Advertisement for orthosearch.org.uk
Results 1 - 15 of 15
Results per page:
Bone & Joint Research
Vol. 13, Issue 3 | Pages 124 - 126
11 Mar 2024
Shen J Wei Z Sun D Wu H Wang X Wang S Luo F Xie Z

Cite this article: Bone Joint Res 2024;13(3):124–126.


Bone & Joint Research
Vol. 12, Issue 8 | Pages 467 - 475
2 Aug 2023
Wu H Sun D Wang S Jia C Shen J Wang X Hou C Xie Z Luo F

Aims

This study was designed to characterize the recurrence incidence and risk factors of antibiotic-loaded cement spacer (ALCS) for definitive bone defect treatment in limb osteomyelitis.

Methods

We included adult patients with limb osteomyelitis who received debridement and ALCS insertion into the bone defect as definitive management between 2013 and 2020 in our clinical centre. The follow-up time was at least two years. Data on patients’ demographics, clinical characteristics, and infection recurrence were retrospectively collected and analyzed.


Bone & Joint Research
Vol. 10, Issue 7 | Pages 380 - 387
5 Jul 2021
Shen J Sun D Fu J Wang S Wang X Xie Z

Aims

In contrast to operations performed for other fractures, there is a high incidence rate of surgical site infection (SSI) post-open reduction and internal fixation (ORIF) done for tibial plateau fractures (TPFs). This study investigates the effect of induced membrane technique combined with internal fixation for managing SSI in TPF patients who underwent ORIF.

Methods

From April 2013 to May 2017, 46 consecutive patients with SSI post-ORIF for TPFs were managed in our centre with an induced membrane technique. Of these, 35 patients were included for this study, with data analyzed in a retrospective manner.


Aims

Treatment of chronic osteomyelitis (COM) for young patients remains a challenge. Large bone deficiencies secondary to COM can be treated using induced membrane technique (IMT). However, it is unclear which type of bone graft is optimal. The goal of the study was to determine the clinical effectiveness of bone marrow concentrator modified allograft (BMCA) versus bone marrow aspirate mixed allograft (BMAA) for children with COM of long bones.

Methods

Between January 2013 and December 2017, 26 young patients with COM were enrolled. Different bone grafts were applied to repair bone defects secondary to IMT procedure for infection eradication. Group BMCA was administered BMCA while Group BMAA was given BMAA. The results of this case-control study were retrospectively analyzed.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_8 | Pages 100 - 100
1 May 2016
Kim S Lim Y Kwon S Sun D Kim Y Ju S
Full Access

Introduction

The acetabular cup should be properly oriented to prevent dislocation and to reduce wear and leg length discrepancy. Despite advances in surgical techniques and instrumentation, achieving proper cup placement in total hip arthroplasty (THA) is challenging with potentially large variations of cup position and limited accuracy. We evaluated whether cup placement on anatomical location ensured original center of rotation (COR) and surgeon's experiences of THA reduced variations in acetabular component positioning.

Methods

We retrospectively reviewed 145 patients (145 hips) of unilateral THAs with normal contralateral structures of acetabulum and femoral head. All surgeries were performed using the modified posterolateral approach that preserves short external rotator muscles. All of the 145 THAs were performed by two surgeons, who were in the same teaching hospital, but had differences in surgical experience and expertise for THA. The patients were divided into two groups based upon surgical experience: (1) the highly experienced surgeon's group: who had previously performed over 1000 THAs (YSK, 101 hips), and (2) the less experienced novice's group: who had performed fewer than 30 THAs (YWL, 44 hips). Real vertical distances, from the COR to the inter-tear drop line, and the real horizontal distances, from the COR to the lateral wall of the tear drop, were measured preoperatively using picture archiving communication system (PACS) based precise method. Postoperative ones were measured and equalized by use of a magnification marker placed on preoperative plain radiographs. And cup inclination was measured directly on the AP radiographs and anteversion was calculated by trigonometric functions. The patient's mean age was 52.1 years (range, 20–86).


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_10 | Pages 25 - 25
1 May 2016
Seo J Yoo O In Y Kang B Sun D Kim Y
Full Access

Introduction

Knee joint should be aligned for reconstruction of the function in Total Knee Replacement(TKR). Although a surgeon try to correct the alignment of a knee joint, sometimes varus/valgus alignment has been tried in order to reconstruct function of knee joint. As a result, the varus or valgus alignment affects to ligaments and soft tissue, and the contact condition is changed between femoral component and tibial insert. One of important factor, wear characteristics of an implant can be changed due to the contact condition. In this study, we performed static contact tests from extension to flexion in varus and valgus to define the effect to contact condition when the alignment is varus or valgus.

Methods

LOSPA TKR femoral component #6 and Tibial insert #5 manufactured by Corentec Co., Ltd. were used as test specimens. The tests have performed with adapting ASTM F2777–10 ‘Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation under High Flexion’. The test set like as Fig. 1. The load is applied at 7:3 ratio of lateral-medial by adapting gait analysis. The 5° of jig is used to compare the result in neutral, varus and valgus. The fuji films were used in tests were scanned, and the results were analyzed the compressed area and contact stress as angles of flexion in neutral stance and varus/valgus from scanning. The tests were performed 5 times per each for a reliability.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_8 | Pages 147 - 147
1 May 2016
Lee Y Lee M Choi D Sun D Yoo O
Full Access

Introduction

Open wedge high tibial osteotomy (OWHTO) is an operation by the proper load re-distribution in the treatment for medial uni-compartmental arthritis of the knee joint. However, for the proper load re-distribution, stable fixation is mandatory. For the stable fixation, plate should be contoured to the bony surface and screws should be inserted from the central area of the medial side to the hinge area of the lateral side in the proximal fragment because most failures occur at the relatively lesser supported lateral hinge area. Therefore, the purpose of this study was to evaluate the screw insertion angle and orientation that is inserted to the direction of the lateral hinge with an anatomical plate that is post-contoured with a surface geometry of the proximal tibia after the OWHTO. The hypothesis of this study was that the position and orientation would be different according to the correction degree (median value 10 mm) and surgical technique (uni-planar vs bi-planar).

Materials and Methods

Thirty-one uni-planar and thirty-eight bi-planar osteotomies were evaluated. Postoperative CT data obtained after OWHTO were used for the 3D reconstruction of the proximal tibia. Anterior dimension (L1) and posterior dimension (L2) of the proximal tibia were measured in sagittal plane from tibial spine. Screw insertion points using four holes were even distributed using L1 and L2 value. As screw insertion angle was set from four holes to lateral hinge of the ‘Safe Zone’. Those four angles were measured in the axial and coronal plane. These were compared according to the correction degree and surgical technique.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_8 | Pages 99 - 99
1 May 2016
Kim J Yoo O Seo J Jang Y Kim J Sun D Kim Y
Full Access

Introduction

A stem extension improves fixation stability of a tibial component. We need caution not to contact the tibial cortex with an offset adaptor. A symmetric tibial stem design often requires the component's re-positioning with negative effects. Therefore, the objective of this study was to validate clinical efficacy of a tibial baseplate with asymmetric stemmed position (TB-ASP) using aligning outlier rate. We hypothesized that TB-ASP design will be better aligned without unessential offset adaptor than a tibial baseplate with symmetric stemmed position (TB-SSP).

Methods

TB-ASP was designed based on the anthropometric standard model (58 female cadavers, 54.7±11.4 years)(Figure 1.). To validate the stem position, 3D bone models of 20 OA patients (71.8±7.2 years) was reconstructed. All virtual surgery has done by one surgeon with consistent surgical procedure for the analysis criteria.

An analysis of TB-ASP's aligning outlier was proceeded by following steps; 1) aligning tibial baseplate to the line from medial 1/3 tuberosity to the center of PCL, 2) selecting tibial baseplate's size for maximal bone coverage without problematic overhang, 3) trying to displace tibial baseplate and stem extension(120mm long) not to contact tibial cortex. A case invading tibial cortex was considered to be an outlier. The ratio using offset adaptor was compared to those of TB-SSP. Statistical analysis was performed using paired t-test.


Introduction

Ultra high molecular weight polyethylene (UHMWPE) has been used successfully as a bearing material in hip, knee, and shoulder joint replacements. However, there are problems to cause a failure in UHMWPE component, which are wear behavior and creep deformation. Continuous bearing motion and dynamic load have occurred to UHMWPE wear debris caused osteolysis in periprosthetic tissue and to plastic deformation of joint component, and subsequent aseptic loosening of components. Therefore, many studies have being carried out in order to reduce wear debris and to improve mechanical strength from UHMWPE, and there is tremendous improvement of mechanical property in UHMWPE from gamma irradiated conventional UHMWPE (GIPE), highly crosslinked PE (XLPE), and XLPE with vitamin E1, 2. Friction has a significant one of the factors effect on the wear and creep deformation. In this study, the short-term frictional behaviors of three typical types of GIPE, remelted XLPE (R-XLPE), and s annealed XLPE (A-XLPE), and XLPE with Vitamin E against Co-Cr alloy were compared under three levels of contact pressures which occured in hip, knee, and shoulder joints.

Methods

Friction tests were conducted with UHMWPE against Co-Cr alloy by using pin-on-disk type triboteter. For test, tribotester performed in a repeat pass rotational slidintg motion with a velocity of 60rpm. Applied contact pressure selected three kinds of levels, 5, 10, and 20MPa which were within the range of maximum contact pressures for total hip, knee, and shoulder joint replacements. To analyze the frictional effect of UHMWPE type, it conducted t-test and p-values less than 0.05 were used to determine the statistically significant difference.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_9 | Pages 2 - 2
1 May 2016
Lim Y Kwon S Sun D Kim S Kim J Choi S Kim Y
Full Access

Introduction

3-D Printing with direct metal tooling (DMT) technology was innovatively introduced in the field of surface treatment of prosthesis to improve, moreover to overcome the problems of plasma spray, hopefully resulting in opening the possibility of another page of coating technology. We presumed such modification on the surface of Co-Cr alloy by DMT would improve the ability of Co-Cr alloys to osseointegrate.

Method

We compared the in vitro and in vivo ability of cells to adhere to DMT coated Co-Cr alloy to that of two different types of surface modifications: machined and plasma spray(TPS). We performed energy-dispersive x-ray spectroscopy and scanned electron microscopy investigations to assess the structure and morphology of the surfaces. Biologic and morphologic responses to osteoblast cell lines of human were then examined by measuring cell proliferation, cell differentiation (alkaline phosphatase activity), and avb3 integrin. The cell proliferation rate, alkaline phosphatase activity, and cell adhesion in the MAO group increased in comparison to those in the machined and grit-blasted groups.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 91 - 91
1 Dec 2013
Plate JF Augart MA Bracey D Von Thaer S Allen J Sun D Poehling G Jinnah R
Full Access

Introduction

There has been renewed interest in the use of unicompartmental knee arthroplasty (UKA) for patients with limited degenerative disease of the knee due to improved surgical techniques and prosthetic design, and the desire for minimally invasive surgery. However, patient satisfaction following UKA for lateral compartment disease have been suboptimal with increased revision rates. Robotic-assisted UKA has been shown to improve precision and accuracy of component placement, which may improve outcomes of lateral UKA. The purpose of this study was to compare the outcome of robotic-assisted UKA to conventional UKA for degenerative disease of the lateral compartment with the hypothesis that robotic-assisted lateral UKA results in superior outcomes compared to conventional UKA.

Methods

The institution's joint registry was searched for patients who underwent UKA for limited degenerative disease of the lateral knee compartment between 2004 and 2012 and a total of 125 lateral UKAs were identified. The medical records of all patients were reviewed and assessed for the type of surgical procedure used (robotic-assisted versus conventional), length of hospital stay, Oxford knee score, and occurrence of revision surgery. Preoperative and postoperative radiographs were assessed for tibiofemoral angle, femoral and tibial joint line angle, posterior tibial slope, and orientation of the femoral and tibial components.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_28 | Pages 10 - 10
1 Aug 2013
Plate J Augart M Seyler T Sun D Von Thaer S Poehling G Lang J Jinnah R
Full Access

Introduction

Unicompartmental knee arthroplasty (UKA) has seen renewed interest in recent years and is a viable option for patients with limited degenerative disease of the knee as an alternative to total knee arthroplasty. However, the minimally invasive UKA procedure is challenging, and accurate component alignment is vital to long-term survival. Robotic-assisted UKA allows for greater accuracy of component placement and dynamic intraoperative ligament balancing which may improve clinical patient outcomes. The purpose of this study was to analyse the clinical outcomes in a large, consecutive cohort of patients that underwent robotic-assisted UKA at a single institution with a minimum follow-up of 2 years. The study hypothesis was that robotic-assisted UKA improves patient outcomes by decreasing the rate of revision in comparison to conventional UKA.

Materials and methods

A search of the institutional joint registry was performed to identify patients that underwent robotic-assisted UKA beginning in August 2008. The patients' electronic medical record was analysed for surgical indication, age at surgery, body mass index (BMI), and American Society of Anesthesiology Physical Status Classification System (ASA). Patient comorbidities were evaluated using the Charlson comorbidity index. Length of surgery and length of hospitalisation were assessed and clinical outcomes were evaluated using the Oxford Knee Score. In addition to postoperative follow-up assessments in clinic, patients without recent follow-up were contacted by telephone to capture the overall revision rate and time to revision.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_28 | Pages 9 - 9
1 Aug 2013
Augart M Plate J Seyler T Von Thaer S Allen J Sun D Poehling G Jinnah R
Full Access

Introduction

Unicompartmental knee arthroplasty (UKA) has seen renewed interest in recent years due to improved surgical techniques and prosthetic design, and the desire for minimally invasive surgery. For patients with limited degenerative disease, UKA offers a viable alternative to total knee arthroplasty. Historically, the outcomes of lateral compartment UKA have been inferior to medial compartment UKA, with suboptimal patient satisfaction and increased revision rates. Robotic-assisted UKA has been shown to improve precision and accuracy of component placement, which may improve outcomes of lateral UKA. The purpose of this study was to compare the outcome of robotic-assisted UKA to conventional UKA for degenerative disease of the lateral compartment. The hypothesis of the study was that robotic-assisted lateral UKA results in superior outcomes compared to conventional UKA.

Materials and methods

A search of the institution's joint registry was conducted to identify patients who underwent UKA for limited degenerative disease of the lateral knee compartment. A total of 130 lateral UKAs were identified that were performed between 2004 and 2012. The mean age of the patients was 63.1 years (range, 20 to 88); patients had a mean BMI of 29.9 (range, 18 to 48). The medical records of all patients were reviewed and assessed for the type of surgical procedure used (robotic-assisted versus conventional), length of hospital stay, Oxford knee score, and occurrence of revision surgery.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 139 - 139
1 Mar 2010
Lim Y Kwon S Sun D Kim S Kim H Kim Y
Full Access

The osseointegration of implants is related to the early interactions between osteoblastic cells and titanium surfaces. The behavior of osteoblast cells was compared on four different titanium surfaces in vitro and in vivo: machined, blasted, plasma spray and micro-arc oxidation.

X-ray diffraction and scanning electron microscope investigations were performed in order to assess the structure and morphology. Biologic and morphologic responses to the osteoblast cell lines (Saos-2) were then examined, using Promega proliferation assay, alkaline phosphatase activity, vβ3 integrin expression and cytoskeleton staining (Rhodamine-Phallodine). The analysis of gene expression for osteocalcin and collagen I was done through RT-PCR. In addition, differential histologic evaluation and interfacial strength at the bone-implant interfaces were then evaluated in the distal femur of four beagle dogs.

In conclusion, micro-arc oxidation of titanium appears to exhibit more favorable osteoblast adhesion and stronger interfacial strength than the compared groups in vitro and in vivo as well.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 108 - 108
1 Mar 2010
Lim Y Kwon S Han S Sun D Kim Y
Full Access

Modified posterior approach preserving short external rotators would be able to contribute greatly to prevent dislocation after total hip arthroplasty. We modified the posterior approach to the hip by preserving the external rotator muscles in order to enhance joint stability after total hip arthroplasty in patients with osteonecrosis of the femoral head. The aim of the this study was to determine the influence of external rotator preserving posterior approach in primary total hip replacement on early dislocation and clinical outcome.

Three hundred sixty-four primary total hip replacements were divided into two groups based on how the external rotators were treated at surgery. External rotator preservation (Group 1, 165 hips) group was compared with reattachment (Group 2, 199 hips) group by evaluating the clinical and radiographic outcome at one year postoperative. Anteversion was significantly less in Group 1 as compared to Group 2 (P < 0.001). There was no significant difference in inclination between the groups (P > 0.05 in all comparisons). No dislocations were found in 165 hips with external rotator preservation whereas dislocations was noted in 11 (3.9%) in Groups 2, respectively. Group 1 had the higher mean Harris hip score (97.2±2.9 points) as compared with Group 2(94.9±3.4).

The results of this study showed that external rotators could play an important role in preserving joint stability after total hip arthroplasty in patients with osteonecrosis of the femoral head. It can be implied that this modified posterior approach would be able to contribute greatly to prevention of dislocation, and improve clinical outcome after total hip arthroplasty.