header advert
Results 1 - 12 of 12
Results per page:
Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_13 | Pages 22 - 22
1 Mar 2013
Hopper N Henson F Brooks R Power J Ghose S Rushton N Wardale J
Full Access

The aim of this study was to evaluate the role of peripheral blood derived mononucleated cells (PBMC) in osteochondral repair. We compared the healing of a critical size osteochondral defect in the medial femoral condyle and lateral trochlear sulcus in an ovine model.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVI | Pages 72 - 72
1 Aug 2012
Wardale J Hopper N Ghose S Rushton N
Full Access

Mesenchymal stem cells (MSCs) have potential for therapeutic repair of cartilage and bone but still require optimization in terms of their capacity to deposit an appropriate extracellular matrix (ECM). Adult human cartilage has a limited capacity for repair and is unusual in that it is one of the few tissues where injury is not followed by an influx of monocytes. We are studying the effects of co-culturing primary monocytes with MSCs differentiating along chondrogenic lineage but in addition we needed to investigate the effects of the monocytes on the mature chondrocytes that will result from the MSCs and will also be present in the host tissue.

Human articular cartilage chondrocytes were isolated from human donors undergoing knee replacement surgery for osteoarthritis (OA) with full ethical consent. Cultures were expanded and cells used below passage five for co-culture experiments. Monocytes were prepared from fresh heparinized human blood samples by Ficoll gradient. Co-cultures consisted of either chondrocyte micromasses overlaid with monocytes, or chondrocytes and monocytes seeded together within a collagen/glycosaminoglycan scaffold (Chondromimetic, Tigenix UK). Media, cell pellets and scaffolds were analysed for extracellular matrix (ECM) proteins and proteases by dot blot, western blot, zymography and immunohistochemistry.

Human chondrocytes maintained stable micromasses and laid down an ECM for at least 40 days. Human monocytes eventually formed a proliferating cell population with a rounded morphology on top of the chondrocyte micromasses. These cells established an adherent population with a fibroblastic morphology when replated on plastic. Analysis of chondrocyte ECM proteins indicated that monocytes affected deposition of types I and II collagen, decorin and fibronectin and the overall amounts of gelatinases released. RTPCR demonstrated a decrease in type I collagen expression and a concomitant increase in MMP13 expression.

The precise interaction between monocytes and and chondrocytes has yet to be established but is thought to involve a mixture of contact and paracrine factors. In this study co-culture of monocytes with chondrocytes resulted in phenotypic changes to the chondrocytes which may warrant the inclusion of monocytes in cartilage/bone repair and also provide information as to the responses of OA chondrocytes to external stimuli.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVI | Pages 50 - 50
1 Aug 2012
Hopper N Wardale J Rushton N
Full Access

Introduction

Mesenchymal stem cells (MSC) are an attractive cell population for regeneration of mesenchymal tissue such as bone and cartilage. Various studies have demonstrated the repair capacity of MSCs and even their usefulness in treating critical size defects. Much of the work conducted on adult stem cells has focused on MSCs found within the bone marrow stroma. Adipose tissue, like bone marrow, is derived from the embryonic mesenchyme and contains a stroma that is easily isolated. The aim of the present study is to evaluate the differentiation capability of adipose-tissue derived stem cells (ASC) extracted from the infrapatellar fat pad.

Materials and Methods

Human infrapatellar fat pad tissue was obtained from patients undergoing total joint replacement for osteoarthritis with full ethical consent. A multipotent progenitor cell population was derived after collagenase digestion from the adipose tissue. The ASCs were induced to differentiate towards adipogenic, chondrogenic, and osteogenic lineages for 21 days both in normoxic and hypoxic cell culture conditions. The differentiation and multilineage potential was assessed according to cell morphology and in vitro detection of tissue-specific differentiation molecules.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVI | Pages 9 - 9
1 Aug 2012
Arumugam M Lynn A Rushton N Brooks R
Full Access

Porous collagen-glycosaminoglycan (Col/GAG) scaffolds have previously been used clinically as regeneration templates for peripheral nerves and skin[1]. For defects involving even minimal load-bearing applications however, these scaffolds do not possess the required stiffness. Calcium phosphates (CaPs) are often used as bone-graft substitutes due to their biocompatibility and direct bone-bonding ability. While CaPs have sufficient stiffness for bone-defect applications, unlike Col/GAG they lack elasticity and are very brittle. Combining these two materials produces a composite with enhanced material properties and chemical similarity to natural bone. The addition of CaP nanocrystallites into the Col/GAG matrix produces a 3-dimensional structure that maintains its structural integrity even when wet. In this study, the in vivo performance of mineralised Col/GAG composites was evaluated by implantation into a six-week ovine bone-defect model.

Four different materials were implanted; Col/GAG alone, Col/GAG with octacalcium phosphate, Col/GAG with hydroxyapatite and Col/GAG with brushite. Implants with a diameter of 9mm and length of 9mm, were placed bilaterally into the distal femoral condyle of the hind legs of thirteen sheep. This site was selected due to the large volume of load-bearing cancellous bone. Cancellous autograft was harvested from the tibial tuberosity and placed in the defect sites of two sheep as a positive control.

All animals were sacrificed after 6 weeks and tissue containing the implants was prepared for histological evaluation. Image analysis of Von Kossa stained sections showed that all mineralised Col/GAG implants had significantly more bone in the implant site than unmineralised Col/GAG but were not significantly different between CaPs. Interestingly, new bone formation often followed the structure of the porous material struts which acted as a template. The defect containing the autograft contained the greatest amount of new bone.

Conclusions

The inclusion of mineral substantially improves the osteoconductivity of Col/GAG.

No significant difference between the different calcium phosphates was seen.

Whilst these materials did not stimulate bone formation to the same extent as autograft, many bone graft procedures are carried out with allograft which performs less favourably.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVI | Pages 104 - 104
1 Aug 2012
Power J Parker M Kroger H Rushton N Loveridge N Reeve J
Full Access

Maintaining femoral neck cortical thickness may help prevent hip fracture. Fracture initiation probably starts superiorly at flaws, ie where the cortex is thinnest. Whole body computed tomography (QCT) is now being used to study cortical thickness but limited resolution (> 300 micrometers) makes in vivo estimates imprecise, whereas microscopy s resolution approaches 1 micrometer. We have therefore extended our microscopic studies on femoral neck biopsies to include men (14 cases, 26 controls) and women (50 cases, 23 controls), and here provide data on true cortical thickness in subjects with and without hip fracture.

Whole femoral neck cross-sections obtained at hemiarthroplasty (or at post-mortem in controls) were embedded in methacrylate, cut, stained and imaged at medium power. Image-J was used to define cortical boundaries and to measure cortical thicknesses at 5 degree intervals of arc from the cross-sections centre of area.

We confirmed that the mid-femoral neck (or narrow neck) site, defined as where the ratio of maximum to minimum neck diameter (max:min) is 1.4, shows great asymmetry, with the thick inferior cortical octant averaging over 3mm thickness (mean age 79 years inter-quartile range 74-85). In the superior 3 octants cortical thickness averaged 26% of that seen inferiorly. To assess statistical determinants of cortical thickness, the data were modelled with linear regression in octants after adjusting for subjects age, sex, max:min, and hip fracture status. To achieve normality of residuals the cortical thickness data were log-transformed. 95% of measured cortical thicknesses fell between 45% and 220% of the mean for octant. In the thinner, superior three octants, minimum thicknesses were just under 0.3 mm in the fracture cases ie close to 35% of the subjects mean for octant. Cases had about 17% thinner cortical thicknesses in all octants than controls, while female controls had cortical thicknesses that uniformly averaged 90% of male. In conclusion, compared to gender and age-matched controls, intra-capsular hip facture cases had generalized cortical thinning in all mid-neck octants. This disease effect contrasts markedly with the effect of normal ageing, which thins preferentially the mechanically under-loaded superior cortex and spares the infero-anterior cortex.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVI | Pages 80 - 80
1 Aug 2012
Howard D Shepherd J Moavenian A Kew S Ghose S Rushton N Wardale J
Full Access

Meniscal cartilage provides joint stabilisation, load distribution, impact absorption and decreased friction in joints that have a complex movement such as the knee. If the meniscal cartilage degrades or is surgically removed, there is a strong probability, over time, of damage to the articular surface. The ability to regenerate damaged meniscal cartilage with an implanted device that replaces the biological equivalent would allow for joint stabilisation, robust movement and reduce the risk of damage to the articular cartilage. An implant with many of the characteristics of meniscus and with the ability to integrate correctly and firmly with the surrounding tissue, would be advantageous.

Inclusion of Platelet Rich Plasma (PRP) into the scaffolds to provide a concentrated source of matrix proteins and autologous growth factors may further enhance the regenerative repair process. To investigate the suitability of the collagen scaffolds, addition of meniscal chondrocytes and or PRP was examined in vitro.

Human meniscal chondrocyte cells were isolated, via collagenase digestion, from meniscal cartilage recovered from total knee replacement surgery. Meniscal chondrocytes were cultured in vitro to expand cell numbers. PRP was produced from volunteer's blood using a centrifuge and density based platelet recovery system. Release of Platelet Derived Growth Factor type AB (PDGF-AB) was measured by ELISA as an indicator of the behaviour of the peptide growth factor component. Combinations of scaffold, meniscal chondrocytes and PRP were tested for interaction, suitability and viability.

Experiments so far have shown good biocompatibility, in vitro, as meniscal chondrocytes were able to grow within the range of scaffolds produced. Cell retention could be enhanced by addition of PRP to the scaffolds. PDGF-AB was released over 5 days from the scaffold and PRP combination.

Further studies are in progress to derive relevant scaffold modifications and combinations for practical, robust, treatment strategies.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVI | Pages 114 - 114
1 Aug 2012
Shepherd D Kauppinen K Rushton N Best S Brooks R
Full Access

The aseptic loss of bone after hip replacement is a serious problem leading to implant instability. Hydroxyapatite coating of joint replacement components produces a bond with bone and helps to reduce loosening. However, over time bone remodeling at the implant interface leads to loss of hydroxyapatite. One possible solution would be to develop a coating that reduces hydroxyapatite and bone loss. Hydroxyapatite can be chemically modified through the substitution of ions to alter the biological response. Zinc is an essential trace element that has been found to inhibit osteoclast-like cell formation and decrease bone resorption. It was hoped that by substituting zinc into the hydroxyapatite lattice, the resultant zinc-substituted hydroxyapatite (ZnHA) would inhibit ceramic resorption and the resorption of bone. The aim of this work was to investigate the effect of ZnHA on the number and activity of osteoclasts.

Discs of phase pure hydroxyapatite (PPHA), 0.37wt% ZnHA and 0.58wt% ZnHA were produced, sintered at 1100 degrees Celsius and ground with 1200 grit silicon carbide paper. They were cultured in medium containing macrophage colony stimulating factor and receptor activator of nuclear factor kappa B ligand (RANKL) for 11 and 21 days. A control disc of PPHA cultured in medium containing no RANKL was also used. On the required dates the discs were removed and the cells stained for actin with phalloidin-TRITC and the cell nuclei with 4',6-Diamidino-2-phenylindole dihydrochloride. Cells with 3 or more nuclei were classed as osteoclasts and counted using ImageJ. On day 21 after the cells had been counted, the cells were removed and the discs coated in platinum before viewing with a scanning electron microscope. Resorption areas were then measured using ImageJ.

The addition of zinc was observed to significantly decrease the number of differentiated osteoclasts after 21 days (p<0.005 for 0.58wt% ZnHA compared to PPHA and p<0.01 for 0.37wt% ZnHA compared to PPHA). The area of resorption was also significantly decreased with the addition of zinc (p<0.005 for the comparison of 0.58wt% ZnHA with PPHA)

The work found that zinc substituted hydroxyapatite reduced the number and subsequent activity of osteoclasts.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVI | Pages 14 - 14
1 Aug 2012
Barr L Henson F Getgood A Rushton N
Full Access

Background

Mechanical trauma to articular cartilage is a known risk factor for Osteoarthritis (OA). The application of single impact load (SIL) to equine articular cartilage is described as a model of early OA changes and shown to induce a damage/repair response. Recombinant Human Fibroblast Growth Factor-18 (rhFGF-18) has been previously shown to have anabolic effects on chondrocytes in vitro. The aim of this in vitro study was to ascertain the effect of rhFGF-18 on the repair response of mechanically damaged articular cartilage.

Methods

Articular cartilage discs were harvested from healthy mature horses (n=4) and subjected to single impact load using a drop tower device. The impacted explants, together with unimpacted controls were cultured in modified DMEM +/− 200ng/ml rhFGF-18 for up to 30 days. Glycosaminoglycan (GAG) release into the media was measured using the dimethylmethylene blue (DMMB) assay, aggrecan neopepitope CS846 and Collagen Propeptide II (CPII) were measured by ELISA. Histological analysis, immunohistochemistry and TUNEL staining were used to assess proteoglycan content, type II and type VI collagen localisation, cell morphology, repair cell number and cell death.


Bone & Joint Research
Vol. 1, Issue 7 | Pages 145 - 151
1 Jul 2012
Sharma A Meyer F Hyvonen M Best SM Cameron RE Rushton N

Objectives

There is increasing application of bone morphogenetic proteins (BMPs) owing to their role in promoting fracture healing and bone fusion. However, an optimal delivery system has yet to be identified. The aims of this study were to synthesise bioactive BMP-2, combine it with a novel α-tricalcium phosphate/poly(D,L-lactide-co-glycolide) (α-TCP/PLGA) nanocomposite and study its release from the composite.

Methods

BMP-2 was synthesised using an Escherichia coli expression system and purified. In vitro bioactivity was confirmed using C2C12 cells and an alkaline phosphatase assay. The modified solution-evaporation method was used to fabricate α-TCP/PLGA nanocomposite and this was characterised using X-ray diffraction and scanning electron microscopy. Functionalisation of α-TCP/PLGA nanocomposite by adsorption of BMP-2 was performed and release of BMP-2 was characterised using an enzyme-linked immunosorbent assay (ELISA).


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XVIII | Pages 48 - 48
1 May 2012
McNamara I Rayment A Best S Rushton N
Full Access

In vitro femoral studies have demonstrated the addition of hydroxyapatite (HA), to morcellised bone graft (MBG) decreases femoral prosthesis subsidence. However, with an increased risk of femoral fracture during the impaction of a MBG:HA mixture, possibly due to greater force transmission to the femoral cortex via the HA. The aim was to compare the hoop strains and subsidence of a 1:1 mixture of MBG:HA with pure bone allograft during impaction and subsequent endurance testing in a revision hip arthroplasty model.

Materials and methods Large Sawbone femurs were prepared to represent a femur with bone loss (Sawbones, Sweden). 12 uniaxial strain gauges were attached to each femur at 0, 90, 180 and 270 degrees, at distal, midshaft, proximal points to measure hoop strain. Impaction grafting was performed using X-Change 2 instruments and an Instron servohydaulic machine for 2 distal impactions and 4 proximal impactions for 60 impactions each.

Study groups

The study consisted of four experimental groups: 1)Pure MBG, force of 1.98 kN 2)Pure MBG, force 3.63kN. 3)1:1 mixture of MBG: porous HA (pHA), 4)1:1 mixture MBG: non porous HA (npHA). 6 samples of each group were performed.

Endurance testing

The potted femur was loaded in a manner representing the walking cycle (1.98kN) at 1 Hz for 50 000 cycles. The displacement of the femoral head during loading was measured by two displacement transducers (LVDT) were mounted on aluminum brackets to measure vertical displacement and rotation.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XVIII | Pages 23 - 23
1 May 2012
Sharma A Meyer F Hyvonen M Best S Rushton N Cameron R
Full Access

Introduction

The annual incidence of fractures in the UK is almost 4%. Bone grafting procedures and segmental bone transport have been employed for bone tissue regeneration. However, their limited availability, donor site morbidity and increased cost mean that there is still a large requirement for alternative methods and there is considerable research into regeneration using bone morphogenetic proteins (BMPs). The aims of this study are to synthesise and combine BMP-2 with a novel nanocomposite and study its release.

Materials and Methods

BMP-2 was synthesised using an E. coli expression system and purified. C2C12 cells were used to test its bioactivity using an alkaline phosphatase (ALP) assay. The modified solution evaporation method was used to fabricate 30% a-TCP/PLGA nanocomposite and it was characterized using SEM, TEM, TGA, XRD, EDX and particle size analysis. The release pattern of adsorbed BMP-2 was studied using an ELISA assay.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XVIII | Pages 33 - 33
1 May 2012
McNamara I Ong M Rayment A Brooks R Prevost T Best S Rushton N
Full Access

Problems associated with allograft are well known. The addition of hydroxyapatite (HA) to allograft has various mechanical advantages, especially within revision arthroplasty. The mixing of bone and HA results in mechanical properties different from the individual parts. However, at present the changes in material properties the mix have not been fully investigated and the optimum mixing ratio not characterized. A compressive uniaxial chamber was used to investigate the change in mechanical properties occurring with the addition of HA in varying proportions to morcellised bone graft (MBG).

Materials and methods

MBG was prepared using femoral heads donated from patients undergoing total hip replacement surgery using a bone mill in a standard manner. Non porous HA (npHA) was prepared using a precipitation method of Calcium Carbonate and Orthophosphoric acid. The porous HA, (pHA) is a 60% macroporosity HA commercially prepared.

Chamber

The uniaxial compression chamber was a 30mm diameter, steel chamber. Holes were drilled to allow fluid drainage. Loads were applied using a 10 kN load cell. Specimens were prepared in the volumetric proportions pure HA, pure MBG, 2:1, 1:1, 1:2 ratio of MBG to HA. The samples were subjected to compressive forces of incrementally increasing loads of up to 2 KN for 60 cycles. The sample was then allowed to creep under a stress of 2 kN. MBG was also tested up to forces of 7 kN. The mechanical parameters that were examined were the stiffness of the sample at the 60th cycle, (Ec60), and creep