Abstract
Measurement of precision in positioning multiple autologous osteochondral transplantation in comparison to the conventional free hand technique.
The articular surfaces of 6 cadaveric condyles (medial – lateral) were used. The knee was referenced by a navigation system (Praxim). The pins carrying the navigation detectors were positioned to the femur and to the tibia. The grafts were taken from the donor side (measurement I) with the special instrument which carried the navigation detectors. The recipient site was prepared and the donor osteochondral grafts were forwarded to the articular surface (II). The same procedure took place without navigation. The articular surface congruity was measured with the probe (measurement III)
The angle of the recipient plug removal (measurement I) with the navigation technique was 3,27° (SD 2,05°; 0°–9°). The conventional technique showed 10,73° (SD 4,96°; 2°–17°). For the recipient plug placement (measurement II) under navigated control a mean angle of 3,6° (SD 1,96°; 1°–9°) was shown, the conventional technique showed results with a mean angle of 10,6° (SD 4,41°; 3°–17°). The mean depth (measurements III) under navigated control was 0,25mm (SD 0,19mm; 0mm–0,6mm). With conventional technique the mean depth was 0,55mm (SD 0,28mm; 0,2mm –1,1mm).
The application of navigation showed that complications like diverging of the grafts leading to breakage or loosening as well as depth mismatch which can lead to grafts sitting over or under the articular surface can be avoided providing better results in comparison to the free hand procedure
Correspondence should be addressed to Anastasia C. Tilentzoglou MD, General Secretary of the Board of Directors of HAOST, 20 A. Fleming Str. (N.Filothei), Gr. 15123 Maroussi, Athens Greece. E-mail: info@eexot.gr
