Advertisement for orthosearch.org.uk
Results 1 - 4 of 4
Results per page:
Bone & Joint Open
Vol. 1, Issue 9 | Pages 562 - 567
14 Sep 2020
Chang JS Wignadasan W Pradhan R Kontoghiorghe C Kayani B Haddad FS

Aims

The safe resumption of elective orthopaedic surgery following the peak of the COVID-19 pandemic remains a significant challenge. A number of institutions have developed a COVID-free pathway for elective surgery patients in order to minimize the risk of viral transmission. The aim of this study is to identify the perioperative viral transmission rate in elective orthopaedic patients following the restart of elective surgery.

Methods

This is a prospective study of 121 patients who underwent elective orthopaedic procedures through a COVID-free pathway. All patients underwent a 14-day period of self-isolation, had a negative COVID-19 test within 72 hours of surgery, and underwent surgery at a COVID-free site. Baseline patient characteristics were recorded including age, American Society of Anaesthesiologists (ASA) grade, body mass index (BMI), procedure, and admission type. Patients were contacted 14 days following discharge to determine if they had had a positive COVID-19 test (COVID-confirmed) or developed symptoms consistent with COVID-19 (COVID-19-presumed).


Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_12 | Pages 52 - 52
1 Jun 2017
Pradhan R Grammatopoulos G Wilson H Asopa V Andrade T
Full Access

A modular hemiarthroplasty has a Metal-on-Metal (MoM) taper-trunnion junction, which may lead to increased wear and Adverse-Reaction-to-Metal-Debris (ARMD). To-date no wear related issues have been described in the elderly and less active that receives a hemiarthroplasty. This study aims to determine in vivo wear (i.e. serum metal ion levels) in hip hemiarthroplasty, and identify factors associated with increased wear.

This is a prospective, IRB approved, single-centre, cohort study of patients that received an uncemented, modular hemiarthroplasty of proven design for the treatment of hip fracture between 2013–2015. All, alive, patients at 12-months post-implantation with AMTS≥6 were invited to participate. Of the 125 eligible patients, 50 accepted the invitation and were reviewed, including clinical/radiological assessment, metal-ion ([Chromium (Cr) and Cobalt (Co)]) measurement and Oxford Hip Score (OHS). Acetabular erosion was graded (0–3: normal-protrusio). Metal ion levels were considered high if ≥7ppb.

The mean OHS was 37 (SD: 10). No acetabular erosion was detected in 21, whilst the remaining had either grade-1 (n=21) or grade-2 (n=8). The median Cr and Co levels were 2.9 (SD:9) and 2.2 (SD:4) respectively. There were 8 cases (16%) with high ion levels. To-date only 2 of them has an ARMD lesion, and none have been revised. Patients with metal ion levels had similar pre-fall mobility, taper- and head- size and OHS to those with low metal ion levels (p=0.2–0.7) However, all hips with high metal ion levels had evidence of acetabular erosion (≥1).

Modular Hip hemiarthroplasties and their taper-trunnion junction are not immune to high wear and ARMD despite being implanted in a less active cohort. Acetabular erosion should alert clinicians, as it is associated with 20× increased-risk of taper wear, presumably due to the increased transmitted torque. Whether the use of modular hemiarthroplasties should remain is debatable.


Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_12 | Pages 23 - 23
1 Jun 2017
Parker S Grammatopoulos G Dhaliwal K Pradhan R Marshall R Andrade A
Full Access

Degenerative hip and spine pathologies often co-exist, as Hip-Spine-Syndrome (HSS). Many patients eventually need surgery in both hip (THR) and spine [decompression-spinal-arthrodesis (DSA)]. This case-control study aims to determine whether the presence of a DSA compromised THR outcome and whether outcome of THR is better if performed prior to- (THR-1st) or after- DSA (THR-2nd).

This is a single centre, multi-surgeon, retrospective, case-control study. Of the 748 patients that underwent DSA between 2004–15, 43 patients (54 THRs) have also had a 1° THR(s) at our unit and formed the cases. Thirty-two THRs were performed prior to the DSA (THR-1st) and 22 were done following the DSA (THR-2nd). Most cases had either 1- (n=3) or 2-level (n=20) DSA. The most common DSA level was L4/5 (n=23). The mean THR-DSA interval was 3.6 years. Controls were patients (n=67) without DSA or previous spinal surgery, that had a THR in our unit over the same study period matched for age, gender and type of THR implanted.

Patient Reported Outcome Measures (PROMs) were obtained using the Oxford-Hip- and Harris-Hip-Scores (OHS/HHS), with the difference between post- and pre-operative scores defined as Δ. Outcome was compared between Cases and Controls and between THR-1st and THR-2nd Groups. Outcome measures included complications, revisions, PROMs and cup orientations achieved.

The mean age at THR was 67 years old (SD: 11) and most patients were female (n=82, 68%). The mean cup inclination and anteversion angles were 41° (SD:8) and 21° (SD:8). At a mean follow-up of 6 years, the OHS improved from OHSpre:16 (SD: 7) to OHSfu:41 (SD:10) and the HHS improved from HHSpre:51 (SD:14) to HHSfu:88 (SD:13).

A greater incidence of complications were seen in the Cases (n=10; ARMD-3, infection-4, loosening-2, dislocation-1) compared to the Controls (n=3; dislocation-2, loosening-1) (p=0.01). Consequently, more THRs required revision in the Cases (n=7) compared to the Controls (n=1) (p=0.01). There were no differences in OHSpre/OHSfu/ΔOHS/HHSpre/HHSfu/ΔHHS between cases and controls (p=0.1 – 0.9).

There were no difference in complications (7/29 Vs. 3/25; p=0.3), nor revision rates (5/29 Vs. 2/25; p=0.3) between THA-1st and THA-2nd Groups. Greater differences in PROMs were detected between the groups. The THA-1st Group, compared to the THA-2nd Group had higher OHSpre (19 Vs 12), HHSpre (54 Vs 48), OHSfu (43 Vs 32) and HHSfu (93 Vs 76), (p=0.001–0.005). However, no statistically significant difference in ΔOHS (24 Vs 17) and ΔHHS (39 Vs 26) were seen between the THA-1st and THA-2nd Groups (p=0.1).

Patients with a 1° THR and DSA, had a greater rate complications and revisions compared to a matched control. Overall, no difference in PROMs were seen between Cases and Controls. No significantly increased risk of dislocation was seen in this predominantly 1- and 2-level DSA cohort. The superior PROMs detected in the THA-1st Group provide evidence that the hip pathology should be addressed 1st (in cases with 1- or 2-level planned DSA).


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 478 - 478
1 Nov 2011
Pradhan R Rosenfeld P
Full Access

Background: Complex tibiotalar (TT) and tibiotalocalcaneal (TTC) fusions are performed for significant ankle and hindfoot arthritis and/or deformity. Literature suggests several methods of fixation including crossed screws, plates, nail and external fixation. These are technically difficult operations with reported complication rates as high as 30–80%. We present a retrospective cohort study of angle blade plate and PHILOS plate fixation for these patients in our hospital.

Methods: This study describes 21 consecutive patients with 22 TT or TTC fusions between December 2005 and May 2009. The surgery was performed for severe deformity or arthritis as a result of: osteoarthritis(2), post-traumatic arthritis(4), rheumatoid arthritis (7), Charcot arthropathy (5), avascular necrosis(1), and post traumatic avascular necrosis (3). The senior author performed all of the operations. In the first ten cases (two TT and eight TTC) an angle blade plate was used, A PHILOS plate was used in the subsequent ten cases (three TT and seven TTC). One patient had bilateral TTC fusions with a blade plate on one side and a PHILOS plate on the other. There were eight male and 13 female patients. All the procedures were performed through a lateral transfibular approach. The patients were followed up regularly with clinical and radiological evaluation until union or otherwise.

Results: Fusion was achieved in 19 out of 21 patients (90.5%) and 20 out of 22 arthrodeses (90.9%). All five TT fusions went on to union (100%). Fifteen out of 17 TTC fusions united (88.2%). One TTC fusion using an angle blade plate needed revision surgery for non-union of subtalar joint. In the PHILOS group one patient developed MRSA infection of the surgical site leading to non-union. This necessiated removal of metal and prolonged treatment with intravenous antibiotics. The patient now has a relatively painless fibrous ankylosis.

Conclusion: TT and TTC fusions are complex operations performed for severe arthritis and deformity, often on patients with significant co-morbidities. It is a salvage procedure to relieve pain and/or correct deformity of the foot and ankle. This study suggests that both the angle blade plate and PHILOS plate provide a stable fixed angle construct, which achieves a high rate of bony union with alignment correction.