To evaluate if, for orthopaedic trainees, additional cadaveric simulation training or standard training alone yields superior radiological and clinical outcomes in patients undergoing dynamic hip screw (DHS) fixation or hemiarthroplasty for hip fracture. This was a preliminary, pragmatic, multicentre, parallel group randomized controlled trial in nine secondary and tertiary NHS hospitals in England. Researchers were blinded to group allocation. Overall, 40 trainees in the West Midlands were eligible: 33 agreed to take part and were randomized, five withdrew after randomization, 13 were allocated cadaveric training, and 15 were allocated standard training. The intervention was an additional two-day cadaveric simulation course. The control group received standard on-the-job training. Primary outcome was implant position on the postoperative radiograph: tip-apex distance (mm) (DHS) and leg length discrepancy (mm) (hemiarthroplasty). Secondary clinical outcomes were procedure time, length of hospital stay, acute postoperative complication rate, and 12-month mortality. Procedure-specific secondary outcomes were intraoperative radiation dose (for DHS) and postoperative blood transfusion requirement (hemiarthroplasty).Aims
Methods
Ankle fracture fixation is commonly performed by junior trainees. Simulation training using cadavers may shorten the learning curve and result in a technically superior surgical performance. We undertook a preliminary, pragmatic, single-blinded, multicentre, randomized controlled trial of cadaveric simulation versus standard training. Primary outcome was fracture reduction on postoperative radiographs.Aims
Methods
Cup-cage constructs are one of several methods commonly used to treat severe acetabular bone loss during contemporary revision total hip arthroplasty. The purpose of this study was to provide a long-term results of the technique with emphasis on implant survivorship, radiographic results, and clinical outcomes for both full and half cup-cage reconstructions. We identified 57 patients treated with a cup-cage reconstruction for major acetabular bone loss between 2002–2012. All patients had Paprosky Type 2B through 3B bone loss, with 60% having an associated pelvic discontinuity. Thirty-one patients received a full cup-cage construct, and 26 a half cup-cage. Mean age at reconstruction was 66 years, 75% were female, and the mean BMI was 27 kg/m2. Mean follow-up was 10 years. The 10-year cumulative incidences of any revision were 14% and 12% for the full and half cup-cage construct groups, respectively. Of the 9 revisions, 3 were for dislocation, 2 for aseptic loosening and construct failure (both were pelvic discontinuities), 1 for adverse local tissue reaction, and 1 for infection with persistent pelvic discontinuity. The 10-year cumulative incidences of revision for aseptic loosening were 4.5% and 5% for the full and half cup-cage constructs, respectively. Of the unrevised cases, incomplete and non-progressive zone 3 radiolucent lines were observed in 10% of patients in each group. Three patients experienced partial motor and sensory sciatic nerve palsies (2 in the full and 1 in the half cup-cage group). Both the full and half cup-cage cohorts demonstrated significantly improved Harris hip scores. Full and half cup-cage reconstructions for major acetabular defects were successful at 10 years in regards to acetabular fixation without appreciable differences between the two techniques. However, zone 3 radiolucent lines were not uncommon in association with discontinuities, and dislocation continues to be a problem.
Instability is a common cause of failure after total hip arthroplasty. A novel reverse total hip has been developed, with a femoral cup and acetabular ball, creating enhanced mechanical stability. The purpose of this study was to assess the implant fixation using radiostereometric analysis (RSA), and the clinical safety and efficacy of this novel design. Patients with end-stage osteoarthritis were enrolled in a prospective cohort at a single centre. The cohort consisted of 11 females and 11 males with mean age of 70.6 years (SD 3.5) and BMI of 31.0 kg/m2 (SD 5.7). Implant fixation was evaluated using RSA as well as Western Ontario and McMaster Universities Osteoarthritis Index, Harris Hip Score, Oxford Hip Score, Hip disability and Osteoarthritis Outcome Score, 38-item Short Form survey, and EuroQol five-dimension health questionnaire scores at two-year follow-up. At least one acetabular screw was used in all cases. RSA markers were inserted into the innominate bone and proximal femur with imaging at six weeks (baseline) and six, 12, and 24 months. Independent-samples Aims
Methods
Cam and pincer morphologies are potential precursors to hip osteoarthritis and important contributors to non-arthritic hip pain. However, only some hips with these pathomorphologies develop symptoms and joint degeneration, and it is not clear why. Anterior impingement between the femoral head-neck contour and acetabular rim in positions of hip flexion combined with rotation is a proposed pathomechanism in these hips, but this has not been studied in active postures. Our aim was to assess the anterior impingement pathomechanism in both active and passive postures with high hip flexion that are thought to provoke impingement. We recruited nine participants with cam and/or pincer morphologies and with pain, 13 participants with cam and/or pincer morphologies and without pain, and 11 controls from a population-based cohort. We scanned hips in active squatting and passive sitting flexion, adduction, and internal rotation using open MRI and quantified anterior femoroacetabular clearance using the β angle.Aims
Methods
A multicentre, randomized, clinician-led, pragmatic, parallel-group orthopaedic trial of two surgical procedures was set up to obtain high-quality evidence of effectiveness. However, the trial faced recruitment challenges and struggled to maintain recruitment rates over 30%, although this is not unusual for surgical trials. We conducted a qualitative study with the aim of gathering information about recruitment practices to identify barriers to patient consent and participation to an orthopaedic trial. We collected 11 audio recordings of recruitment appointments and interviews of research team members (principal investigators and research nurses) from five hospitals involved in recruitment to an orthopaedic trial. We analyzed the qualitative data sets thematically with the aim of identifying aspects of informed consent and information provision that was either unclear, disrupted, or hindered trial recruitment.Aims
Methods
Septic arthritis of the native knee often results in irreversible joint damage leading to the need for a total knee arthroplasty (TKA). This study examines the mid-term risk of periprosthetic joint infection (PJI), aseptic revision, any revision, and any reoperation in primary TKAs after septic arthritis of the native knee compared to a control cohort of primary TKAs performed for osteoarthritis (OA). We retrospectively identified 215 primary TKAs performed between 1971 and 2016 at a single institution following septic arthritis of the native knee. Eighty-two percent (177 cases) were treated in a single setting, whereas a two-stage exchange arthroplasty protocol was utilized in 18% (39 cases) for ongoing or suspected active native knee septic arthritis. Each case was matched 1:1 based on age, sex, body mass index (BMI), and surgical year to a primary TKA for OA. Mean age and BMI were 63 years and 30 kg/m2, respectively. Mean follow-up was 9 years.Introduction
Methods
Instability remains a common complication following total hip arthroplasty (THA) and continues to account for the highest percentage of revisions in numerous registries. Many risk factors have been described, yet a patient-specific risk assessment tool remains elusive. The purpose of this study was to apply a machine learning algorithm to develop a patient-specific risk score capable of dynamic adjustment based on operative decisions. 22,086 THA performed between 1998–2018 were evaluated. 632 THA sustained a postoperative dislocation (2.9%). Patients were robustly characterized based on non-modifiable factors: demographics, THA indication, spinal disease, spine surgery, neurologic disease, connective tissue disease; and modifiable operative decisions: surgical approach, femoral head size, acetabular liner (standard/elevated/constrained/dual-mobility). Models were built with a binary outcome (event/no event) at 1-year and 5-year postoperatively. Inverse Probability Censoring Weighting accounted for censoring bias. An ensemble algorithm was created that included Generalized Linear Model, Generalized Additive Model, Lasso Penalized Regression, Kernel-Based Support Vector Machines, Random Forest and Optimized Gradient Boosting Machine. Convex combination of weights minimized the negative binomial log-likelihood loss function. Ten-fold cross-validation accounted for the rarity of dislocation events.Introduction
Methods
To develop a core outcome set of measurements from postoperative radiographs that can be used to assess technical skill in performing dynamic hip screw (DHS) and hemiarthroplasty, and to validate these against Van der Vleuten’s criteria for effective assessment. A Delphi exercise was undertaken at a regional major trauma centre to identify candidate measurement items. The feasibility of taking these measurements was tested by two of the authors (HKJ, GTRP). Validity and reliability were examined using the radiographs of operations performed by orthopaedic resident participants (n = 28) of a multicentre randomized controlled educational trial (ISRCTN20431944). Trainees were divided into novice and intermediate groups, defined as having performed < ten or ≥ ten cases each for DHS and hemiarthroplasty at baseline. The procedure-based assessment (PBA) global rating score was assumed as the gold standard assessment for the purposes of concurrent validity. Intra- and inter-rater reliability testing were performed on a random subset of 25 cases.Aims
Methods
The primary aim of the survey was to map the current provision of simulation training within UK and Republic of Ireland (RoI) trauma and orthopaedic (T&O) specialist training programmes to inform future design of a simulation based-curriculum. The secondary aims were to characterize; the types of simulation offered to trainees by stage of training, the sources of funding for simulation, the barriers to providing simulation in training, and to measure current research activity assessing the educational impact of simulation. The development of the survey was a collaborative effort between the authors and the British Orthopaedic Association Simulation Group. The survey items were embedded in the Performance and Opportunity Dashboard, which annually audits quality in training across several domains on behalf of the Speciality Advisory Committee (SAC). The survey was sent via email to the 30 training programme directors in March 2019. Data were retrieved and analyzed at the Warwick Clinical Trials Unit, UK.Aims
Methods
Platelet-rich plasma (PRP) is being used increasingly often in the clinical setting to treat tendon-related pathologies. Yet the optimal PRP preparations to promote tendon healing in different patient populations are poorly defined. Here, we sought to determine whether increasing the concentration of platelet-derived proteins within a derivative of PRP, platelet lysate (PL), enhances tenocyte proliferation and migration Concentrated PLs from both young (< 50 years) and aged (> 50 years) donors were prepared by exposing pooled PRP to a series of freeze-thaw cycles followed by dilution in plasma, and the levels of several platelet-derived proteins were measured using multiplex immunoassay technology. Human tenocytes were cultured with PLs to simulate a clinically relevant PRP treatment range, and cell growth and migration were assessed using DNA quantitation and gap closure assays, respectively.Objectives
Methods
First generation cephalosporins remain the gold standard perioperative antibiotic for total hip and knee arthroplasty (THA, TKA). However, some patients have documented or self-reported allergies to antibiotics, most commonly penicillin, that result in changes to perioperative antibiotic coverage. Furthermore, patients testing positive for methicillin resistant staphylococcus aureus (MRSA) represent another group where an alternative to cefazolin, typically vancomycin, is often chosen for perioperative prophylaxis. The aims of this study were to 1) characterize the antibiotic choices for perioperative prophylaxis at the time of primary TKA and THA, 2) assess the efficacy of a preoperative antibiotic allergy testing program, and 3) determine rates of periprosthetic joint infection (PJI) based on perioperative antibiotic regimen. We evaluated all patients undergoing primary TKA or THA at a single academic institution from January 2004-May 2017, yielding a cohort of 29,695 patients. A series of institutional databases were combined to determine which patients underwent antibiotic allergy testing prior to surgery, outcomes from the allergy consultation, perioperative antibiotic management strategy, and survivorship free of infection until final follow-up.Introduction
Methods
There is no literature regarding the risk of a patient developing PJI after primary TKA if the patient has previously experienced PJI of a TKA or THA in another joint. The goal of this study was to compare the risk of PJI of primary TKA in this patient population compared to matched controls. We retrospectively reviewed 95 patients (102 primary TKAs) from 2000–2014 with a history of a TKA or THA PJI in another joint. Mean age was 69 years; mean BMI was 36 kg/m2. 27% high-risk patients were on chronic antibiotic suppression. Mean follow-up was 6 years. We 1:3 matched (to age, sex, BMI, and surgical year) these to 306 primary TKAs performed in patients with a THA or TKA of another joint without a subsequent PJI. Competing risk with death was used for statistical analysis. Multivariate analysis was utilized to evaluate risk factors for PJI in the study cohort.Introduction
Methods
Two-stage revision surgery remains the gold standard as treatment for periprosthetic hip infections. The purpose of this study was to determine the rate of infection eradication after two-stage revision hip arthroplasty in patients treated with intraoperatively surgeon-molded articulating spacers as well as to foreshadow the future economical impact of these articulating antibiotic spacers to those commercially available. Thirty-five patients who underwent two-stage revision hip arthroplasty due to chronic periprosthetic infection between 2003–2014 were followed clinically and radiographically an average of 4.9 years postoperatively [2.2–9.2]. 17 male and 18 female patients with a mean age of 62 [34–82] had articulating spacers, made in the operating room, inserted at the first stage. [The overall expense of the custom-made antibiotic spacers and the commercially available spacers was calculated and compared using a student t test.]Introduction
Methods
A longitudinal study was done assessing the latest radiographs available in a series of collarless Corail uncemented stems which have reported survival rates of 95% at 20 years. Parameters scored included the degree of “Ghosting” or delamination, the Gruen, the stem fit in the femoral canal and the degree of calcar resorption. Patient and implant demographics were noted. At 3 years the loosening rate was 23% reaching 64% at 6 years after the index procedure. It was present in all age groups, with a peak in the 24 to 49 year age group. Males and females had the same occurrence. When it was present this was always in zone 1. It was present in 6% of patients in zone 7, but then always associated with zone 1 changes. High and standard off-set stems had the same loosening rates. The looser fit of the stem the higher the incidence of loosening. There was no correlation to the type of bearing surface or the degree of calcar resorption. Those patients with a BMI of 25 – 35 had lower loosening rates compared to those with higher or lower BMI's. We postulate that cancellous bone on-growth onto the hydroxyapatite coating associated with loading flexural micro-motion leads to hydroxyapatite being pulled off the smooth stem substrate in zone 1. Progressive delamination of the hydroxyapatite then occurs. The triple-tapered design though imparts continued stability. We report high loosening rates in the Corail stem and suggest a mechanism for its development.
The objectives of this study were: 1) to examine osteophyte formation, subchondral bone advance, and bone marrow lesions (BMLs) in osteoarthritis (OA)-prone Hartley guinea pigs; and 2) to assess the disease-modifying activity of an orally administered phosphocitrate ‘analogue’, Carolinas Molecule-01 (CM-01). Young Hartley guinea pigs were divided into two groups. The first group (n = 12) had drinking water and the second group (n = 9) had drinking water containing CM-01. Three guinea pigs in each group were euthanized at age six, 12, and 18 months, respectively. Three guinea pigs in the first group were euthanized aged three months as baseline control. Radiological, histological, and immunochemical examinations were performed to assess cartilage degeneration, osteophyte formation, subchondral bone advance, BMLs, and the levels of matrix metalloproteinse-13 (MMP13) protein expression in the knee joints of hind limbs.Objectives
Methods
Perthes disease is a childhood disorder often resulting in femoral head deformity. Categorical/dichotomous outcomes of deformity are typical clinically, however quantitative, continuous measures, such as Sphericity Deviation Score (SDS), are critical for studying interventions. SDS uses radiographs in two planes to quantify femoral head deformity. Limitations of SDS may include non-orthogonal planes and lost details due to projections. We applied this method in 3D, with specific objectives to: 1. Develop SDS-like sphericity measures from 3D data 2. Obtain 2D and 3D sphericity for normal and Perthes hips 3. Compare slice-based (3D) and projection-based (2D) sphericity CT images of 16 normal (8 subjects) and 5 Perthes hips (4 subjects) were segmented to create 3D hip models. Ethics board approval was obtained for this study. SDS consists of roundness error (RE) in two planes and ellipsoid deformation (ED) between planes. We implemented a modified SDS which was applied to (a) orthogonal projections simulating radiographs (sagittal/coronal; 2D-mSDS), and (b) largest radii slices (sagittal/coronal; 3D-mSDS). Mean 2D-mSDS was higher for Perthes (27.2 (SD 11.4)) than normal (11.9 (SD 4.1)). Mean 3D-mSDS showed similar trends, but was higher than 2D (Perthes 33.6 (SD 5.3), normals 17.0 (SD 3.1)). Unlike 2D-mSDS, 3D-mSDS showed no overlap between groups. For Perthes hips, 2D-mSDS was consistent with SDS. For normal hips, 2D-mSDS was higher than expected (similar to Stulberg II). Projection-based (2D) measures may produce lower mSDS due to spatial averaging. Slice-based (3D) measures may better distinguish between normal and Perthes shapes, which may better differentiate effectiveness of treatments.
We aimed to determine the effect of surgical approach on the
histology of the femoral head following resurfacing of the hip. We performed a histological assessment of the bone under the
femoral component taken from retrieval specimens of patients having
revision surgery following resurfacing of the hip. We compared the
number of empty lacunae in specimens from patients who had originally
had a posterior surgical approach with the number in patients having alternative
surgical approaches.Objectives
Methods
This paper presents a methodology for measuring the femoro-pelvic joint angle based on We scanned a healthy subject in a lying position in a 3T MRI scanner to obtain high resolution (HR) images including two transverse T1-weighted TSE sequence scans at the pelvis and knee and a sagittal T1-weighted dual sense scan at the hip joint. We then scanned the same subject in a weight-bearing configuration in a 0.5T open MRI scanner to obtain related low resolution (LR) images of the femur and acetabulum. Four scan cycles were obtained with the subject being removed and reinserted between cycles in the Open MRI scanner. In each cycle, a block was inserted (up position) and removed (down position) under the subject's foot. The femur and acetabulum bone models were manually segmented and the models from the LR (sitting) images were registered to the HR (supine) images. The femoroacetabular angles relative to the LR scanning plane for four cycles were calculated. The femoral angle relative to the scanner were quite repeatable (SD < 0.9°), the pelvic angles less so (SD ∼2.6–4.3°). The hip flexion angle ranged from 23°–34° in the down and up positions, respectively, so the block induced a mean angle change in the flexion direction of approximately 11° (SD = 1.7°). We found that the femoral position could be accurately re-acquired upon repositioning, while the pelvic position was notably more variable. Limb position changes induced by inserting a block under the subject's foot were consistent (standard deviations in the relative attitude angles under 2°). Overall, our measurement method produces plausible measures of both the femoroacetabular angles and the changes induced by the block, and the reproducibility of relative joint changes is good. ACKNOWLEDGMENTS: Dr. Kang was supported by the National Science and Engineering Research Council of Canada (NSERC) through a Postdoctoral Fellowship and conducted her research at the Centre for Hip Health and Mobility at Vancouver General Hospital, Canada.
The undulating pattern of the distal femur is well recognized. Radiographs do not always represent the full extent of the undulations. With recent increasing use of guided growth technique in the distal femur, it is important to define safe zones for screw placement. We performed an anatomical study on 26 cadaveric distal femoral epiphyses, ages 3–18 years. High resolution three-dimensional surface scans were obtained with a laser scanner, and were analyzed to determine the absolute height of the central physeal ridge, and the central physeal ridge height with respect to the highest points medially and laterally.Purpose
Method
