P33 DETERMINING IN-VIVO PERFORMANCE OF METAL ON METAL BEARING HIP ARTHROPLASTY WITH EXERCISE RELATED RISE IN COBALT LEVELS

Abstract

In-vitro studies have shown that wear rates of the metal on metal (MOM) bearing hip prostheses decline once the bearing runs-in and the bearing subsequently enters a steady state wear phase. Baseline cobalt levels are thus expected to decline with time in patients. Several clinical studies have not found such a decline. Baseline cobalt levels are hence limited in their capacity to provide information on the wear performance of the bearing couple. We have demonstrated in a previous study that exercise causes a rise in plasma metal ion levels in patients with MOM bearing hip replacement. Would the exercise related cobalt rise be more sensitive to detect change in wear behaviour of the bearing couple? We tested the alternate hypothesis that exercise related rise in the plasma cobalt levels will correlate inversely with the duration of MOM implantation.

Sixteen patients with three different well functioning MOM bearing hip replacement [two types of resurfacing (BHR, Cormet) and Metasul] were included into the study. Patients were divided in to two groups based on time since implantation, an early group of mean 18 months and a late group of mean 57 months. Plasma levels of cobalt were measured before (baseline) and after 1 hour of maximal exercise (peak). The difference between baseline and peak for each patient provided the exercise related cobalt rise. A significant increase in plasma cobalt levels of 13% was noticed after the exercise (p < 0.005). Baseline Cobalt levels in the late group (53nmol/l) were higher than early group (44nmol/l) but the difference was not significant (p=0.45). However, the mean exercise related Cobalt rise levels was lower in late group (3.5nmol/l) than the early group (6.5nmol/l). This lower rise in cobalt level in the late group precisely reflects on the steady state wear as seen in in-vitro tests.

Baseline cobalt levels are limited in determining the in-vivo performance of the bearing couple. Exercise related rise in cobalt levels can differentiate the running in and steady state wear phases of metal on metal bearings and is thus a more accurate tool of assessing in-vivo wear performance of the bearing couple.