted pelvic ring injuries. The compression load is less than with a C-Clamp, but significantly greater than the familiar technique of standard external supra-acetabular fixation. This improves the initial stability in acute management of unstable, disrupted and life threatening pelvic ring fractures

Intervertebral disc (IVD) degeneration is inadequately understood due to the lack of in vitro systems that fully mimic the mechanical and biological complexity of this organ. We have recently made an advancement by developing a bioreactor able to simulate physiological, multiaxial IVD loading and maintain the biological environment in ex vivo IVD models [1]. To validate this new bioreactor system, we simulated natural spine movement by loading 12 bovine IVDs under a combination of static compression (0.1 MPa), cyclic flexion/extension (±3˚, ±6˚ or 0-6˚) and cyclic torsion (±2˚, ±4˚ or 0-4˚) for more than 10’000 (0.2 Hz) or 100’000 (1 Hz) cycles over 14 days. A higher number of cycles increased the release of glycosaminoglycans and nitric oxide, as an inflammation marker, whereas fewer cycles maintained these two factors at physiological levels. All applied protocols upregulated the expression of MMP13 in the outermost annulus fibrosus (AF), indicating a collagen degradation response. This was supported by fissures observed in the AF after a longer loading duration. Increasing loading cycles induced high cell death in the nucleus pulposus and inner AF, while with fewer cycles, high cell viability was maintained in all IVD regions, irrespective of the magnitude of rotation. Less frequent multiaxial loading maintains IVD homeostasis while more frequent loading initiates an IVD degenerative profile. Specifically, the morphological and molecular changes were localized in the AF, which can be associated with combined flexion/extension and torsion. More loading cycles induced region-specific cell death and a higher release of extracellular matrix molecules from the innermost IVD regions, likely associated with longer exposure to static compression. Altogether, we demonstrated the advantages of the multiaxial bioreactor to study region-specific response in the IVD, which will allow a more profound investigation of IVD degeneration under different combinations of motions

Objectives. The ability to determine human bone stiffness is of clinical relevance in many fields, including bone quality assessment and orthopaedic prosthesis design. Stiffness can be measured using compression testing, an experimental technique commonly used to test bone specimens in vitro. This systematic review aims to determine how best to perform compression testing of human bone. Methods. A keyword search of all English language articles up until December 2017 of compression testing of bone was undertaken in Medline, Embase, PubMed, and Scopus databases. Studies using bulk tissue, animal tissue, whole bone, or testing techniques other than compression testing were excluded. Results. A total of 4712 abstracts were retrieved, with 177 papers included in the analysis; 20 studies directly analyzed the compression testing technique to improve the accuracy of testing. Several influencing factors should be considered when testing bone samples in compression. These include the method of data analysis, specimen storage, specimen preparation, testing configuration, and loading protocol. Conclusion. Compression testing is a widely used technique for measuring the stiffness of bone but there is a great deal of inter-study variation in experimental techniques across the literature. Based on best evidence from the literature, suggestions for bone compression testing are made in this review, although further studies are needed to establish standardized bone testing techniques in order to increase the comparability and reliability of bone stiffness studies. Cite this article: S. Zhao, M. Arnold, S. Ma, R. L. Abel, J. P. Cobb, U. Hansen, O. Boughton. Standardizing compression testing for measuring the stiffness of human bone. Bone Joint Res 2018;7:524–538. DOI: 10.1302/2046-3758.78.BJR-2018-0025.R1

Decellularised porcine superflexor tendon (pSFT) has been demonstrated to be a suitable scaffold for anterior cruciate ligament reconstruction[1]. While the role of collagen in tendons is well known, the mechanical role of glycosaminoglycans (GAGs) is less clear and may be altered by the decellularisation process. To determine the effects of decellularisation on pSFT GAG content and mechanical function and to investigate the consequences of GAG loss in tensile and compressive loading. pSFTs were decellularised following previous techniques [2]. For GAG removal, native pSFTs were treated with chondroitinase ABC (ChABC; 0.1U/mL, 72h). Cell and GAG removal was validated using histology and quantitative assays. Native, decellularised and ChABC treated groups (n=6) were biomechanically characterised. In tension, specimens underwent stress relaxation and strength testing using previous protocols [1]. Stress relaxation data was fitted to a modified Maxwell-Weichert model to determine time-dependent (E1 & E2) and time-independent moduli (E0). The toe and linear region moduli (Etoe, Elinear), in addition to tensile strength (UTS) and failure strain were determined from strength testing. In compression, specimens underwent confined loading conditions (ramp at 10 s-1 to 10% strain and hold). The aggregate modulus (HA) and zero-strain permeability (k0) were determined using previous techniques [3]. Data was analysed by one-way ANOVA with Tukey post-hoc test to determine significant differences between test groups (p<0.05). Quantitative assays showed no GAG reduction post-decellularisation, but a significant reduction after ChABC treatment. HA was only significantly reduced in the ChABC group. k0 was significantly higher for the ChABC group compared to decellularised. E0 was significantly reduced in the decellularised group compared to native and ChABC groups, while E1 and E2 were not different between groups. Etoe, Elinear, UTS and failure strain were not different between groups. Decellularisation does not affect GAG content or impair mechanical function in pSFT. GAG loss adversely affects pSFT compressive properties, revealing major mechanical contribution under compression, but no significant role under tension

Introduction. The risk factors for new adjacent vertebral compression fracture (NAVCF) after Vertebroplasty (VP) or Kyphoplasty (KP) for osteoporotic vertebral compression fractures (VCFs) were investigated. Materials and methods. The authors retrospectively analyzed the incidence of NAVCFs in 135 patients treated with VP or KP for osteoporotic VCFs. Study period was from 2004 to 2008 with minimum follow-up of 2 years. Possible risk factors were documented: age, gender, body mass index, bone mineral density (BMD), co-morbidities, location of treated vertebra, treatment modality and amount of bone cement injected. Anterior-posterior vertebral body height ratio, intra-discal cement leakage into the disc space and pattern of cement distribution of the initial VCF and adjacent vertebral bodies were assessed on lateral thoracolumbar radiographs by 2 independent assessors. Results. 21 patients (15.6%) had subsequent symptomatic NAVCFs with a median time to new fracture was of 125 days. There was no difference in incidence of NAVCF between VP and KP groups (P>0.05). Significant differences were found between patients with and without NAVCF in terms of age, BMD, and the proportion of cement leakage into the disc space (P < 0.05). Greater age, intra-discal cement leakage and low BMD were found in patients with NAVCF. Conclusion. The most important risk factors affecting NAVCFs were age, osteoporosis and intra-discal cement leakage

In a healthy joint, mechanical loading increases matrix synthesis and maintains cell phenotype, while reducing catabolic activities. It activates several pathways, most of them yet largely unknown, with integrins, TGF-β, canonical (Erk 1/2) and stress-activated (JNK) MAPK playing a key role. Degenerative joint diseases are characterized by Wnt upregulation and by the presence of proteolytic fibronectin fragments (FB-fs). Despite they are known to impair some of the aforementioned pathways, little is known on their modulatory effect on cartilage mechanoresponsiveness. This study aims at investigating the effect of mechanical loading in healthy and in vitro diseased cartilage models using pro-hypertrophic Wnt agonist CHIR99021 and the pro-catabolic FB-fs 30 kDa. Human primary chondrocytes from OA patients have been grown in alginate hydrogels for one week, prior to be incubated for 4 days with 3μM CHIR99021 or 1 μM FB-fs. Human cartilage explants isolated from OA patients have incubated 4 days with 3 μM CHIR99021 or 1 μM FB-fs. Both groups have then been mechanically stimulated (unconfined compression, 10% displacement, 1.5 hours, 1 Hz), using a BioDynamic bioreactor 5270 from TA Instruments. Expression of collagen type I, II and X, aggrecan, ALK-1, ALK-5, αV, α5 and β1 integrins, TGF-β1 have been assessed by Real Time-PCR and normalized with the expression of S29. Percentage of phosphorylated Smad2, Smad1 and JNK were determined through western blot. TGF-β1 content was quantified by sandwich ELISA; MMP-13 and GAG by western blot and DMMB assay, respectively. At least three biological replicates were used. ANOVA test was used for parametric analysis; Kruskal-Wallis and Mann-Whitney post hoc test for non-parametric. Preliminary data show that compression increased collagen II expression in control, but not in CHIR99021 and FB-fs pre-treated group (Fig. 1A-B). This was associated with downregulation of β1-integrin expression, which is the main collagen receptor and further regulates collagen II expression, suggesting inhibition of Erk1/2 pathway. A trend of increase expression of collagen type X after mechanical loading was observed in CHIR and FB-fs group. ALK-1 and ALK-5 showed a trend toward stronger upregulation in CHIR99021 group after compression, suggesting the activation of both Smad1/5/8 and Smad 2/3 pathways. To further investigate pathways leading to these different mechano-responses, the phosphorylation levels of Smad1 and Smad2, Erk1/2 and JNK proteins are currently being studied. Preliminary results show that Smad2, Smad1 and JNK protein levels increased in all groups after mechanical loading, independently of an increase in TGF-β1 expression or content. Compression further increased phosphorylation of Smad2, but not of Smad1, in all groups

Abstract. Introduction. Symptomatic osteochondritis dissecans (OCD) and traumatic osteochondral fractures (OCF) are treated with fixation with either metal or bioabsorbable device. We performed a comparative review of patients with OCD and traumatic OCF stabilised with Bio-Compression screws which are headless absorbable compression screws. Our aim was to determine whether there was a difference in outcomes between presentations. Methods. Retrospective single-centre cohort study of all patients with OCD and OCF treated with Bio-Compression screw between July 2017 and September 2022. All patients followed up until discharge with satisfactory clinical outcome. Primary outcome was return to theatre for ongoing pain or mechanical symptoms. Secondary outcome was evidence of fixation failure on follow-up MRI scan. Results. 20 patients included; 8 OCF and 12 OCD. Average age 21 (OCF), 24 (OCD). The most common location was patella (58%) in OCF or the medial femoral condyle (75%) in OCD. Traumatic defects were smaller (2.6cm2 vs 3.3cm2) although this was not statistically significant (p=0.28). In the OCF group one patient went on to have further surgery. There were no re-operations in the OCD group. Both groups had good outcomes and similar times to discharge. There was no evidence of fixation failure of Bio-Compression screws on MRI scans. Conclusions. Within the limits of this relatively small cohort there is no significant difference between outcomes for OCD or traumatic OCF fixation with Bio-Compression screws. Both groups demonstrate good outcomes irrespective of the location or the aetiology of the fragment

Patients awaiting resolution of swelling and oedema prior to ankle surgery can represent a significant burden on hospital beds. Our study assessed whether external pneumatic intermittent compression (EPIC) can reduce delays to surgery. Our prospective randomised controlled trial (n= 20) compared outcomes of patients treated with EPIC vs control group managed with ice and elevation. Included were patients aged <18 years with isolated closed ankle fractures admitted for management of swelling prior to surgery. Excluded were open fractures, injuries to contralateral leg, diabetes, absent pulses, peripheral vascular disease, inability to consent, no requirement for admission. Eligible patients were randomised to active or control arms. All patients were managed initially with reduction and back slab application. Patients in active arm fitted with EPIC (Hydroven 3000) device over the back slab. Assessment by treating team determined the time at which patient is assessed ready for surgery. Patients in the treatment arm were assessed as ready for surgery sooner, (123 hrs vs 168hrs, T score = 1.925, P 0.035) and had a shorter time to surgery (167 hrs vs 216 hrs, T score = 1.748, P 0.047) Length of stay was reduced bud did not reach statistical significance. (259 hrs vs 269 hrs, T score 0.229, P 0.41). Our results showed a statistically and clinically significant reduction in time that patients were assessed ready for surgery and time to surgery in the treatment cohort. We conclude that although further data is needed to achieve an adequately powered study and assess the safety profile of the EPIC, incorporation of EPIC into routine clinical practice has the potential for significant cost savings

Distal interphalangeal joint (DIPJ) fusion using a k-wire has been the gold standard treatment for DIPJ arthritis. Recent studies have shown similar patient outcomes with the headless compression screws (HCS), however there has been no cost analysis to compare the two. Therefore, this study aims to 1) review the cost of DIPJ fusion between k-wire and HCS 2) compare functional outcome and patient satisfaction between the two groups. A retrospective review was performed over a nine-year period from 2012-2021 in Counties Manukau. Cost analysis was performed between patients who underwent DIPJ fusion with either HCS or k-wire. Costs included were surgical cost, repeat operations and follow-up clinic costs. The difference in pre-operative and post-operative functional and pain scores were also compared using the patient rate wrist/hand evaluation (PRWHE). Of the 85 eligible patients, 49 underwent fusion with k-wires and 36 had HCS. The overall cost was significantly lower in the HCS group which was 6554 New Zealand Dollars (NZD), whereas this was 10408 NZD in the k-wire group (p<0.0001). The adjusted relative risk of 1.3 indicate that the cost of k-wires is 1.3 times more than HCS (P=0.0053). The patients’ post-operative PRWHE pain (−22 vs −18, p<0.0001) and functional scores (−38 vs −36, p<0.0001) improved significantly in HCS group compared to the k-wire group. Literatures have shown similar DIPJ fusion outcomes between k-wire and HCS. K-wires often need to be removed post-operatively due to the metalware irritation. This leads to more surgical procedures and clinic follow-ups, which overall increases the cost of DIPJ fusion with k-wires. DIPJ fusion with HCS is a more cost-effective with a lower surgical and follow-up costs compared to the k-wiring technique. Patients with HCS also tend to have a significant improvement in post-operative pain and functional scores

Arthrodesis of the first metatarsophalangeal joint (MTPJ) is the most reliable surgical option, for hallux rigidus from end-stage osteoarthritis. The aim of the study was to compare the functional outcomes of memory nickel-titanium staples versus a compression plate with a cross screw construct for first MTPJ arthrodesis using the Manchester–Oxford Foot Questionnaire (MOXFQ). Patients who underwent MTPJ arthrodesis using either memory nickel-titanium staples or a compression plate with a cross screw construct were identified from the surgical lists of two orthopaedic consultants. Pre and post-operative MOXFQ questionnaire, a validated patient-reported outcome measure, was administered, and responses were analysed to derive the MOXFQ summary index. The study included 38 patients (staple group N=12 and plate and cross screw group N=26). 23 patients were female and 15 were male. Mean age was 64.8 years (SD 9.02; 40 to 82). Initial analysis showed no significant difference in preoperative MOXFQ scores between the groups (p = 0.04). Postoperatively, the staple group exhibited a mean improvement of 36.17, surpassing the plate group's mean improvement of 23. Paired t-test analysis revealed a statistically significant difference (t-score= 2.5, p = 0.008), favouring the use of staples. The findings indicate that the use of staples in MTPJ arthrodesis resulted in a significantly greater improvement in MOXFQ scores compared to plates. Further research is needed to explore the underlying factors contributing to this difference and to evaluate long-term effects on patient outcomes

The influence of rigid fixation and permanent compression on the results, the timing of fusion and rehabilitation after fractures of the femoral neck was investigated. A hip fracture is 60–80% of all fractures of the proximal femur. Despite recent advances in the treatment of this disease, the percentage of unsatisfactory outcomes as high as 25–35%. The choice of surgical treatment in femoral neck fractures in the elderly remains as controversial as it was almost 50 years ago when Speed called him as “the unsolved fracture. Hip replacement is currently the gold standard in the treatment of femoral neck fractures. But compared with the osteosynthesis operation takes more time, is accompanied by massive blood loss, sometimes the need for transfusion and a higher risk of deep wound infection. Given these facts the best is an indoor low-traumatic method of osteosynthesis locking. Compare of the results of femoral neck fractures using of osteosynthesis 3 blade nail, spongious screws and nail for permanent compression. A retrospective analysis of treatment of 252 patients from 1982 to 2015 with subcapitale and transcervical fractures of the femoral neck on the basis “RCTO named by H.J. Makazhanova”. In the research locales patients older than 40 years. All patients were divided according to the applied method of treatment: 1 group of 95 patients operated using a 3-blade-nail, in the 2nd group of 105 patients operated on spongious screws, in the 3 group of 52 patients operated nail for the permanent compression, authoring. All patients underwent x-ray examination before and after surgery. The average period from time of injury before performing the osteosynthesis amounted to 4–7 days. The follow-up period was 6–12 months. The results obtained clinically and radiographically divided into good, satisfactory, poor. Good and satisfactory results were regarded as positive, and poor results as negative. The average age of patients was 67.5 years. Among these female patients − 174 (69%), the male − 78 (31%). Traumatization more prone to elderly accounting for 206 (81.7%) cases, and only 46 (18.3%) in the middle age group. Analysis of the results of treatment showed positive results in 1 group − 69.5 %, in group 2 − 83.8 %, in group 3 − 96.2 %. In the first group of 29 (31.5 %) and in the second group of 17 (16.2 %) patients have postoperative complications: secondary displacement, nail migration, pseudarthrosis, necrosis of head. The patients of third group have postoperative complications in 2 cases (3.8 %): displacement of bone fragments according of retraumatization. Employability was restored in 1 group − 7–9 months, in group 2 - in 6–8 months, 3 group - through 6–6.5 months. 1). The method of choice for fresh fractures of the femoral neck, especially subcapital fractures in the elderly, is a minimally invasive method of closed compression osteosynthesis. 2). Comparative analysis of treatment results showed that for the consolidation and subcapital transcervical femoral neck fractures can provide rigid fixation of bone fragments. 3). The use of permanent compression is the best method, which shortens the period of consolidation

Introduction. Patients who undergo total joint arthroplasty (TJA) are at a high risk for the development of thromboembolic complications. The rate at which venous thromboembolism occurs following TJA has been reported to be between 1.3–9.4%. As a result, the utilization of prophylactic therapies is considered standard of care in this patient population. The primary purpose of the current study was to 1) evaluate patient satisfaction with the use of intermittent compression devices 2) evaluate the risk of self-reported falls secondary to the use of these devices following TJA. Methods. This is a single institution, prospective study on patients who underwent TJA at an urban, academic orthopedic specialty hospital. Patients were surveyed using an electronic patient rehabilitation application regarding their use and satisfaction with their home intermittent compression devices with a battery and power cord attachment that the patient must wear while using the devices. They were also asked if any falls or near-falls they may have experienced. Surveys were administered on postoperative Day 14, and patients were given 10 days to submit their responses. Using our institutions data warehouse, patient demographics were also collected (Table 1). Results. Survey responses were collected from 479 patients who underwent TJA between August 2018 and October 2018. Of the respondents, 278 were female and 201 were male. Approximately 79% of patients in the cohort were satisfied with their use of their compression devices compared to 21% of patients who were unsatisfied. During this time, 16% of patients (75 pts) also reported at least one tripping episode at home and 11 patients (2.3%) had at least one fall at home. Conclusion. These results suggest that patients are generally satisfied with their home intermittent compression devices. There are a significant number of trips or falls after surgery and further study examining the potential role of these devices and their cords in these falls is needed. For figures, tables, or references, please contact authors directly

Introduction and Objective. The effectiveness of anti-embolic graduated compression stockings (GCSs) has recently been questioned. The aim of this study is to systematically review all the relevant randomised controlled trials published to date. Materials and Methods. We systematically reviewed all the randomised controlled trials comparing anti-embolism stockings with no stockings. We searched the Cochrane Central Register of Controlled Trials, MEDLINE, EMBASE and CINAHL, Cochrane Musculoskeletal Injuries Group specialized register and the reference lists of articles as well as hand search results. Trials were independently assessed and data for the main outcome measures; deep vein thrombosis (DVT), pulmonary embolism and skin ulceration, were extracted by two reviewers. Results. A total of 26 relevant RCTs involving 8279 participants were systematically reviewed. The occurrence of deep vein thrombosis was 306/4159 (7.3%) with the stocking to 492/4120 (11.9%) without the stockings (RR 0.49, 95% CI 0.39–0.62). The occurrence of pulmonary embolism was also reduced from 1.2% to 0.7% (95% 0.33–0.92). This initial finding was unsound due to the potential underreporting of negative studies and the subsequent changes to clinical practice. For the three large contemporary studies involving 5171 participants, these failed to show any statistically significant reduction in thrombosis, with DVT confirmed in 158 (6.1%) participants in those allocated to stocking, as opposed to 171 (6.6%) in the control group. Conclusions. The current recommendations regarding the use of thrombo-embolic stockings need to be reconsidered, as their effectiveness at reducing the occurrence of post-operative deep vein thrombosis is minimal at best, based on the current evidence and clinical practices