Purpose of the study: Revision total hip arthroplasty (rTHA) is associated with higher mortality than primary total hip arthroplasty (pTHA). The functional outcome after rTHA is globally satisfactory but less so than with primary implantation. Nevertheless, data are scarce. Patients undergoing revision procedures are older and have more co-morbid conditions. In this context, we evaluated quality-of-life and patient satisfaction five years after implantation, comparing rTHA versus pTHA. We analyzed the impact of age, obesity, and co-morbid conditions.

Material and methods: The study cohort included all patients undergoing pTHA (n=471) OR rTHA (n=124) in our unit between 1996 and 2000. Five years postoperatively, we noted the Harris hip score (HHS) and patient satisfaction, assessed on a visual analog scale (VAS) from 1 to 10.

Results: The rTHA patients were older (72 yeras versus 68 years, p=0.004), more frequently obese (BMI30: 33% versus 19%, p=0.003) and presented more co-morbid conditions involving medical ( 2: 46% versus 21%, p< 0.001) and orthopedic ( 2: 13% versus 7%, p=0.053) problems. Five years after surgery, quality-of-life and patient satisfaction were much lower after rTHA than after pTHA (HHS < 70; 31% versus 9%, p< 0.001; satisfaction score 8: 68% versus 85%, p< 0.001). Adjustment for the preoprative status (ASA, medical and orthopedic comorbidity, BMI, gender, age) attenuated these differences which nevertheless remained significant [non-adjusted HHS difference: 11.5 (95%CI: 7.4–15.7); adjusted difference: 8.8 (95%CI: 5.5–12.1)]. In both groups, a low HHS was associated with BMI ≥ 30, poor preoperative function, 2 joints affected, elderly age. Obesity was associated with even poorer results after rTHA than after pTHA (non-adjusted difference, p=0.026).

Discussion: Quality-of-life and patient satisfaction at five years were clearly poorer after rTHA than after pTHA. This is in agreement with data in the literature. The difference is explained in particular by greater patient age and more associated comorbidities for rTHA. Obesity is a prognostic factor which is more unfavorable after rTHA than after pTHA.

Conclusion: Considering the risks and benefits of revision surgery, it is important to recognize not only the surgical factors but also the characteristic features of the patients.

Objective: To evaluate the outcome of open reduction and internal fixation of displaced proximal humerus fractures using a new locking plate.

Design: Prospective.

Setting: Level I university center.

Patients: Twenty-eight women and 22 men (mean age, 62.9 ± 19.l years). Twenty-nine patients were 65 years of age or older (mean age, 76.8 years). Fractures were classified according to AO/OTA as 11-A2 (n=3), A3 (n=12), B1 (n=4), B2 (n=18), B3 (n=1), C1 (n=1), and C2 (n=11). Mean follow-up was 19.8 months (range, 12 to 39 months).

Intervention: Open reduction and internal fixation with a proximal humerus locking plate.

Main Outcome Measurements: Raw and adjusted (sex and age) Constant score.

Results: Forty patients were available for follow-up. The mean raw Constant score was 66.6 (adjusted, 82.0). In patients under 65, the raw Constant score was 78.2 (adjusted score, 86.7). In patients over 65, the raw Constant score was 56.1 (adjusted score, 77.8). An excellent or good result was found in 72.5% overall. There was no secondary loss of position or implant cut-out. Seven patients (17.5%) developed avascular necrosis (AVN), 6 in C2 fractures in the older group. Their mean adjusted score was 60.7, as compared to 86.6 ± in those without AVN (p = 0.001).

Conclusions: The outcome was equally good in the younger and older age groups of patients, except in those who developed avascular necrosis. While the latter might be due to the nature of the fracture, it is also possible that surgical technique plays a role.

Introduction One of the most difficult aspects of shoulder arthroplasty is retroversion. The ideal angle is about 30 of posterior rotation of humeral head with regard to the frontal plane so that the humeral head squarely faces the glenoid surface in the resting position. The axis, lateral epicondyle- medial epicondyle is often taken as reference and serves as landmark in many arthroplasty instrumentation. [1,2]

Clinical experience has shown that estimating a 30 angle in space is definitely not easy even with the help of diverse goniometers.

Methods Each operator has to put 3 prostheses with a 30 degrees retroversion according to the position of the forearm so we had proceeded to 52 putting of prostheses .

The measures were made by taking into account of the humerus axis, the plan of condyles and angle of inclination of the collar, given by the angle of cutting. Three barycentres of the three humeral sections have determined the humeral axis. The condylar axis is determined from the 2 barycentres of the digitalized points on the anterior articular condylar surfaces. These 2 axis determine the frontal plane on which a reference mark R(x, y, z) is attached with Z lined up with the humeral shaft and X lined up on the condyles. Different angles could then be determined.

In the sagittal plan (perpendicular in the humeral axis), the retroversion angles of the prosthesis and the angle of cutting are calculated.

Results The standard deviation of the retroversion angle of the prosthesis is 14,22 which is really too high. In fact, 4 prostheses were inserted with poor retroversion (17°, 17°, 18°, 4,4°) and 20 with excessive retroversion (max =65°). This retroversion angle is not dependant on the other factors (cut angle, inclination angle...) The implant height was not taken into account

Conclusions Only 28 of the prostheses were placed in the right orientation within 20° to 40° of retroversion angle. It shows the difficulties to place a shoulder prosthesis in good position.even in standard conditions and with the standard marks.

Purpose: Fracture of the lateral process of the talus is exceptional. Diagnosis may be missed in 50% of patients, the fracture often being confused with severe ankle sprain. Through the seventies, less than 60 cases were reported in the literature. We report a retrospective study of seven cases treated surgically between 1990 and 2001.

Material and methods: We examined the different mechanisms leading to fracture of the lateral process of the talus and propose a therapeutic algorithm. All patients were seen at follow-up consultations. We used the AOFAS hindfoot evaluation scale, radiographs (anteroposterior view of the ankle and 3/4 lateral view of the foot, Broden views). Outcome was scored excellent, fair, or poor. Mean patient age was 33 years (20–51). Mean follow-up was six years (1–12). The patients incurred the fracture during a snowboard accident (n=1), motocycle accidents (n=3), defenestration (n=1), and mountain climbing accidents (n=2). Fractures resulted from forced eversion in one patient and high-energy trauma in six. Fracture classification according to Hawkins was type 1 (n=4, type 2 (n=3), and type 3 (n=1). Time from the accident to diagnosis was less than 15 days except in one patient where the diagnosis was made ten months after the trauma. Associated lesions were subtalar dislocation (n=2), talar neck fracture (n=1), medial malleolar fracture (n=1), and open fracture of the first cuneiform (n=1). The procedure consisted in fixation of the fragments without resection in four cases, resection of small fragments and fixation of large fragments in two, and osteotomy of a deformed callus of the lateral process of the talus in one. Weight bearing was not allowed four six weeks except in one patient with subtalar dislocation whose calcaneotalar pin was withdrawn at eight weeks.

Results: Complications were one case of superficial infection which resolved with antibiotic treatment and two cases of subtalar osteoarthritis at more than ten years. The overall score was 85 on average. The outcome was excellent in six cases and poor in one.

Discussion: A review of the literature shows that fracture of the lateral process of the talus occurs in 1% of all ankle lesions. Five mechanisms have been described. The two most frequent are ankle inversion in dorsiflexion and high-energy trauma. The three other mechanisms are eversion, direct trauma and stress fracture. The consequences of inadequate treatment include: late healing, non-union, deformed callus (one case in our series), avascular necrosis, subtalar instability, and joint incongruency with risk of subtalar and/or talofibular osteoarthrosis. The appropriate treatment depends on the time of diagnosis, the size and nature of the fracture and the degree of displacement. The therapeutic algorithm used in Geneva is as follows: orthopaedic treatment (plaster resting boot for six weeks followed by physiotherapy) associated with close surveillance in the event of a fracture measuring less than 5 mm which is generally extra- articular. If the patient considers this treatment is insufficient, removal of the fragment can be proposed. For fractures measuring more than 1 cm, which are generally intra-articular, surgical treatment is needed if the fragment is displaced more than 2 mm. In the event of late diagnosis, it may be necessary to remove the fragment or perform subtalar arthrodesis, or as needed resection of a deformed callus. If the diagnosis is established early and appropriate treatment given, the results have been excellent at six years.

Aims: To describe the proþle of patients older than 65 years of age with a fracture of the upper extremity, and the consequence of such an injury. Methods: Retrospective cohort study of 667 patients presenting to the emergency department between January 1999 and December 2000 with a fracture of the upper extremity. Variables included sex, age, location of fracture (± additional fractures), treatment, length of stay (in hospital and convalescent care), and place of habitation before and after injury. Follow-up continued until patientsñ deþnitive residential status. Results: The majority of patients were women with fractures of the wrist and proximal humerus. 42% were treated and returned to their previous residence. 37% were admitted to the hospital, of whom 90% had an operation; 97% returned to their previous residence. 21% of patients did not require an operation, but were unable to function independently and were admitted directly to our Geriatrics Hospital. This group was signiþcantly older and more frequently sustained a fracture of the proximal humerus or 2 fractures. 20% required long-term placement. Conclusions: Fractures of the upper extremity in this age group are frequent. A particular subset of signiþcantly older patients are unable to function independently, thus requiring hospitalization, extended periods of convalescence, and a greater likelihood of a permanent change in habitation.

Aims: To determine the precision of conventional versus computer assisted techniques for positioning the acetab-ular component in total hip arthroplasty (THA). Methods: Using a lateral approach, 150 cups were placed by 10 different surgeons in 10 identical plastic pelvis models. Only the immediate operating þeld was visible. Preoperative planning was performed with a computerized tomographic scan. Fifty cups were placed free hand, 50 others with the standard cup ancillary, and the remaining 50 cups using computer-assisted orthopaedic surgery. The accuracy of cup abduction and ante-version was assessed with an electromagnetic system. Results: Using conventional techniques, free hand placement revealed a mean precision of cup anteversion and abduction of 10¡ [range: 5.5–14] and 3.5¡ [2.5–5] respectively. With the cup positioner, these angles measured 8¡ [5–10.5] and 4¡ [3–5.5] respectively, and using the computer assisted method, the mean cup anteversion precision was 1.5¡ [1–2] and mean cup abduction measured 2.5¡ [2–3.5]. Conclusions: Computer assisted cup placement is a very accurate and reproducible technique during THA. It is clearly more precise than either of the two traditional methods of cup positioning, even for well-trained surgeons.

Aims: The diagnosis of a prosthetic joint infection is difþcult, but crucial for appropriate treatment. Scintigraphy with speciþc markers for infection (labeled white cells or immunoglobulin-G) has been reported as a more reliable diagnostic tool than clinical assessment (fever, þstula), laboratory studies [polynuclear neutrophils blood count (PNC), erythrocyte rate sedimentation (ESR), and C-reactive protein (CRP)], and preoperative aspiration. Methods: In the þrst part of this study, we retrospectively reviewed 230 patients admitted with a suspected prosthetic joint infection and compared the validity of these different diagnostic tools. 209 patients had an infection. Results: Pain, fever, ESR, and PNC are unreliable for identifying occult infection. The presence of a þstula is inconstant, but when present is very reliable to detect infection. Our study revealed sensitivity, speciþcity, positive and negative predictive value as follows: CRP: 97%, 81%, 98%, 71% respectively; aspiration: 82%, 94%, 99%, 43% respectively, and labelled scintigraphy 74%, 76%, 91%, 44% respectively. In the second part, we reviewed 23 articles which included 1,722 prosthetic joints with preoperative evaluation of infection. Conclusions: Both our study and the literature review indicate that CRP and joint aspiration are the best tools to diagnose prosthetic joint infection.

Purpose: Heterotopic ossification is a recognised complication after total hip arthroplasty. Prevalence can reach 53%, particularly if prophylaxis is not given, leading to postoperative pain and limiting the functional prognosis. Non-steroidal antiinflammatory drugs have proven efficacy but also present the risk of gastroduodenal toxicity making postoperative administration hasardous. Recently, selective COX-2 inhibitors have been shown to have a similar antiinflammatory activity with a clear reduction in gastrointestinal disorders. We hypothesised that selective COX-2 inhibitors could be as effective as classical NSAID for the prevention of heterotopic ossifications.

Material and methods: This clinical trial was conducted according to a prospective randomised protocol comparing a group of patients given prophylaxis with Celecoxib (Celebrex®) and another group of patients given ibuprofen (Brufen®). All patients scheduled for total elective prostheses were radomised in a prospective manner to one of the two groups, either Celecoxib 200mg b.i.d. or ibuprofen 400mg t.i.d. for ten immediate postoperative days. Radiological assessment was performed by two independent investigators blinded to the study (an orthopaedic surgeon and a radiologist) who scored calcifications according to the Brooker classification (type I to IV) at three months after surgery. Reproducibility of radiogram reading was tested and analysed with a kappa test K=0.74).

Results: Two hundred ten patients were randomised and 73 have had their three-month radiograms. The Cele-coxib group included 37 patients: 24 with Brooker stage 0, eleven with stage 1, two with stage 2. The ibuprofren group included 42 patients, 15 with Brooker 0, 16 with Brooker 1; nine with Brooker 2 and two with Brooker 3. The statistical analysis will be performed at the end of this study (June 2002).

Discussion: The preliminary results show that Celecoxib appears to have the same efficacy as ipubrofen for the prevention of heterotopic ossification after total hip arthroplasty. There was a clear trend in favour of Celecoxib.

The aim of the study was to determine the precision of conventional versus computer-assisted techniques for positioning the acetabular component in total hip arthroplasty (THA).

Malposition of the acetabular component during THA increases the occurrence of impingement, reduces range of motion, and increases the risk of dislocation and long-term wear. To prevent malpositioned hip implants, an increasing number of computer assisted surgery systems have been described, but their accuracy is not well established.

Using a lateral approach, 150 cups were placed by 10 different surgeons in 10 identical plastic pelvis models. Only the immediate operating field was visible. Pre-operative planning was performed with a computerised tomography scan. Fifty cups were placed free hand, 50 others with the standard cup positioner, and the remaining 50 cups using computer-assisted orthopaedic surgery (Medivision). The accuracy of cup abduction and anteversion was assessed with an electromagnetic system (Fastrak™).

Using conventional techniques, free hand placement revealed a mean precision of cup anteversion and abduction of 10° [range 5.5 to 14] and 3.5° [2.5 to 5] respectively. With the cup positioner, these angles measured 8° [5 to 10.5] and 4° [3 to 5.5] respectively, and using the computer assisted method, the mean cup anteversion precision was 1.5° [1 to 2] and mean cup abduction measured 2.5° [2 to 3.5].

Computer assisted cup placement is a very accurate and reproducible technique during THA. It is clearly more precise than either of the two traditional methods of cup positioning, even for well-trained surgeons.

To determine the precision of conventional versus computer assisted techniques for positioning the acetabular component in total hip arthroplasty (THA).

Malposition of the acetabular component during THA increases the occurrence of impingement, reduces range of motion, and increases the risk of dislocation and long-term wear. To prevent malpositioned hip implants, an increasing number of computer assisted surgery systems have been described, but their accuracy is not well established.

Using a lateral approach, 150 cups were placed by 10 different surgeons in 10 identical plastic pelvis models. Only the immediate operating field was visible. Pre-operative planning was performed with a computerised tomography scan. Fifty cups were placed free hand, 50 others with the standard cup positioner, and the remaining 50 cups using computer-assisted orthopaedic surgery (Medivision). The accuracy of cup abduction and anteversion was assessed with an electromagnetic system (Fastrak™).

Using conventional techniques, free hand placement revealed a mean precision of cup anteversion and abduction of 10° (range 5.5 to 14) and 3.5° (2.5 to 5) respectively. With the cup positioner, these angles measured 8° (5 to 10.5) and 4° (3 to 5.5) respectively, and using the computer assisted method, the mean cup anteversion precision was 1.5° (1 to 2) and mean cup abduction measured 2.5° (2 to 3.5).

Computer assisted cup placement is a very accurate and reproducible technique during THA. It is clearly more precise than either of the two traditional methods of cup positioning, even for well-trained surgeons.

Purpose: The Less Invasive Stabilisation System (LISS) for fixation of the proximal femur is an automatic preformed fixator with three sizes. The self-perforating self-threading screws are locked into the plate fixator providing angular stability. Unlike conventional implants, the LISS plate is not applied directly to the bone, avoiding friction forces and periosteal damage. Precise adaptation of the implant to the form of the bone is not necessary. The system can also be easily and rapidly used as a “gliding” plate. After reduction via a proximal incision, the plate-fixator is inserted between the anterior tibial muscle and the periosteum and fixed with monocortical screws inserted percutaneously.

Material and methods: Between January 1999 and August 2000, we treated 18 multiple trauma patients with fractures of the proximal femur in 17 patients (nine men and eight women) using the LISS in a prospective multicentric study. Mean age was 50 years (20–89), median, 43 years). The AO classification of the fractures was four type A, four type B, and 13 type C. There were 14 open fractures. We used the LISS in one patient to stabilise a valgus osteotomy. One patient had a 41-C2.3 (Schatzker type VI) fracture with a compartment syndrome. Bone allographs were used in two cases. Clinical and radiographic follow-up data was collected at 6, 12, 24 and 48 weeks.

Results: Two foreign subjects with 41-A3 and 41-B1 fractures were lost to follow-up. For the other patients, bone healing was achieved between six and twelve weeks. Mean follow-up was ten months (three to twenty months). We had one complication, the compartment syndrome mentioned above, which healed without sequelae after fasciotomy and secondary thin skin graft. Joint motion was symmetrical and pain free in all patients three months after surgery. There were no nerve or vessel lesions secondary to epiperiosteal displacement of the fixator, and no case of infection or loosening. We did however observe secondary loss of reduction with development of minimal varus in three patients with complex fractures.

Conclusions: These preliminary results with the LISS demonstrate its usefulness as an alternative to conventional fixation systems. It is undoubtedly a most useful method for intra-articular and metaphyseal fractures with diaphyseal fracture lines and for fractures with two levels. Complications appear to depend on the type of fracture and the quality of the reduction, as with other types of fixators.