Introduction

Meaningful clinical improvement as demonstrated through patient-reported outcome measures (PROMs) are increasingly used to evaluate success of total hip arthroplasty (THA) procedures. This patient perspective can provide a full picture when used with clinical data to best evaluate surgical outcomes.

Introduction

Patients under the age of 50 who undergo a total hip arthroplasty (THA) are at high risk for wear-related complications due to their higher activity level. Previous studies have shown that highly crosslinked polyethylene (HXLPE) is more durable with no evidence of loosening compared to conventional polyethylene due to its improved wear characteristics. Unfortunately, there are few studies with long term follow-up of HXLPE in this patient population. The purpose of this study was to evaluate two questions related to this population of patients undergoing THA. First, what were the clinical outcomes for HXLPE in patients 50 years or younger at an average follow-up of 15 years? Second, was osteolysis observed in any of these hips?

Background

Fully constrained liners are used to treat recurrent dislocations or patients at high risk after total hip replacements. However, they can cause significant morbidities including recurrent dislocations, infections, aseptic loosening and fractures. We examine long term results of 111 patients with tripolar constrained components to assess their redislocation and failure rate.

Background

High complication rates and poor outcomes have been widely reported in patients undergoing revision of large head metal-on-metal arthroplasty. A previous study from our center showed high rates of dislocation, nerve injury, early cup loosening and pseudotumor recurrence. After noting these issues, we implemented the following changes in surgical protocol in all large head MOM revisions: 1. Use of highly porous shells in all cases 2. Use of largest femoral head possible 3. Low threshold for use of dual mobility and constrained liners when abductors affected or absent posterior capsule 4. Use of ceramic head with titanium sleeve in all cases 5. Partial resection of pseudotumor adjacent to sciatic and femoral nerves.

Background

Pseudotumor or high grade ALVAL (aseptic lymphocyte-dominated vasculitis-associated lesion) development around total hip replacements secondary to local metal debris generation – especially in the setting of metal-on-metal bearings – is a well-recognised histopathologic phenomenon. Recent work has suggested a strong genetic correlation with an individual's risk of such lesion development following metal exposure. Emerging data have highlighted a similar potential concern around total knee replacements (TKRs), particularly with increasing construct modularity. To date, the body-of-knowledge pertaining to TKR-associated ALVALs has largely been limited to individual case reports or small retrospective case series’, with no large-scale investigation looking at this potential complication. This study sought to establish the preliminary prevalence of pseudotumor or high grade ALVAL formation seen at the revision of primary TKRs and to establish the correlation between histologic ALVAL grade and patient-reported functional outcomes.

Gap balancing technique aims to achieve equal and symmetric gap at full extension and in flexion; however, little is known about the connection between the native and the replaced knee gaps. In this study, a novel robotic assisted ligament tensioning tool was used to measure the pre- and post- operative gaps to better understand their relationship when aiming for balance gaps in flexion and extension. The accuracy of a prediction algorithm for the post-operative gaps based on the native gap and implant alignment was evaluated in this study. The medial and lateral gap were smallest at full extension. The native gaps increase with flexion until 30 degrees where they plateaued for the remaining flexion range. The native lateral gap was larger than the medial gap throughout the flexion range. Planning for equal gaps at extension and flexion resulted with tightest gaps at these angle; however, the gaps in mid-flexion were 3–4 mm larger. Good agreement was observed between the post-operative results and the predicted gas from the software algorithm. The results showed that the native gaps are neither symmetric nor equal. In addition, aiming for equal gaps reduces the variation at these angles but could result in mid- flexion laxity. Advanced robotics-assisted instrumentation can aid in evaluation of soft-tissue and help in surgical planning of TKA. This allows the surgeon to achieve the targeted outcome as well as record the final implant tension to correlate with clinical outcomes.

As a treatment for end-stage elbow joint arthritis, total elbow replacement (TER) results in joint motions similar to the intact joint; however, bearing wear, excessive deformations and/or early fracture may necessitate early revision of failed implant components. Compared to hips, knees and shoulders, very little research has been focused on the evaluation of the outcomes of TER, possible failure mechanisms and the development of optimal designs. The current study aims to develop computational models of TER implants in order to analyze implant behaviour; considering contact stresses, plastic deformations and damage progression.

A geometrical model of a TER assembly was developed based on measurements from a Coonrad-Morrey TER implant (Zimmer, Inc., Warsaw, IN). Ultra high molecular weight polyethylene (UHMWPE) nonlinear elasto-plastic material properties were assigned to the humeral and ulnar bushings. A frictional penalty contact formulation with a coefficient of friction of 0.04 was defined between all of the surfaces of the model to take into account every possible interaction between different implant components in vivo. The loading scenario applied to the model includes a flexion-extension motion, a joint force reaction with variable magnitude and direction and a time varying varus-valgus (VV) moment with a maximum magnitude of 13 N.m, simulating a chair-rise scenario as an extreme loading condition. An explicit dynamic finite element solver was used (ABAQUS Explicit, Dassault Systèmes, Vélizy-Villacoublay, France), due to improved capabilities when performing large deformation analyses. Model results were compared directly with corresponding experimental data. Experimental wear tests were performed on the abovementioned implants using a VIVO (AMTI, Watertown, MA) six degree-of-freedom (6-DOF) joint motion simulator apparatus. The worn TER bushings were scanned after the test using micro computed tomography (µCT) imaging techniques, and reconstructed as 3D models. Comparisons were made based on the sites of damage and deformed geometries between the numerical results and experimental test data. In addition to that, parametric geometrical models were developed using worn geometry of the retrievals in order to account for primary wear and deformations while simulating long-term contact stress and secondary damage progression on the bushings (Fig. 1).

Contact pressure distributions on the humeral and ulnar bushings correlate with the sites of damage as represented by the µCT data and gross observation of clinical retrievals. Furthermore, deformation patterns and kinematics of the components are in good agreement with the experimental results (Fig.2). Excessive plastic deformations are evident in both the numerical and the experimental results close to the regions with high contact pressures. Simulating parametric initially-worn geometries results in the formation of secondary damage zones, as well as redistribution of contact stresses and contact locations (Fig. 3).

The results demonstrate UHMWPE bushing damage due to different loading protocols. Numerical results demonstrate strong agreement with experimental data based on the location of deformation and creep on bushings and exhibit promising capabilities for predicting the damage and failure mechanisms of TER implants.

For figures/tables, please contact authors directly.

Patients with osteoarthritis (OA) of the knee commonly alter their movement to compensate for deficiencies. This study presents a new numerical procedure for classifying sit-to-walk (STW) movement strategies.

Ten control and twelve OA participants performed the STW task in a motion capture laboratory. A full body biomechanical model was used. Participants were instructed to sit in a comfortable self-selected position on a stool height adjusted to 100% of their knee height and then stand and pick up an object from a table in front of them. Three matrices were constructed defining the progression of the torso, feet and hands in the sagittal plane along with a fourth expressing the location of the hands relative to the knees. Hierarchical clustering (HC) was used to identify different strategies. Trials were also classified as to whether the left (L) and right (R) extremities used a matching strategy (bilateral) or not (asymmetrical). Fisher's exact test was used to compare this between groups.

Clustering of the torso matrix dichotomised the trials in two major clusters; subjects leaning forward (LF) or not. The feet and hands matrices revealed sliding the foot backward (FB) and moving an arm forward (AF) strategies respectively. Trials not belonging in the AF cluster were submitted to the last HC of the fourth matrix exposing three additional strategies, the arm pushing through chair (PC), arm pushing through knee (PK) and arm not used (NA). The control participants used the LF+FBR+PK combination most frequently whereas the OA participants used the AFR+PCL. OA patients used significantly more asymmetrical arm strategies, p=0.034.

The results demonstrated that control and OA participants favour different STW strategies. The OA patients asymmetrical arm behaviour possibly indicates compensating for weakness of the affected leg. These strategy definitions may be useful to assess post-operative outcomes and rehabilitation progress.

Objectives

Sagittal alignment of the lumbosacral spine, and specifically pelvic incidence (PI), has been implicated in the development of spine pathology, but generally ignored with regards to diseases of the hip. We aimed to determine if increased PI is correlated with higher rates of hip osteoarthritis (HOA). The effect of PI on the development of knee osteoarthritis (KOA) was used as a negative control.

Objectives

The aim of this study was to examine whether asymmetric loading influences macrophage elastase (MMP12) expression in different parts of a rat tail intervertebral disc and growth plate and if MMP12 expression is correlated with the severity of the deformity.

Purpose

There is a postulated association between increased serum metal ions and pseudotumour formation in patients with metal-on-metal hip replacements. The primary aim of this study was to assess the prevalence of pseudotumour in 31 asymptomatic patients with a large femoral head (LFH) metal-on-metal hip implant. This was compared to the prevalence of pseudotumour in 20 matched asymptomatic patients with a hip resurfacing (HRA) and 24 matched asymptomatic patients with a standard metal-on-polyethylene (MOP) total hip. A secondary objective was to assess possible correlation between increased serum metal ions and pseudotumour formation

Purpose

Dislocation after revision total hip is a common complication. The purpose of this study was to assess whether a large femoral head (36/40mm) would result in a decreased dislocation rate compared to a standard head (32mm).

Purpose

Electrothermal arthroscopic capsulorrhaphy (ETAC) was a technology introduced for orthopaedic surgery without good scientific clinical evidence supporting its use. This multicentre randomized clinical trial provides the scientific clinical evidence comparing ETAC to Open Inferior Capsular Shift (ICS), by measuring disease-specific quality of life at 2-years post-operatively, in patients with shoulder instability due to capsular redundancy.

Purpose

This prospective, expertise-based randomized clinical trial compares arthroscopic to open shoulder stabilization by measuring the disease-specific quality of life outcome in patients with traumatic unidirectional anterior shoulder instability, and determining the incidence of recurrent instability at 2-years post-operatively.

Purpose

The outcome following isolated liner exchange for revision knee arthroplasty, while an attractive option for its simplicity, has a mixed outcome reported in the literature. We report our experience in patients who had a minimum of two years follow-up.

Purpose

The purpose of this study was to compare and evaluate the cost-effectiveness of the MIS Anterolateral Approach to that of the MIS Posterolateral and MIS Direct Lateral Approach.

Introduction

Bearing surfaces used for total hip arthroplasty must have characteristics including bio-compatibility, low friction and low wear rate. Bearing combinations are generally characterised as Soft on Hard/Hard. In general, all newer bearing combinations have reduced wear but may present with other issues that impact on patient outcomes.

Introduction

Bone morphogenetic proteins (BMPs) are members of the TGF-beta superfamily of growth factors and are known to regulate proliferation and expression of the differentiated phenotype of chondrocytes, osteoblasts, and osteoclasts. To investigate the osteoblastic differentiation gene expressions that contribute to BMP-7 dependent ostogenesis, we performed gene expression profiling of BMP-7-treated mouse bone marrow stromal cells.

Purpose: Between 1 and 2% of knee arthroplasties are complicated by infection with its associated patient morbidity. Two stage revision remains the gold standard with the minimum interval considered acceptable between the two stages as 6 weeks, but in some cases can be considerably longer depending on the patients’ clinical response to the first stage and intravenous antibiotics. The interval between the 2 stages is to allow eradication of the causative organism, however, this can result in considerable morbidity for the patient. Patients often have a poor range of movement, instability and considerable discomfort during this time and as a result have poor mobility. Further complications can be encountered at the time of the 2nd stage with considerable scarring of the soft tissues, in part secondary to the lack of mobilisation. Traditionally, spacers which are non-articulating have been used, however, problems of instability, scarring and bone erosion have been reported in the literature. The Prostalac knee spacer constitutes an antibiotic loaded acrylic cement body with a metal on polyethylene surface and enables the patient to undergo rehabilitation in the interval between the 2 stages and may also help maintain soft tissue planes as a result. Previous published results with a mean follow up of 48 months suggest the spacer is just as successful at eradicating infection (91%) as other techniques. The aim of this study is to review 119 patients with a minimum follow up of 5 years.

Method: The Prostalac Knee spacer has 2 components, a femoral and a tibial. Each are made of antibiotic-loaded acrylic cement with a small articulation of metal on polyethylene. The spacers are made from moulds so that a component of a suitable size and thickness could be made. This was a retrospective review of 119 consecutive patients. The inclusion criteria included all patients who had undergone a 2 stage revision with the Prostalac Knee spacer who had more than 5 years of follow up. Patients were assessed using the WOMAC, SF-12, Oxford Knee Score and the Knee Society Score.

Results: Thirteen patients (10.9%) out of a total of 119 had recurrence of infection. This gives an overall rate of control of infection of 89%. Of the 46 patients who completed the outcome score questionnaires with more than 5 years follow up, the mean WOMAC score was 65.9, Oxford Knee score was 61, SF-12 (physical component) was 35.7, SF-12 (mental component) was 54.8.

Conclusion: Although the Prostalac components include polyethylene and metal, they do not seem to have a detrimental impact on the rate of control of infection since our results were similar to those previously reported with other best practice techniques. It is our impression that the Prostalac functional spacer allows earlier pain free mobilisation, allowing the potential for earlier hospital discharge. The savings obtained from earlier hospital discharge greatly outweighing the increased cost of the Prostalac functional spacer system.

Purpose: The purpose of this study was to identify if preoperative pain scores predict postoperative pain and functional outcomes in patients following rotator cuff surgery and if a threshold where increased risk occurs could be established. Establishing a risk threshold may help identify patients who need increased follow-up or rehabilitation.

Method: One hundred six subjects with rotator cuff pathology requiring operative intervention were prospectively followed. The pain subscale of the Shoulder Pain and Disability Index (SPADI) was used as an indicator of pre-operative pain. Postoperative function one year following surgery was determined using the Simple Shoulder Test (SST). Scores with 40% or more deficit (compared to age matched controls) were classified as poor outcomes. The relative risk (RR) of poor SST scores was calculated across different cutoffs for preoperative pain scores.

Results: Having a high preoperative pain score was associated with a poor outcome following rotator cuff surgery at both the six month and one year followup. Preoperative pain scores did predict postoperative functional scores. As preoperative pain levels increased there was a higher risk of poor functional outcomes. The RR of having a poor SST at 1-year was 2.3, if preoperative pain score was greater than 35/50.

Conclusion: The current study indicates that those patients with high preoperative pain scores (> 35/50 or > 70%) are more than twice as likely to have a poor outcome following rotator cuff surgery. This should inform patients and surgeons for postoperative expectations. Whether closer follow-up, pre-rehabilitation, more intensive postoperative rehabilitation or enhanced pain management can alter this prognosis warrants investigation.