Osteoinductive bone substitutes are in their developmental infancy and a paucity of effective grafts options persists despite clinical demand. Bone mineral substitutes such as hydroxyapatite cause minimal biological activity when compared to osteoinductive systems present biological growth factors in order to drive bone regeneration. We have previously demonstrated the in-vitro efficacy of a bioengineered system at presenting growth factors at ultra low-doses. This study aimed to translate this growth factor delivery system towards a clinically applicable implant.

Osteoinductive surfaces were engineered using plasma polymerisation of poly(ethyl acrylate) onto base materials followed by adsorption of fibronectin protein and subsequently growth factor (BMP-2). Biological activity following ethylene oxide (EO) sterilisation was evaluated using ELISAs targeted against BMP-2, cell differentiation studies and atomic force microscopy. Scaffolds were 3D printed using polycaprolactone/hydroxyapatite composites and mechanically tested using a linear compression models to calculate stress/strain. In-vivo analysis was performed using a critical defect model in 23 mice over an 8 week period. Bone formation was assessed using microCT and histological analysis. Finally, a computer modelling process was developed to convert patient CT images into surface models, then formatted into 3D-printable scaffolds to fill critical defects.

Following EO sterilisation, there was no change in scaffold surface and persistent availability of growth factors. Scaffolds showed adequate porosity for cell migration with mechanical stiffness similar to cancellous bone. Finally, the in vivo murine model demonstrated rapid bone formation with evidence of trabecular remodelling in samples presenting growth factors compared to controls.

The burden of osteoporosis (OP), and its accompanied low energy fractures, is ever increasing. Targeted therapies are under development to stem the tide of the disease, with microRNAs identified as biomarkers and potential targets. Assessing the functional capacity of bone marrow mesenchymal stromal cells (BMSC) from patients with low energy neck of femur fractures (NOF) will identify the expected outcomes to be achieved from new, targeted osteogenic therapies.

Two patient groups were assessed; low energy NOF and osteoarthritic. Bone marrow aspirates were taken at time of arthroplasty surgery. The adherent fraction was cultured and assessed by flow cytometry, microRNA expression and differentiation functionality.

Both patient groups demonstrated characteristic extracellular markers of BMSCs. 3 key markers were significantly reduced in their expression in the NOF group (CD 90, 13, 166 P=0.0286). Reduced differentiation capacity was observed in the NOF group when cultured in osteogenic and adipogenic culture medium. 105 microRNAs were seen to be significantly dysregulated, with microRNAs known to be crucial to osteogenesis and disease process such as osteoporosis abnormally expressed.

This data demonstrates the impaired functional capacity of BMSCs and their abnormal microRNA expression in patients who suffer a low energy NOF. Future targeted therapies for OP must address this to maximise their restorative effect on diseased bone. The important role microRNAs can play as biomarkers and target sites has been further reinforced.

In this presentation, the response of mesenchymal stem cells (MSCs) to nanoscale cues (e.g. topography, chemistry and vibrations) will be considered. In particular, control of MSC self-renewal and differentiation. A focus will be on a new bioreactor that has been developed, the nanokick, that delivers precise nanovibrational cues to MSC cultures in 2D and 3D, driving the cells to turn into mineralizing osteoblasts. Mechanotransductive signalling will be considered looking at ion channel mediated differentiation.

Osteoporosis is an international health and financial burden of ever increasing proportions. Current treatments limit the rate of bone resorption and reduce fracture risk, however they are often associated with significant and debilitating side effects. The most commonly used therapies also do not stimulate osteoblast activity ^1,2,3. Much current research focus is aimed at the metabolic and epigenetic pathways involved in osteoporosis. MicroRNAs have been shown to play an important role in bone homeostasis and pathophysiological conditions of the musculoskeletal system. Up-regulation of specific microRNAs has been identified in-vivo in osteoporotic patients ^4,5. It is hypothesized that modulation of specific microRNA expression may have a key role in future targeted therapies of musculoskeletal diseases. The assessment and analysis of their potential therapeutic use in Osteoporosis is of great importance, due to the burden of the disease.

We have developed a 3D osteoporotic model from human bone marrow, without the use of scaffold. Magnetic nanoparticles are utilised to form spheroids, which provides a closer representation of the in-vivo environment than monolayer culture. This model will provide the basis for analysing future microRNA experiments to assess the potential up-regulation of osteoblastogenesis without cessation of osteoclast activity.

The results of initial monolayer and spheroid experiments will be presented. Optimisation of the osteoporotic bone marrow culture conditions, involving response to differentiation medias, analysis of adipose and bone markers and cell migration in spheroid culture will be displayed. Quantitative and qualitative results, including fluorescence microscopy and in cell western, assessing the monolayer and spheroid cultures will be presented. The development of a pseudo osteoporosis model from healthy bone marrow will also be discussed. This model will form a basis of future work on microRNA targeting.

The development of improved therapies for osteoporosis is of great significance due to the predicted rise in incidence of the disease and associated fragility fractures. Targeted therapies, such as the manipulation of microRNA expression, offer the opportunity to increase osteoblastogenesis and decrease osteoclastogenesis, potentially without the associated side effects of older, systemic therapies. We believe our 3D human bone marrow derived osteoporotic model offers the closest relation to the in-vivo environment for assessment and manipulation of microRNA expression.

MiRNAs perform gene regulation that can target approximately 60% of human protein coding genes. Along with many cellular processes, miRNAs have been implicated in stem cell differentiation. Osterix (Osx), which is inhibited by mir-31, is required by MSCs for early osteoblast differentiation resulting in bone formation further downstream. We used antagomir functionalised gold nanoparticles (AuNPs) to block mir-31, which resulted in upregulation of Osx in pre-osteoblastic MG63 cells and human mesenchymal stem cells (MSCs).

We used MG63 pre-osteoblastic cell line and human MSCs. Cytotoxicity of AuNPs was assessed by MTT, and cellular uptake of AuNPs was verified by TEM and ICP-MS. Osx RNA levels were determined by Fluidigm analysis and protein expression by In Cell Western analysis.

Antagomir-functionalised AuNPs were incubated with cells for an initial 48 hours. (1) No cytotoxic effects were noted in either cell type. (2) Fluidigm analysis identified a varied gene response to antagomir delivery in both cell types, with MSCs recording a reduction of stem cell marker genes nestin, alcam, CD63, and CD44 at day 5 (indicating differentiation). (3) Osx protein levels were increased in both cell types after 48 hour incubation. (4) Downstream MSC analysis demonstrated accelerated osteogenesis at week 3 and 5 (verified by osteocalcin nodule formation) following 48 hour AuNP incubation.

RNA analysis in both cell types suggested a shift away from proliferation towards osteoblastic differentiation. This was supported by Osx protein expression, which was increased in both MG63 cells and MSCs. Finally, an increase in the late osteogenic marker (osteocalcin) was verified at weeks 3 and 5 in MSCs after AuNP incubation for 48 hours. These results collectively infer successful delivery of mir-31 antagomirs, which are blocking mir-31-mediated suppression of Osx, resulting in an early increase in Osx, which accelerates MSC osteogenesis downstream.

Hematopoietic stem cells (HSCs) reside within a specialised niche area in the bone marrow (BM). They have tremendous clinical relevance, although HSC expansion and culture ex vivo is not currently possible, reducing BM transplant success. This project expands a novel 3D MSC niche model developed in our lab to include HSCs.

MSCs were loaded with green fluorescent magnetic iron oxide (FeO₃) nanoparticles (200 nm diameter) at a concentration of 0.1 mg ml⁻¹, and incubated for 30 min over a magnet to enhance cellular uptake. The cells were washed, detached and resuspended, then transferred to a plate with magnets above. Spheroids formed within hours and were implanted into 2 mg ml⁻¹ collagen gel. HSCs were loaded with nanoparticles via incubation with suspension, and then introduced to the gel containing the spheroid. Immunostaining, BrdU and Calcein/ ethidium homodimer viability assays were performed to characterise the cells.

Cells in both monolayers and spheroids remain viable up to 7 days in culture. MSCs in monolayers and spheroids were stained with antibodies for: STRO-1, an MSC marker; SDF-1 (CXCL-12), a secreted HSC homing factor; and nestin, a marker for HSC-supportive MSCs in vitro. MSCs in spheroids retain a higher level of expression of all three for 7 days compared to MSCs in monolayers. BrdU assay results show that the MSCs are more quiescent in spheroids compared to monolayers.

Proof of principle studies are promising for the success of the proposed niche model. MSCs express a higher level of MSC markers and retain quiescence when they are in spheroids as compared to monolayers. They also express a higher level of HSC niche factor SDF-1α, which facilitates HSC migration and retention.

We have developed precision-engineered strontium eluting nanopatterned surfaces. Nanotopography has been shown to increase osteoblast differentiation, and strontium is an element similar to calcium, which has been proven to increase new bone formation and mineralization. This combination has great potential merit in fusion surgery and arthroplasty, as well as potential to reduce osteoporosis. However, osteoclast mediated osteolysis is responsible for the aseptic failure of implanted biomaterials, and there is a paucity of literature regarding osteoclast response to nanoscale surfaces. Furthermore, imbalance in osteoclast/osteoblast resorption is responsible for osteoporosis, a major healthcare burden. We aimed to assess the affect of strontium elution nanopatterned surfaces on osteoblast and osteoclast differentiation.

We developed a novel human osteoblast/osteoclast co-culture system without extraneous supplementation to closely represent the in vivo environment. We assessed the surfaces using electron microscopy (SEM), protein expression using immunofluorescence and histochemical staining and gene expression using polymerase chain reaction (PCR).

In complex co-culture significantly increased osteoblast differentiation and bone formation was noted on the strontium eluting, nanopatterned and nanopatterned strontium eluting surfaces, suggesting improved osteointegration. There was a reduction in macrophage attachment on these surfaces as well, suggesting specific anti-osteoclastogenic properties of this surface.

Our results show that osteoblast and osteoclast differentiation can be controlled through use of nanopatterned and strontium eluting surface features, with significant bone formation seen on these uniquely designed surfaces.

Material-based strategies seek to engineer synthetic microenvironments that mimic the characteristics of physiological extracellular matrices for applications in regenerative therapies, including bone repair and regeneration. In our group, we identified a specific chemistry, poly(ethyl acrylate) (PEA), able to induce the organization of fibronectin (FN), upon adsorption of the protein, into fibrillar networks similar to the physiological ones, leading to enhanced cellular response, in terms of cell adhesion and differentiation. In this work, we exploit these FN networks to capture and present growth factors (GF) in combination with the integrin binding domain of FN during bone tissue healing.

Fibrillar conformation of FN adsorbed on PEA favors the simultaneous availability of the GF binding domain (FNIII12–14) next to the integrin binding region (FNIII9–10), compared to poly(methyl acrylate) (PMA), a material with similar chemistry, where FN adopts a globular conformation. The combined exposure of specific adhesive sequences recognized by integrins and GF binding domains was found to improve the osteogenic differentiation of mesenchymal stem cells. A higher expression of bone proteins was found when BMP2 is bound or sequestered on the material surface versus its administration in the culture media in vitro. The potential of this system as recruiter of GFs was also investigated in a critical-size bone segmental defect in mouse. The synergistic integrin-GF signalling, induced by fibrillar FN, promoted bone formation in vivo with lower BMP2 doses than current technologies. Furthermore, we optimized the system for its potential use in translational research, seeking to address the clinical need of using biocompatible and biodegradable material implants. Polycaprolactone scaffolds were synthesized and coated with a thin layer of plasma- polymerized PEA that recruits and efficiently presents GF during healing of critical size defects.

The material-driven FN fibrillogenesis provides a new strategy to efficiently reduce the GF doses administrated in bone regenerative therapies.

Nanotopographical cues on Ti surfaces have been shown to elicit different cell responses such as differentiation and selective growth. Bone remodelling is a continuous process requiring specific cues for optimal bone growth and implant fixation. In addition, the prevention of biofilm formation on surgical implants is a major challenge. We have identified nanopatterns on Ti surfaces that would be optimal for both bone remodelling and for reducing risk of bacterial infection. We used primary human osteoblast/osteoclast co-cultures and seeded them on flat Ti and three Ti nanosurfaces with increasing degrees of roughness, manufactured using anodisation under alkaline conditions (for 2, 2.5 and 3 hours). Cell growth and behaviour was assessed by scanning electron microscopy (SEM), immunofluorescence microscopy, histochemistry and quantitative RT-PCR methods. Bacterial growth on the nanowire surfaces was also assessed by confocal microscopy and SEM. From the three surfaces tested, the 2 h nanowire surface supported osteoblast and, to a lesser extent, osteoclast growth and differentiation. Bacterial viability was significantly reduced on the 2h surface. Hence the 2 h surface provided optimal bone remodelling conditions while reducing infection risk, making it a favourable candidate for future implant surfaces. This work was funded by EPSRC grant EP/K034898/1.

Osteoporosis is an international health and financial burden of ever increasing proportions. Current treatments limit the rate of bone resorption and reduce fracture risk, however they are often associated with significant and debilitating side effects. The most commonly used therapies also do not stimulate osteoblast activity. Much current research focus is aimed at the metabolic and epigenetic pathways involved in osteoporosis. MicroRNAs have been shown to play an important role in bone homeostasis and pathophysiological conditions of the musculoskeletal system. Upregulation of specific microRNAs has been identified in-vivo in osteoporotic patients. It is hypothesized that modulation of specific mircoRNA expression may have a key role in future targeted therapies of musculoskeletal diseases. The assessment and analysis of their potential therapeutic use in Osteoporosis is of great importance, due to the burden of the disease.

We have developed a 3D osteoporotic model from human bone marrow, without the use of scaffold. Magnetic nanoparticles are utilised to form spheroids, which provides a closer representation of the in-vivo environment than monolayer culture. This model will provide the basis for analysing future microRNA experiments to assess the potential upregulation of osteoblastogenesis without cessation of osteoclast activity.

The results of initial monolayer and spheroid experiments will be presented. Optimisation of the osteoporotic bone marrow culture conditions, involving response to differentiation medias, analysis of adipose and bone markers and cell migration in spheroid culture will be displayed. Quantitative and qualitative results, including fluorescence microscopy and in cell western, assessing the monolayer and spheroid cultures will be presented. The development of a pseudo osteoporosis model from healthy bone marrow will also be discussed. This model will form a basis of future work on miRNA targeting.

Control of stem cell fate and function is critical for clinical and academic work. By combining surface chemistry-driven extracellular matrix (ECM) assembly with mesenchymal stem cells (MSCs) we are developing a system which can be used to regulate the behaviour of MSCs. The conformation of the ECM glycoprotein fibronectin (Fn) is different when adsorbed onto poly methylacrylate (PMA) where it is globular, and on poly ethylacrylate (PEA) where it forms a physiologically-similar network^[1] (Fig. 1). Using these polymers to govern Fn conformation, we are developing a 3D system incorporating MSC-responsive growth factors (GFs) and bone marrow MSCs capable of regulating MSC behaviour.

Toluene-dissolved PMA and PEA were spin coated onto glass coverslips before solvent extraction in vacuo and UV sterilisation. 20 mg ml⁻¹ human plasma FN was adsorbed onto the surfaces followed by 25 ng ml⁻¹ recombinant human BMP2/VEGF. FN conformations were characterised by atomic force microscopy (AFM). A collagen hydrogel was placed above the substrate. Adult human bone marrow STRO-1+ were cultured on the substrates for 3 weeks in supplemented DMEM. Expression of MSC stemness and HSC maintenance factors were analysed by In-Cell Western assay.

To establish the best combination of polymer/FN/GF, MSC stemness markers (ALCAM, NESTIN and STRO1), osteogenic differentiation markers (OCN and OPN) and bone marrow markers (SCF and VCAM1) were measured in MSCs cultured for 3-weeks on substrates. OCN, SCF, and VCAM1 expression was enhanced across all combinations compared to glass control, while for ALCAM/STRO1/NESTIN and OPN, PEA combinations enhanced their expression. PEA + FN + VEGF appeared to be system best suited to maintaining MSC stemness and supporting expression of osteogenesis markers and bone marrow markers.

We have shown that MSCs maintain their stem cells state and express high levels of SCF and VCAM-1 when cultured on PEA with adsorbed Fn and VEGF or BMP2. Next stages of this work will use PCR to verify results and analyse expression of other MSC markers to develop a role for these synthetic polymers as biomaterials.

Poly-ether-ether-ketone (PEEK) is a biomaterial commonly used for spinal implants and screws. It is often desirable for orthopaedic implants to osseointegrate, but as PEEK is biologically inert this will not occur. The aim of this project was to determine if injection mould nanopatterning can be used to create a make PEEK bioactive and stimulate osteogenesis in vitro.

PEEK substrates were fabricated by injection mould nanopatterning to produce near-square (NSQ) nanopatterned PEEK and planar (FLAT) PEEK samples. Atomic force microscopy (AFM) and scanning electron microscopy were used to characterize the surface topography. Human bone marrow stromal cells (hBMSCs) were isolated from patients undergoing primary hip replacement operations and seeded onto the PEEK substrates. After 6 weeks the cells were stained using alizarin red S (ARS) stain (to detect calcium) and the von Kossa technique (to detect phosphate) and analyzed using CellProfiler image analysis software to determine: surface coverage; cell number; and expression of either calcium (ARS stain) or phosphate (von Kossa technique).

ARS stain showed calcium expression (quantified relative to the number of cells) was increased on NSQ PEEK compared to FLAT PEEK (not statistically significant) and the surface coverage was similar. Von Kossa staining revealed more surface coverage on FLAT PEEK (69.1% cf. 31.9%), cell number was increased on FLAT PEEK (9803 ± 4066 cf. 4068 ± 1884) and phosphate expression relative to cell number was also increased (seven-fold) on NSQ PEEK (P < 0.05) compared to FLAT PEEK.

Although hBMSCs may adhere to NSQ PEEK in smaller numbers, the cells expressed a relatively larger amount of calcium and phosphate. This indicates that the cells adopted a more osteoblastic phenotype and that nanopatterning PEEK induces hBMSC differentiation and stimulates osteogenesis. Injection mould nanopatterning therefore has the potential to improve osseointegration of PEEK implants in vivo.

In biomaterial engineering the surface of an implant can influence cell differentiation, adhesion and affinity towards the implant. Increased bone marrow derived mesenchymal stromal cell (BMSC) differentiation towards bone forming osteoblasts, on contact with an implant, can improve osteointegration. The process of micropatterning has been shown to improve osteointegration in polymers, but there are few reports surrounding ceramics.

The purpose of this study was to establish a co-culture of BMSCs with osteoclast progenitor cells and to observe the response to micropatterned zirconia toughened alumina (ZTA) ceramics with 30 µm diameter pits. The aim was to establish if the pits were specifically bioactive towards osteogenesis or were generally bioactive and would also stimulate osteoclastogenesis that could potentially lead to osteolysis.

We demonstrate specific bioactivity of micropits towards osteogenesis with more nodule formation and less osteoclastogenesis. This may have a role when designing ceramic orthopaedic implants.

Background

Aseptic loosening remains the primary reason for failure of orthopaedic implants. Therefore a prime focus of Orthopaedic research is to improve osteointegration and outcomes of joint replacements. The topography of a material surface has been shown to alter cell adhesion, proliferation and growth. The use of nanotopography to promote cell adhesion and bone formation is hoped to improve osteointegration and outcomes of implants. We have previously shown that 15nm high features are bioactive. The arrangement of nanofeatures has been shown to be of importance and block-copolymer separation allows nanopillars to be anodised into the titania layer, providing a compromise of control of order and height of nanopillars. Osteoblast/osteoclast stem cell co-cultures are believed to give the most accurate representation of the in vivo environment, allowing assessment of bone remodelling related to biomaterials.

Nanoscale topography increases the bioactivity of a material and stimulates specific responses (third generation biomaterial properties) at the molecular level upon first generation (bioinert) or second generation (bioresorbable or bioactive) biomaterials.

We developed a technique (based upon the effects of nanoscale topography) that facilitated the in vitro expansion of bone graft for subsequent implantation and investigated the optimal conditions for growing new mineralised bone in vitro.

Two topographies (nanopits and nanoislands) were embossed into the bioresorbable polymer Polycaprolactone (PCL). Three dimensional cell culture was performed using double-sided embossing of substrates, seeding of both sides, and vertical positioning of substrates. The effect of Hydroxyapatite, and chemical stimulation were also examined.

Human bone marrow was harvested from hip arthroplasty patients, the mesenchymal stem cells culture expanded and used for cellular analysis of substrate bioactivity.

The cell line specificity and osteogenic behaviour was demonstrated through immunohistochemistry, confirmed by real-time PCR and quantitative PCR. Mineralisation was demonstrated using alizarin red staining.

Results showed that the osteoinduction was optimally conferred by the presence of nanotopography, and also by the incorporation of hydroxyapatite (HA) into the PCL. The nanopit topography and HA were both superior to the use of BMP2 in the production of mineralised bone tissue.

The protocol from shim production to bone marrow harvesting and vertical cell culture on nanoembossed HaPCL has been shown to be reproducible and potentially applicable to economical larger scale production.

Polyetheretherketone (PEEK) is a thermoplastic polymer that is predominant in spinal surgery as the material of choice for spinal fusion cages, and is also used for bone anchors, cruciate ligament interference screws, and femoral stems. It has the distinct advantage of having similar mechanical properties to bone, but its clinical application as implant material is limited by a lack of bioactivity. This project aims to create an PEEK surface capable of osseointegration using a surface modification technique known as oxygen plasma treatment.

PEEK surfaces were injection molded, washed and then treated in a plasma chamber for up to 10 min. Surfaces were characterised using atomic force microscopy (AFM), scanning electron microscopy (SEM), water contact angle measurements and X-ray photo-electron spectroscopy (XPS). Human bone marrow cells were cultured on the surfaces and assessed for calcium production (using alizarin red stain).

Water contact angle measurements show that after plasma treatment, the surfaces become very hydrophilic, before developing a meta-stable state at approx. 6 weeks. AFM and SEM showed destruction of the nano-pits at treatment durations longer than 2 mins. XPS detected a progressive increase in the atomic proportion of oxygen at the surface with increasing plasma treatment duration. There was significantly less alizarin uptake (and hence calcium production) on the untreated PEEK compared to the plasma treated PEEK surfaces (p < 0.05).

These results show that oxygen-plasma treatment can increase calcium production on PEEK surfaces and may improve long term osseointegration of PEEK implants.

Osteogenesis is key to fracture healing and osteointegration of implanted material. Modification of surfaces on a nanoscale has been shown to affect cell interaction with the material and can lead to preferential osteogenesis. We hypothesised that osteogenesis could be induced in a heterogeneous population of osteoprogenitor cells by circular nanopits on a material surface. Furthermore, we intended to assess any correlation between nanopit depth and osteoinductive potential.

The desired topographies were embossed onto polycaprolactone (PCL) discs using pre-fabricated nickel shims. All pits had a diameter of 30μm and investigated pit depths were 80nm, 220nm and 333nm. Scanning electron microscopy confirmed successful embossing and planar controls were shown to be flat. A bone marrow aspirate was obtained from the femoral neck of a healthy adult undergoing a hip replacement. After establishing a culture, cells were seeded onto the PCL discs, suspended in basal media and incubated. Samples were fixed and stained after three and 28 days.

Cells were stained for the adhesion molecule vinculin after three days. Lowest concentrations of vinculin were seen in the planar control group. Osteoprogenitor cells on the shallowest pits, 80nm, had larger and brighter adhesion complexes. After 28 days, osteocalcin and osteopontin expression were used as markers of cell differentiation into an osteoblastic phenotype. 220nm deep pits consistently produced cells with the highest concentrations of osteopontin (p = 0.017) with a similar trend of osteocalcin expression. Cells on all topographies had higher expression levels than the planar controls.

We demonstrated stimulation of osteogenesis in a heterogeneous population of osteoprogenitor cells. This cell mix is similar to that present in fracture healing and after reaming for intramedullary devices or uncemented implants. All nanopit depths gave promising results with an optimum depth of 220nm after 28 days.

It is well established that cell behaviour is responsive to the surrounding environment. Chemistry, material stiffness and topography allow control of cell adhesion, proliferation, growth and differentiation. Biomimicry is playing a role in the next generation of biomaterials, surface engineering on orthopaedic implants may promote improved skeletal integration.

Human osteoblasts were cultured on engineered micro-topographical features with nanoscale depths, similar in scale to an osteoclast resorption pit. Three different micro-topographies were used (in addition to planar controls.) created on a hot moulded polymer. The cells were cultured in basal media on surfaces with 20, 30 and 40 micrometer circular pits, each with a depth of 400 nanometers. The cells were fixed at time points 3 days, 21 days and 28 days to allow assessment of cytoskeletal development, production of protein markers of bone production (osteopontin) and mineral deposition respectively.

At each time point greater indicators of cell activity and bone production were evident on the 30 and 40 micrometer structures as compared with the 20 micrometer structures and the planar controls. These positive results include increased focal adhesions, stronger expression of intracellular and extracellular osteopontin and more mature nodules of calcium formation.

This in vitro study demonstrates that micro and nanotopographies influence cell activity. Osteoblast response can be induced on the surface of a future generation of orthopaedic implants, lasting long after the effects chemical application have expired. Further research is required to assess the potential application to implant grade materials.