Abstract
Introduction
Total disc replacement (TDR) provides an alternative to fusion that is designed to preserve motion at the treated level and restore disc height. The effects of TDR on spine biomechanics at the treated and adjacent levels are not fully understood. Thus, the present study investigated facet changes in contact pressure, peak contact pressure, force, peak force, and contact area at the facet joints after TDR.
Methods
Seven fresh-frozen human cadaveric lumbar spines were potted at T12 and L5 and installed in a 6-DOF displacement-controlled testing system. Displacements of 15° flexion/extension, 10° right/left bending, and 10° right/left axial rotation were applied. Contact pressure, peak contact pressure, force, peak force and contact area for each facet joint were recorded at L2-L3 and L3-L4 before and after TDR at L3-L4 (ProDisc-L, Synthes Spine). The data were analysed with ANOVAs/t-tests.
Results
Axial rotation had the most impact on contact pressure, peak contact pressure, force, peak force, and contact area in intact spines. During lateral bending and axial rotation, TDR resulted in a significant increase in facet forces at the level of treatment and a decrease in contact pressure, peak contact pressure, and peak force at the level superior to the TDR. With flexion/extension, there was a decrease in peak contact pressure and peak contact force at the superior level.
Conclusion
Our study demonstrates that rotation is the most demanding motion for the spine. We also found an increase in facet forces at the treated level after TDR. To our knowledge, we are the first to show a decrease in several biomechanical parameters after TDR at the adjacent superior level in a cadaveric model. In general, our findings suggest there is an increase in loading of the facet joints at the level of disc implantation and an overall unloading effect at the level above.
