Advertisement for orthosearch.org.uk
Results 1 - 14 of 14
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XL | Pages 158 - 158
1 Sep 2012
Sariali E Mouttet A CATONNE Y
Full Access

Introduction

A decrease of 15% in femoral off-set (FO) was reported to generate a weakness of the abductor muscle after THA, which may increase the risk of limping and dislocation. However, this value was defined under experimental conditions using a CYBEX machine, which does not correspond to daily life activities. To our best knowledge, there is no reported study about the effect of the FO alteration on the gait, following THA.

Materials and Methods

To assess the functional consequences of an alteration in the FO, a prospective comparative study was carried out and it included patients who underwent THA for primary osteoarthritis.

In order to select only patients with an isolated FO alteration, the three-dimensional hip anatomy was analysed preoperatively and post-operatively with CT-scans using HipPlan Software. Three groups were defined according to the FO alteration: 15% decrease, restored and 15% increase. The exclusion criteria were: the presence of an arthroplasty or of an associated pathology on the contra-lateral or the same limb, a spine disease and a non-restoration of the other hip parameters (center of rotation, limb length). 26 patients were included: 12 restored, 9 decreased FO and 5 increased FO. The patients were composed of 20 women and 6 men with an average age of 67.7 ± 9 years. All the patients were assessed clinically, pre-operatively and 1 year after surgery with 4 scores: the Poste Merle d'Aubigné score, the Harris score, the womac score and the quality of life score SF12.

A gait analysis was performed at 1 year follow-up using an ambulatory device (Physilog (3)) under normal walking conditions. The patients were asked to walk at their usual normal speed for 30 metres in a standardized corridor: Each limb was compared to the contra-lateral healthy limb.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 533 - 534
1 Nov 2011
Sariali E Stewart T Jin Z Fisher J
Full Access

Purpose of the study: Implantation of the acetabular socket with high inclination generates increased contract stress, wear and revision rate for total hip arthroplasty (THA). Study of ceramic-on-ceramic THA explants has revealed a high wear rate in bands, suggesting a microseparation effect generating edge loading. There have not been any studies examining the influence of the cup inclination on the contact pressures in ceramic-on-ceramic THA exposed to microseparation between the head and the cup.

Material and methods: A finite elements model of a ceramic-on-ceramic hip prosthesis was developed with ABAQUS in order to predict the surface contact and the distribution of the contract pressures, first during ideal centred function then under conditions of microseparation. A 32mm head and a radial clearance head (30μm) were used. The cup was positioned in zero anteversion and 45, 65, 70, and 90° anteversion. Progressive microseparation (0 to 500 μm) was imposed. A 2500N loading force was applied to the centre of the head.

Results: For 45° inclination, edge loading appeared for mediolateral separation greater than 30 μm and became complete for 60 μm separation. When edge loading appeared, the contact surface was elliptic. The length of the lesser axis converged towards 0.96mm; the greater axis towards 8.15mm, respectively in the anteroposterior and mediolateral directions. For inclinations of 45°, the contact pressure was 66 Mpa for the centred force. As the mediolateral separation increased, the maximal contact pressure increased, converging towards an asymptotic value of 205 MPa. Increasing the inclination angle of the cup generated an increase in the maximal contact pressure. However, this increase in contact pressure generated by the increasing inclination angle was negligible if the microseparation increased.

Discussion: Cup inclination and mediolateral laxity increase stress forces of ceramic-on-ceramic THA and should be avoided. However, the influence of the cup inclination becomes negligible beyond a separation value of 240 μm, the stress forces already having reached their asymptotic value.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 534 - 534
1 Nov 2011
Sariali E Stewart T Jin Z Fisher J
Full Access

Purpose of the study: Ceramic-on-ceramic THA explants exhibit a higher wear rate than that predicted by classical simulators. This appears to be related to edge loading, which could perhaps be reproducible in vitro by creating a microseparation between the two components. The purpose of this study was to evaluate this coefficient of friction for ceramic-on-ceramic THA with edge loading. This should enable prediction of wear in the event of microseparation.

Material and methods: Three 32mm alumina inserts (Biolox Forte Ceramtec®) were tested on a friction simulatior (Prosim®). The cup was positioned vertically (75° inclination) to reproduce edge loading. The metal-back and the acetabular insert were sectioned to avoid impingement between the neck and cup. Contact was imposed along the border of the cup, then perpendicularly to it. The tests were performed under lubrication conditions (25% bovine serum). In order to simulate severe contact pressures, the tests were also conducted with a third body inserted between the head and the edge of the cup. To obtain reference values of the centred regimen, tests were first run with identical components positioned horizontally.

Results: Edge loading was achieved for cups inclined at 75°. The coefficient of friction was 0.02±0.001 under centred conditions. For edge loading conditions, the coefficient of friction was significantly increased, to a mean 0.09±0.00 for movement along the acetabular border and 0.034±0.001 for movement perpendicular to the border. Squeaking occurred for 15 s when the third body was introduced, corresponding to a coefficient of friction 15-fold higher (0.32±0.003) than under ideal conditions.

Discussion: For the first time, the coefficient of friction of edge loading was determined under conditions of lubrication. The friction coefficient of ceramic-on-ceramic THA was greater for a very vertical cup, but remained (0.1) equivalent to the metal-on-metal coefficient under optimal conditions. When a third body was introduced, transient squeaking occurred with a very high coefficient of friction.

Conclusion: Implantation of cups with a high abduction angle induces edge loading and an increased coefficient of friction, and should be avoided.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 535 - 535
1 Nov 2011
Klouche S Sariali E Léonard P Lhotellier L Graff W Leclerc P Zeller V Desplaces N Mamoudy P
Full Access

Purpose of the study: Plurimicrobial infections account for 4 to37% of all infections of total hip arthroplasties (THA). According to data in the literature, they are the source of failure, contraindicating one-phase replacement procedures. The purpose of our study was to evaluate the results of our management practices in this group of patients and also to identify factors of risk associated with multimicrobial infection.

Material and methods: A prospective study included 116 patients with an infected THA from November 2002 to December 2006. Sixteen patients (13.8%), mean age 68±12.7 years had a plurimicrobial infection defined by having at last two interoperative bacteriological samples positive for two or more germs. Surgical treatment consisted in a single-phase replacement in seven cases, a two-phase replacement in seven, resection of the head and neck in one, and wash-out resection in one. Mean duration of the antibiotic therapy ws 91±6 days, including 46±14 days intravenously. Anaerobic germs were isolated more commonly in plurimicrobial infections than monomicrobial infections (50% versus 11%). Patients were assessed with prospectively collected data. Mean follow-up was 34±13 months, with none lost to follow-up. The main outcome was apparent cure rate of the initial infection at minimum two years follow-up, defined by the absence of clinical, biological and radiographic signs of infection, and absence of death attributable to infection or its treatment. If infection was suspected, a hip puncture or intraoperative samples confirmed the relapse (same germs) or reinfection (different germs).

Results: The cure rate was 100% for plurimicrobial infections and 97% for monomicrobial infections. There were however four reinfections in the monomicrobial group. In this series, the risk factor statistically associated with plurimicrobial infections was the presence of a fistula with an odds ratio of 5.4.

Discussion: A larger number of patients would probably enable identification of other risk factors associated with plurimicrobial infections.

Conclusion: The cure rate of plurimicrobial infections was higher than reported in the literature but for a small group of patients. The presence of a fistula was strongly associated with these plurimicrobial infections.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_IV | Pages 529 - 529
1 Oct 2010
Sariali E Fisher J Jin Z Stewart T
Full Access

Introduction: Squeaking after total hip replacement has been reported in up to 10% of patients. Some authors proposed that sound emissions from squeaking hips result from resonance of one or other or both of the metal parts and not the bearing surfaces. There is no reported in vitro study about the squeaking frequencies under lubricated regime. The goal of the study was to reproduce the squeaking in vitro under lubricated conditions, and to compare the in vitro frequencies to in vivo frequencies determined in a group of squeaking patients. The frequencies may help determining the responsible part of the noise.

Methods: Four patients, who underwent THR with a Ceramic-on-Ceramic THR (Trident®, Stryker®) presented a squeaking noise. The noise was recorded and analysed with acoustic software (FMaster®). In-vitro 3 alumina ceramic (Biolox Forte Ceramtec®) 32 mm diameter (Ceramconcept®) components were tested using a PROSIM® hip friction simulator. The cup was positioned with a 75° abduction angle in order to achieve edge loading conditions. The backing and the cup liner were cut with a diamond saw, in order to avoid neck-head impingement and dislocation in case of high cup abduction angles. The head was articulated ± 10° at 1 Hz with a load of 2.5kN for a duration of 300 cycles. The motion was along the edge. Tests were conducted under lubricated conditions with 25% bovine serum without and with the addition of a 3rd body alumina ceramic particle (200 μm thickness and 2 mm length).

Results: Edge loading was obtained incompletely. In-vitro, no squeaking occurred under edge loading conditions. However, with the addition of an alumina ceramic 3rd body particle in the contact region, squeaking was obtained at the beginning of the tests and stopped after ~20 seconds (dominant frequency 2.6 kHz). In-vivo, recordings had a dominant frequency ranging between 2.2 and 2.4 kHz.

Discussion: For the first time, squeaking was reproduced in vitro under lubricated conditions. In-vitro noises followed edge loading and 3rd body particles and despite, the severe conditions, squeaking was intermittent and difficult to reproduce. However, squeaking is probably more difficult to reproduce because the cup was cut and the head was fixed in the simulator, preventing vibration to occur

Squeaking noises of a similar frequency were recorded in-vitro and in-vivo. The lower frequency of squeaking recorded in-vivo, demonstrates a potential damping effect of the soft tissues. Therefore, the squeaking in the patients was probably related to the bearing surfaces and modified lubrication conditions that may be due to edge loading. The determined values of frequencies may help to analyze the squeaking patients in order to determine the mechanism generating the sound.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_IV | Pages 529 - 529
1 Oct 2010
Sariali E Catonné Y Durante E Mouttet A Pasquier G
Full Access

Introduction: Leg length and offset restoration are known to improve function after total hip arthroplasty, and to minimize the risk of dislocation and limp. Anatomic data of the hip are needed to determine specifications for prosthesis design that restore patient hip anatomy more closely. Furthermore, femoral off-set values calculated on X-Rays may be inaccurate in case of external rotational contracture or high femoral ante-version. The goal of this study was to determine three-dimensional morphological data of the hip in case of primary osteoarthritis, especially for femoral off-set.

Material and Method: 223 hips with primary osteoarthritis have been analysed using a CT-scan and a specific software (HIP-PLAN®) that allows image post-processing for re-orienting the pelvis or the femur to a standardized orientation. Femoral and acetabular anteversions were measured. The planar (2D) and three-dimensional (3D) values of femoral offset were determined. 3D values were measured as the distance between the femoral head centre and the diaphyseal femur axis; 2D values were calculated as the projection of this distance on the frontal plan.

Results: Measurements precision was good with correlation scores ranging between 0.91 and 0.99. Mean acetabular anteversion angle was 26° +/−6.6° when measured in the Anterior Pelvic Plane and 21.9° +/−6.6° in the frontal plane according to the method of Murray. Mean femoral anteversion was 21.9° +/−9.4 according to the method of Murphy. The Sum of acetabular and femoral anteversion was found to be out of the safe zone regarding dislocation risk in 47% of patients. Mean 3D femoral off-set was found to be 42.2 mm+/− 5, significantly increased by 3.5 mm +/− 2.5 when compared to the 2D femoral off-set values. Femoral off-set was above 45mm in 31% of cases and higher than 50 mm in 12% of cases. The tip of the great trochanter was located higher than the femoral head centre, at a mean distance of about 9 mm.

Discussion: When measured on X-rays, femoral off-set may be significantly under-estimated. This error is probably due to the external rotational contracture of the hip induced by osteoarthritis. If the implants are positioned using the anatomical preoperative anteversion angles, 47% of patients would not be in the safe zone regarding posterior dislocation risk.

Conclusions: Planar measurement using X-Rays underestimates significantly the femoral off-set. Neck and head modularity may be useful to achieve simultaneous restoration of femoral off-set and leg length in 12 to 31% of cases.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_IV | Pages 607 - 607
1 Oct 2010
Klouche S Mamoudy P Sariali E
Full Access

Background: The treatment of deep infection following total hip arthroplasty (THA) is long and costly. However, there are few studies in the literature analysing the cost of total hip arthroplasty revision, especially for infection. The purpose of this study was to determine the cost of THA revision performed for infection and to compare it with the cost of revision for aseptic loosening on one hand, as well as the cost of primary THA, on the other hand.

Methods: From January to December 2006, we performed in our hospital 474 primary THA, 57 revisions for aseptic loosening and 40 revisions for infection. We identified for each procedure areas of cost: preoperative evaluation, surgical procedure, medical procedure including intravenous antimicrobial therapy during hospitalization, post-operative follow-up and physiotherapy. For the costs of preoperative evaluation, we used the refunding rate of the CNAM (the public health insurance company) applicable since September 2005. The total cost of the treatment includes direct and indirect costs, corresponding to the expenses of medical and surgical entities involved in the procedure, the operating charges of the hospital and the net expenses of general services. The cost of primary total hip arthroplasty was used as the reference cost.

Results: The average duration of hospital stay was 6 days for a primary THA, 8 days for a revision for aseptic loosening and 24 days for septic revision. The rate of transfer to a hospital for care-following and physiotherapy was 55% for a primary THA, 70% for aseptic revision and 65% for septic revision. Moreover, the rate of the hospitalization at home for the septic revision after the surgery was 30%. The cost of the revision of THA for aseptic loosening was 1.4 fold the cost of primary THA. In case of septic revision, the cost was 3.3 fold.

Discussion: The economic impact of the deep infection following THA is important. The additional cost is due to a longer duration of hospital stay and rehabilitation requiring more human and material resources.

Conclusions: The cost of revision THA for infection is high. The procedures of care must be optimized in order to increase the treatment success rate and minimise the total cost.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_II | Pages 311 - 311
1 May 2010
Sariali E Mouttet A Paquier G Catonné Y
Full Access

Introduction: The goal of the study was to determine the precision of a three-dimensional pre-operative planning tool using a specific software (HIP-PLAN®) and an anatomic cementless neck-modular stem.

Method: 223 patients who underwent a primary total hip replacement had a CT Scan before and after surgery. A pre-operative three-dimensional planning based on the CT-scan was performed. A cementless cup and a neck-modular stem were used. A computational matching of the pre-operative and the post-operative CT-scans was performed in order to compare the values of the planned anteversions and the planned displacement of the hip rotation center to the post-operative values.

Results: The implanted component was the same as the one planned in 89% for the cup and 94% for the stem. For the mean femoral anteversion, there was no significant difference between the planned value (26.1° +/−11.8) and the post-operative value (26.9° +/−14.1). There was a poor correlation between the planned values and the actual ones for the acetabular cup anteversion (coefficient 0.17). The hip rotation center was restored with a precision of 0.73 mm +/3.5 horizontally and 1.2 mm +/−2 laterally. Limb length was restored with a precision of 0.3 mm +/−3.3 and the femoral off-set with a precision of 0.8 mm +/−3.1. There was no significant modification of the femoral off-set (0.07 p=0.7) which was restored or slightly increased in 93% of cases. Almost all the surgical difficulties were predicted

Conclusion: HIP-PLAN® software is a reliable three-dimensional pre-operative planning tool which allows acurate prediction of components and hip anatomy.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_II | Pages 315 - 315
1 May 2010
Sariali E Zeller V Klouche S Lhotellier L Graff W Leonard P Mamoudy P
Full Access

Introduction: The goal of the study was to evaluate our treatment protocols for peri-prosthetic infection after total hip replacement.

Méthode: A prospective study carried out between February 2003 and February 2005, included 100 patients treated for peri-prosthetic infection after total hip replacement. Debridement and prosthesis retention was performed in case of duration of symptoms of less than 14 days (11 cases), otherwise a one-stage (42 cases) or a two-stages (41 cases) prosthesis removal and re-implantation were carried out. A two-stage procedure was decided in case of important bone loss or undetermined germ. If general health state did not allow a re-implantation, an isolated prosthesis removal was performed (6 cases). Post-operatively, patients received intravenous antibiotics (6 weeks), then oral antibiotics (6 weeks). The mean follow-up was 2.2 years with no lost to follow-up. The main evaluation criteria was the rate of infection eradication with 2 years minimal follow -up. In case of a suspected new infection, a hip aspiration was performed to determine whether it was a non-eradication (same germ) or a new re-infection (other germ) which was not considered as a failure.

Results: Infection eradication rate was 95% and 100% for the one-stage surgical procedure. 5 failures were recorded (2 deaths and 3 non-eradications). However, 3 patients were re-infected with different germs. The rate of non-infected patiens at the last follow-up was 92%.

Conclusion: Our protocols were validated with a high success rate of 95%. Peri-prosthetic infection of the hip is severe even if well treated with a mortality rate of 2%.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_II | Pages 358 - 358
1 May 2010
Sariali E Lazennec J Catonné Y
Full Access

Introduction: The goal of the study was to analyse the modification of the sagittal lombo-pelvic equilibrium after total hip replacement for osteoarthritis.

Materials and Methods: The sagittal lombo-pelvic equilibrium was analysed among 89 patients who underwent total hip replacement for osteoarthritis, using lateral X-rays of the whole spine including the hips performed pre-operatively and at one year post-operatively. Reference values were calculated by carrying out the same analysis among 100 asymptomatic healthy volunteers. The studied parameters were: the sacral tilt (ST), the pelvic version (PV) and the sacral incidence (SI).

Results: The mean pre-operative value of STangle was significantly lower in the osteoarthritis group (20.6° +/−6) compared to the reference group (39.4 +/6, p< 0,00001). The mean pre-operative value of VP angle was significanlty higher in the osteoarthritis group (31°+/−8) compared to the reference group (13.5 +/−6 p < 0,00001). There was no significant difference between the two groups for the sacral incidence (p=0,3). At one year post-operatively, the sacral tilt has significantly increased by 5.5° (p< 0.00001).

Discussion: Compared to asymptomatic healthy volunteers, patients affected by osteoarthritis had a pelvic retroversion that has decreased post-operatively but still remained lower than the norm.

Conclusion: The lombo-pelvic equilibrium is different in case of osteoarthritis. After total hip replacement the pelvis remained retroverted. This phenomenon should be taken into account for the planning of total hip arthroplasty.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 103 - 104
1 Mar 2010
Sariali* E Stewart* T Jin* Z Fisher* J
Full Access

Introduction: The use of hard-on-hard hip prostheses has highlighted specific problems like the “stripe-wear” and the squeaking. Many authors have related these phenomena to a micro-separation between the cup and the head. The goal of the study was to model the hip kinematics under micro-separation regime in order to develop a computational simulator for total hip prosthesis including a joint laxity, and to use it to perform a sound analysis.

Method: A three-dimensional model of the Leeds II hip simulator was developed on ADAMS® software. A spring was used to introduce a controlled micro-separation (less than 500 microns) during the swing phase of the walking cycle. The increase of the load during the stance phase induced a relocation of the head in the cup. Values of the medial-lateral separation predicted from the model were compared to experimental data measured using a LVDT of less than 5 microns precision. Theoretical wear path predicted from the model was compared to the literature data. The frequencies of the vibratory phenomena were determined, using the Fourier transformation.

Results: There was an excellent correlation between the theoretical prediction and the experimental measurement of the medial-lateral separation during the walking cycle (0.92). Edge-loading contact occurred during 57% of the cycle according to the model and 47% according to the experimental data. Velocity and acceleration were increased during the relocation phase in a chaotic manner, leading to vibration. The contact force according to the model had also a chaotic variation during the micro-separation phase, suggesting a chattering movement. Fourier transformation showed many frequencies in the audible area.

Discussion: A three-dimensional computational model of the kinematics of the hip after total replacement was developed and validated with an excellent precision under microseparation. It highlighted possible explanations for the squeaking that may occur during either relocation phase or edge loading.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 139 - 139
1 Mar 2010
Sariali* E Stewart* T Jin* Z Fisher* J
Full Access

Introduction: The goal of the study was to compare the squeaking frequencies of Ceramic-on-Ceramic THR in-vitro and in-vivo among patients who underwent THR.

Method: Four patients, who underwent THR with a Ceramic-on-Ceramic THR (Trident®, Stryker®) presented a squeaking noise. The noise was recorded and analysed with acoustic software (FMaster®). In-vitro 2 alumina ceramic (Biolox Forte Ceramtec®) 32 mm diameter (Ceramconcept®) components were tested using a PROSIM® hip friction simulator. The cup was positioned with a 70° abduction angle in order to achieve edge loading conditions and the head was articulated ± 10° at 1 Hz with a load of 2.5kN for a duration of 300 cycles. Tests were conducted under lubricated conditions with 25% bovine serum and with the addition of a 3rd body alumina ceramic particle (200 μm thickness and 2 mm length).

Results: In-vivo, recordings had a dominant frequency ranging between 2.2 and 2.4 kHz. In-vitro no squeaking occurred under edge loading conditions. However, with the addition of an alumina ceramic 3rd body particle in the contact region squeaking was obtained at the beginning of the tests and stopped after ~20 seconds (dominant frequency 2.6 kHz).

Discussion and Conclusion: Squeaking noises of a similar frequency were recorded in-vitro and in-vivo. In-vitro noises followed edge loading and 3rd body particles and despite, the severe conditions, squeaking was intermittent and difficult to reproduce. The lower frequency of squeaking recorded in-vivo, demonstrates a potential damping effect of the soft tissues. No damage was observed on the components, however, the test duration was very short. Squeaking may be related to third body particles that could be generated by wear or impingement between the femoral neck and the metal back. Cup design seems to be of particular importance in noisy hip, leading to a high variability of squeaking rate according to the implants.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 392 - 392
1 Sep 2009
Sariali E Stewart T Jin Z Fisher J
Full Access

The use of hard-on-hard hip prostheses has highlighted specific problems like the “stripe-wear” and the squeaking. Many authors have related these phenomena to a micro-separation between the cup and the head. The goal of the study was to model the hip kinematics under micro-separation regime in order to develop a computational simulator for total hip prosthesis including a joint laxity, and to use it to perform a sound analysis.

A three-dimensional model of the Leeds II hip simulator was developed on ADAMS® software. A spring was used to introduce a controlled micro-separation (less than 500 microns) during the swing phase of the walking cycle. The increase of the load during the stance phase induced a relocation of the head in the cup. Values of the medial-lateral separation predicted from the model were compared to experimental data measured using a LVDT of less than 5 microns precision. Theoretical wear path predicted from the model was compared to the literature data. The frequencies of the vibratory phenomena were determined, using the Fourier transformation.

There was an excellent correlation between the theoretical prediction and the experimental measurement of the medial-lateral separation during the walking cycle (0.92). Edge-loading contact occurred during 57% of the cycle according to the model and 47% according to the experimental data. Velocity and acceleration were increased during the relocation phase in a chaotic manner, leading to vibration. The contact force according to the model had also a chaotic variation during the micro-separation phase, suggesting a chattering movement. Fourier transformation showed many frequencies in the audible area.

A three-dimensional computational model of the kinematics of the hip after total replacement was developed and validated with an excellent precision under micro separation. It highlighted possible explanations for the squeaking that may occur during either relocation phase or edge loading.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 392 - 392
1 Sep 2009
Sariali E Mouttet A Pasquier G Catonné Y
Full Access

The use of two-dimensional plain X-rays for preoperative planning in total hip arthroplasty is unreliable. For example, in the presence of rotational hip contracture the lateral femoral off set can be significantly under-estimated. Pre-operative planning is of particular importance when using uncemented prostheses. The aim of this study was to determine the precision of a novel 3D CT-based preoperative planning methodology with the use of a cementless modular-neck femoral stem.

Pre-operative computerised 3D planning was performed using HIP-PLAN® software for 223 patients undergoing THA with a cement-less cup and cement-less modular-neck stem. Components were chosen that best restored leg length and lateral off set. Postoperative anatomy was assessed by CT-scan and compared to the pre-operative plan.

The implanted component was the same as the planned one in 86% of cases for the cup and 94% for the stem. There was no significant difference between the mean planned femoral anteversion (26.1° +/− 11.8) and the mean postoperative anteversion (26.9° +/− 14.1) (p=0.18), with good correlation between the two (coefficient 0.8). There was poor correlation, however, between the planned values and the actual post-operative values of acetabular cup anteversion (coefficient 0.17). The rotational centre of the hip was restored with a precision of 0.73mm +/3.5 horizontally and 1.2mm +/− 2 laterally. Limb length was restored with a precision of 0.3mm +/− 3.3 and femoral off set with a precision of 0.8mm +/− 3.1. There was no significant alteration in femoral off set (0.07mm, p=0.4) which was restored in 98% of cases. Almost all of the operative difficulties encountered were predicted pre-operatively.

The precision of the three-dimensional pre-operative planning methodology investigated in this study is higher than that reported in the literature using two-dimensional X-ray templating. Cup navigation may be a useful adjunct to increase the accuracy of cup positioning.