Abstract
Introduction
Pedicle screw fixation is considered gold standard as it provides stable and adequate fixation of all the three columns of spine. Mal-placement of screws in dorso-lumbar region, using fluoroscopic control only, varies from 15% to 30 %. The aim of this study was to determine whether accuracy of pedicle screw placement can be improved using CT based navigation technique.
Material & methods
15 patients with fracture of D12 in 4 patients, L1 in 6 patients, L2 in 4 patients, and L4 in 1 patient underwent pedicle screw fixation using CT based navigation. Each fracture was fixed with 4 pedicle screws, 2 each in one level above and one level below the fractured vertebrae. A total of 60 pedicle screws was inserted. A pre-operative 1mm slice planning CT scan was taken from two levels above to two levels below the fractured vertebrae. It was loaded into the workstation and pre-operative planning was made of screw trajectory and screw size i.e. thickness and length, according to the dimensions of the pedicle and vertebral body. Screws were then inserted using opto-electronic navigation system. Screw placement was analysed in all patients using post-operative CT scan and graded according to the Laine's system.
Results
The average time for matching was 10.8 minutes and average time for screw insertion was 4.3 minutes (range 2-8 minutes). One screw in right sided pedicle of L2 perforated the lateral cortex (1.66%). There was no neuro-vascular complication.
Conclusion
The incidence of a misplaced screw in the present study is only 1.66% which is much less than reported with conventional technique, reflecting enhanced accuracy with computer assisted navigation. Thus computer assisted navigation is a potent tool in the hands of a spine surgeon in improving the accuracy of pedicle screw placement.
